Importance of aromatic content for peptide/single-walled carbon nanotube interactions

We have previously demonstrated that a designed amphiphilic peptide helix, denoted nano-1, coats and debundles single-walled carbon nanotubes (SWNTs) and promotes the assembly of these coated SWNTs into novel hierarchical structures via peptide-peptide interactions. The purpose of this study is to better understand how aromatic content impacts interactions between peptides and SWNTs. We have designed a series of peptides, based on the nano-1 sequence, in which the aromatic content is systematically varied. Atomic force microscopy measurements and optical absorption spectroscopy reveal that the ability to disperse individual SWNTs increases with increasing aromatic residues in the peptide. Altogether, the results indicate that pi-stacking interactions play an important role in peptide dispersion of SWNTs.     

Immobilizing shortened single-walled carbon nanotubes (SWNTs) on gold using a surface condensation method

We propose a surface condensation method for assembling single-walled carbon nanotubes (SWNTs) on gold. The as-prepared long and randomly tangled SWNTs were cut into short pipes by chemical oxidation, allowing the nanotubes to be terminated by carboxyl functionalities. A surface condensation reaction was then performed by immersing an amino self-assembled monolayer (SAM)-modified gold substrate into the dimethylformamide suspension of carboxylic nanotubes with the aid of dicyclohexylcarbodiimide condensation agent. Raman spectroscopy and atomic force microscopy (AFM) results show that a highly aligned assembly of SWNTs has been formed on gold, with the nanotubes standing on the surface stable enough for a long ultrasonication. In combination with the microcontact printing (muCP) technique, we have fabricated patterned nanotube assemblies using this surface condensation method. Moreover, we found that the "giant" carbon nanotubes tend to form bundles on an amino-terminating surface, likely following a nucleation-growth model.     

Proton-fueled DNA-duplex-based stimuli-responsive reversible assembly of single-walled carbon nanotubes

Single-walled carbon nanotubes (SWNTs) have received much attention in nanotechnology because of their potential applications in molecular electronics, field-emission devices, biomedical engineering, and biosensors. Carbon nanotubes as gene and drug delivery vectors or as "building blocks" in nano-/microelectronic devices has been successfully explored. However, since SWNTs lack chemical recognition, SWNT-based electronic devices and sensors are strictly related to the development of a bottom-up self-assembly technique. Here we present an example of using DNA duplex-based protons (H(+)) as a fuel to control reversible assembly of SWNTs without generation of waste duplex products that poison DNA-based systems.     

Large-scale fabrication of aligned single-walled carbon nanotube array and hierarchical single-walled carbon nanotube assembly

Aligned single-walled carbon nanotubes (SWNTs) and hierarchical SWNT assembly were fabricated by electrospinning. The high fiber elongation and high DC electric field applied during the electrospinning process result in the orientation of the SWNTs along the axial direction of the fiber. The alignment of the electropsun composite fiber transfers this local SWNT orientation to macroscopically aligned SWNTs. After removing the polymer component from the aligned composite fiber, we produced large area aligned SWNTs. The results show that the directional control of SWNT alignment and debundling of SWNTs into individual tubes can be simultaneously realized.     

Effect of electron-donating and electron-withdrawing groups on peptide/single-walled carbon nanotube interactions

Nano-1, a designed peptide, has been demonstrated to efficiently disperse individual single-walled carbon nanotubes (SWNTs) by folding into an amphiphilic alpha-helix wherein the phenylalanine (Phe) residues on the hydrophobic face of the helix interact via pi-stacking with the aromatic surface of the SWNT. In this study, the ability of electron-donating (hydroxyl) and electron-withdrawing (nitro) groups on the phenyl ring of Phe to affect the interactions between the peptide and SWNTs is examined by substituting the Phe residues in the nano-1 sequence with tyrosine and p-nitro-phenylalanine, respectively. Atomic force microscopy measurements and optical absorption spectroscopy revealed that the ability to disperse individual SWNTs increases with increasing electron density of the aromatic residue on the hydrophobic face of the amphiphilic helical peptides. Scanning tunneling spectroscopy (STS) and Raman analyses were used to examine the effect of noncovalent protein functionalization on the electronic properties of SWNTs. Small shifts in the Raman G band peak for the peptide/SWNT composites, as well as weak features that appear near the Fermi energy (Ef) in the STS dI/dV spectra of the peptide-coated SWNTs, are suggestive of a weak charge-transfer interaction between the peptides and the SWNTs.     

Functionalization of SWNTs to facilitate the coordination of metal ions, compounds and clusters

The carboxylate residues of the open ends of aryl-tert-butyl and arylsulfonic acid side-walled functionalized single walled carbon nanotubes (SWNTs) have been investigated for the complexation conditions of the iron-molybdenum cluster [H(x)PMo(12)O(40)CH(4)Mo(72)Fe(30)(O(2)CMe)(15)O(254)(H(2)O)(98)] ("FeMoC"). A range of alternative donor groups for the attachment of FeMoC have been investigated for piranha etched SWNTs, dodecyl side-walled functionalized SWNTs (DD-SWNTs) and ultra-short SWNTs (US-SWNTs), including include pyridines, thiols and phosphines, using coupling reactions to either the carboxylate or hydroxide residues of the SWNTs' open ends. The functionalized SWNTs have been characterized by XPS, uptake of Fe(3+) and, where appropriate, MAS (31)P NMR. The efficacy of binding is dependent on the presence and identity of the ligand moiety. TEM and AFM of the SWNT-FeMoC conjugates show the presence of a 2-3 nm spherical feature on the tip of individual SWNTs.     

Stable sequestration of single-walled carbon nanotubes in self-assembled aqueous nanopores

We demonstrate the ability to stably sequester individual single-walled carbon nanotubes (SWNTs) within self-contained nanometer-scale aqueous volumes arrayed in an organic continuum. Large areal densities of 4 × 10(9) cm(-2) are readily achieved. SWNTs are incorporated into a surfactant mesophase which forms 2.3 nm diameter water channels by lyotropic self-assembly. Near-infrared fluorescence spectroscopy demonstrates that the SWNTs exist as well-dispersed tubes that are stable over several months and through multiple cycles of heating and cooling. Absence of physical distortion of the mesophase suggests that the SWNTs are stabilized by adsorbed surfactants that do not extend considerably from the surface. Our findings have important implications for templated assembly of carbon nanotubes using soft mesophases and the development of functional nanocomposites.     

Individual dissolution of single-walled carbon nanotubes in aqueous solutions of steroid or sugar compounds and their Raman and near-IR spectral properties

The individual solubilization of single-walled carbon nanotubes (SWNTs), achieved by using ten different anionic-, zwitterionic-, and nonionic-steroid biosurfactants and three different sugar biosurfactants, was examined. Aqueous micelles of anionic cholate analogues, such as sodium cholate (SC), sodium deoxycholate (SDC), sodium taurocholate (STC), sodium taurodeoxycholate (STDC), sodium glycocholate (SGC), as well as N,N-bis(3-D-gluconamidopropyl)cholamide (BIGCHAP) and N,N-bis(3-D-gluconamidopropyl)deoxycholamide (deoxy-BIGCHAP), exhibited good abilities to dissolve the SWNTs individually. Aqueous micelles of nonionic biosurfactants, such as sucrose monocholate (SMC), n-octyl-beta-D-glucoside (OG), n-decyl-beta-D-maltoside (DM), and n-decanoyl-N-methylglucamide (MEGA-10), could dissolve the SWNTs, however, the solubilization abilities were weaker than those of the anionic cholate analogues. In sharp contrast, the solubilization abilities of the zwitterionic micelles of 3-[(3-cholamidopropyl)dimethylammonio]propanesulfonic acid (CHAPS) and 3-[(3-cholamidopropyl)dimethylammonio]-2-hydroxypropanesulfonic acid (CHAPSO) were very low, and almost zero for OG. It is evident that the chemical structures, in particular the substituent groups of the surfactants, play an important role in the solubilization of SWNTs. The near-IR photoluminescence behaviors of the SWNTs dissolved in aqueous micelles and in 1 mM biosurfactants were investigated. The chirality indices of the SWNTs dissolved in these solutions depend on the chemical structures of the biosurfactants. The Raman spectra of the SWNTs dissolved in a 1 mM solution of SC suggest the selective extraction of the metallic SWNTs. Finally, a possible solubilization mechanism using steroid surfactants is described. The SWNTs dissolved individually in water-containing biocompounds are useful in many areas of nano- and materials chemistry.     

A triptycene-based approach to solubilising carbon nanotubes and C60

We describe herein the synthesis of a triptycene-based surfactant designed with the ability to solubilise single-walled carbon nanotubes (SWNTs) and C(60) in water through non-covalent interactions. Furthermore, an amphiphilic naphthalene-based surfactant with the same ability to solubilise SWNTs and C(60) has also been prepared. The compounds synthesised were designed with either two ionic or non-ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Block‐Copolymer‐Assisted Solubilization of Carbon Nanotubes and Exfoliation Monitoring Through Viscosity

Summary: The use of the block copolymers polystyrene‐block‐poly(ethylene oxide) and poly(methyl methacrylate)‐block‐poly(ethylene oxide) is described to assist the direct solubilization of single‐walled carbon nanotubes (SWNTs) into water under ultrasonic irradiation. As compared to surfactants and homopolymers, the block copolymer systems may offer the potential of additional unique morphologies through self‐assembly. TEM and AFM analyses of solution‐cast samples indicate exfoliation and wetting of the SWNTs by the block copolymer. With increasing duration of ultrasonic irradiation, an increase in solution viscosity is initially found, which suggests that it is a convenient indicator of the progress of exfoliation of the SWNTs. With continued intense ultrasonic irradiation, the solution viscosity may decrease apparently because of damage/breakage of the SWNTs.

Schematic of the interaction of the PMMA‐b‐PEO block copolymer with the single‐walled carbon nanotubes and the specific viscosity of the system in aqueous solution as a function of sonication time: results from using an ultrasound bath (‐‐‐‐▪‐‐‐‐) or an ultrasound horn (—▴—).     

Selective dispersion of single-walled carbon nanotubes in the presence of polymers: the role of molecular and colloidal length scales

Dimensionality is known to play a key role in the solution behavior of nano- and mesoparticles. In particular, the shape and the range of the attractive van der Waals interparticle potential are determined by the number of microscopic versus mesoscopic dimensions. For single-walled nanotubes (SWNTs), where two of the dimensions are nanoscopic and one is mesoscopic, the intertube attraction is relatively short ranged, albeit very steep. The very large attraction (compared to the thermal energy, K(b)T) among long SWNTs leads to aggregation at different levels and constitutes a major barrier for manipulation and utilization of SWNTs. This study demonstrates that it is possible to shape the intertube potential by decorating SWNTs with end-tethered polymers. In good solvent conditions for the polymers, entropic repulsion among the tethered chains generates a free energy barrier that prevents SWNTs from approaching the attractive part of the intertube potential. Consequentially, stable dispersions of individual, well separated SWNTs can be prepared. Investigation of different chain lengths and tethering densities of the polymers as well as the interparticle potentials for nanometric versus mesoscopic particles suggests that polymer-induced steric stabilization provides a generic method for separation of SWNTs from mixtures of colloidal species, as demonstrated experimentally.     

Sidewall carboxylic acid functionalization of single-walled carbon nanotubes

The reactions of single-walled carbon nanotubes (SWNTs) with succinic or glutaric acid acyl peroxides in o-dichlorobenzene at 80-90 degrees C resulted in the addition of 2-carboxyethyl or 3-carboxypropyl groups, respectively, to the sidewalls of the SWNT. These acid-functionalized SWNTs were converted to acid chlorides by derivatization with SOCl(2) and then to amides with terminal diamines such as ethylenediamine, 4,4'-methylenebis(cyclohexylamine), and diethyltoluenediamine. The acid-functionalized SWNTs and the amide derivatives were characterized by a set of materials characterization methods including attenuated total reflectance (ATR) FTIR, Raman and solid state (13)C NMR spectroscopy, transmission electron microscopy (TEM), and thermal gravimetry-mass spectrometry (TG-MS). The degree of SWNT sidewall functionalization with the acid-terminated groups was estimated as 1 in 24 carbons on the basis of TG-MS data. In comparison with the pristine SWNTs, the acid-functionalized SWNTs show an improved solubility in polar solvents, for example, alcohols and water, which enables their processing for incorporation into polymer composite structures as well as for a variety of biomedical applications.     

Triply fused Zn(II)-porphyrin oligomers: synthesis, properties, and supramolecular interactions with single-walled carbon nanotubes (SWNTs)

The photophysical, electrochemical, and self-assembly properties of a novel triply fused Zn(II)-porphyrin trimer were investigated and compared to the properties of a triply fused porphyrin dimer and the analogous monomer. The trimer exhibited significantly red-shifted absorption bands relative to the corresponding monomer and dimer. Electrochemical investigations indicated a clear trend in redox properties amongst the three porphyrin structures, with the lowest oxidation potential and the lowest HOMO-LUMO gap exhibited by the triply fused trimer. This electrochemical behavior is attributed to the extensive pi-electron delocalization in the trimeric structure relative to the monomer and dimer. Additionally, it was found that the trimer forms extremely strong and nearly irreversible supramolecular interactions with single-walled carbon nanotubes (SWNTs), resulting in stable solutions of porphyrin-nanotube complexes in THF. Formation of these complexes required the addition of trifluoroacetic acid (TFA) to the solvent. This allowed the oligomers to make close contact with the nanotubes, enabling the formation of stable supramolecular assemblies. Atomic force microscopy (AFM) was used to observe the supramolecular porphyrin-nanotube complexes and revealed that the porphyrin trimer formed a uniform coating on the SWNTs. Height profiles indicated that nanotube bundles could be exfoliated into either individual tubes or very small bundles by exposure to the porphyrin trimer during sonication.     

A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Supramolecular Self‐Assembly of Polymer‐Functionalized Carbon Nanotubes on Surfaces

Summary: Supramolecular self‐assembly of poly(methyl methacrylate)‐grafted multiwalled carbon nanotubes (MWNT‐g‐PMMA) was reported herein. The MWNT‐g‐PMMA (85 wt.‐% PMMA) dispersed in tetrahydrofuran could self‐assemble into suprastructures on surfaces such as gold, mica, silicon, quartz, or carbon films. With decreasing concentration of the MWNT‐g‐PMMA from 3 to 0.1 mg · mL⁻¹, the assembled structures changed from cellular and basketwork‐like forms to multilayer cellular networks and individual needles. SEM, AFM, and TEM measurements confirmed the morphology of the assembled suprastructures, and revealed the assembly mechanism. Phase separation during evaporation of the solvent drives the MWNT‐g‐PMMA nanohybrids to assemble and form the suprastructures, and the rigid MWNTs stabilize the structures.

SEM images of self‐assembled suprastructures of basketwork (a), cellular network (b), and needles (c) from the THF solution of the PMMA‐grafted MWNTs on gold surface.     

Electrochemistry at chemically assembled single-wall carbon nanotube arrays

Single-wall carbon nanotubes (SWNTs) chemically assembled on gold substrates were employed as electrodes to investigate the charge transfer process between SWNTs and the underlying substrates. Cyclic voltammetry (CV) indicates that the assembled SWNTs allow electron communication between a gold electrode and the redox couple in solution, though the SWNTs are linked directly onto the insulating monolayer of 11-amino-n-undecanethiol (AUT) on the Au substrate. An electron transfer (ET) mechanism, which contains an electron tunneling process across the AUT monolayer, is proposed to explain the CV behavior of Au/AUT/SWNT electrodes. Electrochemical measurements show that the apparent electron tunneling resistance, which depends on the surface density of assembled SWNTs, has apparent effects similar to those of solution resistance on CV behavior . The theory of solution resistance is used to describe the apparent tunneling resistance. The experimental results of the dependence of ET parameter psi on the potential scan rate upsilon are in good agreement with the theoretical predictions. Kinetic studies of the chemical assembly of SWNTs by atomic force microscopic (AFM), electrochemical, and Raman spectroscopic methods reveal that two distinct assembly kinetics exist: a relatively fast step that is dominated by the surface reaction, and a successive slow step that is governed by bundle formation.     

Surface initiated ring-opening polymerization of l-proline N-carboxy anhydride from single and multi walled carbon nanotubes

Ring-opening surface initiated polymerization of l-proline N-carboxyanhydride was performed from amine functionalized single (SWNTs) and multi walled carbon nanotubes (MWNTs). The primary amines were grafted on the surfaces via a well-studied Diels–Alder cycloaddition. The initiator attachment helped the debundling of carbon nanotubes as shown by atomic force microscopy (AFM) studies where only small aggregates were observed. Thermogravimetric analysis revealed high wt% of grafted polyproline on the carbon nanotubes surface after the ring-opening polymerization. AFM studies showed a rather uniform layer of grafted polyproline from both MWNTs and SWNTs. The grafting of PLP on the surface was also verified by FTIR and Raman spectroscopy as well as ¹H NMR in CDCl₃/d-TFA. The polyproline grafted carbon nanotubes (CNTs) were readily dissolved in organic solvents in contrast to the insoluble pristine and amine-functionalized CNTs.     

Identification of the structures of superlong oriented single-walled carbon nanotube arrays by electrodeposition of metal and Raman spectroscopy

In this Communication, we have demonstrated a facile and effective approach to identify the structure of the superlong well-aligned single-walled carbon nanotubes (SWNTs) by the combination of electrodeposition of metal (Ag) with Raman spectroscopy. The suitable density and the visibility of the Ag-deposited long oriented nanotubes make it possible to acquire Raman spectra from isolated individual nanotubes very easily. The results reveal that the well-oriented SWNT arrays on SiO2/Si wafer fabricated by EtOH chemical vapor deposition using Fe/Mo nanoparticles as catalyst exhibit a low percentage of metallic SWNTs (5%). Among other SWNTs about 62.3% are semiconducting SWNTs, and a small amount of nanotubes are quasimetallic. About 32% are a so-called quasi-insulator, which is caused inevitably by the defects during growth. Furthermore, the structural uniformity of the long SWNTs can be also evaluated by the deposition of Ag along the length and Raman spectroscopy. This method also provides an approach to deposit other metals on long SWNTs, which could have various potential applications such as for use as sensors, etc. More importantly, this facile method can be applied to long SWNT arrays fabricated from other different catalytic systems so that the relationship between the growth conditions and the structures of SWNTs are expected to be ruled out.     

Rational chemical strategies for carbon nanotube functionalization

Whereas the chemistry of fullerenes is well-established, the chemistry of single-walled carbon nanotubes (SWNTs) is a relatively unexplored field of research. Investigations into the bonding of moieties onto SWNTs are important because they provide fundamental structural insight into how nanoscale interactions occur. Hence, understanding SWNT chemistry becomes critical to rational, predictive manipulation of their properties. Among the strategies discussed include molecular metal complexation with SWNTs to control site-selective chemistry in these systems. In particular, work has been performed with Vaska's and Wilkinson's complexes to create functionalized adducts. Functionalization should offer a relatively simple means of tube solubilization and bundle exfoliation, and also allows for tubes to be utilized as recoverable catalyst supports. Solubilization of oxidized SWNTs has also been achieved through derivatization by using a functionalized organic crown ether. The resultant adduct yielded concentrations of dissolved nanotubes on the order of 1 g L(-1) in water and at elevated concentrations in a range of organic solvents, traditionally poor for SWNT manipulation. To further demonstrate chemical processability of SWNTs, we have subjected them to ozonolysis, followed by treatment with various independent reagents, to rationally generate a higher proportion of oxygenated functional groups on the nanotube surface. This protocol has been found to purify nanotubes. More importantly, the reaction sequence has been found to ozonize the sidewalls of these nanotubes. Finally, SWNTs have also been chemically modified with quantum dots and oxide nanocrystals. A composite heterostructure consisting of nanotubes joined to nanocrystals offers a unique opportunity to obtain desired physical, electronic, and chemical properties by adjusting synthetic conditions to tailor the size and structure of the individual sub-components, with implications for self-assembly.     

Regulation of the near-IR spectral properties of individually dissolved single-walled carbon nanotubes in aqueous solutions of dsDNA

Two different single-walled carbon nanotubes (SWNTs), the so-called HiPco and CoMoCAT, have been individually dissolved in aqueous solutions of double-stranded DNA (dsDNA). Atomic force microscopy (AFM) revealed the fine structures of the dsDNA-wrapped SWNTs. The near-IR absorption and photoluminescence (PL) spectra of aqueous solutions of dsDNA-wrapped SWNTs were recorded and, in pure water, we observed only a single two-dimensional PL spot from (6,5) SWNTs for both HiPco and CoMoCAT. In sharp contrast, when Tris-EDTA (TE) buffer was used in place of pure water, the PL-mapping images of the solutions showed chirality indices of (6,5), (7,5), (7,6), (8,4), (9,4), and (10,2) for HiPco-SWNTs, and (6,5) and (7,5) for CoMoCAT-SWNTs. The first semiconducting bands in the near-IR absorption spectra of solutions of dsDNA-wrapped SWNTs are different. To explain the observed differences in the near-IR absorption and PL behavior we conducted several experiments and found that the near-IR optical properties of the SWNTs can be modulated by changing the pH of the solutions. The pH break-points for near-IR absorption bleaching and PL quenching are different and the phenomena are explained by differences in the numbers of holes generated on the SWNTs. These findings are important from both fundamental and applied viewpoints.