Thermal properties of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–PbO–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glass system

Thermal behavior of xGa₂O₃–(50 − x)PbO–50P₂O₅ (x = 0, 10, 20, and 30 mol.% Ga₂O₃) and xGa₂O₃–(70 − x)PbO–30P₂O₅ (x = 0, 10, 20, 30, and 40 mol.% Ga₂O₃) glassy materials were studied by thermo-mechanical analysis (TMA) and differential thermal analysis (DTA). Replacement of PbO for Ga₂O₃ is accompanied by increasing glass-transition temperature (263 ≤ T _g/°C ≤ 535), deformation temperature (363 ≤ T _d/°C ≤ 672), crystallization temperature (396 ≤ T _c/°C ≤ 640) and decreasing of coefficient of thermal expansion (5.1 ≤ CTE/ppm K⁻¹ ≤ 16.7). Values of Hruby parameter were determined (0.1 ≤ K _H ≤ 1.3). The thermal stability of prepared glasses increases with increasing of concentration of Ga₂O₃.     

The Role of Alkali Cation Intercalates on the Electrochemical Characteristics of Nb2CTX MXene for Energy Storage

The intercalation of cations into layered-structure electrode materials has long been studied in depth for energy storage applications. In particular, Li⁺-, Na⁺-, and K⁺-based cation transport in energy storage devices such as batteries and electrochemical capacitors is closely related to the capacitance behavior. We have exploited different sizes of cations from aqueous salt electrolytes intercalating into a layered Nb₂CT_x electrode in a supercapacitor for the first time. As a result, we have demonstrated that capacitive performance was dependent on cation intercalation behavior. The interlayer spacing expansion of the electrode material can be observed in Li₂SO₄, Na₂SO₄, and K₂SO₄ electrolytes with d-spacing. Additionally, our results showed that the Nb₂CT_x electrode exhibited higher electrochemical performance in the presence of Li₂SO₄ than in that of Na₂SO₄ and K₂SO₄. This is partly because the smaller-sized Li⁺ transports quickly and intercalates between the layers of Nb₂CT_x easily. Poor ion transport in the Na₂SO₄ electrolyte limited the electrode capacitance and presented the lowest electrochemical performance, although the cation radius follows Li⁺>Na⁺>K⁺. Our experimental studies provide direct evidence for the intercalation mechanism of Li⁺, Na⁺, and K⁺ on the 2D layered Nb₂CT_x electrode, which provides a new path for exploring the relationship between intercalated cations and other MXene electrodes.     

Impact of the alkali cation on the electrocatalytic oxidation of urea and benzyl alcohol on nickel electrode

The effect of electrolyte alkali metal cations (Li⁺, Na⁺, or K⁺) on the electro-oxidation of urea and benzyl alcohol on NiOOH catalyst has been investigated by means of cyclic voltammetry and chronoamperometry in the presence of an electrolyte containing LiOH, NaOH, or KOH. The catalytic activity toward the electro-oxidation of urea and benzyl alcohol was found to increase in the sequence Li⁺ < Na⁺ < K⁺. This activity's difference is partly caused by different surface blockage abilities by OH–M⁺(H₂O)_x (M: Li, Na, K) clusters, which is similar to many electrocatalytic reactions on Pt reported previously, additionally, incorporation of various cations to the catalyst may induce the activities difference as well.     

Phase equilibria of the Dy–Al–Si system at 500 °C

The isothermal section at 500 °C of the Dy–Al–Si system was studied in the whole concentration range. The alloys were characterized by X-ray powder diffraction, scanning electron microscopy and electron micro-probe analysis. A few samples were analysed by differential thermal analysis. The following intermetallic compounds, some of them showing variable composition, were found: DyAl₂Si₂ (τ₁), hP5-CaAl₂O₂ structure type, Dy₂Al₃Si₂ (τ₂) mS14-Y₂Al₃Si₂ structure type, Dy₂Al_1+x Si_2−x (τ₃), 0 ≤ x ≤ 0.25, oI10-W₂CoB₂ structure type and Dy₆Al₃Si (τ₄), tI80-Tb₆Al₃Si structure type. A number of binary phases dissolve the third element forming ternary solid solutions: Dy(Al_1−x Si _x )₃, 0 ≤ x ≤ 0.5, hP16-Ni₃Ti structure type, Dy(Al _x Si_1−x )₂, 0 ≤ x ≤ 0.1, oI12-GdSi₂ structure type, Dy(Al _x Si_1−x )_1.67, 0 ≤ x ≤ 0.2, oI12-GdSi₂ structure type, DyAl _x Si_1−x , 0 ≤ x ≤ 0.2, oC8-CrB, and Dy₅(Al _x Si_1−x )₃, 0 ≤ x ≤0.3, hP16-Mn₅Si₃ structure type. The melting point of Dy₆Al₃Si was determined.     

Co-cation conduction of the (Na1-x K x )3.8M0.1P2O7 (M = Ca, Sr, Cd) solid solutions

Samples of systems (Na _1-x K _x )_3.8M_0.1P₂O₇ (M = Ca, Sr, Cd; 0 ≤x ≤ 1) are synthesized. It is established that solid solutions with the structure of γ-K₄P₂O₇ form in these systems. At room temperature, the solutions exist atx ≥ 0.7. In the calcium-containing system, they form a continuous series at temperatures exceeding ∼500°C. The co-cation character of conduction of the solutions is confirmed by measured transport numbers. The concentration dependences of the electroconductivity and its activation energy point to a polyalkali effect, which decreases with an increase in the M²⁺ ion radius. Partial conductivities of sodium and potassium cations in the (Na _1-x K _x )_3.8Ca_0.1P₂O₇ system are calculated and their dependences on the balance between alkali cations in the solid solution are discussed     

Purification and Partial Characterization of an Exo-polygalacturonase from Paecilomyces variotii Liquid Cultures

An extracellular polygalacturonase (PG) produced from Paecilomyces variotii was purified to homogeneity through two chromatography steps using DEAE-Fractogel and Sephadex G-100. The molecular weight of P. variotii PG was 77,300 Da by gel filtration and SDS-PAGE. PG had isoelectric point of 4.37 and optimum pH 4.0. PG was very stable from pH 3.0 to 6.0. The extent of hydrolysis of different pectins by the purified enzyme was decreased with an increase in the degree of esterification. PG had no activity toward non-pectic polysaccharides. The apparent K _m and V _max values for hydrolyzing sodium polypectate were 1.84 mg/mL and 432 μmol/min/mg, respectively. PG was found to have temperature optimum at 65 °C and was totally stable at 45 °C for 90 min. Half-life at 55 °C was 50.6 min. Almost all the examined metal cations showed partial inhibitory effects under enzymatic activity, except for Na⁺¹, K⁺¹, and Co⁺² (1 mM) and Cu⁺² (1 and 10 mM).     

Electrochemically induced transformations of ruthenium(III) trichloride microcrystals in salt solutions

Ruthenium (III) trichlorid solid crystals have been mechanically attached to gold surfaces and studied by cyclic electrochemical quartz crystal microbalance measurements in the presence of aqueous solutions of different concentrations containing M⁺Cl⁻, where M⁺=H⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺. The RuCl₃ and the complexes formed during the electrochemical transformations show two or more reduction and reoxidation pairs of waves, depending on the experimental conditions (concentration, scan rate, and potential range). The voltammetric peaks are shifted into the direction of higher potentials with increasing electrolyte concentrations except at very high concentrations when the peaks belong to the first reduction/reoxidation processes move oppositely. The mass change was reversible, during reduction mass increase, while during oxidation mass decrease occurred at medium electrolyte concentrations in two, more or less distinct steps. At high or low concentrations the mass excursions are more complex involving different mass increase/decrease regions as a function of potential which vary with the potential range of the measurements. The peak potentials and the electrochemical activity strongly depend on the nature of the cations and pH. It is related to the formation of complexes in different compositions. The mass change decreases with increasing electrolyte concentrations attesting the important role of the water activity and the transport of solvent molecules. It was concluded that in dilute solutions during the first reduction step M⁺ ions enter the surface layer. The strongly hydrated Li⁺ ions transfer water molecules into the microcrystals, while simultaneously with the incorporation of K⁺, Rb⁺, and Cs⁺ ions H₂O molecules leave the surface layer. The opposite transport of ions and solvent molecules occur during oxidation. In the course of further reduction the incorporation of all ions studied except that of Cs⁺ ions is accompanied with water sorption. The number of sorbed water molecules is proportional to the hydration number of these ions. A reaction scheme is proposed in which M⁺ _m-3[Ru^IIICl _m (H₂O) _n ]^3-m · xH₂O (m≥3) and [Ru^IIICl _m (H₂O) _n ]^3-m (Cl⁻)_3-m · xH₂O (m≤3) type complexes are reduced to the respective – or depending on the electrolyte concentration higher or lower – Ru(II)chloro complexes resulting in mixed valence compounds (phases). Taking into account the layered structure of RuCl₃ the electrochemical reduction can be explained as an intercalation reaction in that mixed valence intercalation phases with a general formula M _x ⁺(H₂O) _y [RuCl₃] ^x− are formed from RuCl₃·x H₂O. The reduction/reoxidation waves are related to the redox transformations of Ru(III) to Ru(II) sites, while the composition of the polynuclear complexes and the structure of microcrystals change. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13.−16., 2005.     

Use of Ionic liquids as additives in ion exchange chromatography for the analysis of cations

The behavior of acids (citric acid, nitric acid, oxalic acid, tartaric acid) as a mobile phase and imidazolium ionic liquids (the bromides, tetrafluoroborates and hexafluorophosphates of 1‐ethyl, 1‐butyl, and 1‐hexyl‐3‐methylimidazolium) as additives in ion exchange chromatography for cations (Na⁺, K⁺, Mg²⁺, Ca²⁺) separation were studied. The results showed that nitric acid and 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate offered the most interesting features in the separation of cations, such as lower retention time and better resolution. The selected optimal conditions were achieved by adding 0.10 mM 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate in 4.0 mM HNO₃ mobile phase for the separation of four cations with the flow rate of 0.9 mL/min at room temperature (25°C). The linear regression equations of Na⁺, K⁺, Mg²⁺, Ca²⁺ were S  = 4.4763c  + 0.0209, S  = 3.8903c  – 0.0087, S  = 6.3974c  – 0.0173, and S  = 7.601c  – 0.0339 and the limits of detection of Na⁺, K⁺, Mg²⁺, Ca²⁺ were 0.296, 4.98, 0.0970, and 1.22 μg/L, respectively. In this work, four cations in samples were successfully detected.     

Redistribution of cations and enhancement in magnetic properties of sol–gel synthesized Cu0.7?xCoxZn0.3Fe2O4 (0?≤?x?≤?0.5)

Cu_{0.7− x} Co _x Zn_0.3Fe₂O₄ (0 ≤ x ≤ 0.5) nanoparticles are prepared by sol–gel auto combustion method, using copper nitrate, zinc nitrate, ferric nitrate, cobalt nitrate, and citric acid as the starting materials. The process takes only a few minutes to obtain as-received Co-substituted Cu–Zn ferrite powders. X-ray diffraction (XRD), vibrational sample magnetometer and thermo gravimetric analysis are utilized in order to study the effect of variation in the Co substitution and its impact on particle size, lattice constant, density, cation distribution and magnetic properties like magnetization, coercivity, remanent magnetization, ferritization temperature and associated water content. Lattice parameter found to increase with increasing Co content, whereas X-ray density, bulk density, particle size showed decreasing trend with the Co content. Cation distribution indicates that the Co and Cu ion show preference towards octahedral [B] site, Zn occupy tetrahedral (A) site whereas Fe occupy both tetrahedral (A) and octahedral [B] site. Redistribution of cations takes place for x > 0.3. Saturation magnetization (Ms) increases from 52.99 to 79.62 emu/g (x ≤ 0.3), for x > 0.3 Ms decreases with increase in Co content x. However, coercivity, magnetocrystalline anisotropy and remanent magnetization increases with the Co²⁺ substitution.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

Low-temperature heat capacities and thermodynamic properties of 2,2-dimethyl-1,3-propanediol

The molar heat capacities C _p,m of 2,2-dimethyl-1,3-propanediol were measured in the temperature range from 78 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-solid and a solid-liquid phase transitions were found at T-314.304 and 402.402 K, respectively, from the experimental C _p-T curve. The molar enthalpies and entropies of these transitions were determined to be 14.78 kJ mol⁻¹, 47.01 J K⁻¹ mol⁻ for the solid-solid transition and 7.518 kJ mol⁻¹, 18.68 J K⁻¹ mol⁻¹ for the solid-liquid transition, respectively. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 310 K, C _p,m/(J K⁻¹ mol⁻¹)=117.72+58.8022x+3.0964x ²+6.87363x ³−13.922x ⁴+9.8889x ⁵+16.195x ⁶; x=[(T/K)−195]/115. In the temperature range of 325 to 395 K, C _p,m/(J K⁻¹ mol⁻¹)=290.74+22.767x−0.6247x ²−0.8716x ³−4.0159x ⁴−0.2878x ⁵+1.7244x ⁶; x=[(T/K)−360]/35. The thermodynamic functions H _T−H _298.15 and S _T−S _298.15, were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The thermostability of the compound was further tested by DSC and TG measurements. The results were in agreement with those obtained by adiabatic calorimetry.     

Enthalpy changes of salting processes of hen-egg white lysozyme in various electrolyte solutions

The enthalpy changes of salting process of hen-egg white lysozyme in buffer acetate solutions (pH=4.25) as a function of concentration of following electrolytes: LiCl, KCl, K₂SO₄, Li₂ SO₄ and (NH₄)₂SO₄ are determined. Obtained data according to McMillan and Mayer’s approach, has been analyzed in the terms of the enthalpic pairwise interaction coefficients: lysozyme – lysozyme h_xx, and lysozyme – salt h_xy. The ability of cations to precipitate lysozyme solution in relation to the concentration of cations can be seen from the series as follows: Li⁺> Na⁺>K⁺>NH₄+⁺     

The local structure of gadolinium vanadate–tellurate glasses and glass ceramics: Te2V2O9 crystalline phase

Glasses in the system xGd₂O₃ · (100 − x)[0.7TeO₂ · 0.3V₂O₅] with 0 ≤ x ≤20 mol% have been prepared from melt quenching method. Influence of gadolinium ions on structural behavior in vanadate–tellurate glasses has been investigated using FTIR spectroscopy, X-ray diffraction (XRD), and magnetic susceptibility measurements. The structural changes have been analyzed with increasing rare earth concentration. The structural changes, as recognized by analyzing band shapes of XRD and FTIR spectra, revealed that Gd₂O₃ causes a higher extent of network polymerization as far as 20 mol%. The structure of the heat-treated glasses was found to consist mainly of the Te₂V₂O₉ crystalline phase. These vitreous systems were investigated by magnetic susceptibility measurements. From the paramagnetic susceptibility χ was calculated at different temperature and from the 1/χ(T) graph, the Curie temperature of the glass has been evaluated. Magnetic susceptibility data show the presence of small antiferromagnetic interactions between the Gd⁺³ ions.     

Dissolution of uranium oxides under alkaline oxidizing conditions

Bench scale experiments were conducted to determine the dissolution characteristics of UO₂, U₃O₈, and UO₃ in aqueous peroxide-containing carbonate solutions. The experimental parameters investigated included carbonate countercation (NH₄ ⁺, Na⁺, K⁺, and Rb⁺) and H₂O₂ concentration. The carbonate countercation had a dramatic influence on the dissolution behavior of UO₂ in 1 M carbonate solutions containing 0.1 M H₂O₂, with the most rapid dissolution occurring in (NH₄)₂CO₃ solution. The initial dissolution rate (y) of UO₂ in 1 M (NH₄)₂CO₃ increased linearly with peroxide concentration (x) ranging from 0.05 to 2 M according to: y = 2.41x + 1.14. The trend in initial dissolution rates for the three U oxides under study was UO₃ ≫ U₃O₈ > UO₂.     

Osmotic and Activity Coefficients of the {<Emphasis Type="Italic">x</Emphasis>ZnCl<Subscript>2</Subscript>+(1−<Emphasis Type="Italic">x</Emphasis>)ZnSO<Subscript>4</Subscript>}(aq) System at 298.15 K

Isopiestic vapor pressure measurements were made for {xZnCl₂+(1−x)ZnSO₄}(aq) solutions with ZnCl₂ molality fractions of x=(0,0.3062,0.5730,0.7969, and 1) at the temperature 298.15 K, using KCl(aq) as the reference standard. These measurements cover the water activity range 0.901–0.919≤a _w≤0.978. The experimental osmotic coefficients were used to evaluate the parameters of an extended ion-interaction (Pitzer) model for these mixed electrolyte solutions. A similar analysis was made of the available activity data for ZnCl₂(aq) at 298.15 K, while assuming the presence of equilibrium amounts of ZnCl⁺(aq) ion-pairs, to derive the ion-interaction parameters for the hypothetical pure binary electrolytes (Zn²⁺,2Cl⁻) and (ZnCl⁺,Cl⁻). These parameters are required for the analysis of the mixture results. Although significant concentrations of higher-order zinc chloride complexes may also be present in these solutions, it was possible to represent the osmotic coefficients accurately by explicitly including only the predominant complex ZnCl⁺(aq) and the completely dissociated ions. The ionic activity coefficients and osmotic coefficients were calculated over the investigated molality range using the evaluated extended Pitzer model parameters.     

Synthesis and crystal structure of tris[(dibenzo-18-crown-6-(tetrahydrofuran)potassium) hexakis(isothiocyanato)ferrate(III) 0.3 hydrate

Abstrac  A new complex [K(Db18C6)(THF)]₃⁺[Fe(NCS)₆]³⁻ · 0.31 H₂O (I) was prepared and studied by X-ray diffraction (space group C2/c, a = 21.954, b = 26.496, c = 15.902 ?, β = 102.24°, Z = 4; direct method, leastsquares refinement in the anisotropic approximation to R = 0.098 for 5944 independent reflections; CAD4 automated diffractometer, λMoK _α). The [Fe(NCS)₆]³⁻ anion (on twofold axis) having a slightly distorted octahedral structure is connected by two K-S bonds with two complex cations connected by a twofold axis. Two independent complex cations [K(Db18C6)(THF)]⁺ are of the host-guest type, one being statistically disordered with respect to the twofold axis with site populations of 0.5. The coordination polyhedra of K⁺ are a distorted hexagonal bipyramid and pyramid. Original Russian Text ? A.N. Chekhlov, 2009, published in Koordinatsionnaya Khimiya, 2009, Vol. 35, No. 2, pp. 151–154.     

Experimental investigation of the Nd–Al–Si system

The isothermal section of the Nd–Al–Si ternary system at 500 °C has been investigated using differential thermal analysis, X-ray diffraction analysis, scanning electron microscopy and electron micro-probe analysis. Four ternary intermetallic compounds were confirmed: NdAl₂Si₂ (τ₁), hP5-CaLa₂O₂ structure type, Nd₂Al₃Si (τ₂), hP3-AlB₂ structure type, NdAl_1−x Si_1+x , 0.25 ≤ x ≤ 0.3 (τ₃), tI12-αThSi₂ structure type and Nd₂Al_1−x Si_1+x , 0 ≤ x ≤ 0.2, (τ₅), oS8-CrB structure type. A new ternary intermetallic phase (τ₄) was found: Nd₄Al₃Si₃, orthorhombic oS20, isotypic with Pr₄Al₃Ge₃.     

Stability constants of the Li+, Na+, H3O+, NH4+, Ag+, and K+ complexes of the cone conformer of tetraethyl p-tert-butyltetrathiacalix[4]arene tetraacetate in nitrobenzene saturated with water

Abstract  

From extraction experiments in the two-phase water–nitrobenzene system and γ-activity measurements, the stability constants of the tetraethyl p-tert-butyltetrathiacalix[4]arene tetraacetate (cone)·M⁺ complexes (M⁺ = Li⁺, H₃O⁺, NH₄ ⁺, Ag⁺, or K⁺) were determined in water-saturated nitrobenzene. It was found that these constants increase in the cation order NH₄ ⁺ < K⁺ < H₃O⁺ < Ag⁺ < Li⁺ < Na⁺.     

Monolithic ODS-silica gel column for determination of hydrogen, sodium, ammonium and potassium in acid rain by lon chromatography

Summary A monolithic ODS-silica gel column modified by saturating it with lithium dodecylsulfate (Li-DS) was firstly used to separate monovalent cations simultaneously including H⁺, Na⁺, NH₄ ⁺ and K⁺ by ion-chromatography (IC). Using an acidified 60 mM LiCl solution (pH 3.95, containing 0.10 mM Li-DS) as eluent, these monovalent cations were separated well in the order of Na⁺<NH₄ ⁺<K⁺<H⁺ within 3 min at a flow rate of 2.0 mL min⁻¹. The detection limits of these cations by this method with conductivity detection were 20.0 μM for Na⁺, 12.0 μM for NH₄ ⁺, 9.84 μM for K⁺ and 6.20 μM for H⁺. Acid rain water samples with a pH value less than 5.00 could be analyzed directly with this IC system.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at