Double molecular imprinting – a new sensor concept for improving selectivity in the detection of polycyclic aromatic hydrocarbons (PAHs) in water

It is now well recognised that the quality control (QC) of all types of analyses, including environmental analyses depends on the appropriate use of reference materials. One of the ways to check the accuracy of methods is based on the use of Certified Reference Materials (CRMs), whereas other types of (not certified) Reference Materials (RMs) are used for routine quality control (establishment of control charts) and interlaboratory testing (e.g. proficiency testing). The perception of these materials, in particular with respect to their production and use, differs widely according to various perspectives (e.g. RM producers, routine laboratories, researchers). This review discusses some critical aspects of RM use and production for the QC of environmental analyses and describes the new approach followed by the Measurements & Testing Generic Activity (European Commission) to tackle new research and production needs.     

Development of caprine liver quality control materials for trace element analysis of biological tissues

Certified reference materials (CRMs) are used in analytical chemistry for method validation studies in order to establish measurement accuracy, traceability, and long-term stability throughout repeated analyses. Quality control (QC) during routine analysis requires access to stable materials appropriate for the sample matrix being analyzed. However, it may be difficult to find representative, low-cost QC materials, especially for specific analytes in biological tissue matrices. Here, four caprine liver pools are prepared for use as internal QC materials for trace element measurements in biological tissue. Analytes of interest include essential and nonessential trace elements and the lanthanide series elements. The suitability of caprine liver to serve as a secondary reference material (RM), as well as for routine QC purposes, is demonstrated through homogeneity and stability measurements, and the acquisition of precision and uncertainty data. Traceability is established for selected analytes for which available CRMs can provide an unbroken chain of calibrations.     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA     

Characterization (certification) of Bovine Muscle Powder (NIST RM 8414), Whole Egg Powder (NIST RM 8415) and Whole Milk powder (NIST RM 8435) Reference Materials for essential and toxic major, minor and trace element constituents

Summary Bovine Muscle Powder (NIST RM 8414), Whole Egg Powder (NIST RM 8415) and Whole Milk Powder (NIST RM 8435) Reference Materials were characterized for essential and toxic major, minor and trace element composition in an interlaboratory cooperative characterization campaign. Extensive application of widely varied analytical methods yielded best estimate concentration values for 27, 23 and 21 elements, and informational concentration values for 5, 4 and 9 elements, respectively, in RM's 8414, 8415 and 8435. These Reference Materials are intended for analytical quality control of element determinations on meat, egg and milk-based products as well as agricultural/food materials with related matrices.Contribution no. 92–147 from Centre for Land and Biological Resources Research     

Guidance on the contents of accompanying documentation for reference materials (RMs)

The use of reference materials (RMs) is a key activity for the improvement and maintenance of a worldwide coherent measurement system. As detailed in ISO Guide 33, RMs with different characteristics are used in measurement processes, for the purpose of precision control, bias assessment, calibration, assigning values to other materials, and maintaining conventional scales, to name a few. For the establishment of metrological traceability of measurement results to international scales or other measurement standards, proper use of certified reference materials (CRMs) is essential. From the perspective of a reference material producer, the documentation that is provided with an RM is the value-adding component of the material; for the user, the document is critical for the correct implementation and use of the RM in the measurement process. The ISO Committee on Reference Materials (ISO/REMCO) recognised the importance of the documentation that accompanies a reference material as early as 1981 when the first edition of ISO Guide 31 was published. The third edition of the Guide that was published recently considers the appropriate accompanying documentation for all types of reference materials, i.e. CRMs and non-certified RMs.     

Quality management in wastewater treatment plants

A quality management system has been designed for process analyses in wastewater plants. The quality management concept consists of a quality manual, quality control charts used together with certified reference materials, and proficiency testing. Certified reference materials have been used to eliminate basic analytical errors. Proficiency testing has been conducted by VKI, the Reference Laboratory for Environmental Chemistry, subcontracted by the Danish Environmental Protection Agency. In the first proficiency test the analytical quality was comparable in general to the quality of routine environmental laboratories. One of the simplified analytical systems resulted, however, in a low recovery of nitrate in wastewater. The COD results reported in the proficiency test were slightly higher than the theoretical values.     

The preparation of a cabbage reference material for environmental monitoring and food analysis

 Cabbage is frequently used in environmental monitoring and food control, and, hence, cabbage reference materials (RMs) are required for ensuring quality assurance. A cabbage RM was prepared in view of certification of specific elements from the "black list" of high toxicological interest and nutritive importance. All tasks of the RM production (production of the plant material, cutting and freeze-drying, determination of the residual water content, preparation of the RM, homogeneity testing, stability testing, certification measurements) are described in detail. Received: 12 November 1999 / Accepted: 29 January 2000     

Characterization (certification) of three wheat flours and a wheat gluten reference material (NIST RM 8436, 8437, 8438 and 8418) for essential and toxic major, minor and trace element constituents

Summary Three wheat flours, Durum Wheat Flour (NIST RM 8436), Hard Red Spring Wheat Flour (NIST RM 8437), Soft Winter Wheat Flour (NIST RM 8438) and Wheat Gluten (NIST RM 8418) Reference Materials were characterized for essential and toxic major, minor and trace elemental composition by analysts in an interlaboratory cooperative characterization campaign. Extensive application of widely varied analytical methods yielded 16–27 best estimate and 3–8 informational concentration values for each of these materials. These reference materials are intended for analytical quality control of element determinations in flour and flour products as well as other agricultural/food materials with related matrices.Contribution No. 92–145 from Centre for Land and Biological Resources Research     

Characterization (certification) of Corn Bran (NIST RM 8433), Corn Starch (NIST RM 8432) and Microcrystalline Cellulose (NIST RM 8416) Reference Materials for essential and toxic major, minor and trace elemental constituents

Summary Corn Bran (NIST RM 8433), Corn Starch (NIST RM 8432) and Microcrystalline Cellulose (NIST RM 8416) Reference Materials were characterized for essential and toxic major, minor and trace elemental composition in an interlaboratory cooperative characterization campaign. Extensive application of widely varied analytical methods by analysts in cooperating laboratories yielded 10–29 best estimate and 1–16 informational concentration values for each of these materials. Two materials, Corn Starch and Microcrystalline Cellulose, contain particularly low levels of trace elements. These reference materials are intended for analytical quality control of elemental determinations in corn and plant products as well as other agricultural/food materials with related matrices.Contribution No. 92–146 from Centre for Land and Biological Resources Research     

Multielement analysis with ICP-AES-possibilities for quality control with CRMs

Summary An analysis using Certified Reference Materials (CRMs) together with routine samples is by far the best approach for quality control in multielement analysis of environmental samples. The selection of the correct CRM is thus the first important step for all reliable analysis. The chosen material should have a similar matrix, similar concentration of the element(s) of interest and a sufficient number of well-certified elements. For the analysis of samples from the Environmental Specimen Bank only a few CRMs could be successfully used. These were analyzed for a considerable period of time, together with the routine samples for quality control. The results of these analyses were compared with the certified values.     

Analytical validation of quality control materials for Huntington’s disease examination

The expansion of molecular diagnostics using nucleic acid technologies in clinical and public health practice has increased the need for appropriate reference materials and verified quality-control materials for quality assurance, test validation, proficiency testing and the development of new examination procedures. Good laboratory practice requires the use of reference materials to establish an examination procedure and assess the variability of the results. Reference materials are also required to assess the assay on a daily basis and to normalize results collected among different laboratories. Despite the growing volume, the rapidly increasing number of tests being offered, and the necessary routine use, certified reference materials are often not available. There is a wide range of human genetic bio-assays for which there are no available traceable certified reference materials. Several initiatives have been organized to provide well-characterized quality control specimens (e.g., cell lines) with known DNA mutations for use in diagnostics. Mutations are confirmed with bi-directional DNA sequence analysis, which is considered the reference examination procedure. In the field of personalized medicine, NIST has created and validated Standard Reference Material^® 2399 for fragile X examinations. Herein we describe our characterization of candidate reference materials for Huntington’s disease genetic examination. Bi-directional DNA sequencing confirmed the size of the CAG repeat contained on each allele from patient derived materials. Amplification and capillary electrophoresis of the CAG repeats had an uncertainty ranging from 2.06%CV to 7.83%CV.     

Biological Reference Materials for Quality Control of Elemental Composition Analytical Data

Twelve biological-matrix, agricultural/food reference materials, Corn Stalk (Zea Mays) (NIST RM 8412), Corn Kernel (Zea Mays) (NIST RM 8413), Bovine Musele Powder (NIST RM 8414), Whole Egg Powder (NIST RM 8415), Microcrystalline Cellulose (NIST RM 8416), Wheat Gluten (NIST RM 8418), Corn Starch (NIST RM 8432), Corn Bran (NIST RM 8433), Whole Milk Powder (NIST RM 8435), Durum Wheat Flour (NIST RM 8436), Hard Red Spring Wheat Flour (NIST RM 8437) and Soft Winter Wheat Flour (NIST RM 8438) were developed. They were characterized with respect to elemental composition via two extensive international interlaboratory characterization campaigns providing 303 reference and informational concentration values for 34 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cs, Cu, F, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Sb, Se, Sr, Ti, V, W, Zn) of nutritional, toxicological, and environmental significance. These products are available to the analytical community, for quality control of elemental composition analytical data, from the Standard Reference Materials Program, National Institute of Standards and Technology, Gaithersburg, MD, USA.     

Global perspectives for secondary reference materials for analysis of food and related biological samples

Primary, secondary and tertiary reference materials (RM) play an important role in quality controls of analytical measurements. Logistics of preparation and proper use of primary and secondary RMs are presented. Tertiary (i.e. in-house) control materials are useful as substitutes in the absence of recognized primary or secondary RMs. The lack of interdisciplinary interaction during development of RMs (e.g. in specific areas such as foods), has an important impact on limiting the usefulness of certain types of RMs. The abundance of RMs in some countries and regions appears to have little effect on the existing paucity in RMs in other regions, and the underlying causes are outlined. The ability of a laboratory to produce good quality in-house RMs traceable to recognized primary or secondary RMs is a direct measure of its quest for reliable analytical data. Therefore many laboratories should be encouraged to engage in secondary and tertiary RM activities designed to answer specific measurement problems. In this context, assistance (e.g. practical training opportunities) in identifying simple methods of analyses for their efficacy in determining specific analytes is a source of help that can be extended to countries experiencing limitations in laboratory instrumentation.     

Tradition- and science-based quality control of Chinese medicines--introducing the Phyto-True system

The current QC practice of quantifying presumed active chemicals or arbitrarily selected chemical markers is of doubtful value in assessing multicomponent complex traditional Chinese medicines (CMs) and often leads to an inconsistent or irreproducible research and clinical outcome. Consequently, the first and most important step in the QC of CMs (or other botanical medicines) whose exact active chemical components are unknown is to use analytical techniques that can comprehensively define the totality of the components/attributes making up their identity and quality. One of the most versatile techniques is HPTLC. Using HPTLC, along with other simple techniques such as FTIR spectroscopy and UV-Vis spectroscopy combined with complementary gene expression profiling, we have been able to correctly identify CM materials, detect adulterants, and differentiate closely related materials and botanical species. Our research has resulted in the introduction of the concept and specimens of Phyto-True Reference Material (PTRM), aka Representative Botanical Reference/Research Material (RBRM), now commercially available, and a novel patent-pending technology (Phyto-True system) that can serve as a starting point for the meaningful QC of traditional CMs so far not possible for these complex materials. Examples will be highlighted to demonstrate this new concept.     

Accreditation of reference material producers: Let's get it right!

The accreditation of testing and calibration laboratories to ISO/IEC 17025 is increasingly calling for the accreditation of reference material (RM) producers. Two international guides, ISO Guide 34 (2000) " General requirements for the competence of reference material producers" issued by the ISO Committee on Reference Materials and ILAC-G 12 " Guidelines for the requirements for the competence of reference material producers" issued by the International Laboratory Accreditation Cooperation (ILAC), are already in use for this purpose. Recently however initiatives have been launched to accredit RM producers to ISO 17025 as calibration laboratories and it has been suggested that a combination of ISO/IEC 17025 " General requirements for the competence of testing and calibration laboratories" and ISO Guide 34 may be the best option. This publication is an expression of the position of the ISO Committee on Reference Materials (ISO/REMCO) on the standards and guides currently in use in the accreditation of RM producers. The paper discusses the advantages and disadvantages of these standards and guides from the perspective of benefit to RM producers and RM users. In conclusion, the use of ISO Guide 34 alone or in combination with ILAC-G 12 is the preferred system for the accreditation of RM producers. Therefore ISO/REMCO strongly encourages all accreditation bodies to adopt ISO Guide 34.     

A new certified reference material for the quality control of palladium, platinum and rhodium in road dust, BCR-723

Certified Reference Materials (CRMs) represent a key tool for the quality control of chemical analyses. The demand for environmental materials is constantly increasing in complex analytical fields, and the European Commission (EC) (through the Measurements & Testing Generic Activity) is responding to the urgent needs for materials requiring collaborative efforts at the international level. This paper describes the preparation of a new road-dust material (BCR-723), along with homogeneity and stability studies and the analytical work performed for the certification of the contents of palladium, platinum and rhodium, under the EC's PACEPAC project, PACEPAC being the acronym for “Production And CErtification of a road dust reference material for Platinum, palladium and rhodium used in Automotive Catalytic converters”.     

Use of reference materials in coastal monitoring quality assurance

The NOAA National Status and Trends (NS&T) Program determines the current status of, and changes over time in the environmental health of U.S estuarine and coastal waters. Concentrations of organic and inorganic contaminants are determined in bivalves, bottom-dwelling fish and sediments. The quality of the analytical data generated by the NS&T Program is over-seen by the performance-based Quality Assurance Project, which is designed to document sampling protocols, analytical procedures, and laboratory performance, and to reduce intralaboratory and interlaboratory variation. All NS&T cooperating laboratories are required to participate in yearly intercomparison exercises. The analysis of reference materials, such as the National Research Council of Canada's Certified Reference Materials (CRMs) and National Institute of Standards and Technology's (NIST) Standard Reference Materials (SRMs), and of control materials, is required. Because of the need for marine matrix reference materials and standards, NOAA contributed to the production of eight NIST SRMs and seven internal standard solutions. Analytical data from all control materials and all matrix reference materials are reported to the Program office.     

Certified reference material (CRM 414) for the quality control of trace element analysis in plankton

Summary Analyses of plankton are performed by a number of organisations to investigate the transfer and uptake of toxic elements along the trophic chain and to monitor the levels of contamination of different aquatic environments. In order to obtain reliable transfer functions in environmental models or to use plankton as an indicator organism for the assessment of environmental pollution, these analyses should give accurate results. As accuracy requires quality control and the application of certified reference materials (CRMs), a certification campaign has been conducted by the Community Bureau of Reference (BCR). A plankton material was collected in a freshwater pond, lyophilised, homogenised and bottled and its homogeneity and long-term stability were verified. The material (CRM 414) was analysed by a group of 15 selected laboratories having given proof of their adequate QC and using different analytical methods. The contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Se, V and Zn are certified. This paper presents the certification work performed.     

Analytical chemistry of the persistent organic pollutants identified in the Stockholm Convention: A review

Persistent organic pollutants (POPs) are major environmental concern due to their persistence, long-range transportability, bio-accumulation and potentially adverse effects on living organisms. Analytical chemistry plays an essential role in the measurement of POPs and provides important information on their distribution and environmental transformations. Much effort has been devoted during the last two decades to the development of faster, safer, more reliable and more sensitive analytical techniques for these pollutants. Since the Stockholm Convention (SC) on POPs was adopted 12 years ago, analytical methods have been extensively developed. This review article introduces recent analytical techniques and applications for the determination of POPs in environmental and biota samples, and summarizes the extraction, separation and instrumental analyses of the halogenated POPs. Also, this review covers important aspects for the analyses of SC POPs (e.g. lipid determination and quality assurance/quality control (QA/QC)), and finally discusses future trends for improving the POPs analyses and for potential new POPs.     

A new quality control material for marine environmental analysis

The implementation of the European Water Framework Directive (WFD) and of the sediment-quality criteria related to the potential disposal of dredged materials is expected to involve a substantial increase in the number of chemical analyses performed in marine environmental control laboratories. The chemical characterization of sediments (metals, elemental composition, etc.) and the potential release of metals under changing environmental conditions are relevant when dealing with risk assessment. The present paper describes the preparation of a quality control material (QCM) harbor sediment carried out in a specifically equipped laboratory at the University of Barcelona. The results of homogeneity and stability studies for total metal content (Cd, Cr, Cu, Ni, Pb, and Zn), extractable metal following the BCR three-step sequential extraction procedure (BCR-SEP), and total carbon content show the suitability of QCM for multi-parameter routine quality control (QC) in marine environmental laboratories.