Substituent Effects on Binding Constants of Carotenoids to n-Heptane/AOT Reverse Micelles

The absorption spectra of 6′-apo-β-caroten-6′-ol (1), 6′-apo-β-caroten-6′-oic acid (2), and ethyl 6′-apo-β-caroten-6′-oate (3) were analyzed in homogeneous media and in reversed micelles of AOT (sodium 1,4-bis(2-ethylhexyl) sulfosuccinate) in n-heptane. The possible solute–solvent interactions of these compounds were analyzed in pure solvents by Taft and Kamlet's solvatochromic comparison method. These carotenoids show sensitivity similar to that of medium polarity-polarizability as measured by π*. Moreover, the absorption spectra of carotenoid 3 and to much less extent carotenoid 2 display broadening of the visible bands induced by polar solvents characteristic of carotenoids that contain a carbonyl functional group in conjugation with the carbon–carbon π-electron system. They are also sensitive to the ability of the solvent to accept protons in a hydrogen bond interaction measured by β. This sensitivity follows the expected order: 2>1>3. In the reverse micellar system, while the spectra for 3 remain unchanged, the intensity of the absorption band characteristic of n-heptane for 1 and 2 decreases as the AOT concentration increases, and a new band develops. This new band is attributed to the solute bound to the micelle interface. These changes allowed us to determine the binding constant (K_b) between these compounds and AOT. At W₀=[H₂O]/[AOT]=0 the values of K_b of 326±5 and 6.2±0.3 were found for the acid 2 and the alcohol 1, respectively. The strength of binding is interpreted considering their hydrogen-bond donor ability and the solubility in the organic pseudophase. For 1K_bdecreases as W₀ is increased, while for 2 no variation was observed. These effects are discussed in terms of carotenoid–water competition for interfacial binding sites.     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

Highly Dispersed X/SiO(2) and C/X/SiO(2) (X=Alumina, Titania, Alumina/Titania) in the Gas and Liquid Media

Fumed oxides, such as silica, alumina, titania, and mixed X/silicas (X=Al₂O₃ (AS), TiO₂ (TS), CVD-TiO₂, Al₂O₃/TiO₂ (AST)), pristine or covered by carbon deposits formed due to pyrolysis of cyclohexene, were studied using nitrogen adsorption–desorption, photon correlation spectroscopy particle sizing, and electrophoresis. A significant influence of the nature of surface-active sites and structural features of oxides (individual silica, mixed fumed, or prepared using chemical vapor deposition (CVD)) on the pyrolysis of cyclohexene is observed with respect to the pore size distributions due to differences between primary particles in aggregates and on their outer surfaces in the filling of channels by pyrocarbon, resulting also in a decrease in fractal dimension. Structural characteristics and dependences of the particle size distribution and electrokinetic potential of X/SiO₂ and C/X/SiO₂ on the pH of aqueous suspensions suggest that the carbon deposit covers mainly acidic sites at the X/SiO₂ interfaces and X phase patches possessing catalytic activity in pyrolysis, as the negative charge of particles is reduced by pyrocarbon grafting.     

Molecular Interactions in Mixed Monolayers of Octadecanoic Acid and Three Related Amphiphiles

Binary mixed monolayers of octadecanoic acid and three related amphiphilic compounds (octadecanamide, octadecylamine, octadecylurea) have been investigated at the air/water interface by surface pressure–area (Π–Â) isotherms and their resistances to water evaporation (r). In addition, the excess free energies of mixing (ΔG^E) were calculated using the Goodrich method. Both the ln r vs x and ΔG^E vs x plots exhibit marked deviations from linearity, indicating a high degree of miscibility and nonideal behavior of the components in the mixed films. For all of these binary systems the excess free energies of mixing have been found to be minimum for a certain composition corresponding almost to a maximum in evaporation resistances. Weak interactions were detected in octadecanoic acid/octadecanamide monolayers, whereas significant condensation effects were observed in 1 : 1 mixed films containing octadecanoic acid and octadecylamine. This is attributed to an acid–base equilibrium followed by the formation of a well-ordered arrangement of COO⁻ and NH₃⁺ head groups bound to each other by electrostatic forces. The unusual polymorphism of octadecylurea monolayers could be influenced by adding small amounts of octadecanoic acid. The formation of the low-temperature phase (β-phase) is completely suppressed, if the acid content exceeds 8 mol%. The octadecanoic acid seems to induce the formation of the high-temperature phase (α-phase), which is characterized by a vertical orientation of the hydrocarbon chains.     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

Photochromic Inorganic/Organic Self-Assembled Superlattice Films

Phosphotungstic acid (PW₁₂) and 1,10-diaminodecane (1,10-DAD) molecules have been alternatively assembled on 3-aminopropyltriethyoxysilane modified quartz or silicon substrate to form multicomposite mutilayer thin films by the molecular deposition technique. Thus-obtained films were characterized by UV-visible, XRD, X-ray reflection (XRR), and XPS spectra. Results show that the layer-by-layer self-assembly of PW₁₂ and 1,10-DAD leads to a well-ordered superlattice-layered structure with a d-spacing of 3.19 nm, which exhibits extremely exciting photochromic properties. Based on the experimental data, a presumable interlayer structural model has also been suggested.     

Influence of Surface Hydrophobic Groups on the Adsorption of Proteins onto Nonporous Polymeric Particles with Immobilized Metal Ions

Iminodiacetic acid (IDA) and octyl moieties were covalently bound on nonporous particles, which were prepared from dispersion polymerization of methyl methacrylate and glycidyl methacrylate. After being charged with copper ions, the IDA-bound particles could specifically adsorb deoxyribonuclease I (DNase I) through the affinity interaction between protein and immobilized metal ion. A mixed-ligand (metal–chelate and octyl–bound) support was obtained after hydrophobic (octyl) groups were also introduced to the particle surface. The affinity adsorption of DNase I on the copper–IDA chelate was influenced by interaction between the protein and the bound octyl group. Both the affinity and the hydrophobic interactions could be well described by the Langmuir isotherms. The equilibrium adsorption constants were estimated separately to be 0.96 and 0.50 liter g⁻¹ for affinity and hydrophobic bindings, respectively. For binding on mixed-ligand support, the adsorption constant was 0.45 liter g⁻¹. It was evident that both affinity and hydrophobic interactions are involved in the adsorption of proteins onto mixed-ligand particles. Desorption of the inactive proteins from the support was possible by increasing the hydrophobicity of the solution.     

Aggregation and Polymerization of PEG-Based Macromonomers with Methacryloyl Group as the Only Hydrophobic Segment

Aggregation behavior in aqueous solution of a series of poly (ethylene glycol) (PEG)-based macromonomers with methacryloyl group as the only hydrophobic segment has been investigated using surface tension, steady-state and time-resolved fluorescence spectroscopy using pyrene as a probe, and small-angle neutron scattering techniques. The general formula of these macromonomers is CH₂=C(CH₃)–CO–O–E_m–CH₃, where E is the ethylene glycol unit and m=8 (ME₈), 18 (ME₁₈), 49 (ME₄₉), and 120 (ME₁₂₀). The results indicate that a macromonomer with 8 ethylene glycol units forms as an aggregate above a certain critical concentration, which can be defined as critical aggregation concentration. The observed high value of I₁/I₃ in pyrene emission spectra at the interface of these aggregates and the inability to scatter a neutron beam by these aggregates indicate that the hydrophobic cluster formed by this macromonomer is remarkably solvated. ME₁₈ has a tendency to aggregate but others do not form any hydrophobic cluster. The homopolymerization behaviors of these macromonomers in an aqueous medium at 70°C are consistent with these possibi- lities.     

Effects of Nonionic and Mixed Cationic-Nonionic Micelles on the Rate of Alkaline Hydrolysis of 4-Nitrophthalimide

Pseudo-first-order rate constants (k_obs) for alkaline hydrolysis of 4-nitrophthalimide show a monotonic decrease with increase in [C₁₂E₂₃]_T (total concentration of Brij 35) at constant [CH₃CN] and [NaOH]. This micellar effect is explained in terms of a pseudophase micelle model. The rate of hydrolysis becomes too slow to monitor at [C₁₂E₂₃]_T≥0.03 M in the absence of cetyltrimethylammonium bromide (CTABr) and at [C₁₂E₂₃]_T≥0.04 M in the presence of 0.006–0.02 M CTABr at 0.01 M NaOH. The plots of k_obs versus [C₁₂E₂₃]_T show minima at 0.006 and 0.01 M CTABr, while such a minimum is not visible at 0.02 M CTABr.     

The Heavy-Atom Effect on the Photophysics of Aromatic Hydrocarbons in the Presence of Solid Clays

The exchange of the original cation present on a Laponite clay (usually Na⁺) for heavy atoms such as Rb⁺, Cs⁺, and Tl⁺ significantly alters the emission characteristics of some aromatic hydrocarbons (p-terphenyl, naphthalene, pyrene, and biphenyl). The increase of the atomic mass of the cation induces a decrease of the fluorescence emission simultaneous with an increase of the emission in the region of lower energies of the spectra, ascribed to the phosphorescence of those hydrocarbons. Time-resolved experiments for the pyrene–clay system showed a decrease of singlet lifetimes for the heavier atoms. Hydrocarbon aggregates were also detected from both the emission spectra and the time-resolved studies. The “excimer-like” emission showed longer lifetimes (10–25 ns) than the monomolecular hydrocarbons (1–3 ns), as already found for other similar systems. The amount of aggregates increased for the heavier cations due to the smaller surface available on the clay particles. Experiments increasing the amount of Tl⁺ in samples containing a constant concentration of naphthalene allowed evaluation of the distance between the heavy atoms and the probe on the clay surface. The Perrin model treatment was used and resulted in approximately R₀=9.2 Å.     

Removal of proteinaceous soils using hydroxyl radicals generated by the electrolysis of hydrogen peroxide

We have developed here for the first time a novel method to generate hydroxyl radicals, *OH, by applying slightly negative electric potentials (-0.2--0.8 V vs Ag/AgCl) to the surface of a metal (or metal oxide) that is in contact with hydrogen peroxide solution containing a supporting electrolyte. Namely, *OH radicals were generated at the surface by the electrolysis of hydrogen peroxide according to the equation, H2O2+e- --> *OH+OH-. This method was used to clean a stainless steel fouled with a model protein, beta-lactoglobulin. The *OHs generated at the surface were effective in removing beta-lactoglobulin that had been irreversibly adsorbed, by several minutes of treatment at room temperature (22+/-2 degrees C). The removal rates measured for various concentrations of H2O2 and supporting electrolyte and different potentials were determined exclusively by the electric current.     

Nitrogen Adsorption Studies of PAN-Based Activated Carbon Fibers Prepared by Different Activation Methods

Polyacrylonitrile (PAN)-based activated carbon fibers (ACFs) prepared by various activation methods were characterized using low-temperature nitrogen adsorption over a wide relative pressure from 10⁻⁶ to 1. Nitrogen adsorption is a standard tool for determination of porous structure parameters. In the present work, we carried out extensive adsorption studies of a series of PAN-ACFs activated by different methods. It was shown that the high-resolution α_S plot provided valuable information about structural properties of samples under study. The pore size distributions of samples under study were calculated by employing the regularization method according to density functional theory. By these analyses, the pore development and the dominant pores of samples prepared by different methods can be clearly observed. Moreover, the adsorption measurement could provide profound insight into the structural heterogeneity of the ACFs.     

Fluorescence Quenching of Anthracene by N,N-Diethylaniline in the Sodium Dodecyl Sulfate/Benzyl Alcohol/Water System

Photoinduced electron-transfer reaction of anthracene with N,N-diethylaniline (DEA) was studied in the SDS (sodium dodecyl sulfate)/BA (benzyl alcohol)/H₂O system. In an oil/water microemulsion, only the excited anthracene located at the interface can be quenched by DEA. In a water/oil microemulsion, this quenching reaction occurs in the BA continuous phase. Besides being the quencher of the excited anthracene, DEA could also change the system's structure.     

Efficient Photocatalytic Degradation of Environmental Pollutants with Mass-Produced ZnS Nanocrystals

Photocatalytic degradation of water pollutants using nanometersized semiconductor colloids is an emerging area of environmental remediation. The synthesis of semiconductor nanocrystals (NCs), however, can be costly and result in low product yields. For large-scale photocatalytic application in environmental remediation, cost-effective production of the semiconductor NCs would be ideal. Demonstrated in this report is the efficient photocatalytic degradation of p-nitrophenol (pNP) and Acid Orange 7 (AO7) using ZnS nanocrystals (3 to 5 nm diameter) produced in gram quantities with >50% product yield. The pNP half-life in ZnS nanocrystal photocatalyzed reactions was about 1.95 to 2.45 min, whereas in comparable TiO₂ reactions, the pNP half-lives were in the range of 12 to 15 min. Absorption spectra of the photocatalysis reactions suggested the decolorization of pNP without any noticeable formation of phenolic intermediates, implying a mechanism that involves a pNP ring opening via a radical mediated attack. Likewise, the degradation of AO7 was suggested to occur via an oxidative pathway involving hydroxyl radicals formed at the photocatalyst/liquid interface. Optimum conditions for AO7 degradation such as pH, photocatalyst-to-AO7 ratio, and photocatalyst surface passivation were similar to those for pNP. By demonstrating efficient mineralization of these model pollutants using mass-produced ZnS nanocrystals, we hope to lay the foundations necessary for development of large-scale, field-applicable systems.     

Cosurfactant effects on the microemulsion polymerization of styrene

The polymerization of styrene in o/w microemulsions stabilized with dodecyltrimethylammonium bromide (DTAB) with or without cosurfactant (n-butanol, n-hexanol or n-octanol) is examined here. The addition of a cosurfactant enhances the one-phase region in the order: n-butanol > n-hexanol > n-octanol. The kinetics of polymerization slows down in the presence of the alcohol. With the alcohol, the molar masses increase, but no particular trend was noticed on particle size of the lattices. However, by changing the surfactant counter-ion to chloride, alcohol effects on the kinetics almost vanish. Possible explanations to these results are given here. To cite this article: J.E. Puig et al., C. R. Chimie 6 (2003).     

Electrooptics of β-FeOOH Particles in Aqueous Media: 1. Reversing-Pulse Electric Birefringence in the Low Field Region

Reversing-pulse electric birefringence (RPEB) of a nearly monodisperse iron(III) hydroxide oxide sample in the β-form (β-FeOOH) was measured at 25°C and at a wavelength of 633 nm in aqueous media in the presence of NaCl. The concentrations of β-FeOOH and added NaCl varied between 0.00111 and 0.0555 g/L and 0.03 and 2.0 mM, respectively. Except for the suspensions with high salt concentrations, each RPEB signal showed a dip or minimum in the reverse process upon electric field reversal, together with a smooth rise in the buildup and a fall in the decay process. The observed signals were analyzed with a new RPEB theory, which takes into account not only the permanent electric dipole moment (μ) but also the root-mean-square ionic dipole moment (m^21/2) due to the ion fluctuation in ion atmosphere, in addition to the field-induced electronic (covalent) dipole moment Δα′ E. The results showed that the slowly fluctuating moment of m^21/2 is by far the most predominant one for the field orientation of the β-FeOOH particle, though the permanent dipole moment μ may not be completely excluded. The rotational relaxation time of the whole particle was evaluated from the decay signal, while the relaxation time for fluctuating ions was estimated from RPEB signal fitting. The sign of the steady-state birefringence for β-FeOOH suspensions was positive without exception under the present conditions. The birefringence signals in the steady state (δ/d) were proportional to the second power of the applied field strength (E) in the low field region; thus, the Kerr law was verified to hold for β-FeOOH suspensions. The specific Kerr constant was evaluated for each suspension by extrapolating the values of δ/d to zero field (E→0).     

Poly(N-vinyl-2-pyrrolidone) and 1-Octyl-2-pyrrolidinone Modified Ionic Microemulsions

The influence of the nonionic polymer poly(N-vinyl-2-pyrrolidone) (PVP) in comparison to the surfactant 1-octyl-2-pyrrolidinone (OP) on the phase behavior of the system SDS/pentanol/xylene/water was studied. In both modified systems a strong increase in the water solubilization capacity was found, accompanied by a change in the spontaneous curvature toward zero. In the polymer-modified system an isotropic phase channel is formed with increasing polymer content that connects the L1 and the L2 phase. The lamellar liquid crystalline phase is destabilized in both cases. In the L1 phase the adsorption of PVP at the surface of the microemulsion droplets and the formation of a cluster-like structure is proven by several methods like ¹³C NMR T₁ relaxation time measurments, zeta potential measurements, and rheology. In the L2 phase a modification of the interface of the inverse droplets is detected by a shift in the percolation boundary (conductivity) and ¹³C NMR T₁ relaxation measurements. The formation of a cluster-like structure can be assumed on the basis of our rheological measurements.     

Ammonium hydroxide detoxification of spruce acid hydrolysates

When dilute-acid hydrolysates from spruce are fermented to produce ethanol, detoxification is required to make the hydrolysates fermentable at reasonable rates. Treatment with alkali, usually by overliming, is one of the most efficient approaches. Several nutrients, such as ammonium and phosphate, are added to the hydrolysates prior to fermentation. We investigated the use of NH₄OH for simultaneous detoxification and addition of nitrogen source. Treatment with NH₄OH compared favorably with Ca(OH)₂, Mg(OH)₂, Ba(OH)₂, and NaOH to improve fermentability using Saccharomyces cerevisiae. Analysis of monosaccharides, furan aldehydes, phenols, and aliphatic acids was performed after the different treatments. The NH₄OH treatments, performed at pH 10.0, resulted in a substantial decrease in the concentrations of furfural and hydroxymethylfurfural. Under the conditions studied, NH₄OH treatments gave better results than Ca(OH)₂ treatments. The addition of an extra nitrogen source in the form of NH₄Cl at pH 5.5 did not result in any improvement in fermentability that was comparable to NH₄OH treatments at alkaline conditions. The addition of CaCl₂ or NH₄Cl at pH 5.5 after treatment with NH₄OH or Ca(OH)₂ resulted in poorer fermentability, and the negative effects were attributed to salt stress. The results strongly suggest that the highly positive effects of NH₄OH treatments are owing to chemical conversions rather than stimulation of the yeast cells by ammonium ions during the fermentation.     

Assembly of Alternated Multivalent Ion/Polyelectrolyte Layers on Colloidal Particles. Stability of the Multilayers and Encapsulation of Macromolecules into Polyelectrolyte Capsules

Alternating adsorption of multivalent ions and oppositely charged polyelectrolytes on colloid particles has been investigated. Multilayer films composed of Tb³⁺/polysterene sulfonate (PSS) and 4-pyrene sulfate/polyallylamine (PAH) were successfully assembled on polysterene sulfonate (PS) and melamine formaldehyde (MF) latex particles. The amount of assembled material was estimated by fluorescence and the linear growth of the film versus the number of layers was demonstrated. These multilayers are not stable and can be decomposed by salt and temperature. Dissolution of MF particles leads to formation of hollow capsules consisting of multivalent ion/polyelectrolyte multilayers. Comparative analysis of the capsules was done by confocal and scanning force microscopy. Complex hollow spheres consisting of Tb³⁺/PSS or 4-PS/PAH as an inner shell and stable PSS/PAH as an outer shell were produced. Due to selective permeability of the outer shell after degradation of the inner shell the multivalent ions are released out of the capsule while the polyelectrolytes fill the capsule interior. This is indicative of swelling of the capsule by osmotic pressure. The filled capsules were studied by confocal and scanning electron microscopy. Possibilities of encapsulating macromolecules in defined amounts per capsule are discussed.