Thermoresponsive polymer brush on monolithic-silica-rod for the high-speed separation of bioactive compounds

Poly(N-isopropylacrylamide), one of the most utilized thermoresponsive polymers, brush-grafted monolithic-silica columns were prepared through surface-initiated atom transfer radical polymerization (ATRP) for effective thermoresponsive-chromatography matrices. ATRP initiator was grafted on monolithic silica-rod surfaces by flowing a toluene solution containing ATRP initiator into monolithic silica-rod columns. N-Isopropylacrylamide (IPAAm) monomer and CuCl/CuCl(2)/Me(6)TREN, an ATRP catalytic system, were dissolved in 2-propanol, and the reaction solution was pumped into the preprepared initiator-modified columns at 25 °C for 16 h. The constructed PIPAAm-brush structure on the monolithic silica-rod surface was confirmed by XPS, elemental analysis, SEM observation, and GPC measurement of grafted PIPAAm. The prepared monolithic silica-rod columns were also characterized by chromatographic analysis. PIPAAm-brush-modified monolithic silica-rod columns were able to separate hydrophobic steroids with a short analysis time (10 min), compared to PIPAAm-brush-modified silica-beads-packed columns, because of the horizontally limited diffusion path length of monolithic supporting materials. Additionally, diluted PIPAAm-brush monolithic silica-rod column gave a further shorting analysis time (5 min). These results indicated (1) surface-initiated ATRP constructed PIPAAm-brush structures on monolithic silica-rod surfaces and (2) PIPAAm-brush grafted monolithic silica-rod column prepared by ATRP was a promising tool for analyzing hydrophobic-bioactive compounds with a short analysis time.     

Application of monoliths for downstream processing of clotting factor IX

In this paper, the application of monolithic columns for downstream processing of different clotting factor IX concentrates is shown. Determination of basic chromatographic conditions as well as investigations on the regeneration of disk- and tube-shaped monolithic columns using human serum albumin as a model protein, were performed. Separation of factor IX and vitronectin, a possible impurity in commercial factor IX concentrates was accomplished using disk-shaped monolithic columns. These same applications were also carried out with identical results on up-scaled tube-shaped monolithic columns. Since these media allow very fast separations, this method can be successfully applied not only to an in-process control of the purification of factor IX but also to other biopolymers from human plasma. Besides, the same application on the up-scaled tube-shaped monolithic column was successfully carried out.     

Comparison of separation power of ultra performance liquid chromatography and comprehensive two-dimensional liquid chromatography in the separation of phenolic compounds in beverages

In this study, 1-D and 2-D liquid chromatographic systems, namely, conventional HPLC, UPLC, HPLC x HPLC and HPLC x UPLC systems were developed and evaluated for the separation of phenolic acids in wine and juices. In the LC x LC studies, the first dimension separation was based on RPLC and the second dimension was performed with ion-pair chromatography. Three different columns, namely two short columns packed with either 2.5 or 1.7 microm particles and a monolithic column, were tested for the fast second dimension separation. The best results were obtained when the monolithic column was applied for the second dimension separation. The peak capacities for comprehensive 2-D systems varied from 330 to 616.     

Comparison of different types of stationary phases for the analysis of soy isoflavones by HPLC

Nowadays, there are new technologies in high-performance liquid chromatography columns available enabling faster and more efficient separations. In this work, we compared three different types of columns for the analysis of main soy isoflavones. The evaluated columns were a conventional reverse phase particle column, a fused-core particle column, and a monolithic column. The comparison was in terms of chromatographic parameters such as resolution, asymmetry, number of theoretical plates, variability of retention time, and peak width. The lower column pressure was provided by the monolithic column, although lower chromatographic performance was achieved. Conventional and fused-core particle columns presented similar pressure. Results also indicate that direct transfer between particle and monolithic columns is not possible requiring adjustment of conditions and a different method optimization strategy. The best chromatographic performance and separation speed were observed for the fused-core particle column. Also, the effect of sample solvent on the separation and peak shape was evaluated and indicated that monolithic column is the most affected especially when using higher concentrations of acetonitrile or ethanol. Sample solvent that showed the lowest effect on the chromatographic performance of the columns was methanol. Overall evaluation of methanol and acetonitrile as mobile phase for the separation of isoflavones indicated higher chromatographic performance of acetonitrile, although methanol may be an attractive alternative. Using acetonitrile as mobile phase resulted in faster, higher resolution, narrower, and more symmetric peaks than methanol with all columns. It also generated the lower column pressure and flatter pressure profile due to mobile phase changes, and therefore, it presents a higher potential to be explored for the development of faster separation methods.     

Multisyringe ion chromatography with chemiluminescence detection for the determination of oxalate in beer and urine samples

The first multisyringe-based low-pressure ion chromatographic method is presented. It is based on the use of short surfactant coated octadecyl-silica monolithic columns. As a first application, we have determined oxalate in beer and human urine via post-column chemiluminescence detection. Oxalate is separated from the sample matrix in the monolithic column by precise programmable fluid handling, and then detected by reaction with on-line generated tris(2,2??-bipyridyl)ruthenium(III). Column coating, un-coating, ion chromatography and chemiluminescence detection are quickly performed by using a simple low-pressure multi-burette. The factors influencing the separation of oxalate and its subsequent detection, including the column coating with surfactants and its stability have been studied. The chromatographic behavior of the oxalate in presence of potentially interfering species also was assessed. The method has limits of detection and quantification of 0.025 and 0.035?mg?L^?1, respectively, a relative standard deviation of 3.1% (for 10 consecutive measurements without column re-coating) and a throughput of 48?h^?1. The results obtained with real samples were validated by using an enzymatic spectrophotometric test. The method is critically compared to recent methods for the determination of oxalate.

Reversed phase monolithic analytical columns for the determination of HA1 subunit of influenza virus haemagglutinin

Monoliths are chromatographic stationary phases, which were specially designed for efficient purification of large biomolecules, like proteins, viruses and DNA. In this work, the small scale monolithic butyl (C4) and styrene-divinyl benzene (SDVB) columns were applied for reversed phase analyses of various degraded influenza viruses. The binding of the HA1 subunit of haemagglutinin to the monolithic columns was confirmed by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and the Western blot. The working linear range was determined as 1.60 × 10¹⁰ viral particles/mL to at least 1.64 × 10¹¹ viral particles/mL, the limit of detection was found to be 2.56 × 10⁹ virus particles/mL and the limit of quantification was 5.12 × 10⁹ virus particles/mL. The analytical HPLC method developed with the H1N1 virus was also applicable for the analytics of the HA1 subunit of H3N2 influenza virus and the influenza B virus.     

阴离子交换整体柱对蛋白质的分离与纯化

分别用乙二胺、二乙胺、三乙胺将自制的以甲基丙烯酸缩水甘油酯(GMA)为单体、乙二醇二甲基丙烯酸酯(EDMA)为交联剂的整体柱修饰为弱、强阴离子交换整体柱。考察了该整体柱的性能,选择出分离蛋白质(牛血清白蛋白、溶菌酶和谷胱甘肽)的最佳实验条件,并在最佳分离条件下考察了这些蛋白质在整体柱上的色谱行为和该整体柱对纤维素降解酶的分离纯化情况。实验结果表明,该整体柱性能良好,可以实现对纤维素降解酶的快速分离与纯化。同时,实验也证明采用梯度洗脱可以实现对某些蛋白质的分离纯化。     

Development and application of a high-performance liquid chromatography method using monolithic columns for the analysis of ecstasy tablets

A rapid and selective HPLC method using monolithic columns was developed for the separation and quantification of the principal amphetamines in ecstasy tablets. Three monolithic (Chromolith RP18e) columns of different lengths (25, 50 and 100 mm) were assessed. Validation studies including linearity, selectivity, precision, accuracy and limit of detection and quantification were carried out using the Chromolith SpeedROD, RP-18e, 50 mm x 4.6 mm column. Column backpressure and van Deemter plots demonstrated that monolithic columns provide higher efficiency at higher flow rates when compared to particulate columns without the loss of peak resolution. Application of the monolithic column to a large number of ecstasy tablets seized in Ireland ensured its suitability for the routine analysis of ecstasy tablets.     

Fast and efficient separation of immunoglobulin M from immunoglobulin G using short monolithic columns

Certain diagnostic, analytical and preparative applications require the separation of immunoglobulin G (IgG) from immunoglobulin M (IgM). In the present work, different ion-exchange methacrylate monoliths were tested for the separation of IgG and IgM. The strong anion-exchange column had the highest dynamic binding capacity reaching more than 20mg of IgM/ml of support. Additionally, separation of IgM from human serum albumin, a common contaminant in immunoglobulin purification, was achieved on the weak ethylenediamino anion-exchange column, which set the basis for the IgM purification method developed on convective interaction media (CIM) supports. Experiments also confirmed flow independent characteristics of the short monolithic columns.     

有机-无机杂化硅胶基质整体柱的制备及其电色谱性能

采用溶胶-凝胶法,以四乙氧基硅烷和苯基三乙氧基硅烷作为反应单体,通过酸碱两步催化在毛细管中进行原位缩聚反应,制备了新型有机-无机杂化硅胶基质毛细管整体柱,制备过程简单。整体柱基质中均匀分布的苯基基团可直接用于反相毛细管电色谱的分离,因而不需要对基质再进行衍生化。优化了整体柱的制备条件,采用扫描电镜和压汞法对整体柱的微观结构和孔径分布进行了表征。分别考察了溶胶-凝胶初始反应液中水的用量对柱床结构的影响和两种单体的配比对材料孔径分布的影响。研究了稠环芳烃类化合物在整体柱上的保留行为,用所制备的整体柱分离了7种苯酚类化合物,平均柱效达100000塔板/m。     

CEC with monolithic poly(styrene-divinylbenzene-vinylsulfonic acid) as the stationary phase

In this study, poly(styrene-divinylbenzene-vinylsulfonic acid) monolithic columns, prepared by singlestep in situ polymerization, were first used as separation columns for CEC in which vinylsulfonic acid was employed as the charge-bearing monomer. The effects of the polymerization conditions (compositions of monomer and porogenic solvent, and polymerization time) on the chromatographic property of the polystyrene-based monolithic column were examined. Furthermore, an increase in water content of the porogenic solvent markedly altered the retention behaviors of these analytes, where the monolithic column was able to be produced in a higher ratio of vinylsulfonic acid. Finally, the study demonstrated that acidic analytes could be successfully separated by the polystyrene-based monolithic column under an acidic mobile phase.     

聚二乙烯苯整体柱的制备及其在气相色谱分析中的应用

初步探讨了毛细管整体柱的制备方法及其在气相色谱分析中的应用。以液相色谱用毛细管整体柱作为研究基础,通过改变甲苯和十二醇的比例,使整体柱适用于气相色谱分析。通过二乙烯苯与键合在管壁上的3-(异丁烯酰氯)丙基三甲氧基硅烷(TMP)键合以及其自身的聚合,获得具有牢固结构、良好机械强度的整体柱。将其用于混合溶剂的分析和白酒标样的分析,可直接分析水中低碳醇。与现有的商品柱进行比较,结果表明所制备的整体柱均优于用以对照的商品色谱柱,其中在混合溶剂的分析中,醇类、酯类、酮类和芳烃类的峰形均优于用于比较的多孔层开口管(PLOT)柱;在白酒标样分析中,使得乙醛、甲醇、乙酸乙酯的色谱峰能够分开,比现有的聚乙二醇(PEG-20M)柱的分析方法更为便捷。     

Determination of the porosities of monolithic columns by inverse size-exclusion chromatography

Retention data of polystyrene samples of narrow molecular size distribution and known average molecular mass were measured on several monolithic columns (Chromolith Performance, Merck) and one conventional packed column (Luna C18, Phenomenex) by size-exclusion chromatography. These data were used to determine the external, the internal, and the total porosities of these columns. These data provided also information on the pore-size distribution of the adsorbent medium. The external and the total porosities of these columns are much higher than those of conventional packed columns. The results illustrate the profound changes brought by monolithic columns to the balance of the hydrodynamic and the mass transfer kinetic properties of chromatographic columns. Classical methods of comparison between column performance must be re-evaluated.     

Studies on azaspiracid biotoxins. I. Ultrafast high-resolution liquid chromatography/mass spectrometry separations using monolithic columns

In this study, the performance of monolithic columns was evaluated for ultrafast liquid chromatography/mass spectrometry (LC/MS) analyses and for high-resolution separations of several azaspiracid biotoxin analogs. Because of their high permeability, monolithic columns offer a number of advantages over conventional packed columns; viz., very low backpressures and relatively flat van Deemter curves at high flow rates. That is, very high flow rates can be used for ultrafast analyses or, by using longer than normal columns, high-resolution separations are possible. In a series of experiments, we varied the mobile phase flow rates between 1 and 8 mL/min, and studied their impact on chromatographic parameters such as retention time, resolution, number of plates and pressure. The chromatographic run times could be reduced to ca. 30 s without a significant change in the separation efficiency. A signal intensity comparison revealed interesting differences between atmospheric-pressure chemical ionization (APCI) and electrospray ionization (ESI) in their flow-rate dependency. An explanation with respect to the behavior as of a mass-flow or a concentration-dependent device is given in the paper. Additionally, the column length was varied between 10 and 70 cm. As a result, the number of theoretical plates increased substantially. In the example shown in the report, an increase from 13 000 plates for a 10-cm column to 80 000 for a 70-cm column is demonstrated. In addition, the potential of the monolithic columns for high-resolution LC/MS separations is shown for a complex biotoxin mixture, which was separated on a 40-cm-long column.     

Characterization of some physical and chromatographic properties of monolithic poly(styrene-co-divinylbenzene) columns

Monolithic capillary columns were prepared by copolymerization of styrene and divinylbenzene inside a 200 microm i.d. fused silica capillary using a mixture of tetrahydrofuran and decanol as porogen. Important chromatographic features of the synthesized columns were characterized and critically compared to the properties of columns packed with micropellicular, octadecylated poly(styrene-co-divinylbenzene) (PS-DVB-C18) particles. The permeability of a 60 mm long monolithic column was slightly higher than that of an equally dimensioned column packed with PS-DVB-C18 beads and was invariant up to at least 250 bar column inlet pressure, indicating the high-pressure stability of the monolithic columns. Interestingly, monolithic columns showed a 3.6 times better separation efficiency for oligonucleotides than granular columns. To study differences of the molecular diffusion processes between granular and monolithic columns, Van Deemter plots were measured. Due to the favorable pore structure of monolithic columns all kind of diffusional band broadening was reduced two to five times. Using inverse size-exclusion chromatography a total porosity of 70% was determined, which consisted of internodule porosity (20%) and internal porosity (50%). The observed fast mass transfer and the resulting high separation efficiency suggested that the surface of the monolithic stationary phase is rather rough and does not feature real pores accessible to macromolecular analytes such as polypeptides or oligonucleotides. The maximum analytical loading capacity of monolithic columns for oligonucleotides was found to be in the region of 500 fmol, which compared well to the loading capacity of the granular columns. Batch-to-batch reproducibility proved to be better with granular stationary phases compared to monolithic stationary phase, in which each column bed is the result of a unique column preparation process.     

Structure and performance of silica-based monolithic HPLC columns

Silica-based monolithic columns were prepared for HPLC with systematic variations of the tetramethoxysilane (TMOS) and polyethylene oxide (PEO) content as reactants in a sol-gel process accompanied by phase separation. The resulting monoliths showed differences in the macropore and silica skeleton diameter as well as in the corresponding domain sizes (the sum of macropore and skeleton diameter). All monoliths were synthesized with a diameter of 4.6 mm and cladded with a suitable polyaryletheretherketone (PEEK) polymer in a standardized and optimized manner for the subsequent chromatographic evaluation of the resulting monolithic HPLC columns. The columns were tested under normal phase conditions using n-heptane/dioxane (95:5 v/v) as a mobile phase and 2-nitroanisole as a test compound for the determination of separation efficiency and permeability. Two different sets of columns were prepared: the first one in which the amount of PEO was stepwise decreased to yield monoliths with identical macropore volumes and variations in the domain sizes. The second group of materials was synthesized adjusting both TMOS and PEO quantities to yield monolithic columns with identical macropore diameters of about 1.80 microm but different skeleton diameters and macropore volumes. The chromatographic results suggest that an increase in the column performance cannot be achieved by just arbitrarily decreasing the domain size of a given column. From a certain point of "downsizing" the monolithic structure a loss of structural homogeneity can be observed, which is apparently responsible for a lower chromatographic performance.     

Preparation of a monolithic column for weak cation exchange chromatography and its application in the separation of biopolymers

A procedure for the preparation of a monolithic column for weak cation exchange chromatography was presented. The structure of the monolithic column was evaluated by mercury intrusion. The hydrodynamic and chromatographic properties of the monolithic column--such as back pressures at different flow rates, effects of pH on protein retention, dynamic loading capacity, recovery, and stability--were determined under conditions typical for ion-exchange chromatography. The prepared monolithic column might be used in a relatively broad pH range from 4.0 to 12.0 and exhibited an excellent separation to five proteins at the flow rates of both 1.0 and 8.0 mL/min, respectively. In addition, the prepared column was first used in the purification and simultaneous renaturation of recombinant human interferon gamma (rhIFN-gamma) in the extract solution with 7.0 mol/L guanidine hydrochloride. The purity and specific bioactivity of the purified rhIFN-gamma in only one chromatographic step were obtained to be 93% and 7.8 x 10(7) IU/mg, respectively.     

Performance of a non-grafted monolithic support for purification of supercoiled plasmid DNA

The use of therapeutics based on plasmid DNA (pDNA) relies on procedures that efficiently produce and purify the supercoiled (sc) plasmid isoform. Several chromatographic methods have been applied for the sc plasmid purification, but with most of them it is not possible to obtain the required purity degree and the majority of the supports used present low capacity to bind the plasmid molecules. However, the chromatographic monolithic supports are an interesting alternative to conventional supports due to their excellent mass transfer properties and their high binding capacity for pDNA. The separation of pDNA isoforms, using short non-grafted monolithic column with CarbonylDiImidazole (CDI) functional groups, is described in the current work. The effect of different flow rates on plasmid isoforms separation was also verified. Several breakthrough experiments were designed to study the effect of different parameters such as pDNA topology and concentration as well as flow rate on the monolithic support binding capacity. One of the most striking results is related to the specific recognition of the sc isoform by this CDI monolith, without flow rate dependence. Additionally, the binding capacity has been found to be significantly higher for sc plasmid, probably because of its compact structure, being also improved when using feedstock with increased plasmid concentrations and decreased linear velocity. In fact, this new monolithic support arises as a powerful instrument on the sc pDNA purification for further clinical applications.     

Preparation of convection interaction media isobutyl disc monolithic column and its application to purification of secondary alcohol dehydrogenase and alcohol oxidase

A convection interaction media (trade name CIM, BIA Separation, Ljubljana, Slovenia) isobutyl monolithic disc was prepared by incubating a CIM epoxy monolithic disc with isobutylamine, and it was then applied to the purification of secondary alcohol dehydrogenase (S-ADH) and primary alcohol oxidase (P-AOD). Both enzymes were adsorbed on this column and eluted with high purity. Thus, S-ADH was purified to an electrophoretically homogeneous state by four column chromatographies using CIM DEAE-8 and CIM C4-8 tube monolithic columns, blue-Sepharose column and CIM isobutyl disc monolithic column. P-AOD was also purified to an electrophoretically homogeneous state by three column chromatographies of CIM DEAE-8 tube, CIM C4-8 tube and CIM isobutyl disc columns.     

Peptide mapping by reversed-phase high-performance liquid chromatography employing silica rod monoliths

In this paper, a general procedure is described for the generation of peptide maps of proteins with monolithic silica-based columns. The peptide fragments were obtained by tryptic digestion of various cytochrome c species with purification of the tryptic fragments achieved by reversed-phase high-performance liquid chromatographic methods. Peak assignment of the various peptides was based on evaluation of the biophysical properties of the individual peptides and via mass spectrometric identification. The performance of several different monolithic sorbents prepared as columns of identical cross-sectional dimensions were investigated as part of these peptide mapping studies and the data evaluated by applying solvent strength theory. These studies revealed curvilinear dependencies in the corresponding relative resolution maps. These findings directly impact on the selection of specific sorbent types or column configurations for peptide separations with silica rod monoliths. Moreover, the influence of variations in the amino acid sequence of the cytochrome cs were evaluated with respect to their effect on intrinsic hydrophobicity, the number of experimental observed tryptic cleavage sites, detection limits of the derived fragments in relation to their molecular size, and the chromatographic selectivity and resolution of the various peptides obtained following enzymatic fragmentation of the parent protein. Finally, the scope of these approaches in method development was examined in terms of robustness and efficiency.