Optical,electrical, and electrochemical behavior of p-type nanostructured SnO<Subscript>2</Subscript>:Ni (NTO) thin films

The physical and electrochemical properties of sol-gel synthesized nickel-doped tin oxide (NTO) thin films were investigated. The X-ray diffraction results showed that NTO samples exhibited a tetragonal structure. The average crystallite size and the unit cell volume of the films were reduced by Ni increment, while the stacking fault probability was increased. Furthermore, the field-emission scanning electron microscopy images clearly displayed that the worm-like surface morphology of the SnO₂ thin films was altered to the spherical feature in 3 and 10 mol% NTO samples. Moreover, by virtue of Ni incorporation, the average transparency of the SnO₂ thin films rose up from 67 to 85% in the visible region; also, the optical band gap of the SnO₂ sample (3.97 eV) increased and the thin film with 3 mol% dopant concentration showed a maximum value of 4.22 eV. The blue/green emission intensities of photoluminescence spectra of SnO₂ thin film changed via Ni doping. The Hall effect measurements revealed that by Ni addition, the electrical conductivity of tin oxide thin films altered from n- to p-type and the carrier concentration of the films decreased due to the role of Ni²⁺ ions which act as electron acceptors in NTO films. In contrast, 20 mol% Ni-doped sample had the highest mobility about 9.65 cm² (V s)^?1. In addition, the cyclic voltammogram of NTO thin films in KOH electrolyte indicated the charge storage capacity and the surface total charge density of SnO₂ thin films enhanced via Ni doping. Moreover, the diffusion constant of the samples increased from 2?×?10^?15 to 6.5?×?10^?15 cm² s^?1 for undoped and 5 mol% dopant concentration. The electrochemical impedance spectroscopy of the NTO thin films in two different potentials showed the different electrochemical behaviors of n- and p-type thin films. It revealed that the 20 mol% NTO thin film had maximum charge transfer at lower applied potential.     

Carbon ceramic electrodes modified with mixed oxides SiO<Subscript>2</Subscript>/SnO<Subscript>2</Subscript> for determination of levofloxacin

The preparation of a carbon ceramic electrode modified with SnO₂ (CCE/SnO₂) using tin dibutyl diacetate as precursor was optimized by a 2³ factorial design. The factors analyzed were catalyst (HCl), graphite/organic precursor ratio, and inorganic precursor (dibutyltin diacetate). The statistical treatment of the data showed that only the second-order interaction effect, catalyst × inorganic precursor, was significant at 95% confidence level, for the electrochemical response of the system. The obtained material was characterized by scanning electron microscopy (MEV), X-ray diffraction (XRD), RAMAN spectroscopy, XPS spectra, and voltammetric techniques. From the XPS spectra, it was confirmed the formation of the Si–O–Sn bond by the shift in the binding energy values referred to Sn 3d3/2 due to the interaction of Sn with SiOH species. The incorporation of SnO₂ provided an increment of the electrode response for levofloxacin, with Ipa = 147.0 μA for the ECC and Ipa = 228.8 μA for ECC/SnO₂, indicating that SnO₂ when incorporated into the silica network enhances the electron transfer process. Under the optimized working conditions, the peak current increased linearly with the levofloxacin concentration in the range from 6.21×10^?5 to 6.97×10^?4 mol L^?1 with quantification and detection limits of 3.80×10^?5 mol L^?1 (14.07 mg L^?1) and 1.13×10^?5 mol L^?1 (4.18 mg L^?1), respectively.     

Correlation between the structural,electrical and electrochemical performance of layered Li(Ni<Subscript>0.33</Subscript>Co<Subscript>0.33</Subscript>Mn<Subscript>0.33</Subscript>)O<Subscript>2</Subscript> for lithium ion battery

The Li(Ni_0.33Co_0.33Mn_0.33)O₂ (LNCMO) cathode material is prepared by poly(vinyl pyrrolidone) (PVP)-assisted sol-gel/hydrothermal and poly(ethylene glycol)-block-poly(propylene glycol)-block-poly (ethylene glycol) (Pluronic-P123)-assisted hydrothermal methods. The compound prepared by PVP-assisted hydrothermal method shows a comparatively higher electrical conductivity of ~2?×?10^?5 S cm^?1 and exhibits a discharge capacity of 152 mAh g^?1 in the voltage range of 2.5 to 4.4 V, for a C-rate of 0.2 C, whereas the compounds prepared by P123-assisted hydrothermal method and PVP-assisted sol-gel method show a total electrical conductivity in the order of 10^?6 S cm^?1 and result in poor electrochemical performance. The structural and electrical properties of LNCMO (active material) and its electrochemical performance are correlated. The difference in percentage of ionic and electronic conductivity contribution to the total electrical conductivity is compared by transference number studies. The cation disorder is found to be the limiting factor for the lithium ion diffusion as determined from ionic conductivity values.     

Electrochemical performance of novel Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> glass-ceramic nanocomposites as electrodes for energy storage devices

The novel Li₃V₂(PO₄)₃ glass-ceramic nanocomposites were synthesized and investigated as electrodes for energy storage devices. They were fabricated by heat treatment (HT) of 37.5Li₂O–25V₂O₅–37.5P₂O₅?mol% glass at 450 °C for different times in the air. XRD, SEM, and electrochemical methods were used to study the effect of HT time on the nanostructure and electrochemical performance for Li₃V₂(PO₄)₃ glass-ceramic nanocomposites electrodes. XRD patterns showed forming Li₃V₂(PO₄)₃ NASICON type with monoclinic structure. The crystalline sizes were found to be in the range of 32–56 nm. SEM morphologies exhibited non-uniform grains and changed with variation of HT time. The electrochemical performance of Li₃V₂(PO₄)₃ glass-ceramic nanocomposites was investigated by using galvanostatic charge/discharge methods, cyclic voltammetry, and electrochemical impedance spectroscopy in 1 M H₂SO₄ aqueous electrolyte. The glass-ceramic nanocomposites annealed for 4 h, which had a lower crystalline size, exhibited the best electrochemical performance with a specific capacity of 116.4 F g^?1 at 0.5 A g^?1. Small crystalline size supported the lithium ion mobility in the electrode by decreasing the ion diffusion pathway. Therefore, the Li₃V₂(PO₄)₃ glass-ceramic nanocomposites can be promising candidates for large-scale industrial applications in high-performance energy storage devices.     

Sucrose assisted hydrothermal synthesis of SnO2/graphene nanocomposites with improved lithium storage properties

SnO₂/graphene nanocomposites are synthesized by a new hydrothermal treatment strategy under the assistance of sucrose. From the images of the scanning electron microscope (SEM) and transmission electron microscope (TEM), it can be observed that SnO₂ nanoparticles with the size of 4~5 nm uniformly distribute on the graphene nanosheets. The result demonstrates that sucrose can effectively prevent graphene nanosheets from restacking during hydrothermal treatment and subsequently treatment. The charging/discharging test result indicates that the SnO₂/graphene nanocomposites exhibit high specific capacity and excellent cycleability. The first reversible specific capacity is 729 mAh.g^?1 at the current density of 50 mA.g^?1, and remains 646 mAh.g^?1 after 30 cycles at the current density of 100 mA.g^?1, 30 cycles at the current density of 200 mA.g^?1, 30 cycles at the current density of 400 mA.g^?1, 30 cycles at the current density of 800 mA.g^?1, and 30 cycles at the current density of 50 mA.g^?1.     

Tin oxide-titanium oxide/graphene composited as anode materials for lithium-ion batteries

A tin oxide-titanium oxide/graphene (SnO₂-TiO₂/G) ternary nanocomposite as high-performance anode for Li-ion batteries was prepared via a simple reflux method. The graphite oxide (GO) was reduced to graphene nanosheet, and the SnO₂-TiO₂ nanocomposites were evenly distributed on the graphene matrix in the SnO₂-TiO₂/G nanocomposite. The as-prepared SnO₂-TiO₂/G nanocomposites were employed as anode materials for lithium-ion batteries, showing an outstanding performance with high reversible capacity and long cycle life. The composite delivered a superior initial discharge capacity of 1,594.6 mAh g^?1 and a reversible specific capacity of 1,500.3 mAh g^?1 at a current density of 100 mA g^?1. After 100 cycles, the reversible discharge capacity was still maintained at 1,177.4 mAh g^?1 at a current density of 100 mA g^?1 with a high retained rate of reversible capacity of 73.8 %. The addition of small amount of TiO₂ nanoparticles improved the cycling stability and specific capacity of SnO₂-TiO₂/G nanocomposite, obviously. The results demonstrate that the SnO₂-TiO₂/G nanocomposite is a promising alternative anode material for practical Li-ion batteries.     

Synthesis and Characterization of High Surface Area Tin Oxide Nanoparticles via the Sol‐Gel Method as a Catalyst for the Hydrogenation of Styrene

A systematic study on the preparation of SnO₂ nanoparticles using a simple sol‐gel technique has been conducted by varying reaction parameters such as concentration of ammonia, ammonia feed rate and reaction temperature. The tin oxide obtained was characterized by using FTIR, BET, XRD and TEM. Particles size was obtained in the range of 4 to 5.6 nm and the surface area was found to be between 76 to 114 m² g^?1 depending on the reaction parameters. Meanwhile, the catalytic activity of SnO2 was first time investigated for the hydrogenation reaction of styrene using ethanol as the solvent at 70 °C and 1 atmospheric pressure. It is found that SnO2 acts as a good catalyst in this hydrogenation process. The product conversions in the presence of catalysts prepared at different conditions were between 37 to 72%.     

Synthesis of NiO/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposites as substrate for the construction of electrochemical biosensors

The exploration of substrate materials to construct electrochemical biosensors for glucose monitoring in the field of clinical diagnosis, especially for diabetes is still being investigated extensively. In this paper, NiO/Fe₂O₃ nanocomposites are designed and synthesized by two-step hydrothermal approach in combination with calcinations. The morphology and microstructure are studied by SEM, XRD, XPS, and TEM systematically. Optimized NiO/Fe₂O₃ nanocomposites are employed as substrate to construct glucose biosensors, and the electrochemical properties are carried out by cyclic voltammetric and chronoamperometric techniques. The results indicate as-prepared biosensors achieve a high sensitivity of 230.5 μA cm^?2 mM^?1, wide linear range between 50 and 2867 μM, and low detection limit of 3.9 μM towards glucose detection. The synergistic effect between NiO and Fe₂O₃ as substrate to construct glucose biosensors is elucidated. The selectivity is acceptable based on the detection of glucose concentration for diabetics.     

High visible light-driven photocatalytic activity of large surface area Cu doped SnO<Subscript>2</Subscript> nanorods synthesized by novel one-step microwave irradiation method

The paper investigates the structural, optical and photocatalytic activity of large surface area single crystalline copper (Cu) doped SnO₂ nanorods (NRs) synthesized by a novel one-step microwave irradiation method. Powder X-ray diffraction (XRD) analysis confirms that both pure and Cu doped SnO₂ are tetragonal rutile type structure (space group P42/mnm) formed during the microwave process within 10 min without any post annealing treatment. Transmission electron microscopy (TEM) reveals that the as synthesized Cu doped SnO₂ samples exhibited rod-like shape and the length was less than 80 nm and diameter was about few nanometers. Typical selected-area electron diffraction (SAED) pattern indicates that, the growth direction of Cu–SnO₂ nanorod is along [110] direction. The variety of phonon interaction in the pure and Cu doped SnO₂ is observed by Raman spectroscopy. Electron paramagnetic resonance and X-ray photoelectron spectroscopy (XPS) confirms that the presence of copper and tin as Cu²⁺ and Sn⁴⁺ in state, respectively. The photocatalytic activity was monitored via the degradation of methylene blue (MB) and Rhodamine B (RhB) dyes and the Cu–SnO₂ showed better photocatalytic activity than that of pure SnO₂. This could be attributed to the effective electron–hole separation by surface modification.     

Biosynthesis and Photocatalytic Properties of SnO<Subscript>2</Subscript> Nanoparticles Prepared Using Aqueous Extract of Cauliflower

This work reports the biosynthesis of Sn(OH)₂ using aqueous extract of fresh cauliflower (Brassica oleracea L. var. botrytis), and the subsequent preparation of SnO₂ nanoparticles at two different annealing temperatures of 300 and 450 °C for 2 h. The obtained SnO₂ nanoparticles were denoted as S1 and S2 for the samples prepared at 300 and 450 °C, respectively. XRD analysis identified rutile tetragonal phase of SnO₂ nanoparticles and TEM results gave a quasispherical and spherical morphologies for S1 and S2 respectively of the size range 3.62–6.34 nm. The optical properties were studied with UV–vis and photoluminescence (PL) spectroscopies, and the nanoparticles showed blue shift in their absorption edges. The observed emission peak in the PL spectra found around 419 nm is attributable to oxygen vacancies and defects. Photocatalytic activities of the nanoparticles (S1 and S2) were studied using methylene blue (MB) under ultraviolet light irradiation and the results reveal 91.89 and 88.23% degradation efficiency of MB by S1 and S2 respectively over a period of 180 min.     

A selective and sensitive sensor based on highly dispersed cobalt porphyrin-Co<Subscript>3</Subscript>O<Subscript>4</Subscript>-graphene oxide nanocomposites for the detection of methyl parathion

A new type of graphene-Co₃O₄ functionalized porphyrin was synthesized and used for selective and sensitive detection of methyl parathion (MP). Co₃O₄ nanoparticles were firstly modified onto graphene oxide sheets and the porphyrin/Co₃O₄/graphene nanocomposites were then synthesized by self-assembly decoration of anion porphyrin on Co₃O₄-modified graphene sheets by π–π stacking. By dexterously controlling the electrochemical reduction variables and optimizing the electrode preparation parameters, with the satisfactory conductivity, strong adsorption toward MP, the developed novel sensor fabricated with the as-synthesized nano-assembly for determination of MP shows some satisfactory properties such as a wide linear concentration range (from 4.0?×?10^?7 M to 2.0?×?10^?5 M), low detection limit (1.1?×?10^?8 M), favorable repeatability, long-time storage stability, and satisfactory anti-interference ability. It also had high precision for the real sample analysis, which indicated the good perspective for field application.     

Enhanced electrochemical performance of LiFePO<Subscript>4</Subscript>/C nanocomposites due to in situ formation of Fe<Subscript>2</Subscript>P impurities

We have studied LiFePO₄/C nanocomposites prepared by sol-gel method using lauric acid as a surfactant and calcined at different temperatures between 600 and 900 °C. In addition to the major LiFePO₄ phase, all the samples show a varying amount of in situ Fe₂P impurity phase characterized by x-ray diffraction, magnetic measurements, and Mössbauer spectroscopy. The amount of Fe₂P impurity phase increases with increasing calcination temperature. Of all the samples studied, the LiFePO₄/C sample calcined at 700 °C which contains ～15 wt% Fe₂P shows the least charge transfer resistance and a better electrochemical performance with a discharge capacity of 136 mA h g^?1 at a rate of 1 C, 121 mA h g^?1 at 10 C (～70 % of the theoretical capacity of LiFePO₄), and excellent cycleability. Although further increase in the amount of Fe₂P reduces the overall capacity, frequency-dependent Warburg impedance analyses show that all samples calcined at temperatures ≥700 °C have an order of magnitude higher Li⁺ diffusion coefficient (～1.3?×?10^?13 cm² s^?1) compared to the one calcined at 600 °C, as well as the values reported in literature. This work suggests that controlling the reduction environment and the temperature during the synthesis process can be used to optimize the amount of conducting Fe₂P for obtaining the best capacity for the high power batteries.     

Preparation of polypropylene/clay nanocomposites by <Emphasis Type="Italic">in situ</Emphasis> polymerization with TiCl<Subscript>4</Subscript>/MgCl<Subscript>2</Subscript>/clay compound catalyst

TiCl₄/MgCl₂/clay compound catalyst was prepared by chemical reaction.Exfoliated polypropylene（PP）/clay nanocomposites were synthesized by in situ polymerization with this compound catalyst.Effects of polymerization temperature,polymerization time,propylene pressure,solvent consumption and pre-treat time of catalyst on catalyst activity and catalytic stereospecificity were studied.Under optimal conditions,activity of the nano-compound catalyst is about 88.3 kg/（mol Ti·h）.Isotacticity of PP obtained in the nanocomposites is in the range of 89%-99%,and its melting temperature is about 159℃.The weight-average molecular weight of PP can reach 6.7×10⁵ - 7.8×10⁵,and the molecular weight distribution is between 7.7 and 7.9.     

An electrochemical sensor for sensitive determination of nitrites based on Ag-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-graphene oxide magnetic nanocomposites

A functional Ag-Fe₃O₄-grapheme oxide magnetic nanocomposite was synthesized and used to prepare a nitrite sensor. Morphology and composition of the nanocomposites were characterized by a transmission electron microscope, UV-VIS spectroscopy, X-ray diffraction, and Fourier transform infrared spectra. Electrochemical investigation indicated that the nanocomposites possess excellent electrochemical oxidation ability towards nitrites. The sensor exhibited two linear ranges: one from 0.5 µM to 0.72 mM with a correlation coefficient of 0.996 and sensitivity of 1996 µA mM^?1 cm^?2; the other from 0.72 mM to 8.15 mM with a correlation coefficient of 0.998 and sensitivity of 426 µAmM^?1 cm^?2. The limit of detection of this sensing system was 0.17 µM at the signal-to-noise ratio of 3. Additionally, the sensor exhibited long-term stability, good reproducibility, and anti-interference.     

Ni<Subscript>0.37</Subscript>Co<Subscript>0.63</Subscript>S<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for highly efficient electrocatalytic oxygen evolution and photocatalytic pollutant degradation

A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents (NCS@rGO-x) has been successfully prepared via a facile one-step hydrothermal method and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The XRD and FESEM analyses revealed that the phase structure and morphology of NCS nanoparticles were substantially influenced by the graphene contents. The phase structure of NCS nanoparticles gradually transformed from primary NiCo₂S₄ to Ni_0.37Co_0.63S₂ and the morphology and size of NCS nanoparticles were found to become more regular and homogeneous with the increase of graphene concentration. On the NCS@rGO-x nanocomposites, the NCS@rGO-2 sample demonstrated the best catalytic activity toward the OER, which delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. Furthermore, the NCS@rGO-2 sample showed the remarkable photocatalytic activity for degradation of methylene blue (MB), which may be attributed to the increased reaction sites and high separation efficiency of photogenerated charge carries due to the electronic interaction between NCS nanoparticles and rGO. All these impressive performances indicate that the NCS@rGO-2 nanocomposite is a promising catalyst in energy and environmental fields.

Open image in new window

Graphical abstract A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents has been successfully prepared and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The NCS@rGO-2 catalyst-modified stainless steel wire mesh (SSWM) electrode delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. At the same time, the NCS@rGO-2 catalyst is also first investigated as an efficient photocatalyst for degradation of MB.

     

Effect of molten salt synthesis temperature on TiO<Subscript>2</Subscript> and Li cycling properties

In this project, we synthesized TiO₂ compounds through the molten salt method (MSM) using Ti(IV) oxysulfate, as the Ti source. Molten salts in the ratio of 0.375 M LiNO₃:0.180 M NaNO₃:0.445 M KNO₃ were added and heated at temperatures of 145, 280, 380, and 480 °C for 2 h in air, respectively. A part of the sample prepared at 145 °C was further reheated to 850 °C for 2 h in air. X-ray diffraction studies showed that the amorphous phase was obtained when the sample was prepared at 145 °C, and polycrystalline to crystalline anatase phase was formed when heated from 280 to 850 °C, which is complementary to the results of selected area electron diffraction studies. Electrochemical properties were studied using galvanostatic cycling, cyclic voltammetry, and electrochemical impedance spectroscopy at a current density of 33 mA g^?1 (0.1 C rate) and a scan rate of 0.058 mV s^?1, in the voltage range 1.0–2.8 V vs. Li. Electrochemical cycling profiles for the amorphous TiO₂ samples prepared at 145 °C showed single-phase reaction with a low reversible capacity of 65 mAh g^?1, whereas compounds prepared at 280 °C and above showed a two-phase reaction of Li-poor and Li-rich regions with a reversible capacity of 200 mAh g^?1. TiO₂ produced at 280 °C showed the lowest capacity fading and the lowest impedance value among the investigated samples.     

Flower-like SnO2 nanoparticles grown on graphene as anode materials for lithium-ion batteries

Tin oxide (SnO₂)/graphene composite was synthesized from SnCl₂?·?2H₂O and graphene oxide (GO) by a wet chemical-hydrothermal route. The GO was reduced to graphene nanosheet (GNS) and flower-like SnO₂ nano-crystals with size about 40 nm were homogeneously distributed on the surface of GNS. The SnO₂/graphene composites delivered a superior first discharge capacity of 1941.9 mAhg^?1 with a reversible capacity of 901.7 mAhg^?1 at the current density of 100 mAg^?1. Moreover, even at higher densities of 200 and 500 mAg^?1, the SnO₂/graphene composite still maintained enhanced cycling stability. After 40 cycles, the discharge capacity was still maintained at 691.1 mAhg^?1 at the current density of 100 mAg^?1. The SnO₂/graphene composite displayed an outstanding Li-battery performance with large reversible capacity and enhanced rate performance, which can be attributed to the highly uniform distribution of SnO₂ nanoparticles and high reduction degree of graphene. This result strongly indicates that the SnO₂/graphene composite was a promising anode material in high-performance lithium-ion batteries.     

In situ crystalline investigation of sol–gel deposited barium stannate (Ba<Subscript>x</Subscript>SnO<Subscript>2+y</Subscript>; x:y ≈ 1:1) nanoparticles in alkaline medium

Fine layers of barium stannate nanoparticles have been synthesized by sol–gel technique with tin chloride pentahydrate (SnCl₄·5H₂O) and barium sulphate (BaSO₄). Physico-chemical properties of barium stannate, Ba_xSnO_2+y; x:y ≈ 1:1 were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and UV–Visible spectrophotometry technique. A growth mechanism based on the combination of particle sticking and molecule level heterogeneous growth is proposed. It has been found that the particle size of all the samples was distributed in the range 3.0–6.5 ? while optical absorption spectrum indicates that Ba_xSnO_2+y nanoparticles have a direct band gap of 3.9 eV.     

Comparing the electrochemical properties of pure phase Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript> and composite Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript>/C

Compound Zn₂SnO₄ was synthesized by a hydrothermal method in which SnCl₄ · 5H₂O, ZnCl₂ and N₂H₄ · H₂O were used as reactants. Composite Zn₂SnO₄/C was then synthesized through a carbothermic reduction process using the as-prepared Zn₂SnO₄ and glucose as reactants. Comparing to the pure Zn₂SnO₄, some improved electrochemical properties were obtained for composite Zn₂SnO₄/C. When doped with 15% glucose, the composite Zn₂SnO₄/C showed the best electrochemical performance. Its first discharge capacity was about 1500 mA h g⁻¹, with a capacity retain of 500 mA h g⁻¹ in the 40th cycle at a constant current density of 100 mA/g in the voltage range of 0.05–3.0 V. There were also some differences displayed in their cyclic voltammogram.     

Mn<Subscript>3</Subscript>O<Subscript>4</Subscript>/carbon nanotubes nanocomposites as improved anode materials for lithium-ion batteries

Mn₃O₄ and Mn₃O₄ (140)/CNTs have been investigated as high-capacity anode materials for lithium-ion batteries (LIBs) applications. Nanoparticle Mn₃O₄ samples were synthesized by hydrothermal method using Mn(Ac)₂ and NH₃·H₂O as the raw materials and characterized by XRD, TG, EA, TEM, and SEM. Its electrochemical performances, as anode materials, were evaluated by galvanostatic discharge-charge tests. The Mn₃O₄ (140)/CNTs displays outstanding electrochemical performances, such as high initial capacity (1942 mAh g^?1), stable cycling performance (1088 mAh g^?1 and coulombic efficiency remain at 97% after 60 cycles) and great rate performance (recover 823 mAh g^?1 when return to initial current density after 44 cycles). Compared to pure Mn₃O₄ (140), the improving electrochemical performances can be attributed to the existence of very conductive CNTs. The Mn₃O₄ (140)/CNTs with excellent electrochemical properties might find applications as highly effective materials in electromagnetism, catalysis, microelectronic devices, etc. The process should also offer an effective and facile method to fabricate many other nanosized metallic oxide/CNTs nanocomposites for low-cost, high-capacity, and environmentally benign materials for LIBs.