Synthesis, characterization and thermoreversible behaviours of poly(dimethyl siloxane)/poly(N-isopropyl acrylamide) semi-interpenetrating networks

Simultaneous and sequential poly(N-isopropyl acrylamide) (PNIPAAm)/poly(dimethyl siloxane) (PDMS) semi-interpenetrating polymer networks (IPNs) with different linear PDMS contents were prepared by free radical polymerization method. Their phase morphologies have been characterized by FTIR, DSC and SEM. The simultaneous semi-IPNs exhibited phase transition temperatures (T_pt) shifted higher temperature from glass transition temperatures (T_g) of their respective homopolymers, suggesting a heterophase morphology and only physical entanglement between the PNIPAAm network and linear PDMS with high molecular weight (Mn≈9000 g/mol). For sequential semi-IPNs, the shift of T_pts towards lower temperature suggested that the chemical interaction between the constituents of the IPNs increased with increasing PDMS content in the network. In addition, these semi-IPNs were characterized for their thermo-sensitive behaviour by equilibrium swelling studies. The results showed that incorporation of hydrophobic PDMS polymer into the thermo- and pH-sensitive PNIPAAm and P(NIPAAm-co-IA) (itaconic acid) hydrogels by semi-IPN formation decreased swelling degrees of IPNs without affecting their LCSTs whereas addition of acrylated PDMS (Tegomer V-Si 2250) as crosslinker instead of N,N^′-methylenebisacrylamide (BIS) into the structures of these hydrogels changed their LCSTs along with their swelling degrees.     

Synthesis,photopolymerization and adhesive properties of new hydrolytically stable phosphonic acids for dental applications

Novel monomers 2‐(N‐methylacrylamido)ethylphosphonic acid, 6‐(N‐methylacrylamido)hexylphosphonic acid, 10‐(N‐methylacrylamido)decylphosphonic acid, and 4‐(N‐methylacrylamidomethyl)benzylphosphonic acid have been prepared in good yields for use in dental adhesives. They have been fully characterized by ¹H‐NMR, ¹³C‐NMR, ³¹P ‐ NMR, and by HRMS. All monomers are hydrolytically stable in aqueous solution. Free radical homopolymerizations of these monomers have been carried out in solution of ethanol/water (2.5/1:v/v), using 2,2′‐azo(2‐methylpropionamidine) dihydrochloride (AMPAHC) as initiator. They lead to homopolymers in moderate to excellent yields. Structure of the polymers has been confirmed by SEC/MALLS and ¹H‐NMR spectra. The photopolymerization behavior of the synthesized monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane has been investigated by DSC. New self‐etch primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on (N‐methylacrylamido)alkylphosphonic acids assure a strong bond between the tooth substance and a dental composite. Moreover, the monomer with the longest spacer group provides the highest shear bond strength. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7074–7090, 2008     

Kinetics and mechanism of the anionic polymerization of acrylamide monomers

The thermodynamics, kinetics, and mechanism of the anionic polymerization of a number of acrylamide monomers has been studied with the use of isothermal and scanning calorimetry, liquid chromatography, ¹H NMR and IR spectroscopy, mass spectrometry, and chemical analysis of functional groups. It has been demonstrated that the polymerization system shows the living character and the interchain exchange reactions are absent. It has been shown that N,N-diethanolacrylamide and N,N-diethanol(meth)acrylamide are uninvolved in anionic polymerization. The causes of this phenomenon have been ascertained. The products of the anionic polymerization of acrylamides are hyperbranched copolymers containing heterochain and carbochain fragments. Macromolecules contain end amide and acrylamide groups; in some macromolecules, end tert-butoxide groups of the used polymerization initiator are detected. For the products of the anionic polymerization of the acrylamide monomers under study, the temperatures of glass transition and melting have been measured.     

Preparation and polymerization of thyroxine methacrylate monomers

Thyroxine methyl ester amides of mono-, di-, and tri-glycyl methacrylates have been prepared. Water-soluble polymers formed from thyroxine methacrylate monomers by free-radical copolymerization with acrylamide had molecular weights of (2–4) × 10⁴ (by viscometry). A fluorescent polymer was prepared by copolymerization with a fluorescein methacrylate monomer. Similarly, a polymeric thyroxine material was prepared with amine functionality by copolymerization with N-3-aminopropylmethacrylamide. These polymers may have interesting biological and immunochemical properties.     

Synthesis,photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application

Four new monomers, 3‐(N‐methylacrylamido)propylidenebisphosphonic acid, 3‐(N‐propyl‐acrylamido)propylidenebisphosphonic acid, 3‐(N‐hexylacrylamido)propylidenebisphosphonic acid, and 3‐(N‐octylacrylamido)propylidenebisphosphonic acid, have been synthesized in good yields and fully characterized by ¹H, ¹³C, ³¹P NMR, and HRMS. The copolymerization of these monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane (DEBAAP) has been investigated with differential scanning calorimetry. These mixtures show a higher reactivity than DEBAAP. New self‐etch dental primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on these bisphosphonic acids assure a strong bond between the tooth substance and a dental composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5258–5271, 2009     

Organometallic polymers. XV. Synthesis and characterization of some ferrocene-containing oxysilane polymers from bis(dimethylamino)silanes

Three bis(dimethylamino)silane monomers have been polymerized with 1,1'-bis-(hydroxymethyl)ferrocene to give ferrocene-containing polyoxysilanes I and II. They were bis(dimethylamino)dimethylsilane (III), bis(dimethylamino)diphenylsilane (IV), and 1,4-bis(N,N-dimethylaminodimethylsilyl)benzene (V). Mixing of the diol and III or IV at O°C followed by heating resulted in polymerization to higher molecular weights than when the monomers were initially mixed at higher temperatures. At higher temperatures the formation of monomeric cyclic products seriously competed with polymerization, and the five atom bridged derivative, 3-sila-2,4-dioxa-3,3diphenyl[5]ferrocenophane (VI) was isolated in good yield. The use of silane V, where cyclization is not expected to compete, led to higher polymer yields and molecular weights. The polymers were low melting and I (R = C₆H₅) could be cast into films and weak fibers were drawn from its melt. The polymers were sensitive to hydrolytic decomposition; those containing Si-CH₃ linkages were completely hydrolyzed in refluxing THF-H₂O (10:1) in 1 hr. The polymers were characterized by viscosity studies, gel-permeation chromatography, and infrared and NMR spectroscopy.     

Studies of silicon-containing maleimide polymers: 1. Synthesis and characteristics of model compounds

A series of the (N-maleimido phenoxy)silane monomers were synthesized by a two-step reaction for using as the application of flame retardant, functional modifier, or a photoresist material in deep-UV region. All of the monomers with maleimide ring were polymerized by radical polymerization in toluene solution using 2,2′-azobisisobutyronitrile (AIBN) as initiator so as to prepare homopolymers. The structures of the maleimide monomers were identified by ¹H, ¹³C, ²⁹Si NMR and element analysis. The chemical structures of polymers were identified by Fourier transform infrared reflection (FT-IR) spectroscopy. The molecular weight distributions of polymers were measured by gel permeation chromatography (GPC) equipment. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to analyze the thermal properties of the polymers. The degree of polymerization in silicon-containing maleimide polymers should be affected by side chains. The introduction of alkylsilane into a side chain of maleimide polymer may reduce the glass transition temperature (T_g) and thermal stability, but increase char yield of solid residue as an excellent flame retardant.     

Structure and packing of aminoxyl and piperidinyl acrylamide monomers

The closely related title compounds, 4‐acrylamido‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, C₁₂H₂₁N₂O₂, (I), and N‐(2,2,6,6‐tetramethylpiperidin‐4‐yl)acrylamide monohydrate, C₁₂H₂₂N₂O·H₂O, (II), are important monomers in the preparation of redox‐active polymers. They comprise an acrylamide group of the usual s‐cis configuration appended to a 2,2,6,6‐tetramethyl‐substituted piperidine‐1‐oxyl radical or a piperidinyl chair, respectively. The adjacent amide and piperidinyl H atoms are approximately trans across the C—N bond. The packing in (I) is dominated by N—H...O hydrogen bonds; these are supported by C—H...O contacts to form an R₂¹(6) ring repeat, a motif which has been observed in other acrylamide structures. In (II), hydrogen bonds are again key to the packing arrangements. In this case, the incorporated solvent water molecule acts as an acceptor through its O atom and as a donor through both H atoms, binding three adjacent piperidinylacrylamide molecules into layers. In both structures, weak C—H...O contacts involving the piperidinyl methyl H atoms and a proximal acrylamide carbonyl O atom extend the structure in the third dimension.     

Synthesis, characterization and photocrosslinking properties of polyacrylamides having bromo substituted pendant cinnamoyl moieties

New 3- and 4-bromocinnamoyl aniline were synthesized condensing 4-aminoacetophenone and the respective bromobenzaldehydes in the presence of sodium hydroxide. The monomers, 4-(3′-bromocinnamoyl) phenyl acrylamide (4,3′-BCPA) and 4-(4′-bromocinnamoyl) phenyl acrylamide (4,4′-BCPA) were prepared by reacting the respective chalcones and acryloyl chloride in the presence of triethylamine at 0-5 °C. Homopolymers of 4,3′-BCPA and 4,4′-BCPA was carried out in methyl ethyl ketone using benzoyl peroxide (BPO) under nitrogen atmosphere at 70 °C. The prepared polymers were characterized by UV, IR, ¹H-NMR and ¹³C-NMR techniques. The molecular weights (M_w and M_n) of the polymers were determined by gel permeation chromatography. The thermogravimetric analysis (TGA) of the polymers in nitrogen atmosphere reveals that they possess very good thermal stability required of a negative type photoresist. The glass transition temperature of poly(4,3′-BCPA) and poly (4,4′-BCPA) were found to be 55 and 64 °C respectively. The solubility of the polymers was tested in various polar and non-polar solvents. Photocrosslinking nature of the polymer samples was carried out in the presence and absence of various triplet photosensitizers in solution phase using chloroform solvent under medium frequency UV light. For using the polymers as negative photoresist materials the rate of photocrosslinking of the polymers was measured under the influence of different solvents, concentrations and position of the substituent.     

A synthetic approach for water soluble hyperbranched poly(N,N-ethylidenebis(N-2-chloroacetyl acrylamide)) with high degree of branching via atom transfer radical polymerization/self-condensing vinyl polymerization

A novel acrylamide A2B2* (A = alkene, B* = alkyl chlorine) type inimer was obtained from commercially available 1,2-ethylenediamine, chloroacetyl chloride and acryloyl chloride. The as-prepared monomer can form water-soluble hyperbranched poly(N,N-ethylidene bis(N-2-chloroacetyl acrylamide))s (HPECA) through atom transfer radical polymerization/self-condensing vinyl polymerization method in the presence alkyl chlorine/CuCl/2,2-bipyridine activation system which can effectively suppress the gelation formation. 1H-NMR spectra and dual detector size exclusion chromatography proved the hyperbranched structure indisputably, and the degree of branching was determined by the detailed analyses of 1H-NMR spectra. The trend of the degree of branching was in consistent with the result of Mark-Houwink exponent a. The experiment results suggested that the conversion was 67%, Mw = 13.2 ? 104, Mark-Houwink a = 0.282 and the degree of branching = 64% when the reaction temperature was 120 oC, reaction time = 168 h and N,N-ethylidene bis(N-2-chloroacetyl acrylamide):Cu(I) = 50:0.62.     

Studies of fluorine-containing bismaleimide resins. Part I: Synthesis and characteristics of model compounds

A series of fluorine-containing bismaleimide (FBMI) monomers are synthesized by a 2-step reaction for using as the applications of low-k materials. The synthesized FBMI monomers are characterized by the ¹H, ¹³C, ¹⁹F nuclear magnetic resonance (NMR) spectroscopy and element analysis. These FBMI monomers react with free radical initiator or self-cure to prepare FBMI-polymers. All the self-curing FBMI resins have the glass transition temperatures T _g in the range of 130–141°C and show the 5% weight loss temperatures T _5% of 280–322°C in nitrogen atmosphere. The higher heat resistance of self-curing FBMI resin relative to FBMI-homopolymer is due to its higher cross-linking density. The FBMI resins exhibit improved dielectric properties as compared with commercial bismaleimide (BMI) resins with the dielectric constants ? lower than 2.44 which is related to the low polarizability of the C-F bond and the large free volume of CF₃ groups in the polymers. Besides, the flame retardancy of all these FBMI resins could be enhanced via the introduction of Br-atom.     

Synthesis and characterization of new soluble and thermally stable aromatic poly(amide-imide)s based on N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide

A new dicarboxylic acid, N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide (1a), bearing three preformed imide rings was synthesized from the condensation of N-(3,5-diaminophenyl)phthalimide and trimellitic anhydride in glacial acetic acid at 1:2 molar ratio. For study of structure-properties relationship 1,3-bis(N-trimellitoyl)benzene (1b, as a reference) was also synthesized in a similar manner. 1a and 1b were characterized by spectroscopic methods and elemental analyses.A series of wholly aromatic poly(amide-imide)s with inherent viscosities of 0.63-1.09 dl g⁻¹ was prepared by triphenyl phosphite-activated polycondensation from the triimide-dicarboxylic acid 1a and the reference monomer 1b with various aromatic diamines. All of the polymers were fully characterized by FT-IR and ¹H NMR spectroscopy. The effects of the phthalimide pendent group on the polymers properties such as solubility, crystallinity, and thermal stability were investigated by comparison of the polymers. The polymers obtained from triimide-dicarboxylic acid 1a exhibited excellent solubility in a variety of solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide, and dimethylsulfoxide. These poly(amide-imide)s possessed glass-transition temperatures from 334 to 403 °C and exhibited excellent thermal stabilities and had 10% weight losses from 541 to 568 °C under a nitrogen atmosphere. Poly(amide-imide)s containing phthalimide pendent groups showed higher solubility, higher T_g and T_d10% values than those having no phthalimide pendent groups.     

New amorphous perfluoro polymers: perfluorodioxolane polymers for use as plastic optical fibers and gas separation membranes

To address the need for perfluoro polymers with higher T_g, we have prepared and characterized various perfluorodioxolane monomers via direct fluorination of the hydrocarbon precursors. These monomers were readily polymerized in bulk or in solution initiated by perfluorodibenzoyl peroxide. The polymers obtained have relatively high T_g(~160°C) and exhibited low material dispersion. These polymers are completely amorphous and soluble in fluorinated solvents. The polymers are also chemically and thermally stable (T_g > 300°C). Thus, these perfluorodioxolane polymers may be used as plastic optical fiber material where high T_g is required, such as in automobile and aircraft application. These perfluorodioxolane polymers were also investigated for use as gas separation membrane. Among these polymers, the copolymer of perfluoro (2‐methylene‐1,3‐dioxolane) and perfluoro (2‐methylene‐4,5‐dimethyl dioxolane) showed superior gas separation performance compared with the commercial perfluoro polymers for a number of gas pair, including CO₂/CH₄, H_e/CH₄, H₂/CH₄, and N₂/CH₄. Copyright © 2015 John Wiley & Sons, Ltd.     

Thermodynamic properties of chitosan-based hydrogels in the range 0–350 K

The heat capacity, the temperature, and the enthalpy of physical transformations of hydrogels based on the copolymer of acrylamide and chitosan with N,N-methylene-bis(acrylamide) as a crosslinking agent, hydrogels based on the mixture of poly(vinylpyrrolidone) and chitosan with glutaric aldehyde as the crosslinking agent, and dehydrated hydrogels has been studied in the range 85–350 K with the use of adiabatic vacuum calorimetry. The temperatures and enthalpies of melting of free water in hydrogels have been determined. From the experimental data obtained, the thermodynamic functions C° _p (T), H° (T) ? H°(0), S° (T) ? S°(0), and G° (T) ? H°(0) have been calculated for the temperature range 0–350 K. The ratio of free and bound water in the hydrogels under study has been determined by calorimetry.     

Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.     

Preparation of new poly(ether-amide-imide)s from 1,4-bis-[4-(trimellitimido)phenoxy]butane and aromatic diamines via direct polyamidation

Several new Poly(ether-amide-imide)s were prepared by direct polycondensation reactions of 1,4-bis-[4-(trimellitimido)phenoxy]butane with various aromatic diamine. Two direct polycondensation techniques were used: direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone/triphenyl phosphite/calcium chloride/pyridine and direct polycondensation in a tosyl chloride/pyridine/N,N-dimethylformamide system. All the monomers and polymers were fully characterized by means of FTIR, ¹H-NMR spectroscopy and elemental analyses and properties of the polymers including solution viscosity, thermal behavior and solubility were studied.     

Synthesis and characterization of hyperbranched aromatic polyester-imides with good thermal properties based on 1,3,5-tris(3′,4′-carboxyphenyl)benzene trianhydride

A new trifunctional monomer, 1,3,5-tris(3′,4′-carboxyphenyl)benzene trianhydride (TAn), was synthesized and characterized by elemental analysis, FTIR, ¹H and ¹³C NMR spectroscopy. Subsequently, one-step high-temperature polymerization of TAn and a series of commercially available diamine monomers such as p-phenylenediamine (PDA, 1), 4,4′-oxydianiline (ODA, 2), and 1,5-diaminonaphthalene (DAN, 3) successfully yielded wholly aromatic anhydride-terminated hyperbranched poly(ester-imide)s HBPEI 1, 2, and 3, respectively. Gelation was effectively avoided by controlling 1:1 M ratio of A₂ and B₃ monomers and maintaining total solid content 10 mmol, thereby, producing a novel family of aromatic HBPEIs with inherent viscosities (η_inh) of 0.17-0.28 dL/g. As-prepared HBPEIs were fully characterized by FTIR spectroscopy and were soluble in DMAc, DMSO and NMP. Degree of branching (DB) by ¹H NMR analysis of the HBPEIs was estimated to be 0.52-0.56. Differential scanning calorimetry (DSC) showed glass transition temperatures (T_g) between 198 and 208 °C and the synthesized polymers were thermally stable. Furthermore, crystallinity of the polymers was evaluated by means of X-ray diffraction patterns.     

Polymerization and copolymerization of an isocyanate blocking agent. N-(1,1′-dimethyl-3-oxobutyl) acrylamide oxime. Mechanical and thermal properties

The bulk polymerization and copolymerization of N-(1,1′-dimethyl-3-oxobutyl) acrylamide oxime have been studied. Polymerization of diacetone acrylamide oxime was carried out with different initiating systems. The rate of polymerization of diacetone acrylamide oxime with azoisobutyronitrile as the initiating system was much higher than with peroxides. However, in the case of perester initiating systems (t-butyl perbenzoate and t-butyl per ethyl-2-hexanoate), cobalt salt promoted the polymerization rate markedly. Diacetone acrylamide oxime readily formed copolymers with a variety of comonomers (crosslinking agents and reactive diluents). Gel permeation chromatography has shown a higher reactivity of diacetone acrylamide oxime with trimethylol propane trimethacrylate as crosslinking agent and N-vinyl-pyrrolidone as reactive diluent. Therefore, the dynamic mechanical analyses presented an increase in T_g with trimethylolpropane trimethacrylate and N-vinyl-pyrrolidone as comonomers. The terpolymer formed with diacetone acrylamide oxime, trinethylolpropane trimethacrylate, and N-vinyl-pyrrolidone exhibited interesting mechanical properties and high temperature behavior.     

The synthesis and characterization of 2,4,6-tris(3,4-dihydroxybenzimino)-1,3,5-triazine and its [salen/salophenFe(III)] and [salen/salophenCr(III)] capped complexes

Four new trinuclear Fe(III) and Cr(III) complexes involving tetradentate Schiff bases N,N′-bis(salicylidene)ethylenediamine-(salenH₂) or bis(salicylidene)-o-phenylenediamine-(salophenH₂) with 2,4,6-tris(3,4-dihydroxybenzimino)-1,3,5-triazine have been synthesized and characterized by means of elemental analysis, ¹H N.M.R., FT-IR spectroscopy, thermal analyses and magnetic susceptibility measurements. The complexes have also been characterized as low-spin distorted octahedral Fe(III) and Cr(III) bridged by catechol group.     

Partially biobased polymers: The synthesis of polysilylethers via dehydrocoupling catalyzed by an anionic iridium complex

Partially biobased polysilylethers (PSEs) are synthesized via dehydrocoupling polymerization catalyzed by an anionic iridium complex. Different types (AB type or AA and BB type) of monomers are suitable. Levulinic acid (LA) and succinic acid (SA) have been ranked within the top 10 chemicals derived from biomass. BB type monomers (diols) derived from LA and SA have been applied to the synthesis of PSEs. The polymerization reactions employ an air-stable anionic iridium complex bearing a functional bipyridonate ligand as catalyst. Moderate to high yields of polymers with number-average molecular weights (M_n) up to 4.38 × 10⁴ were obtained. A possible catalytic cycle via an Ir-H species is presented. Based on the results of kinetic experiments, apparent activation energy of polymerization in the temperature range of 0–10 °C is about 38.6 kJ/mol. The PSEs synthesized from AA and BB type monomers possess good thermal stability (T₅ = 418 °C to 437 °C) and low glass-transition temperature (T_g = −49.6 °C).