Silver nanoparticle formation in microemulsions acting both as template and reducing agent

A novel method of making silver nanoparticles in water-in-oil microemulsions using the surfactants as both the reducing agent and as the structure-directing agent is presented. Since no external strong reducing agent is used the kinetics of the formation is slow, which makes it possible to study the silver nanoparticle formation in situ. The microemulsions used were based on either the nonionic surfactant Brij30 (C12E4), which reduces the silver ion to metallic silver and is thereby partly oxidized, or mixtures of Brij30 and AOT (sodium bis(2-ethylhexyl) sulfosuccinate, where the latter does not reduce the silver ions. The influences of silver ion and nonionic surfactant concentrations on the formation kinetics of the nanoparticles were followed in situ using UV-vis spectroscopy, and both parameters were found to have a big influence. The microemulsion droplet's size, size distribution, and shape were examined by small-angle X-ray scattering (SAXS), and the formed silver nanoparticles were studied using both transmission electron microscopy and SAXS. The SAXS measurements showed that the presence of silver nitrate does not affect the microemulsion systems noticeably and that the droplet's size and shape are retained during the particle formation. It is shown that the size and morphology of the particles do not directly follow the shape and size of the microemulsion droplets even though there is a relation between the droplet size and the radii of the formed particles.     

Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water

In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition.     

Microemulsions as reaction media for the synthesis of Pt nanoparticles

For the synthesis of Pt nanoparticles we used water-in-oil droplet microemulsions as templates. The focus was on the correlation between the size of the microemulsion droplets and that of the resulting Pt particles. To study this correlation in a systematic way, all particles were synthesized at the water emulsification failure boundaries where the microemulsion droplets are spherical and where their size can easily be tuned by the amount of added water. The metallic particles were synthesized by mixing two microemulsions one of which contains the metal salt H(2)PtCl(6) and the other the reducing agent NaBH(4). The size and structure of the microemulsion droplets was studied via small-angle X-ray scattering, while the Pt particles were characterized by high-resolution transmission electron microscopy in combination with energy-dispersive X-ray spectroscopy and selected area electron diffraction. The clear correlation between droplet and particle size was further supported by accompanying Monte Carlo simulations.     

Microstructure and structural transition in microemulsions stabilized by aldonamide-type surfactants

Significant efforts were undertaken to characterize the microstructure and structural properties of water-in-oil (w/o), oil-in-water (o/w), and bicontinuous (bc) microemulsions composed of N-alkyl-N-methylgluconamides (n-alkyl = n-C(12)H(25), n-C(14)H(29), n-C(16)H(33)) and n-alcohols (ethanol, n-propanol, n-butanol) or iso-alcohols (iso-propanol, iso-butanol) as cosurfactants, as well as iso-octane and water. The internal structure of so created four-component system was elucidated by means of an analysis of isotropic area magnitudes in phase diagrams and conductivity measurements. Dynamic light scattering (DLS) measurements provided the microemulsion size and polydispersity. Polarity and viscosity of microemulsion microenvironment were acquired by means of electron paramagnetic resonance (EPR), UV-vis absorption spectroscopy (in the case of w/o droplets), and steady-state fluorescence (SSF) (in the case of o/w droplets). The results show that both the surfactant and the cosurfactant types affect the shape and extent of microemulsions. The size of droplets depends strongly on the type of examined microemulsion and the type of cosurfactant (linear or brunched) but is almost independent of the length of the surfactant alkyl chain. The size of microemulsion droplets ranges from 8.1 to 22.6 nm and from 3.7 to 14.3 nm respectively, for o/w and o/w microemulsions, making them good candidates for both template-based reactions and household components solubilizing media.     

Influence of structural and interfacial properties of microemulsion eluent on chromatographic separation of simvastatin and its impurities

In order to calculate the structural and compositional characteristics of microemulsions, used as eluents in the investigation of HPLC separation of simvastatin and its six impurities, predictive molecular thermodynamic approach is developed. For calculating fundamental interfacial properties of microemulsions, from pure component properties, the lattice fluid self-consistent field theory (SCF), in conjunction with new classical thermodynamic expressions, was applied. Calculation of predicted radii (PR), area per surfactant (ApS) and film thickness (FT), as well as is interfacial tension and bending moment enabled better understanding of separation of such a complex mixture. The microemulsion, which contained 1% (w/w) of diisopropyl ether, 2% (w/w) of sodium dodecyl sulphate (SDS), 6.6% (w/w) of co-surfactant such as n-butanol and 90.4% (w/w) of aqueous 25 mM disodium phosphate pH 7.0 enabled appropriate chromatographic separation between investigated compounds. It has been proved that this microemulsion had the smallest droplet radii and film thickness, which enabled optimal separation. Also the interfacial tension is the smallest, so the free energy change associated with dispersing the drops favoured a large number of small droplets. Hydrophobic interactions between solutes and stationary phase, as well as the microstructural characteristics of microemulsion eluents had a significant influence on chromatographic behavior of simvastatin and its six impurities.     

Organic and bioorganic reactions in microemulsions

During the last two decades reactions in microemulsions have developed into an emerging technology. In most instances oil-continuous microemulsions (w/o systems) have been used and the water droplets have proven useful as “minireactors” for various types of syntheses. This review discusses recent advances in the fields of organic and bioorganic reactions in microemulsions. In preparative organic synthesis microemulsions are of interest to overcome incompatibility problems between nonpolar organic compounds and inorganic salts. For this purpose, microemulsions can be regarded as an alternative to two-phase systems with added phase transfer reagents. Properly formulated microemulsions may also accelerate organic reactions, various mechanisms of such rate enhancements are discussed. Transition from a homogeneous solvent system to a microemulsion may also affect the regioselectivity of organic reactions due to orientation of reactants at the oil-water interface. In bioorganic synthesis, microemulsions are of interest as a reaction medium for several reasons: (i) nonpolar substrates can be dissolved in high concentrations, (ii) thermodynamic equilibria of condensation/hydrolysis reactions can be shifted by adjusting water content, (iii) enzymes are sometimes found to be more stable and more active than in aqueous buffer. Lipases are the most widely used enzymes and reactions have been performed in different types of microemulsion systems. This review presents general aspects of enzymatic catalysis in microemulsions followed by a discussion of recent advances in preparative work focusing on lipase catalyzed processes.     

Highly concentrated emulsified microemulsions as solvent-free plant protection formulations

Effective plant protection agents are readily available and well implemented in industry. However, delivery to the plant and application on the leaf are processes that still need to be optimized. Up to now plant protection formulations represent either emulsion or suspension concentrates that often contain environmentally harmful organic solvents and/or adjuvants. Emulsified microemulsions are hierarchically organized systems comprising emulsion droplets that confine a water-in-oil microemulsion. In the present contribution we show that emulsified microemulsions prepared from environmentally friendly components can be loaded with the plant-protection agent Fenpropimorph® up to 48 wt.% without organic solvent. The emulsion itself is highly concentrated, containing 60 wt.% of dispersed phase, and can be readily diluted with water for spraying in farming applications. Small-angle X-ray measurements reveal the existence of a water-in-Fenpropimorph® microemulsion confined inside the emulsion droplets. Dynamic light scattering shows that the emulsions prepared are monomodal, comprising droplet radii in the hundred nanometer range.     

Fluorinated ionic surfactant microemulsions in hydrofluorocarbon 134a (HFC 134a)

The factors influencing the formation of water-in-134a-propellant microemulsions using the fluorinated ionic surfactants ammonium perfluorooctanoate, ammonium perfluoroheptanoate, and sodium perfluorooctanoate has been determined. None of the fluorinated ionic surfactants could be used to prepare clear, one-phase systems when used as sole surfactant, but they could be when combined with a short-chain fluoro- or hydrocarbon alcohol in surfactant:cosurfactant weight-mixing ratios (K(m)) in the range 1:2 to 2:1. When hydrocarbon alcohols were used this clear region extended over a wide range of compositions and was confirmed by means of photon correlation spectroscopy (PCS) to contain microemulsion droplets in the propellant-rich part of the phase diagram. PCS studies performed in the presence of the water-soluble drug terbutaline sulfate showed that it was possible to solubilize the drug within water-in-propellant microemulsion droplets. These studies confirm for the first time that it is possible to prepare water-in-propellant 134a microemulsions using fluorinated ionic surfactants and to solubilize water-soluble drugs within these systems.     

Self-diffusion and collective diffusion of charged colloids studied by dynamic light scattering

A microemulsion of decane droplets stabilized by a nonionic surfactant film is progressively charged by substitution of a nonionic surfactant molecule by a cationic surfactant. We check that the microemulsion droplets remain identical within the explored range of volume fraction (0.02-0.18) and of the number of charges per droplet (0-40). We probe the dynamics of these microemulsions by dynamic light scattering. Despite the similar structures of the uncharged and charged microemulsions, the dynamics are very different. In the neutral microemulsion, the fluctuations of polarization relax, as is well-known, via the collective diffusion of the droplets. In the charged microemulsions, two modes of relaxation are observed. The fast one is ascribed classically to the collective diffusion of the charged droplets coupled to the diffusion of the counterions. The slow one has, to our knowledge, not been observed previously neither in similar microemulsions nor in charged spherical colloids. We show that the slow mode is also diffusive and suggest that its possible origin is the relaxation of local charge fluctuations via the local exchange of droplets bearing different numbers of charges. The diffusion coefficient associated with this mode is then the self-diffusion coefficient of the droplets.     

Crystallization of Celecoxib in Microemulsion Media

Celecoxib belongs to a new NSAID family specifically inhibiting cyclooxygenase‐2 (COX‐2). The present formulations require high dosage since the transmembrane transport fluctuates and is very difficult to control. We solubilized celecoxib in micelles of nonionic microemulsions and hydrophilic surfactant. The supersaturated solubilized drug was precipitated from the nano‐droplets to form a new solid structure with improved dissolution properties. The selected microemulsion systems loaded with celecoxib were characterized by SAXS, SD‐NMR, viscosity, and electrical conductivity techniques. Precipitation was conducted from W/O as well as from O/W U‐type microemulsions. The crystals obtained by the precipitation were characterized by x‐ray powder scattering, differential scanning calorimetry, FTIR measurements, and microscopic scans.     

Uniform-sized silicone oil microemulsions: preparation, investigation of stability and deposition on hair surface

Emulsions are commonly used in foods, pharmaceuticals and home-personal-care products. For emulsion based products, it is highly desirable to control the droplet size distribution to improve storage stability, appearance and in-use property. We report preparation of uniform-sized silicone oil microemulsions with different droplets diameters (1.4-40.0 μm) using SPG membrane emulsification technique. These microemulsions were then added into model shampoos and conditioners to investigate the effects of size, uniformity, and storage stability on silicone oil deposition on hair surface. We observed much improved storage stability of uniform-sized microemulsions when the droplets diameter was ≤22.7 μm. The uniform-sized microemulsion of 40.0 μm was less stable but still more stable than non-uniform sized microemulsions prepared by conventional homogenizer. The results clearly indicated that uniform-sized droplets enhanced the deposition of silicone oil on hair and deposition increased with decreasing droplet size. Hair switches washed with small uniform-sized droplets had lower values of coefficient of friction compared with those washed with larger uniform and non-uniform droplets. Moreover the addition of alginate thickener in the shampoos and conditioners further enhanced the deposition of silicone oil on hair. The good correlation between silicone oil droplets stability, deposition on hair and resultant friction of hair support that droplet size and uniformity are important factors for controlling the stability and deposition property of emulsion based products such as shampoo and conditioner.     

Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.     

Study of nano-emulsion formation by dilution of microemulsions

The influence of different dilution procedures on the properties of oil-in-water (O/W) nano-emulsions obtained by dilution of oil-in-water (O/W) and water-in-oil (W/O) microemulsions has been studied. The system water/SDS/cosurfactant/dodecane with either hexanol or pentanol as cosurfactant was chosen as model system. The dilution procedures consisted of adding water (or microemulsion) stepwise or at once over a microemulsion (or water). Starting emulsification from O/W microemulsions, nano-emulsions with droplet diameters of 20 nm are obtained, independently on the microemulsion composition and the dilution procedure used. In contrast, starting emulsification from W/O microemulsions, nano-emulsions are only obtained if the emulsification conditions allow reaching the equilibrium in an O/W microemulsion domain during the process. These conditions are achieved by stepwise addition of water over W/O microemulsions with O/S ratios at which a direct microemulsion domain is crossed during emulsification. The nature of the alcohol used as cosurfactant has been found to play a key role on the properties of the nano-emulsions obtained: nano-emulsions in the system using hexanol as cosurfactant are smaller in size, lower in polydispersity, and have a higher stability than those with pentanol.     

Recovery of nanoparticles produced in phosphatidylcholine-based template phases

This paper focuses on the characterization and use of polymer-modified phosphatidylcholine (PC)/sodium dodecyl sulfate (SDS)-based inverse microemulsions as a template phase for BaSO4 nanoparticle formation. The area of the optically clear inverse microemulsion phase in the isooctane/hexanol/water/PC/SDS system is not significantly changed by adding polyelectrolytes, i.e., poly(diallyldimethylammonium chloride) (PDADMAC), or amphoteric copolymers of diallyldimethylammonium chloride and maleamid acid to the SDS-modified inverse microemulsion. Shear experiments show non-Newtonian flow behavior and oscillation experiments show a frequency-dependent viscosity increase (dilatant behavior) of the microemulsions. Small amounts of bulk water were identified by means of differential scanning calorimetry. One can conclude that the macromolecules are incorporated into the individual droplets, and polymer-filled microemulsions are formed. The polymer-filled microemulsions were used as a template phase for the synthesis of BaSO4 nanoparticles. After solvent evaporation the nanoparticles were redispersed in water and isooctane, respectively. The polymers incorporated into the microemulsion are involved in the redispersion process and influence the size and shape of the redispersed BaSO4 particles in a specific way. The crystallization process mainly depends on the type of solvent and the polymer component added. In the presence of the cationic polyelectrolyte PDADMAC the crystallization to larger cubic crystals is inhibited, and layers consisting of polymer-stabilized spherical nanoparticles of BaSO4 (6 nm in size) will be observed.     

Oil-continuous microemulsions mixed with an amphiphilic graft copolymer or with the parent homopolymer Polymer–droplet interactions as revealed by phase behavior and light scattering

Polymer–droplet interactions have been studied in AOT/water/isooctane oil-continuous microemulsions mixed with an amphiphilic graft copolymer, or with the parent homopolymer (AOT = sodium bis(2-ethylhexyl) sulfosuccinate). The graft copolymer has an oil-soluble poly(dodecyl methacrylate) backbone and water-soluble poly(ethylene glycol) side chains. Pseudo-ternary polymer/droplet/isooctane phase diagrams have been established for both the parent homopolymer and the graft copolymer, and the two types of mixture display entirely different phase behavior. The homopolymer–droplet interaction is repulsive, and a segregative phase separation occurs at high droplet concentrations. By contrast, the graft copolymer–droplet interaction is attractive: the polymer is insoluble in the pure oil, but dissolves in the microemulsion. A comparatively high concentration of droplets is required to solubilize even small amounts of polymer. Static and dynamic light scattering has been performed in order to obtain information on structure and dynamics in the two types of mixture. For optically matched microemulsions, with a vanishing excess polarizability of the droplets, the polymer dominates the intensity of scattered light. The absolute intensity of scattered light increases as phase separation is approached owing to large-scale concentration fluctuations. Dynamic light scattering shows two populations of diffusion coefficients; one population originates from “free” microemulsion droplets and the other from the polymer (for homopolymer mixtures) or from polymer–droplet aggregates (for mixtures with the graft copolymer). The graft copolymer forms large polymer–droplet aggregates with a broad size distribution, which coexist with a significant fraction of free droplets.     

Improved solubilization of Celecoxib in U-type nonionic microemulsions and their structural transitions with progressive aqueous dilution

Celecoxib (clxb) is an important drug for treatment of rheumatoid arthritis and osteoarthritis by specifically inhibiting the enzyme cyclooxygenase-2 (COX-2). Clxb is a type 2 drug characterized by low water solubility (<5 mug/ml) and fast transmembrane transport. The present formulations require high dosage since the transmembrane transport fluctuates and is very difficult to control. Dissolving the drug within an oil phase was not practical since its dissolution was very small and its dispersion in water was impossible. In our recent studies, we learned to construct U-type phase diagrams and to formulate reverse microemulsions (oil-based concentrates) that are progressively and fully dilutable with aqueous phase. In the present study, we solubilized clxb in nanostructures of reverse micelles of U-type nonionic microemulsions that consisted of R(+)-limonene, alcohol, propylene glycol (PG), and hydrophilic surfactant (Tween 60). The solubilization capacity of the drug in these systems is many times higher than in either the oil or the aqueous phase. The clxb solubilized microemulsions are fully diluted with aqueous phase without phase separation. The solubilization capacity decreases as the water content increases. Electrical conductivity, viscosity, and self-diffusion (SD) coefficients of the microemulsion components were measured along a suitable water dilution line. The three major microemulsion regions were detected and the transitions between the W/O to bicontinuous phase and from this phase to the O/W droplets were identified (at 30 and 70 wt% aqueous phase, respectively). From the SD coefficients, it was found that the drug is initially solubilized at the interface of the W/O droplets and there are no significant structural changes. The transition to a bicontinuous phase occurs at the same water content as in the empty (i.e., without drug) system. From the viscosity profiles, we concluded that the drug affects the structure of the bicontinuous phase as reflected in the water content at which the oil-continuous network is destroyed and full inversion occurs (50 vs 55 wt% in the drug-loaded system). Upon further dilution the drug remains solubilized at the interface and is oriented with its hydrophilic part facing the water, and is strongly affects the inversion to O/W droplets. From Small Angle X-ray Scattering (SAXS) measurements we learned that the drug effects the structure of microemulsion droplets and forms "ill-defined structures," probably less spherical. Yet, the overall droplet sizes at the high dilutions did not change very much.     

Phase behavior and microstructure of C12E5 nonionic microemulsions with chlorinated oils

New non-ionic microemulsions consisting of pentaethyleneglycol dodecyl ether, water, and 1-chloroalkanes were prepared, and their phase behavior was studied. A homologous series of five different 1-chloroalkanes from 1-chlorooctane to 1-chlorohexadecane was studied. The phase behavior of the microemulsions was determined by vertical sections through the Gibbs' phase prism ("fish" plots), from which valuable information such as the microemulsion balance temperature (T(0)), efficiency of the surfactant (phi*), temperature extension of the three-body phase (DeltaT), mean temperature (T(m)), and the monomeric solubility in oil (phi(mon,oil)) was obtained. The chlorinated alkanes in the microemulsions shift the balance temperature to about 14 degrees C lower compared with their n-alkane counterparts. This indicates the polar nature of the chlorinated oils and their ability to penetrate the surfactant film. The chlorinated alkanes thus behave as short n-alkane molecules and lower the spontaneous curvature of the microemulsion droplets. The efficiency of the surfactant and the monomeric solubility in oil systematically depend on the alkyl chain length of the oil, with the efficiency and solubility decreasing with increasing alkyl chain length of 1-chloroalkane. The size and shape of the microemulsion droplets in the microemulsion phase were studied by small-angle X-ray scattering (SAXS). For a surfactant-to-oil volume fraction ratio of 0.80, the droplets can be described by ellipsoidal shapes, and the size of the droplets increased with increasing alkyl chain length.     

Neutron scattering study of the structural change induced by photopolymerization of AOT/D2O/dodecyl acrylate inverse microemulsions

Small-angle and ultrasmall-angle neutron scattering (SANS/USANS) measurements were used to determine the structural changes induced by photopolymerization of AOT/D2O/(dodecyl acrylate) inverse microemulsion systems. Scattering profiles were collected for the initial microemulsions and the films resulting from photopolymerization of the oil phase. The SANS data for the microemulsions were modeled as spherical, core-shell droplets. Upon polymerization, the clear mircoemulsions formed opaque films. From the SANS/USANS data of the films, it was apparent that this morphology was not preserved upon polymerization; however, it was clearly observed that the formulation of the microemulsion had a large impact on the structure within the films. The Guinier region in the USANS data (2.5 x 10(-5) A(-1) < or = Q < or = 5.3 x 10(-3) A(-1)) from the films indicates that very large structures are formed. Simultaneously, a well-defined peak (0.15 A(-1) < or = Q < or = 0.25 A(-1)) in the SANS data indicates that there are also much smaller structures formed. It is proposed that the low-Q scattering arises from aggregation of the nanometer-size water droplets in the microemulsion to form droplets large enough to scatter visible light, while the peak in the high-Q region results from bilayered structures formed by the surfactant.