Synthesis of thiol-derivatized porphyrin dimers and trimers for studies of architectural effects on multibit information storage

We present the rational design and synthesis of multiporphyrin arrays containing thiol-derivatized linkers for the purpose of multibit molecular information storage. Porphyrin dimers and trimers were synthesized by the Pd-mediated coupling of iodo-substituted and ethynyl-substituted porphyrin building blocks in 5-51% yields. Each porphyrin dimer bears one S-acetylthio group. The architecture of the trimers incorporates a trans-substituted porphyrin (central) bearing two S-acetylthio groups and two diphenylethyne-linked porphyrins (wings) in a trans geometry. The central porphyrin and the wing porphyrins bear distinct substituents and central metals, thereby affording different oxidation potentials. The S-acetylthio groups provide a means for attachment of the arrays to an electroactive surface. The dimers are designed for vertical orientation on an electroactive surface while the trimers are designed for horizontal orientation of the central porphyrin. Altogether seven different arrays were synthesized. Each array forms a self-assembled monolayer (SAM) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each array is electrochemically robust and exhibits multiple, reversible oxidation waves. In general, however, the trimeric arrays appear to form more highly ordered monolayers that exhibit sharper, better-defined redox features.     

Facile formation of a meso-meso linked porphyrin dimer catalyzed by a manganese(IV)-oxo porphyrin

A manganese(IV)-oxo porphyrin catalyzes C-C bond formation between zinc porphyrins at the meso-position with a two-electron oxidant to afford the meso-meso linked porphyrin dimer efficiently. The meso-meso linked dimer is formed via formation of the porphyrin radical cation, and the rate-determining step in the catalytic cycle is the formation of a manganese(IV)-oxo porphyrin with a two-electron oxidant.     

Synthesis of Linear Amphipathic Porphyrin Dimers and Trimers: An Approach to Bilayer Lipid Membrane Spanning Porphyrin Arrays

A modular building-block approach has been developed for the construction of linear amphipathic porphyrin arrays. The reaction of meso-(trifluoromethyl)dipyrromethane and an aldehyde under the conditions of the two-step room temperature porphyrin synthesis affords the trans-substituted porphyrin (13-56% yields). A similar reaction with two different aldehydes provides access to porphyrins bearing two different functional groups. An ethyne porphyrin and an iodo porphyrin (either free base or zinc) are selectively joined via Pd(0)-catalyzed coupling reactions, affording a linear array with porphyrins in defined metalation states. Coupling of a zinc-porphyrin bearing iodo and ester groups with a free base porphyrin bearing ethyne and ester groups yielded the zinc-free base porphyrin dimer. Coupling of a bis-ethyne porphyrin with a porphyrin bearing iodo and ester groups afforded the porphyrin trimer. Cleavage of the esters yielded the amphipathic porphyrin dimer and trimer arrays. The arrays with adjacent zinc and free base porphyrins undergo efficient electronic energy transfer. Both amphipathic porphyrin arrays have been incorporated into L-alpha-phosphatidylcholine vesicles. This versatile synthetic strategy provides access to a family of porphyrin arrays for studies of photophysical processes in supramolecular assemblies.     

Directly linked porphyrin arrays

The Ag(I)-promoted oxidative meso-meso coupling reaction of 5,15-diaryl Zn(II)-porphyrin was serendipitously found in the course of our synthetic approaches towards photosynthetic reaction centers. Based on this reaction, a variety of directly linked and fused porphyrin arrays have been synthesized, including linear meso-meso-linked porphyrin arrays, windmill- and grid-shaped porphyrin arrays, meso-beta singly linked diporphyrins, beta-beta linked diporphyrins, meso-beta doubly linked (fused) diporphyrins and oligoporphyrins, meso-meso beta-beta doubly linked (fused) diporphyrins, and meso-meso beta-beta-beta-beta triply linked (fused) diporphyrins. The meso-meso coupling reaction of 5,15-diaryl Zn(II)-porphyrins is advantageous considering its high regioselectivity as well as its ease of extension to large porphyrin arrays as is demonstrated by the synthesis of a discrete meso-meso-linked 128-mer and poly(5,15-porphyrinylene). Finally, the oxidation of end-phenyl capped meso-meso-linked zinc porphyrins with DDQ-Sc(OTf)(3) gave pi-conjugated flat porphyrin tapes. To the best of our knowledge, the meso-meso linked 128-mer is the longest man-made discrete molecule, and the porphyrin tape 12-mer is the most extensively conjugated porphyrin array, as evinced by the lowest electronic band peak at 3500 cm(-1).     

Synthesis of "Porphyrin-linker-Thiol" molecules with diverse linkers for studies of molecular-based information storage

The attachment of redox-active molecules such as porphyrins to an electroactive surface provides an attractive approach for electrically addressable molecular-based information storage. Porphyrins are readily attached to a gold surface via thiol linkers. The rate of electron transfer between the electroactive surface and the porphyrin is one of the key factors that dictates suitability for molecular-based memory storage. This rate depends on the type and length of the linker connecting the thiol unit to the porphyrin. We have developed different routes for the preparation of thiol-derivatized porphyrins with eight different linkers. Two sets of linkers explore the effects of linker length and conjugation, with one set comprising phenylethyne units and one set comprising alkyl units. One electron-deficient linker has four fluorine atoms attached directly to a thiophenyl unit. To facilitate the synthesis of the porphyrins, convenient routes have been developed to a wide range of aldehydes possessing a protected S-acetylthio group. An efficient synthesis of 1-(S-acetylthio)-4-iodobenzene also has been developed. A set of porphyrins, each bearing one S-acetyl-derivatized linker at one meso position and mesityl moieties at the three remaining meso positions, has been synthesized. Altogether seven new aldehydes, eight free base porphyrins and eight zinc porphyrins have been prepared. The zinc porphyrins bearing the different linkers all form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each porphyrin is electrochemically robust and exhibits two reversible oxidation waves.     

Androgynous porphyrins. Silver(II) quinoxalinoporphyrins act as both good electron donors and acceptors

The metal-centered and macrocycle-centered electron-transfer oxidations and reductions of silver(II) porphyrins were characterized in nonaqueous media by electrochemistry, UV-vis spectroelectrochemistry, EPR spectroscopy, and DFT calculations. The investigated compounds are {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrinato}silver(II), {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)quinoxalino[2,3-b']porphyrinato}silver(II), {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)bisquinoxalino[2,3-b':7,8-b']porphyrinato}silver(II), and {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)bisquinoxalino[2,3-b':12,13-b']porphyrinato}silver(II). The first one-electron oxidation and first one-electron reduction both occur at the metal center to produce stable compounds with Ag(III) or Ag(I) metal oxidation states, irrespective of the type of porphyrin ligand. The electrochemical HOMO-LUMO gap, determined by the difference in the first oxidation and first reduction potentials, decreases by introduction of quinoxaline groups fused to the Ag(II) porphyrin macrocycle. This provides a unique androgynous character to Ag(II) quinoxalinoporphyrins that enables them to act as both good electron donors and good electron acceptors, something not previously observed in other metalloporphyrin complexes. The second one-electron oxidation and second one-electron reduction of the compounds both occur at the porphyrin macrocycle to produce Ag(III) porphyrin pi-radical cations and Ag(I) porphyrin pi-radical anions, respectively. The macrocycle-centered oxidation potentials of each quinoxalinoporphyrin are shifted in a negative direction, while the macrocycle-centered reduction potentials are shifted in a positive direction as compared to the same electrode reactions of the porphyrin without the fused quinoxaline ring(s). Both potential shifts are due to a stabilization of the radical cations and radical anions by pi-extension of the porphyrin macrocycle after fusion of one or two quinoxaline moieties at the beta-pyrrolic positions of the macrocycle. Introduction of quinoxaline groups fused to the Ag(II) porphyrin macrocycle provides a unique androgynous character to Ag(II) quinoxalinoporphyrins that enables them to act as both good electron donors and good electron acceptors.     

Covalent Template-Directed Synthesis of a Spoked 18-Porphyrin Nanoring**

Rings of porphyrins mimic natural light-harvesting chlorophyll arrays and offer insights into electronic delocalization, providing a motivation for creating larger nanorings with closely spaced porphyrin units. Here, we demonstrate the first synthesis of a macrocycle consisting entirely of 5,15-linked porphyrins. This porphyrin octadecamer was constructed using a covalent six-armed template, made by cobalt-catalyzed cyclotrimerization of an H-shaped tolan with porphyrin trimer ends. The porphyrins around the circumference of the nanoring were linked together by intramolecular oxidative meso-meso coupling and partial β-β fusion, to give a nanoring consisting of six edge-fused zinc(II) porphyrin dimer units and six un-fused nickel(II) porphyrins. STM imaging on a gold surface confirms the size and shape of the spoked 18-porphyrin nanoring (calculated diameter: 4.7 nm).     

Control over the oxidative reactivity of metalloporphyrins. Efficient electrosynthesis of meso,meso-linked zinc porphyrin dimer

The electrochemical oxidation of zinc(II) 5,15-p-ditolyl-10-phenylporphyrin at its first oxidation potential leads to the formation of the corresponding meso-meso porphyrin dimer as the main product. The number of electrons abstracted, the addition of the hindered base 2,6-lutidine as well as operating in DMF, instead of a CH(2)Cl(2)/CH(3)CN mixture are the key parameters to obtain high yields of the desired coupling product. Indeed, when the electrolyses are carried out in the CH(2)Cl(2)/CH(3)CN mixture, the unexpected zinc(II) 5-chloro-10,20-p-ditolyl-15-phenyl porphyrin is produced as a by-product, the chlorine atom originating from the CH(2)Cl(2) solvent. The monomer and the dimer are characterised by electrochemical analysis. The signature of the dimer is clearly distinguished on the cyclic voltammogram of the monomer on condition of the prior addition of 2,6-lutidine as a hindered base, indicating that the dimerisation process is thus strongly accelerated. Besides, unprecedented X-ray crystallographic structures of the monomer and the meso-meso dimer are presented and their respective structural parameters are compared.     

A giant supramolecular light-harvesting antenna-acceptor composite

A giant light-harvesting antenna-acceptor composite was constructed by heterodimerization of imidazolylmanganese(III)porphyrin to molecular terminals of the zinc porphyrin array composed of meso-meso linked bis(imidazolylzincporphyrin). Fluorescence quenching titration indicated that the terminal imidazolylmanganase(III)porphyrin quenched excited zinc porphyrin separated by a large number of intervening porphyrins and that the meso-meso linked bis(imidazolylzincporphyrin) array was an efficient light-harvesting antenna.     

Long-lived charge-separated state generated in a ferrocene-meso,meso-linked porphyrin trimer-fullerene pentad with a high quantum yield

A meso,meso-linked porphyrin trimer, (ZnP)3, as a light-harvesting chromophore, has been incorporated for the first time into a photosynthetic multistep electron-transfer model including ferrocene (Fc) as an electron donor and fullerene (C60) as an electron acceptor, to construct the ferrocene-meso,meso-linked porphyrin trimer-fullerene system Fc-(ZnP)3-C60. Photoirradiation of Fc-(ZnP)3-C60 results in photoinduced electron transfer from both the singlet and triplet excited states of the porphyrin trimer, 1(ZnP)3* and 3(ZnP)3*, to the C60 moiety to produce the porphyrin trimer radical cation-C60 radical anion pair, Fc-(ZnP)3*+-C60*-. Subsequent formation of the final charge-separated state Fc+-(ZnP)3-C60*- was confirmed by the transient absorption spectra observed by pico- and nanosecond time-resolved laser flash photolysis. The final charge-separated state decays, obeying first-order kinetics, with a long lifetime (0.53 s in DMF at 163 K) that is comparable with that of the natural bacterial photosynthetic reaction center. More importantly, the quantum yield of formation of the final charge-separated state (0.83 in benzonitrile) remains high, despite the large separation distance between the Fc+ and C60*- moieties. Such a high quantum yield results from efficient charge separation through the porphyrin trimer, whereas a slow charge recombination is associated with the localized porphyrin radical cation in the porphyrin trimer. The light-harvesting efficiency in the visible region has also been much improved in Fc-(ZnP)3-C60 because of exciton coupling in the porphyrin trimer as well as an increase in the number of porphyrins.     

Diastereochemically controlled porphyrin dimer formation on a DNA duplex scaffold

DNA-porphyrin conjugates were designed and synthesized for the preparation of the conformationally controlled porphyrin dimer structures constructed on a d(GCGTATACGC)2. Porphyrin derivatives were introduced to the central TATpA sequence where p represents the phosphoramidate for the attachment of the free-base porphyrin (FbP) and zinc-coordinated porphyrin (ZnP), which allows contact of the two porphyrins in the minor groove. The porphyrin dimers were characterized using CD, UV-vis, steady-state, and time-resolved fluorescence spectroscopies, indicating that the porphyrins form face-to-face conformations. Also the co-facial conformation was confirmed by comparison with spectra of the non-self-complementary duplex containing one porphyrin moiety. Introduction of zinc into porphyrin moiety destabilized the duplex formation. Two diastereomers showed different thermal stabilities and affected the conformations of porphyrin dimers. The temperature-dependent assembly and the conformational change of the porphyrin dimer on the duplex DNA were observed in the UV-vis spectra, indicating that the dynamic movement of the porphyrin dimer occurs on the duplex. The results indicate that the porphyrin dimers of DNA-FbP conjugates are overlapped clockwise and are located in the minor groove of the usual B-form DNA backbone. The interaction and conformation of two porphyrin moieties are controlled by the following three factors: (1) temperature change during and after formation of the duplex porphyrins at lower temperature; (2) diastereochemistry of the phosphoramidates where porphyrins are connected via a linker; and (3) zinc ion coordination that destabilizes the interaction of porphyrins as well duplex formation.     

The synthesis of covalently linked tetraarylporphyrin dimers

A new and general synthesis of porphyrin dimers is described. The synthesis involves the reaction of dibromoalkanes with phenolic porphyrins, such as 5(4-hydroxyphenyl)-10,15,20-tritolylporphyrin, to form σ-bromoalkyl porphyrin ethers. The latter compounds are then reacted with a second phenolic porphyrin to give porphyrin dimers. A mixed metalloporphyrin dimer has been prepared which contains both V(IV) and Cu(II). The compounds have been examined spectroscopically. The free-base porphyrin dimers show a splitting of the intense Soret band. This is interpreted as indicative of weak singlet energy transfer between the covalently linked porphyrins.     

Dynamics of closure of zinc bis-porphyrin molecular tweezers with copper(II) ions and electron transfer

Zinc bis-porphyrin molecular tweezers composed of a N(4) spacer bound through pyridyl units to the meso position of porphyrins were synthesized, and the tweezers are closed by the coordination of a copper(II) ion inside the spacer ligand. The effect of the π-π interaction between the porphyrin rings in the closed conformation on the absorption spectra of multi-electron oxidized species and the reduction potentials were clarified by chemical and electrochemical oxidation of the closed form of the zinc bis-porphyrin molecular tweezers in comparison with the open form without copper(II) ion and the corresponding porphyrin monomer. The shifts in redox potentials and absorption spectrum of the porphyrin dication indicate a strong electronic interaction between the two oxidized porphyrins in the closed form, whereas there is little interaction between them in the neutral form. The dynamics of copper(II) ion coordination and subsequent electron transfer was examined by using a stopped-flow UV/Vis spectroscopic technique. It was confirmed that coordination of copper(II) occurs prior to electron-transfer oxidation of the closed form of the zinc bis-porphyrin molecular tweezers.     

Swallowtail porphyrins: synthesis, characterization and incorporation into porphyrin dyads

The incorporation of symmetrically branched tridecyl ("swallowtail") substituents at the meso positions of porphyrins results in highly soluble building blocks. Synthetic routes have been investigated to obtain porphyrin building blocks bearing 1-4 swallowtail groups. Porphyrin dyads have been synthesized in which the zinc or free base (Fb) porphyrins are joined by a 4,4'-diphenylethyne linker and bear swallowtail (or n-pentyl) groups at the nonlinking meso positions. The swallowtail-substituted Zn(2)- and ZnFb-dyads are readily soluble in common organic solvents. Static absorption and fluorescence spectra and electrochemical data show that the presence of the swallowtail groups slightly raises the energy level of the filled a(2u)(pi) HOMO. EPR studies of the pi-cation radicals of the swallowtail porphyrins indicate that the torsional angle between the proton on the alkyl carbon and p-orbital on the meso carbon of the porphyrin is different from that of a porphyrin bearing linear pentyl groups. Regardless, the swallowtail substituents do not significantly affect the photophysical properties of the porphyrins or the electronic interactions between the porphyrins in the dyads. In particular, time-resolved spectroscopic studies indicate that facile excited-state energy transfer occurs in the ZnFb dyad, and EPR studies of the monocation radical of the Zn(2)-dyad show that interporphyrin ground-state hole transfer is rapid.     

meso-Alkyl-substituted meso-meso linked diporphyrins and meso-alkyl-substituted meso-meso, beta-beta, beta-beta triply linked diporphyrins

[reaction: see text] AgPF6-promoted oxidation of 5,10,15-trialkyl zinc(II) porphyrins led to formation of meso-meso linked diporphyrins, which were further oxidized with Sc(OTf)3 and DDQ to give meso-meso, beta-beta, beta-beta triply linked diporphyrins that exhibited a stronger aggregation propensity than corresponding meso-aryl diporphyrins.     

Electrochemical, spectral, and computational studies of metalloporphyrin dimers formed by cation complexation of crown ether cavities

The effect on the electrochemical oxidation and reduction potentials of 5,10,15,20-tetrakis(benzo-15-crown-5)porphyrin (TCP) and its metal derivatives (MTCP; M = Mg(II), VO(IV), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Ag(II)) upon potassium ion induced dimerization of the porphyrins was systematically performed in benzonitrile containing 0.1 M (TBA)ClO(4) by differential pulse voltammetry technique. The HOMO--LUMO energy level diagram constructed from the electrochemical data revealed destabilization of the HOMO level and stabilization of the LUMO level upon dimer formation while such a perturbation was larger for the HOMO level than the LUMO level. The geometry and electronic structure of a representative ZnTCP and its dimer, K(4)(ZnTCP)(2), were evaluated by the ab initio B3LYP method utilizing a mixed basis set of 3-21G(*) for Zn, K, O, and N and STO-3G for C and H. The inter-porphyrin ring distance of the dimer calculated from the optimized geometry agreed with the spectroscopically determined one, and the calculated HOMO and LUMO frontier orbitals revealed delocalization on both of the porphyrins rings. The metal-metal distances calculated from the triplet ESR spectra of the K(+) induced porphyrin dimers bearing paramagnetic metal ions in the cavity followed the trend Cu--Cu < VO--VO < Ag--Ag. However, the spectral shifts resulting from the exciton coupling of the interacting porphyrin pi-systems revealed no specific trend with respect to the metal ion in the porphyrin cavity. Additionally, linear trends in the electrochemically measured HOMO--LUMO gap and the energy corresponding to the most intense visible band of both MTCP and K(4)(MTCP)(2) were observed. A reduced HOMO--LUMO gap predicted for the dimer by B3LYP/(3-21G(), STO-3G) calculations was confirmed by the results of optical absorption and electrochemical studies.     

3-Cyclobutenyl-1,2-dione-substituted porphyrins. 2. A simple and general entry to quinone-porphyrin-porphyrin-quinone tetrads and related molecules

The synthesis of meso-linked quinone-porphyrin-porphyrin-quinone tetrads has been accomplished by the simple treatment of a CH2Cl2 solution of zincated 5-substituted-10,20-diphenylporphyrins (where the substituent = 3-cyclobutenyl-1,2-dione, various quinonyl derivatives, and p-anisyl) with 2,3-dichloro-5,6-dicyanoquinone (DDQ). The zincated porphyrinic quinones were synthesized from 5-(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Zn). The meso-linked dimer of 5-(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Zn) was also shown to be a useful precursor to meso-linked quinone-porphyrin-porphyrin-quinone tetrads. This DDQ-based oxidative dimerization appears to be general and effective for various zincated 5-substituted-10,20-diphenylporphyrins bearing both electron-withdrawing and -donating substituents. The oxidative dimerization was very sensitive to the reaction solvent (dimerization occurred in CH2Cl2, not in THF) and required the zincated porphyrins (the corresponding free base porphyrins did not undergo dimerization). When this solvent effect was applied to the reaction of I2/AgO2CCF3 with zincated porphyrins, either the dimeric porphyrins or iodoporphyrins could be selectively prepared simply by selecting methylene chloride or THF as the reaction solvent, respectively.     

A directly fused tetrameric porphyrin sheet and its anomalous electronic properties that arise from the planar cyclooctatetraene core

Oxidation of a directly meso-meso linked cyclic porphyrin tetramer 2 gave a porphyrin sheet 3. The symmetric square structure of 3 is indicated by its simple 1H NMR spectrum that exhibits only two signals for the porphyrin beta-protons. The absorption spectrum of 3 displays characteristic Soret-like broad bands and weak Q-bands, and its magnetic circular dichroism (MCD) spectrum exhibits a negative Faraday A term at the 762 nm band as a rare case, indicating the absorption as a transition from a nondegenerate level to a degenerate level. A slightly longer S1-state (1.1 ps) and smaller TPA cross section (2750 GM) than a tetrameric linear porphyrin tape also indicate its unique electronic properties. The porphyrin sheet 3 forms stable 1:2 complexes with guest molecules G1 and G2, whose 1H NMR spectra exhibit remarkable downfield shifts for the guest protons that are located just above the cyclooctatetraene (COT) core of 3, whereas the imidazolyl protons bound to the zinc(II) porphyrin local cores are observed at slightly upfield positions. These results have been qualitatively accounted for in terms of the presence of a strong paratropic ring current around the COT core that propagates through the whole pi-electronic network of 3, hence competing with and cancelling the weak diatropic ring currents of the local zinc(II) porphyrins. This explanation was supported by DFT calculation performed at the GIAO-B3LYP/6-31G level, which indicated large positive NICS values within the COT core and small NICS values within the local zinc(II) porphyrins.     

Construction of multiporphyrin arrays via selective cross-metathesis

Selective cross-metathesis of type I and type II meso-functionalized porphyrin olefins afforded alkenyl-coupled dimeric and trimeric porphyrin systems in good yield with excellent E/Z selectivity. The synthetic utility of the method is demonstrated through the preparation of mixed metalated (M = 2H, Zn) porphyrin dimer and trimer. [reaction: see text]     

3-Cyclobutenyl-1,2-dione-substituted porphyrins. A general and efficient entry to porphyrin-quinone and quinone-porphyrin-quinone architectures

A new and efficient synthesis of meso-linked porphyrin-quinone dyads and quinone-porphyrin-quinone triads has been developed via the intermediacy of porphyrins bearing 3-cyclobutenyl-1,2-dione and 3-(1-ethenyl)cyclobutenyl-1,2-dione substituents at one or two nonadjacent meso-positions. The free-base porphyrins 5-bromo-10,20-diphenylporphyrin and 5,15-dibromo-10,20-diphenylporphyrin undergo facile palladium-catalyzed Stille coupling with 3-isopropoxy-2-tri-n-butylstannyl-cyclobutene-1,2-dione to produce the corresponding mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins in good yields. In contrast, the zinc bromoporphyrins reacted with the same tin reagent only slowly and with the formation of side products. The free-base bromoporphyrins also were coupled with tri-n-butylvinyltin to afford vinylporphyrins in very good yields. 5,15-Diphenyl-10-vinylporphyrin was converted into trans-bromovinylporphyrin, which underwent facile Stille coupling with 3-isopropoxy-2-tri-n-butylstannylcyclobutene-1,2-dione to afford the vinylogous 3-cyclobutenyl-1,2-dione-substituted porphyrin. The molecular structure of 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n) was determined by X-ray crystallography. Although the data revealed a fairly large dihedral angle between the cyclobutenedione and the porphyrin rings (57 degrees), the UV-vis spectra of both the mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins showed B- and Q-band red shifts indicative of strong electronic coupling between the porphyrin and cyclobutenedione chromophores in solution. Introduction of a double bond between the cyclobutenedione and porphyrin rings resulted in a significant red shift of both the B- and Q-bands compared to those of the nonvinylogous system. All porphyrinic cyclobutenediones were metalated with zinc and then, using established cyclobutenedione chemistry, converted into a variety of porphyrin-quinones in excellent yields with aryllithium and vinylic Grignard reagents. From the mono(3-cyclobutenyl-1,2-dione)-substituted porphyrin, 7, a variety of directly linked monoquinone-porphyrin dyads were easily synthesized. Substituents could also be introduced at the free meso-position of 7 by bromination followed by palladium-catalyzed cross-coupling reactions, and additional porphyrinic monoquinones were then prepared from these starting materials. The vinylogous squarylporphyrin was converted into a double bond linked porphyrin-quinone via reaction with phenyllithium followed by thermal rearrangement and oxidation. As a result of the hindered rotation around the C-C bond between the porphyrin and the quinone, pairs of stable, separable, and thermally interconvertable atropisomers of porphyrin-quinones were obtained from 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n). The structure of one of the atropisomers was determined by X-ray crystallography.