Gas chromatographic characterization of vegetable oil deodorization distillate

Because of its complex nature, the analysis of deodorizer distillate is a challenging problem. Deodorizer distillate obtained from the deodorization process of vegetable oils consists of many components including free fatty acids, tocopherols, sterols, squalene and neutral oil. A gas chromatographic method for the analysis of deodorizer distillate without saponification of the sample is described. After a concise sample preparation including derivatization and silylation, distillate samples were injected on column at 60 degrees C followed by a gradual increase of the oven temperature towards 340 degrees C. The temperature profile of the oven was optimized in order to obtain a baseline separation of the different distillate components including free fatty acids, tocopherols, sterols, squalene and neutral oil. Good recoveries for delta-tocopherol, alpha-tocopherol, stigmasterol and cholesteryl palmitate of 97, 94.4, 95.6 and 92%, respectively were obtained. Repeatability of the described gas chromatographic method was evaluated by analyzing five replicates of a soybean distillate. Tocopherols and sterols had low relative standard deviations ranging between 1.67 and 2.25%. Squalene, mono- and diacylglycerides had higher relative standard deviations ranging between 3.33 and 4.12%. Several industrial deodorizer distillates obtained from chemical and physical refining of corn, canola, sunflower and soybean have been analyzed for their composition.     

Qualitative and quantitative analysis of pyrolysis oil by gas chromatography with flame ionization detection and comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Pyrolysis oils have attracted a lot of interest, as they are liquid energy carriers and general sources of chemicals. In this work, gas chromatography with flame ionization detector (GC-FID) and two-dimensional gas chromatography with time-of-flight mass spectrometry (GC×GC-TOFMS) techniques were used to provide both qualitative and quantitative results of the analysis of three different pyrolysis oils. The chromatographic methods and parameters were optimized and solvent choice and separation restrictions are discussed. Pyrolysis oil samples were diluted in suitable organic solvent and were analyzed by GC×GC-TOFMS. An average of 300 compounds were detected and identified in all three samples using the ChromaToF (Leco) software. The deconvoluted spectra were compared with the NIST software library for correct matching. Group type classification was performed by use of the ChromaToF software. The quantification of 11 selected compounds was performed by means of a multiple-point external calibration curve. Afterwards, the pyrolysis oils were extracted with water, and the aqueous phase was analyzed both by GC-FID and, after proper change of solvent, by GC×GC-TOFMS. As previously, the selected compounds were quantified by both techniques, by means of multiple point external calibration curves. The parameters of the calibration curves were calculated by weighted linear regression analysis. The limit of detection, limit of quantitation and linearity range for each standard compound with each method are presented. The potency of GC×GC-TOFMS for an efficient mapping of the pyrolysis oil is undisputable, and the possibility of using it for quantification as well has been demonstrated. On the other hand, the GC-FID analysis provides reliable results that allow for a rapid screening of the pyrolysis oil. To the best of our knowledge, very few papers have been reported with quantification attempts on pyrolysis oil samples using GC×GC-TOFMS most of which make use of the internal standard method. This work provides the ground for further analysis of pyrolysis oils of diverse sources for a rational design of both their production and utilization process.     

On-line HPLC-HRGC coupling and simultaneous transfer of two different LC fractions: Determination of aliphatic alcohols and sterols in olive oil

A modified loop-type interface is decribed which uses two 6-way valves and concurrent eluent evaporation to perform an on-line transfer and simultaneous gas chromatographic analysis of two different fractions pre-separated by liquid chromatography. The interface is used to simultaneously analyze aliphatic alcohols and sterols present in olive oil. LC pre-separation is carried out using a normal phase column (20 cm × 0.21 cm i.d.) and hexane-isopropanol (99:1) as a mobile phase at a flow of 0.2 ml/min; for the GC analysis a 5 % phenyl, 95 % dimethyl siloxane (25 m × 0.32 mm i.d., 0.4 μm film thickness) column is used.     

Determination of tocopherols and sterols in vegetable oils by solid-phase extraction and subsequent capillary gas chromatographic analysis.

In general, analyses of tocopherols and sterols are performed separately in vegetable oils. By applying solid-phase extraction (SPE) prior to capillary gas chromatography, a simple and reliable procedure for the quantification of both tocopherols and sterols in a single analytical run has been developed. SPE was used as sample clean up procedure for the separation of these minor components from the triacylglycerol matrix, replacing time consuming saponification or on-line LC-GC. The analysis of tocopherols and free sterols in five different vegetable oils illustrates robustness and reliability of this method outlined. Quantification of the analytes was performed by external calibration with reference substances and internal standardization. The recovery of the procedure as well as the repeatability of the quantitative results have been evaluated.     

Analysis of free and esterified sterols in vegetable oil methyl esters by capillary GC

The introduction of quality standards for vegetable oil methyl esters is gaining in importance due to their increased use as diesel fuel substitutes and as technical products. Free and esterified sterols, the main constituents of the unsaponifiable matter in vegetable oils, are recovered in vegetable oil methyl esters and may influence the technical properties of vegetable oil methyl ester products. A rapid gas chromatographic method for the qualitative and quantitative determination of free and esterified sterols in vegetable oil methyl esters has therefore been developed. The concentration of the free sterols as well as their qualitative and quantitative composition and the concentration of the sterol esters have been determined in rape seed oil methyl ester samples by GC–FID. Prior to analysis, the free sterols were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane; betulinol was used as an internal standard. Calibration was performed by analysis of standard solutions containing β-sitosterol, cholesteryl stearate, and betulinol. The reproducibility of the quantitative results has been evaluated by repeated injections of the same test solution and by repeated complete analysis of the same sample.     

Nonsaponifiable lipid components of the pollen of elder (Sambucus nigra L.).

Pollen of the elder (Sambucus nigra L.) was extracted with chloroform-methanol. The extract was separated by column chromatography into the following groups of compounds: hydrocarbons (8.7%). polycyclic aromatic hydrocarbons (0.2%), complex esters (5.2%), triglycerides (18.7%), hydroxy esters (27.9%), free fatty acids and alcohols (16.8%), free sterols (6.8%), and triterpenic alcohols (4.0%). The nonsaponifiable components (hydrocarbons, fatty acids, alcohols, and sterols) were examined in detail using spectroscopic and chromatographic methods (IR spectroscopy, GC, and GC-MS). The identified compounds were characterized by their mass spectra and Kováts retention indices. The double bond positions and their configurations in unsaturated compounds are also reported.     

Essential oil composition of Prasium majus from Croatia

The essential oils from the aerial parts of Prasium majus L., collected during two years in Croatia, were analysed by GC and GC/MS. Fifty-two compounds were identified, representing 90.3-91.8% of the total oils. The major constituents in both samples were fatty acids (particularly hexadecanoic acid and (Z)-octadec-9-enoic acid), lower aliphatic alcohols, aldehydes and acids (major ones oct-1-en-3-ol and (E,E)-hepta-2,4-dienal) and phenylpropane derivatives (e.g. eugenol). Beta-Caryophyllene was the most abundant terpene and (E)-beta-ionone was the major norisoprenoid.     

Gas chromatographic quantitative analysis of methanol in wine: operative conditions, optimization and calibration model choice

The influence of the wine distillation process on methanol content has been determined by quantitative analysis using gas chromatographic flame ionization (GC-FID) detection. A comparative study between direct injection of diluted wine and injection of distilled wine was performed. The distillation process does not affect methanol quantification in wines in proportions higher than 10%. While quantification performed on distilled samples gives more reliable results, a screening method for wine injection after a 1:5 water dilution could be employed. The proposed technique was found to be a compromise between the time consuming distillation process and direct wine injection. In the studied calibration range, the stability of the volatile compounds in the reference solution is concentration-dependent. The stability is higher in the less concentrated reference solution. To shorten the operation time, a stronger temperature ramp and carrier flow rate was employed. With these conditions, helium consumption and column thermal stress were increased. However, detection limits, calibration limits, and analytical method performances are not affected substantially by changing from normal to forced GC conditions. Statistical data evaluation were made using both ordinary (OLS) and bivariate least squares (BLS) calibration models. Further confirmation was obtained that limit of detection (LOD) values, calculated according to the 3sigma approach, are lower than the respective Hubaux-Vos (H-V) calculation method. H-V LOD depends upon background noise, calibration parameters and the number of reference standard solutions employed in producing the calibration curve. These remarks are confirmed by both calibration models used.     

Improved method for extraction of aroma compounds in aged brandies and aqueous alcoholic wood extracts using ultrasound

This work presents a rapid method for dichloromethane extraction of aroma compounds from brandies and aqueous-alcoholic wood extracts, in brandy-like ageing conditions, using ultrasound. The dichloromethane extracts were injected in split mode on a gas chromatographic (GC) system, separated on a DB-WAX capillary column and detected by flame ionisation. The method allowed satisfactory quantification of 37 volatile compounds in brandies (alcohols, esters, acids, furanics, aldehydes and phenols) and 16 volatile compounds in aqueous-alcoholic oak extracts. Linear responses were obtained (0.99-1.00). The repeatability and the detection and quantification limits were also evaluated. The analysis of spiked samples showed that matrix effects do not affect the method performance for the majority of the volatile compounds analysed.     

Quantification of BTEX in Soil by Headspace SPME–GC–MS Using Combined Standard Addition and Internal Standard Calibration

There is a great demand for simple, fast and accurate methods for quantification of volatile organic contaminants in soil samples. Solid-phase microextraction (SPME) has a huge potential for this purpose, but its application is limited by insufficient accuracy caused by a matrix effect. The aim of this research was to develop the method for BTEX quantification in soil using combined standard addition (SA) and internal standard (IS) calibration. Deuterated benzene (benzene-d6) was used as the internal standard for all analytes. The optimized method includes spiking replicate samples with different concentrations of BTEX standards and the same concentration of benzene-d6, equilibration of soil samples at 40 °C during 2 h, and SPME–GC–MS analysis. Precision and accuracy of IS and SA methods were compared on different soil matrices. Combined SA + IS method provided more precise calibration plots compared to the conventional SA calibration. The SA + IS calibration provided more precise and accurate results compared with a reference method based on solvent extraction followed by GC–MS when applied to BTEX quantification in real soil samples (spiked with diesel fuel and aged). Recoveries of BTEX from soil samples spiked with known concentrations of analytes using the developed method were in the range of 73–130% with RSD values less than 15% for all BTEX. The proposed simultaneous standard addition and internal standard approach can be advantageous and adopted for improved quantification of other toxic VOCs in soil.     

Determination of Oxygenates in Gasoline by GC×GC

Comprehensive two‐dimensional gas chromatography (GC×GC) has been applied to the quantitation of oxygenates in reformulated gasoline. Target oxygenates were C₁–C₄ alcohols, tert‐pentanol, methyl tert‐butyl ether (MTBE), diisopropyl ether (DIPE), ethyl tert‐butyl ether (ETBE), and tert‐amyl methyl ether (TAME). These were separated from the gasoline matrix using a volatility‐based selectivity in the first chromatographic dimension, followed by a mixed‐phase polarity/shape selectivity in the second dimension. The high resolving power of this stationary phase combination completely separated all oxygenates except DIPE, ETBE, and TAME, which exhibited coelution with other nonpolar gasoline components. Oxygenates quantitation was achieved with the use of an internal standard, an FID detector, and calibration curves. Quantitation results are in good agreement with ASTM and EPA standard methods. When coupled with our previous method for BTEX and aromatics, a single GC×GC method can now quantitate MTBE, alcohols, BTEX, and aromatics in a one‐hour analysis.     

GC-MS分析南方红豆杉种子中的挥发油

采用水蒸气蒸馏法提取南方红豆杉种子中的挥发油，测得南方红豆杉种子挥发油的收率为2．5％。通过GC-MS技术分析了南方红豆杉种子中挥发油的化学成分。按照GC／MS通用法则，初步确定了24种化合物的结构。并用峰面积归一化法得出在挥发油中的各化学成分。其中主要成分酸类占挥发油总量的81．28％．其次的烷烃类化合物为12．74％，醛类化合物为1．80％，不饱和烷烃类化合物1．44％，醇类化合物占0、89％，酯类化合物为0．52％，胺类化合物为0．34％。这几类物质占种子中挥发油总量的99．01％。     

Method validation for the determination of propellant components by Soxhlet extraction and gas chromatography/mass spectrometry

A fast, sensitive, and accurate GC/MS method for the quantification of aliphatic nitroesters (ethylene glycol dinitrate, nitroglycerin, and triethylene glycol dinitrate) and aromatic amines (diphenylamine, 2-nitrodiphenylamine, and triphenylamine) in propellants was developed and validated. This method comprises a Soxhlet extraction step with dichloromethane, followed by separation on a capillary column MDN-5. Ionization of the analytes is carried out using electron ionization. The limit of quantification of the method was 1% w/w for aliphatic nitroesters and 0.1% w/w for aromatic amines (diphenylamine and triphenylamine). Values of repeatability and reproducibility for analyzed compounds were smaller than values of the maximum allowed tolerances of the Horwitz-equation RSD(max) and 2/3 RSD(max). Values of accuracy for selected compounds were below the acceptable threshold of 15% for all tested levels in the range of calibration curve excepting the lowest concentration of calibration curve for nitroglycerin and aromatic amines. During the validation of method, temperature instability in injection port of gas chromatograph and column was observed for 2-nitrodiphenylamine. Hence, it follows worse results of accuracy and linearity and 2-nitrodiphenylamine was not validated successfully.     

Compositional analysis of UV-cured acrylic ester resins by pyrolysis–gas chromatography in the presence of organic alkali

Compositional analysis of UV-cured resins consisting of multi-component acrylic esters was studied by pyrolysis–gas chromatography (Py–GC) in the presence of organic alkali, tetramethylammonium hydroxide (TMAH). The pyrograms of the UV-cured resins formed from ethylene oxide modified bisphenol A diacrylate (EBADA) contained specific products such as methyl acrylate (MA) and various dimethyl ethers of ethylene oxide modified bisphenol A reflecting the numbers of ethylene oxide units in the original EBADA. Meanwhile the pyrograms of the UV-cured resins comprised of acrylated polyfunctional aliphatic alcohols such as pentaerythritol triacrylate (PETA) and dipentaerythritol hexacrylate (DPEHA) contained methyl ethers reflecting the structure of the original alcohols. In addition, considerable amounts of pyrolyzates with non-methylated hydroxyl groups were also detected for aliphatic alcohol moieties. The compositions of the UV-cured resins containing multi-component acrylic esters were also analyzed based on the relative yields of the characteristic pyrolyzates of each acrylic ester. For calibration purpose, a series of UV-cured standard samples, which contained known amounts of the individual acrylic ester and neopentylglycol diacrylate (NPGDA) used as an internal standard, were measured. The compositions of the multi-component UV-cured resins determined using this approach showed good agreement with the theoretical values estimated from the feed composition.     

Gas chromatographic determination of high molecular weight alcohols from policosanol in omega-3 fish oil by acylation with acetyl chloride

A new validated gas chromatographic (GC) method using acetyl chloride as a derivatizing agent for determining policosanol's high molecular weight alcohols (policosanol's fatty alcohols; PFAs) in fish oil (FO) is described. Before derivatizing the alcohols, FO was subjected to a methylation reaction, and then the PFAs were isolated in a chloroform fraction by silica gel by column liquid chromatography. GC analysis was performed using a BPX-5 wide-bore column and 1-eicosanol as an internal standard. Validation assays applied to the method proved noninterference by a very complex mixture of the FO with PFAs, even for samples subjected to stress conditions. Good linearity [correlation coefficient >0.999, relative standard deviation (RSD) of the slope <1.3%, and RSD of the response factors <1.9% with no bias] and accuracy (average recovery from 100.6 to 102.2%) over a range of 28-142% of the nominal concentration were obtained. Within-day and intermediate precisions at the nominal dose (100%) were 1.7 and 2.9%, respectively. The method was successfully used to identify and quantitate the PFAs in FO.     

Effects of injection volume change on gas chromatographic sensitivity determined with two contrasting calibration approaches for volatile organic compounds

In this study, the effects of injection volume change on gas chromatographic detection properties have been evaluated using gas-phase standards containing three aromatic volatile organic compounds (VOC): benzene, toluene, and xylene (commonly called BTX). To examine such effects on GC sensitivity, a series of calibration data sets were obtained using standards of three concentration values (3, 6, and 10 ppm) at each of five selected injection volumes (20 to 1000 microL). The results were initially examined in terms of the fixed standard volume (FSV) approach to allow the direct comparison of calibration patterns between different injection volumes. Identical data sets were then re-organized so that the calibration data could also be compared across variable injection volumes for a given standard concentration (at all three concentrations), i.e. by the fixed standard concentration (FSC) approach. The results of our comparative analysis between the FSV and the FSC approaches indicate that the calibration patterns of VOC are highly sensitive to changes in injection volume or injection-related conditions. It is thus suggested that the former approach is more reasonable for reducing uncertainties associated with the GC-based quantification of atmospheric pollutants.     

Lipids from Flowers and Leaves of <Emphasis Type="Italic">Artemisia annua</Emphasis> and Their Biological Activity

Chemical, chromatographic, and spectral methods were used to show that the main components of the lipid extract of flowers and leaves are free and bound aliphatic and cyclic alcohols (sterols and triterpenols) and essential oil. It was shown that the lipid extract of Artemisia annua has a positive influence on skin metabolism and possesses anti-inflammatory activity.__________Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 226–229, May–June, 2005.     

Method development for fingerprinting of biodiesel blends by solid-phase extraction and gas chromatography-mass spectrometry

A method based on the combination of solid-phase extraction (SPE) with gas chromatography-mass spectrometry (GC/MS) for detailed chemical fingerprinting of biodiesel/petrodiesel blends was developed in the present study. Forensic identification, commonly referred to as chemical fingerprinting, is based on the relative distributions of individual aliphatic hydrocarbons, aromatic hydrocarbons, fatty acid alkyl esters, and free sterols. Fractionation of fuel samples is optimized for the separation of fatty acid esters and free sterols from petroleum hydrocarbons into four fractions: aliphatic, aromatic, fatty acid ester, and polar components. The final recoveries of aliphatic and aromatic hydrocarbons were determined to be in the range of 65-103%, 73-105% for FAMEs, and 78-103% for free sterols in the polar fraction. Excellent separation with negligible crossover of components with different polarities between fractions was observed. Quantitative analysis of blend levels and individual chemical distribution were achieved. The method has great potential for the identification of biodiesel in diesel fuel blends and could form the basis of a method for characterization of biodiesel-contaminated environmental samples.     

Analysis of oil used in late Roman oil lamps with different mass spectrometric techniques revealed the presence of predominantly olive oil together with traces of animal fat.

The lipid fraction of residues in ancient oil lamps found at the archaeological site of Sagalassos (south-west Turkey) was analysed by gas chromatography (GC) coupled to mass spectrometry (MS). The identification of plant sterols and long chain alcohols suggested that a vegetable oil was used in these lamps. The lipid sample was also analysed with reversed-phase liquid chromatography (LC) coupled to MS with atmospheric pressure chemical ionization (APCI). The identification of TAG's detected with LC-APCI-MS showed that predominantly olive oil was used as a fuel for the antique oil lamps. The presence of large quantities of multiply unsaturated triacylglycerol (TAG) and traces of saturated TAG indicated that also other oils and animal fat were added. Summarizing, the analysis of TAG's with LC-APCI-MS in lipid extracts of ancient ceramics proved to be a valuable method to reconstitute the original contents.     

Headspace microdrop analysis--an alternative test method for gasoline diluent and benzene,toluene, ethylbenzene and xylenes in used engine oils

The primary standard test method used for the determination of gasoline diluent in used engine oils is method D 3525-93 of the American Society for Testing and Materials (ASTM), which involves direct injection of used oil onto a packed GC column and flame ionization detection. Recently, we have utilized a new headspace sampling method: headspace solvent microextraction (HSM), for GC and GC-MS analysis of gasoline diluent in used engine oils. High resolution capillary columns can be used without the necessity for the use of inlet cryogenic cooling or expensive sampling interfaces. This analytical method, which we generically refer to as headspace microdrop analysis yields results comparable to those obtained using the ASTM method, with the added benefit that it allows the quantification of individual volatile diluent components, including benzene, toluene, ethylbenzene and the xylenes.