Supercapacitive behaviors of the nitrogen-enriched activated mesocarbon microbead in aqueous electrolytes

The activated nitrogen-enriched novel carbons (a-NENCs) have been prepared by direct carbonization of polyaniline/activated mesocarbon microbead composites and further activated by 16 M?HNO₃. The electrochemical performances and supercapacitive behaviors of the a-NENCs in 6 M KOH, 1 M?H₂SO₄, and 0.5 M?K₂SO₄ solutions are evaluated by cyclic voltammetry, galvanostatic charge/discharge, electrochemical impedance spectroscopy, cyclic life, leakage current, and self-discharge measurements. The results demonstrate that the supercapacitors perform definitely supercapacitive behaviors; especially in 6 M KOH electrolyte, the supercapacitor represents much better electrochemical performance with more excellent reversibility, shorter relaxation time of 1.11 s, and nearly ideal polarizability. The maximum specific capacitance of the supercapacitors using a-NENCs as active electrode material is 85.1 F?g^?1 at a rate of 500 mA?g^?1 in 6 M?KOH. These outcomes indicate that the 6 M?KOH aqueous solution is a promising electrolyte for the supercapacitor with a-NENCs as electrode material.     

Pyridine-containing metal-organic frameworks as precursor for nitrogen-doped porous carbons with high-performance capacitive behavior

A novel pyridine-containing metal-organic framework (MOF, [Zn(bpdc)DMA]·DMF, bpdc = 2,2′-bipyridine-5,5′-dicarboxylate) was directly carbonized at different temperature to produce nitrogen-doped porous carbons (NPCs). The as-prepared porous carbons, NPC800 (obtained at 800 °C) and NPC1000 (obtained at 1000 °C), were characterized by scanning electron microscopy, X-ray powder diffraction, N₂ sorption isotherms, and X-ray photoelectron spectroscopy (XPS). The results from elemental analysis and XPS confirmed that the pyridine groups in MOF served as nitrogen sources to produce NPCs, and NPC800 possessed the higher nitrogen content than NPC1000. N₂ sorption data demonstrated that NPC800 exhibited the larger specific surface area and pore volume than NPC1000. The capacitive properties of NPC800 and NPC1000 were investigated in KOH aqueous electrolyte by cyclic voltammetry and galvanostatic charge–discharge curves. NPC800 showed the higher specific capacitance (226.6 F g^?1 at 1 A g^?1) than NPC1000 and retained 178.0 F g^?1 even at a high current density up to 10 A g^?1. It was found that the donation of N species to capacitance was more than the role of porosity in view of their synergetic effect.     

Hierarchical mesoporous carbon materials: preparation by direct tri-constituent co-assembly and the electrochemical performance

Hierarchical mesoporous carbon materials with large microporosity were prepared by direct tri-constituent co-assembly with the use of resols as the carbon precursor, tetraethyl orthosilicate as the inorganic precursor, and triblock copolymer F127 as the soft template. Bimodal pore size distributions in the range of 1.5–4 and 7.5–12 nm were obtained in the synthesized hierarchical mesoporous carbon materials after etching of silica by HF acid, showing a high surface area of 1,675 m²?g^?1 with a large pore volume of 2.06 cm³?g^?1. The electrochemical performance of the hierarchical mesoporous carbons was evaluated as an electrode material for electrochemical supercapacitor, showing a specific capacitance as high as 152 F?g^?1 at a scan rate of 5 mV?s^?1 in 6 M KOH aqueous solution and a good cycling stability with capacitance retention of 99 % over 500 cycles.     

Nitric acid oxidation of ordered mesoporous carbons for use in electrochemical supercapacitors

Ordered mesoporous carbon materials with high microporosity were synthesized by a low temperature autoclaving of citric acid-catalyzed polymerized resorcinol/formaldehyde in the presence of the triblock copolymer F127 and were activated by nitric acid oxidation. The materials were used as electrode materials in electrochemical supercapacitors. A bimodal pore size distribution of 2.1–2.3 and 5.3 nm with a surface area of 465–578 m² g^?1 and pore volume of 0.44–0.54 cm³ g^?1 was obtained with the retention of an ordered mesoporous structure after nitric acid (2 M) treatment. The introduced functional groups produced a pseudocapacitance, which resulted in an increase in the specific capacitance. The electrochemical capacitance of the resulting mesoporous carbons showed a marked increase after 3 h of nitric acid activation, exhibiting a high value of 295 F g^?1 at the scan rate of 10 mV s^?1 in 6 M KOH aqueous solution and good cycling stability with specific capacitance retention over 500 cycles.     

Excellent electrochemical performance of nitrogen-enriched hierarchical porous carbon electrodes prepared using nano-CaCO3 as template

Recently, tremendous research efforts have been concentrated on developing high-performance electrode materials to meet the ever-increasing energy and power demands in supercapacitors. Herein, we presented a high-capacity supercapacitor material based on nitrogen-enriched hierarchical porous carbons (NHPCs) synthesized by the carbonization of melamine formaldehyde resins using eco-friendly and inexpensive nano-CaCO₃ as template. The effects of carbonization temperature and template content on the porous structure and electrochemical characteristics were compared and discussed in detail. The prepared NHPCs possessed large surface area up to 834 m² g^?1 and high nitrogen content up to 20.94 wt %. As electrode material for supercapacitors, NHPCs exhibited superior electrochemical performances with high specific capacitance (190 F g^?1 at 20 A g^?1), outstanding rate capability (80 %), and excellent cycling stability (over 2,000 cycles at 5 A g^?1) in 1 M sulfuric acid media. The excellent electrochemical performances are due to the synergic effects of unique hierarchical porous microstructure, abundant nitrogen and oxygen functionalities, as well as high degree of graphitization framework.     

Effect of surfactant on the morphology and capacitive performance of porous NiCo2O4

A promising nickel cobaltite oxide (NiCo₂O₄) composite electrode material was successfully synthesized by a sol-gel method and followed by a simple sintering process. The microstructure and surface morphology of NiCo₂O₄ modified by hexadecyltrimethylammonium bromide (CTAB) and polyvinyl alcohol were physically characterized by powder X-ray diffraction and scanning electron microscopy. Meanwhile, electrochemical performance was widely investigated in 2 M KOH aqueous electrolyte using cyclic voltammetry, galvanostatic charge-discharge test, and electrochemical impedance spectroscopy. The results show that evident porous microstructure was successfully fabricated by CTAB. The NiCo₂O₄ controlled by CTAB exhibited highly specific capacitance of 1,440 F?g^?1 at a current density of 5 mA?cm^?2. Remarkably, it still displays desirable cycle retention of 94.1 % over 1,000 cycle numbers at a current density of 20 mA?cm^?2. The excellent electrochemical performance suggests its potential application in electrode material for electrochemical capacitors.     

Preparation and performance of polyvinyl alcohol-based activated carbon as electrode material in both aqueous and organic electrolytes

Porous carbon materials with high surface area and different pore structure have been successfully prepared by phenolic resin combined with polyvinyl alcohol (PVA) and KOH as activation agents. The surface morphology, structure, and specific surface area of the carbon materials were studied by scanning electron microscopy, X-ray diffraction, and nitrogen sorption measurement, respectively. Furthermore, the effects of specific surface area, pore structure, and electrolyte on electrochemical properties were investigated by galvanostatic charge–discharge measurement. The results show that KOH–PVA-activated carbon materials display specific capacitance as high as 218 F?g^?1 in 30 wt.% KOH aqueous electrolyte, 147 F?g^?1 in 1 M LiPF₆/(ethylene carbonate (EC) + dimethyl carbonate) (1:1?v/v), and 115 F?g^?1 in 1 M Et₃MeNBF₄/propylene carbonate organic electrolyte, respectively. In addition, the carbon materials demonstrate long-term cycle stability, especially the AK3P-0.30 in aqueous electrolyte and the AK2P-0.30 with excellent rate capability in organic electrolyte. These reveal that the existence of a micro-mesoporous structure of activated carbon is beneficial to store energy in an aqueous supercapacitor and broad pore size distribution of activated carbon is favorable to energy storage in an organic supercapacitor. The carbon materials with pore size distribution in different ranges improve the electrochemical performance of supercapacitor in different electrolytes. A new pore-expand agent (PVA combining with KOH) was used to obtain porous carbons with enhanced properties for supercapacitor.     

Synthesis of micro- and mesoporous carbon spheres for supercapacitor electrode

Micro- and mesoporous carbon spheres (MMCSs) are synthesized by the polymerization of colloidal silica-entrapped resorcinol/formaldehyde in the presence of ammonia as catalyst, followed by carbonization, sodium hydroxide (NaOH) etching to remove silica template, and potassium hydroxide (KOH) activation. The morphology and microstructure are characterized by scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption. The results show that a typical sample (denoted as MMCS-3) unites the characteristics of regular spherical shape (uniform diameters of 500 nm), high specific surface area (1,620 m² g^?1), large pore volume (1.037 cm³ g^?1), and combined micropores and mesopores (11.0 nm), which endows MMCS-3 good electrochemical performance. MMCS-3 as supercapacitor electrode shows a specific capacitance of 314 F g^?1 under a current density of 0.5 A g^?1 and low internal resistance of 0.2 Ω in 6 M KOH aqueous solution. The electrochemical capacitance still retains 198 F g^?1 at a high current density of 10 A g^?1. After 500 cycle numbers of galvanostatic charge/discharge at 0.5 A g^?1, MMCS-3 electrode still remains the specific capacitance of 301 F g^?1 with the retention of 96 %. This study highlights the potential of well-designed MMCSs as electrodes for widespread supercapacitor applications.     

Influence of KMnO4 oxidation on the electrochemical performance of pitch-based activated carbons

In this work, activated carbons (ACs) are obtained from petroleum pitch by the combination of a chemical treatment with different potassium permanganate (KMnO₄) amounts, i.e., 0, 0.5, 1.0, and 2.0 g, and a chemical activation with KOH at a constant KOH/pitch ratio of 3/1. The effects of the chemical activating agent on the surface morphology and porosity are evaluated with scanning electron microscopy and N₂ adsorption isotherms at 77 K, respectively. The specific surface area of the pitch-based ACs is increased with increasing the amount of KMnO₄ pre-treatment and showed the highest value of 2,334 m² g^?1 at 2 g of KMnO₄ amount. The electrochemical performance of AC electrodes is examined by cyclic voltammetry and galvanostatic charge/discharge characteristics in 6 M KOH electrolyte. Among the prepared ACs, 2.0 K-ACs possesses a specific capacitance as high as 237 F g^?1 and showed excellent electrochemical performance due to its suitable porous structure and low interface resistance.     

Dual template method to prepare hierarchical porous carbon nanofibers for high-power supercapacitors

Hierarchical porous carbon nanofibers serving as electrode materials are prepared through carbonization and hydrofluoric acid treatment of polyacrylonitrile-based electrospinning involving dual templates. The hierarchical porous structures are synergistically tailored by varying template contents in the spinning solution. The carbon nanofibers prepared from the electrospinning of polyacrylonitrile containing 15/15 wt.% polymethylmethacrylate/tetraethyl orthosilicate exhibit the largest specific surface area (699 m² g^?1) and microporous volume (0.196 cm³ g^?1). In 6 M KOH electrolyte, a symmetrical supercapacitor equipped with the hierarchical porous carbon nanofibers demonstrates its high-end specific capacitance of 170 F g^?1, superior rate capability, and high-power density output up to 14.7 kW kg^?1. Cycling evolution indicates capacitance fading is only 5.8 % of initial capacitance at a current density of 1 A g^?1 even after 8,000 cycles. The excellent electrochemical performances of the carbon nanofiber are mainly ascribed to the optimized pore size distributions of both micropores and mesopores and the unique hierarchical pore structures possessed by abundant micropores.     

Mesopore-dominant porous carbon derived from bio-tars as an electrode material for high-performance supercapacitors

For the first time, toxic bio-tars collected from the gasification of pine sawdust are used as the precursor for activated carbons. Various types of activation agents including KOH, K₂CO₃, H₃PO₄ and ZnCl₂ were screened for obtaining superior activated carbons. When KOH was used as an activation agent, the obtained activated carbons exhibited high specific surface area and large mesopore volume. The activated carbons were further employed to be the electrode material of supercapacitors, and its specific capacitance reached up to 260 F g^?1 at 0.25 A g^?1 current density. Also, it showed an excellent rate performance from preserving a relatively high specific capacitance of 151 F g^?1 at 50 A g^?1. The assembled device also exhibited the good electrochemical stability with the capacity retention of 90% after 5000 cycles. Furthermore, the maximum energy density of the activated carbons in organic electrolyte reached 17.8 Wh kg^?1.     

From nickel oxalate dihydrate microcubes to NiS<Subscript>2</Subscript> nanocubes for high performance supercapacitors

In this study, NiS₂ nanocubes were successfully synthesized by a novel facile solvothermal method using NiC₂O₄·2H₂O microstructures and used as an electrode for high-performance supercapacitors. The electrochemical properties of the prepared NiS₂ electrode were studied using galvanostatic charge–discharge analysis, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) studies. Its maximum specific capacitance was 2077 F g^?1 at a constant current density of about 0.65 A g^?1. Further, the EIS results confirmed the pseudocapacitive nature of the NiS₂ electrode. The experimental results suggested that the NiS₂ electro-active material demonstrates excellent electrochemical performance with high specific capacitance, low resistance, and excellent cycling stability.     

Facile synthesis of biomass-derived hierarchical porous carbon microbeads for supercapacitors

Using the facile method of solvent evaporation, the leonardite fulvic acids (LFA)-based porous carbon microbeads (PCM) have been successfully prepared at ambient pressure, followed by carbonization and KOH activation (a low mass ratio alkali/LFA = 1.5) in an inert atmosphere. The effects of KOH treatment on pore structures and the formation mechanism of the PCM were discussed. The results showed that the sample exhibited remarkable improvement in textural properties. The activated carbon microbeads had high surface area (2269 m² g^?1), large pore volume (1.97 cm³ g^?1), and displayed excellent capacitive performances, compared with carbon powder. The porous carbon material electrodes with the “porous core structure” behaved superiorly at a specific capacitance of 320 F g^?1 at a current density of 0.05 A g^?1 in 6 M KOH electrolyte, which could still remain 193 F g^?1 when the current density increased to 100 A g^?1. Remarkably, in the 1 M TEABF₄/PC electrolyte, the PCM samples could reach 156 F g^?1 at 0.05 A g^?1, possess an outstanding energy density of 39.50 Wh kg^?1, and maintain at 22.05 Wh kg^?1 even when the power density rose up to 5880 W kg^?1. The balance of structural characteristic and high performance makes the porous carbon microbeads a competitive and promising supercapacitor electrode material.     

Layered LiNi<Subscript>0.80</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> as cathode material for hybrid Li<Superscript>+</Superscript>/Na<Superscript>+</Superscript> batteries

LiNi_0.80Co_0.15Al_0.05O₂ (NCA) is explored to be applied in a hybrid Li⁺/Na⁺ battery for the first time. The cell is constructed with NCA as the positive electrode, sodium metal as the negative electrode, and 1 M NaClO₄ solution as the electrolyte. It is found that during electrochemical cycling both Na⁺ and Li⁺ ions are reversibly intercalated into/de-intercalated from NCA crystal lattice. The detailed electrochemical process is systematically investigated by inductively coupled plasma-optical emission spectrometry, ex situ X-ray diffraction, scanning electron microscopy, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The NCA cathode can deliver initially a high capacity up to 174 mAh g^?1 and 95% coulombic efficiency under 0.1 C (1 C?=?120 mA g^?1) current rate between 1.5–4.1 V. It also shows excellent rate capability that reaches 92 mAh g^?1 at 10 C. Furthermore, this hybrid battery displays superior long-term cycle life with a capacity retention of 81% after 300 cycles in the voltage range from 2.0 to 4.0 V, offering a promising application in energy storage.     

Activated nitrogen-doped carbons from polyvinyl chloride for high-performance electrochemical capacitors

Activated nitrogen-doped carbons (ANCs) were prepared by carbonization/activation approach using aminated polyvinyl chloride (PVC) as precursor. ANCs exhibit larger porosities and higher specific surface areas than those of their nitrogen-free counterparts for the same KOH/carbon ratio. The specific surface area of ANC-1 is up to 1,398 m² g^?1 even at a low KOH/carbon ratio of 1:1. Fourier transform infrared spectroscopy investigation of the nitrogen-enriched resin precursor indicates the efficient dehydrochlorination of PVC by ethylenediamine at a low temperature. The nitrogen content and the population of nitrogen functionalities strongly depend on the KOH/carbon ratios and decrease drastically after KOH activation as seen from the elemental and X-ray photoelectron spectroscopy analysis. The surface concentration of N-6 and N-Q almost disappears and the dominant nitrogen groups become N-5 after KOH activation. The highest specific capacitance of ANCs is up to 345 F g^?1 at a current density of 50 mA g^?1 in 6 M KOH electrolyte. ANCs also exhibit a good capacitive behavior at a high scan rate of 200 mV s^?1 and an excellent cyclability with a capacitance retention ratio as high as ～93 % at a current density of 2,000 mA g^?1 for 5,000 cycles.     

Electrospun porous MnMoO<Subscript>4</Subscript> nanotubes as high-performance electrodes for asymmetric supercapacitors

MnMoO₄ nanotubes of diameter about 120 nm were successfully synthesized by a single-spinneret electrospinning technique followed by calcination in air, and their structural, morphological, and electrochemical properties were studied with the aim to fabricate high-performance supercapacitor devices. The obtained MnMoO₄ nanotubes display a 1D architecture with a porous structure and hollow interiors. Benefiting from intriguing structural features, the unique MnMoO₄ nanotube electrodes exhibit a high specific capacitance, excellent rate capability, and cycling stability. As an example, the tube-like MnMoO₄ delivers a specific capacitance of 620 F g^?1 at a current density of 1 A g^?1, and 460 F g^?1 even at a very high current density of 60 A g^?1. Remarkably, almost no decay in specific capacitance is found after continuous charge/discharge cycling for 10,000 cycles at 1 A g^?1. An asymmetric supercapacitor fabricated from this MnMoO₄ nanotubes and activated carbon displayed a maximum high energy density of 31.7 Wh kg^?1 and a power density of 797 W kg^?1, demonstrating a good prospect for practical applications in energy storage electronics.     

KOH-activated nitrogen-doped graphene by means of thermal annealing for supercapacitor

KOH-activated nitrogen-doped graphene nanosheets (aNG) have been synthesized using thermal annealing method and applied in supercapacitor. The samples are characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, and electrochemical techniques. Electrochemical results show that a capacitance of 132.4 F g^?1 at a charge/discharge current density of 0.1 A g^?1 is obtained for KOH-activated nitrogen-doped graphene which is nearly five times larger than that without KOH treatment. The present work demonstrates that KOH activation of thermally annealed nitrogen-doped graphene is a promising method for enhancing its application in energy storage system.     

Hierarchical Activated Mesoporous Phenolic‐Resin‐Based Carbons for Supercapacitors

A series of hierarchical activated mesoporous carbons (AMCs) were prepared by the activation of highly ordered, body‐centered cubic mesoporous phenolic‐resin‐based carbon with KOH. The effect of the KOH/carbon‐weight ratio on the textural properties and capacitive performance of the AMCs was investigated in detail. An AMC prepared with a KOH/carbon‐weight ratio of 6:1 possessed the largest specific surface area (1118 m² g^?1), with retention of the ordered mesoporous structure, and exhibited the highest specific capacitance of 260 F g^?1 at a current density of 0.1 A g^?1 in 1 M H₂SO₄ aqueous electrolyte. This material also showed excellent rate capability (163 F g^?1 retained at 20 A g^?1) and good long‐term electrochemical stability. This superior capacitive performance could be attributed to a large specific surface area and an optimized micro‐mesopore structure, which not only increased the effective specific surface area for charge storage but also provided a favorable pathway for efficient ion transport.     

KOH direct treatment of kombucha and in situ activation to prepare hierarchical porous carbon for high-performance supercapacitor electrodes

Kombucha, a renewable biomass, has been successfully utilized as an accessible carbon source to fabricate kombucha-derived hierarchical porous carbon (KHPC) by KOH direct treatment and in situ activation. The prepared KHPC shows an interconnected hierarchical porous structure, a pore volume of 0.41 cm³ g^?1, and a specific surface area of 917 m² g^?1. Due to the multiple synergistic effects of these advantages, the KHPC-3 exhibits a high specific capacitance of 326 F g^?1 at a current density of 1 A g^?1 in 6 M KOH, good rate capability of 82% retention from 1 to 20 A g^?1, and cycling performance with 91.3% retention over 5000 cycles. Moreover, the KHPC-3 symmetric supercapacitor reveals a good energy density of 20.97 Wh kg^?1 at a power density of 871.2 W kg^?1 and retains 8.08 Wh kg^?1 at 6330 W kg^?1 in 1 M Na₂SO₄ electrolyte. Therefore, the KHPC obtained via the simple synthesis process shows great promise as an electrode material in energy storage devices.     

Enhanced electrochemical properties of pseudocapacitor with Bi<Subscript>3.64</Subscript>Mo<Subscript>0.36</Subscript>O<Subscript>6.55</Subscript> NPs as electrodes

In this work, Bi_3.64Mo_0.36O_6.55 nanoparticles (NPs) were successfully prepared by a facile hydrothermal method and utilized in pseudocapacitor for the first time. Within a redox potential range from ?1.0 to 0 V vs. Hg/HgO in a 1 M aqueous KOH solution by cyclic voltammetry (CV), chronopotentiometry (CP) and AC impendence, the specific capacitance could reach 998 F g^?1 at 1 A g^?1, which is possibly ascribed to the higher Bi content of Bi_3.64Mo_0.36O_6.55 NPs. Furthermore, the Bi_3.64Mo_0.36O_6.55 NP electrode exhibited good cycle stability maintaining over 85 % after 5000 cycles. These results demonstrated Bi_3.64Mo_0.36O_6.55 NPs might be a promising electrode material for pseudocapacitor.

Open image in new window

Graphical abstract The fabrication of uniform Bi_3.64Mo_0.36O_6.55 nanoparticles with a diameter of 100 nm were succefully reported by a facial hydrothermal method, which exhibits a extraordinary electronic performance with 998 F g^-1 at 1 A g^-1 and cycling stability