Analysis of Spectinomycin by HPLC with Evaporative Light-Scattering Detection

A high-performance liquid chromatographic method with evaporative light-scattering detection (ELSD) has been developed for analysis of spectinomycin and related impurities. Separation of spectinomycin from structurally related impurities was achieved on a C₁₈ column. The optimized mobile phase was 25 mmol L⁻¹ ammonium acetate (pH 7.5)-methanol, 90:10 (v/v), at a flow rate of 0.6 mL min⁻¹. The temperature of the drift tube of the ELSD was 95°C and the flow rate of carrier gas was 2.2 L min⁻¹. The accuracy, specificity, precision, linearity, sensitivity, and robustness of the method were validated in accordance with ICH guidelines. In addition to determination of spectinomycin and related impurities, the method is also ideal for determination of the salts spectinomycin hydrochloride and spectinomycin sulfate.     

万古霉素及其杂质的亲水作用色谱分析

目前,万古霉素色谱分析方法主要为反相色谱法,该法分离万古霉素及其杂质时,存在极性选择性不足以及所使用的流动相体系与质谱兼容性差等问题。基于亲水作用色谱(HILIC)对糖肽类物质的色谱保留和极性选择性,本文选取万古霉素及其常见杂质为对象,考察了HILIC固定相、流动相组成比例、缓冲盐添加剂浓度和pH值等色谱条件,对万古霉素及其主要杂质进行了HILIC分离方法研究。确立了以Click XIon色谱柱为固定相,以甲酸铵为流动相添加剂的亲水作用色谱条件,实现了万古霉素及主要杂质的分离,为万古霉素类化合物的分离提供了新的途径。     

Neutron activation analysis of rare earth impurities in metallic uranium

A method with a sensitivity of 2·10⁻⁷ to 1·10⁻¹⁰% has been developed for determining Yb, Ho, Dy, Gd, Eu, Sm and La impurities in metallic uranium by means of neutron activation. The method is based on a preliminary chromatographic separation of the total amount of rare earth elements from uranium by passing the solution in sulphuric acid through KU-2 cation exchange resin and eluting the traces of uranium retained by the resin with a solution of ascorbic acid. The rare earth impurities are then eluted from the resin with 4–5N HCl, evaporated, and irradiated for 20 hours with a neutron flux of 1.2·10¹³ n·cm⁻²·sec⁻¹. Subsequently the traces of the rare earth elements are co-precipitated with Fe(OH)₃, dissolved in concentrated HCl and separated from the iron and other impurities by passing the solution through Dowex 1X8 anion exchange resin in the chloride form. The individual rare earth elements are then separated from each other using KU-2 cation exchange resin and a solution of ammonium α-hydroxyisobutyrate as the eluant.     

RP-HPLC determination of midecamycin and related impurities

Summary A method has been developed for separation and quantitation of midecamycin A₁ and related impurities by high-performance liquid chromatography with evaporative light-scattering detection (ELSD). Chromatographic conditions included use of a Diamonsil C₁₈ column; the mobile phase was 52:48 acetonitrile −0.2 mol L⁻¹ ammonium formate solution (adjusted to pH 7.3 with triethylamine) at a flow rate of 1 mL min⁻¹. The column temperature was 35°C, the shift tube temperature of the ELSD was 105°C, and the gas flow rate of the ELSD was 3.0 L min⁻¹. The response factors of midecamycins in HPLC-ELSD were the same; the linear equation wasy=599292.44x+2868618.04,r=0.9979, the linear range was 5–80 μg,RSD=0.21–1.54%, and theLOD andLOQ were 0.36 and 1.2 μg, respectively. The method was simple, quick, and precise and could be used to determine midecamycin and its related impurities directly.     

Plasma lipid analysis by hydrophilic interaction liquid chromatography coupled with electrospray ionization tandem mass spectrometry

A novel method for the analysis of endogenous lipids and related compounds was developed employing hydrophilic interaction liquid chromatography with electrospray ionization tandem mass spectrometry. A hydrophilic interaction liquid chromatography with carbamoyl stationary phase achieved clear separation of phosphatidylcholine, lysophosphatidylcholine, sphingomyelin, ceramide, and mono‐hexsosyl ceramide groups with good peak area repeatability (RSD% < 10) and linearity (R² > 0.99). The established method was applied to human plasma assays and a total of 117 endogenous lipids were successfully detected and reproducibly identified. In addition, we investigated the simultaneous detection of small polar metabolites such as amino and organic acids co‐existing in the same biological samples processed in a single analytical run with lipids. Our results show that hydrophilic interaction liquid chromatography is a useful tool for human plasma lipidome analysis and offers more comprehensive metabolome coverage.     

Validated hydrophilic interaction LC-MS/MS method for determination of 2-pyrrolidinone residue: applied to a depletion study of 2-pyrrolidinone in swine liver

A hydrophilic interaction high-performance liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) method for determination of 2-pyrrolidinone in swine liver was developed and validated. After the fortification of 2-pyrrolidinone-d₆ as the internal standard, 2-pyrrolidinone in swine liver was extracted by acetonitrile, and the supernatant was led through a C18 + WAX mixed-mode solid phase extraction (SPE) cartridge. Furthermore, the eluate was adjusted to pH 5.0 and then led through a strong cationic exchange SPE cartridge. 2-Pyrrolidinone and 2-pyrrolidinone-d₆ were concentrated and eluted by acetonitrile containing 2% ammonium hydroxide. The final eluate was acidified and then injected for hydrophilic interaction LC-MS/MS analysis. Mass spectrometry detection was carried using positive turbo-ion spray ionization mode. The multiple reaction monitoring transitions were 86 → 69 for 2-pyrrolidinone and 92 → 75 for 2-pyrrolidinone-d₆. The C18 + WAX mixed-mode SPE cleanup greatly prevented the rapid contamination of mass spectrometer. The further SCX SPE cleanup thoroughly eliminated the absolute matrix effect. Solvent calibration standards could be readily used for quantitative analysis of 2-pyrrolidinone with excellent precision and accuracy. Endogenous levels of 2-pyrrolidinone in some blank matrices was readily determined. Full recoveries were readily achieved by the optimize extraction protocol, and thus the role of 2-pyrrolidinone-d₆ was to just compensate the variation of the injections. The detection limit was 5 ng g⁻¹ swine liver. The validated method was applied to a depletion study of 2-pyrrolidinone in swine liver following intramuscular administration of a drug 2-pyrrolidinone formulation. The matrix effect from tissue samples usually represented a technical challenge for LC-MS/MS analysis, and a very small molecule such as 2-pyrrolidinone also represented a technical barrier for LC-MS/MS analysis. However, the extraction protocol developed in the present study reached the best outcome: zero matrix effect and full recovery.     

A Validated Stability Indicating RPLC Method for Tazarotene

A simple, isocratic, rapid and accurate reversed phase high performance liquid chromatography method was developed for the quantitative determination of tazarotene. The developed method is also applicable for the related substance determination in bulk drugs. The chromatographic separation was achieved on a Hypersil C18 (250 mm × 4.6 mm 5 μm) column using water pH 2.5 with orthophosphoric acid:acetonitrile (15:85, v/v) as a mobile phase. The chromatographic resolutions between tazarotene and its potential impurity A and B were found greater than three. The limit of detection and limit of quantification of impurities were found to be 25 and 75 ng mL⁻¹. The percentage recovery of impurities in bulk drug sample was ranged from 96.8 to 103.5.The percentage recovery of tazarotene in bulk drug sample was ranged from 98.4 to 100.9. The developed RPLC method was validated with respect to linearity, accuracy, precision and robustness.     

Development and validation of an improved liquid chromatographic method for the analysis of oxytetracycline

Summary An improved LC method is described for the separation of oxytetracycline and its impurities. The separation is much better than that obtained with official pharmacopoeia methods. The method uses XTerra RP-18, 5 μm (25cm×4.6 mm I.D.), a silica-based stationary phase with methyl end-capping, claimed to reduce silanol activity. The column temperature is set at 30°C and a UV detection is performed at 280 nm. Mobile phase containing acetonitrile −0.25 M tetrabutylammonium hydrogen sulfate pH 7.5−0.25 M ethylenediaminetetraacetic acid pH 7.5-water (115:360:160:365,v/v/v/v) is used at a flow rate of 1.0 mL.min⁻¹, to separate the impurities present in oxytetracycline base. A central composite experimental design is used to optimize the separation. A second isocratic method with higher content of acetonitrile is needed to separate the more retained impurities present only in oxytetracycline hydrochloride. The method is robust and shows good selectivity, repeatability, linearity and sensitivity.     

Trace analysis of impurities in sol-gel prepared BaTiO3-powders with ICP-MS

An ICP-MS method for the determination of ultra-trace impurities of 21 elements (Be, Al, Ca, Cr, Mn, Co, Ni, Sr, Zr, Ag Cd, In, Sn, La, Ce, Er, Hf, W, Pb, Bi, U) at pg/g to ng/g level in BaTiO₃-powders and precursors prepared by different sol-gel-methods was developed. The non-spectral matrix effects like suppression of the analyte signal and spectral effects like the formation of polyatomic ions like MO⁺, MAr⁺, MCl⁺ and M²⁺ which interfere with isotopes in isobar overlaps was investigated. To correct for these polyatomic ions a “blank solution” with the composition of the sample matrix was measured and the data were subtracted from the results of the sample; a standard addition method for calibration and ⁴⁵Sc, ⁸⁹Y, ¹⁰³Rh and ¹⁴¹Pr as internal standards to compensate the matrix effects were used and improvements in accuracy and precision were shown. The stability of the instrument and the detection limits in the presence of the barium and titanium matrix were established. In BaTiO₃ different amounts of trace impurities were detected in the μg/g to ng/g range. The main impurities are strontium and calcium. The source of the impurities are mainly the educts but it is shown that contamination during the synthesis process is also possible. Received: 1 December 1998 / Revised: 12 February 1999 / Accepted: 18 February 1999     

A hydrophilic interaction ultraperformance liquid chromatography (HILIC–UPLC) method for genomic DNA methylation assessment by UV detection

A hydrophilic interaction chromatography-based method, in combination with 1.7 μm ethylene bridged hybrid particle packed column (100 mm × 2.1 mm I.D.) and ultraperformance liquid chromatography, has been developed to measure cytosine (C) and methylcytosine (mC) in order to evaluate the extent of DNA methylation. Separation of cytosine and methylcytosine was achieved with good resolution and in fairly short times (5.5 min) by using isocratic elution with a mixture of 97:3 (v/v) acetonitrile/10 mM ammonium acetate as a mobile phase. The determination coefficients of C and mC were high (R ² > 0.999) within the range tested. The %RSD for intraday and interday were respectively 2.2% and 2.5% for C and 3.5% and 3.8% for mC. The limit of detection was 0.52 μM (0.52 fmol on-column) both for C and mC while the limit of quantification was 1.72 μM (1.72 fmol on-column) both for C and mC. The smallest amount of purified DNA that yielded a measurable level of C and mC was 10 μg. On the whole, this method is simple, rapid, sensitive, and precise.     

Determination of inorganic impurities in PVC latex by activation analysis

Experimental work was carried out in order to determine inorganic impurities in PVC latex by activation analysis. Arsenic and bromine were detected and quantitatively determined by means of two alternative methods: (a) comparison of the samples and As₂O₃ and KBr standard simultaneously irradiated with slow neutrons; (b) the same as (a), but considering only bromine and using standards made by adding and homogenizing known amounts of KBr in the PVC latex. All measurements were based on γ-spectrometry. The mean values given by method (a) are: arsenic (2.5±0.4)·10⁻⁴%, bromine (1.9±0.1)·10⁻³%. In method (b) the bromine found was (2.47±0.03)·10⁻³%.     

Selective ion exchange separation of uranium from concomitant impurities in uranium materials and subsequent determination of the impurities by ICP-OES

An ion exchange method has been developed for the separation of uranium from trace level metallic impurities prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES) in uranium materials. Selective separation of uranium from trace level metallic impurities consisting Cr, Co, Cu, Fe, Mn, Cd, Gd, Dy, Ni, and Ca was achieved on anion exchange resin Dowex 1 × 8 in sulphate medium. The resin (100–200 mesh, in chloride form) was packed in a small Teflon column (7.8 cm × 0.8 cm I.D.) and brought into sulphate form by passing 0.2 N ammonium sulphate solution. Optimum experimental conditions including pH and concentration of sulphate in the liquid phase were investigated for the effective uptake of uranium by the column. Uranium was selectively retained on the column as anionic complex with sulphate, while impurities were passed through the column. Post column solution was collected and analyzed by ICP-OES for the determination of metallic impurities. Up to 2,500 μg/mL of uranium was retained with >99% efficiency after passing 25 mL sample through the column at pH 3. Percentage recoveries obtained for most of the metallic impurities were >95% with relative standard deviations <5%. The method established was applied for the determination of gadolinium in urania–gadolinia (UO₂–Gd₂O₃) ceramic nuclear fuel and excellent results were achieved. Solvent extraction method using tributylphosphate (TBP) as extractant was also applied for the separation of uranium in urania–gadolinia nuclear fuel samples prior to the determination of gadolinium by ICP-OES. The results obtained with the present method were found very comparable with those of the solvent extraction method.     

Silver atoms in the structural channels of beryl

A silver atom in synthetic beryl is investigated by the EPR and electron spin echo (ESE) spectroscopy. It is established that silver ions were first introduced into the structural channels of beryl by thermodiffusion at 800υC. The Ag⁺ ions are then converted to the Agυ state by the X-ray irradiation of samples at room temperature. Charge changes in manganese and chromium impurities located at the aluminum positions are observed at the same conditions. Four different Agυ centers with isotropic hyperfine interactions (HFI) with ¹⁰⁷ Ag and ¹⁰⁹ Ag nuclei and hyperfine constants less than those for the free Ag atom are revealed by the EPR method. ESE investigations enable us to confirm the positions of silver atoms that are stable up to 230υC.     

A simple linear sweep voltammetric method for the determination of double-stranded DNA with malachite green

In pH 3.5 Britton—Robinson buffer solution double-stranded (ds) DNA can react with malachite green (MG) to form an interaction complex, which resulted in the decrease of the electrochemical response of MG, MG had a well-defined second-order derivative linear sweep voltammetric peak at −0.73 V (vs. SCE). After the addition of dsDNA into MG solution, the reductive peak current decreased with the positive shift of peak potential, which was the typical characteristic of intercalation. Based on the interaction, an indirect electrochemical determination method for dsDNA was established. The optimum conditions for the reaction were investigated and there were little or no interferences from the commonly coexisting substances. The decrease of peak current was linear with the concentration of dsDNA over the range of 0.8–12.0 μg cm⁻³ with the linear regression equation as ΔI _p″/nA = 91.70 C/(μg cm⁻³) + 74.55 (n = 10, γ = 0.990). The detection limit was calculated as 0.46 μg cm⁻³ (3σ). The method had high sensitivity and was further applied to the dsDNA synthetic samples with satisfactory result. The interaction mechanism was discussed with the intercalation of DNA-MG to form a supramolecular complex and the stoichiometry of the supramolecular complex was calculated by electrochemical method with the binding number 3 and the binding constant 2.35 × 10¹⁵ (mol dm⁻³)⁻³.     

Hydrophilic magnetic polymer latexes. 1. Adsorption of magnetic iron oxide nanoparticles onto various cationic latexes

With a view to preparing monosized hydrophilic functional magnetic latex particles based on a two-step strategy using anionic iron oxide and cationic polymer latexes, the adsorption step was systematically investigated for a better control of the subsequent encapsulation step. The iron oxide nanoparticles were first obtained according to the classical precipitation method of ferric and ferrous chloride salt using a concentrated sodium hydroxide solution, whereas the polystyrene (PS), P(S/N-isopropylacrylamide (NIPAM)) core–shell and PNIPAM latexes were produced via emulsion and precipitation polymerizations, respectively. The polymer and inorganic colloids were then characterised. The adsorption of iron oxide nanoparticles onto the three types of polymer latexes via electrostatic interaction was studied as a function of iron oxide particle concentration, charge density and the cross-linking density of the hydrophilic layer. The maximum amounts of magnetic nanoparticles adsorbed onto the various latexes were found to increase in the following order: PS < P(S/NIPAM) < P(NIPAM). This significant difference is discussed by taking into account the charge distribution in the hydrogel layer and diffusion phenomena inside the cross-linked hydrophilic shell. Received: 28 December 1998 Accepted in revised form: 15 April 1999     

Determination of impurities in high-purity carbon tetrachloride by gas chromatography-mass spectrometry

The impurities in high-purity carbon tetrachloride (CCl ₄ ) were determined by gas chromatography-mass spectrometry (GC-MS). The use of chromatography of near-saturated vapors allowed the injection of samples up to 1 μL into a capillary column and to achieve specific column efficiency in an isothermal mode of 221,000 t.p./m. The detection limits for impurities were 1 × 10⁻¹ to 1 × 10⁻⁸ wt %.     

Trace impurities in Canadian oil-sands,coals and petroleum products and their fate during extraction,up-grading and combustion

National energy programs for the next two decades entail increased total consumption of fossil fuels in general and, in particular of portable fuels extracted from oil sands and shales and from lower quality coals. Improved fuel-upgrading and combustion technologies are recognized to be vital for minimizing environmental degradation caused by continental and global acid-rain precipitation from fossil-fuel impurities. A further consideration, however, is the fate of those trace-element co-contaminants of acid-rain such as heavy metals, which are present at lower concentrations (10⁻⁴–10⁻⁷) but may also be of environmental significance when 10⁷ to 10⁹ tons·y⁻¹ are utilized on several continents. In this laboratory, INAA procedures have been adapted for the determination of 25–30 trace impurities in a variety of fuels and extracts including: S, V and Al, As, Ba, Br, Ca, Ce, Cl, Co, Cr, Dy, Eu, Fe, Hf, K, La, Mn, Na, Rb, Sb, Sc, Sm, Th, Ti, U. Samples were obtained of typical Canadian pumped crudes, and from several Canadian oil-sands and coal deposits (mostly bituminous and subbituminous) both in their natural states and after stages of extraction and upgrading. Also analyzed were fuels derived from them and the residues resulting from their refining and combustion. InAA of all fossil fuel extracts including light oils, viscous bitumen and such organic fluids could be performed under the same conditions as the parent substances: crude oils, oil-sands and coals, without any special sample preparation. Although no standard samples are routinely required because of the 1–2% long-term flux stability of the reactor, accuracy checks were performed periodically by reference to NBS-1632A standard coal and atomic absorption standard dilute solutions. Results obtained for the NBS coal SRM and the BAM flyash sample (1978) are also given. A wide range of trace impurities determined in the Canadian fossil fuels included some of those which are of particular significance in Canadian coals and their ashes (a STM standard ashing method). The ‘inorganic’ traces can also be grouped according to their fate during static combustion at 750°C. The research reported here was supported with funds from a Natural Sciences and Engineering Research Council of Canada Strategic energy grant (G 0017), 1978–80, “Trace Contaminants of Environmental Importance in Present and Future Fossil Fuels”.     

Preparation of phosphorylcholine‐based hydrophilic monolithic column and application for analysis of drug‐related impurities with capillary electrochromatography

A hydrophilic monolithic CEC column was prepared by thermal copolymerization of zwitterionic monomer 2‐methacryloyloxyethyl phosphorylcholine (MPC), pentaerythritol triacrylate (PETA), either methacrylatoethyl trimethyl ammonium chloride (META) or sodium 2‐methylpropene‐1‐sulfonate (MPS) in a polar binary porogen consisting of methanol and THF. A typical hydrophilic interaction LC retention mechanism was observed for low‐molecular weight polar compounds including amides, nucleotides, and nucleosides in the separation mode of hydrophilic interaction CEC, when high content of ACN (>60%) was used as the mobile phase. The effect of the electrostatic interaction between the analytes and the stationary phase was found to be negligible. The poly(MPC‐co‐PETA‐co‐META or MPS) monolithic columns have an average column efficiency of 40 000 plates/m and displayed with a satisfactory repeatability in terms of migration time and peak areas. Finally, the column was successfully applied to determine the impurities of a positively charged drug pramipexole which are often separated by ion pair RP chromatography due to their high hydrophilicity. All four components can be baseline separated within 5 min with BGE consisting of ACN/20 mM ammonium formate buffer (pH 3.0; 80/20).     

Separation of trace heavy metals from silver matrix by solid – liquid extraction for graphite-furnace atomic absorption spectrometry

 A silver sample (50–300 mg) was dissolved in 6 mol/l nitric acid and mixed with 6 mol/l hydrochloric acid to form silver chloride. The solution was evaporated to dryness and the residue was treated ultrasonically in 0.1 mol/l nitric acid for the extraction of trace impurities from the silver chloride. Traces of iron, copper, lead and bismuth were recovered in greater than 94% yields, though considerable amounts of cadmium were not extracted due to the strong occlusion in the silver chloride. The separation factor for the silver was about 10^-4; hence the trace heavy metals were immediately determined by graphite-furnace atomic absorption spectrometry without any interference. The validity of the method was confirmed by the analysis of certified reference material. The proposed method is simple and allows the detection of as little as 10 ng/g levels in silver samples. Received: 13 January 1995/Accepted: 29 March 1995     

Organosilica composite for preconcentration of phenolic compounds from aqueous solutions

A new adsorbent is proposed for the solid-phase extraction of phenol and 1-naphthol from polluted water. The adsorbent (TX-SiO₂) is an organosilica composite made from a bifunctional immobilized layer comprising a major fraction (91%) of hydrophilic diol groups and minor fraction (9%) of the amphiphilic long-chain nonionic surfactant Triton X-100 (polyoxyethylated isooctylphenol) (TX). Under static conditions phenol was quantitatively extracted onto TX-SiO₂ in the form of a 4-nitrophenylazophenolate ion associate with cetyltrimethylammonium bromide. The capacity of TX-SiO₂ for phenol is 2.4 mg g⁻¹ with distribution coefficients up to 3.4 × 10⁴ mL g⁻¹; corresponding data for 1-naphthol are 1.5 mg g⁻¹ and 3 × 10³ mL g⁻¹. The distribution coefficient does not change significantly for solution volumes of 0.025–0.5 L and adsorbent mass less than 0.03 g; 1–90 μg analyte can be easily eluted by 1–3 mL acetonitrile with an overall recovery of 98.2% and 78.3% for phenol and 1-naphthol, respectively. Linear correlation between acetonitrile solution absorbance (A ₅₄₀) and phenol concentration (C) in water was found according to the equation A ₅₄₀ = (6 ± 1) × 10⁻² + (0.9 ± 0.1)C (μmol L⁻¹) with a detection range from 1 × 10⁻⁸ mol L⁻¹ (0.9 μL g⁻¹) to 2 × 10⁻⁷ mol L⁻¹ (19 μL g⁻¹), a limit of quantification of 1 μL g⁻¹ (preconcentration factor 125), correlation coefficient of 0.936, and relative standard deviation of 2.5%. A solid-phase colorimetric method was developed for quantitative determination of 1-naphthol on adsorbent phase using scanner technology and RGB numerical analysis. The detection limit of 1-naphthol with this method is 6 μL g⁻¹ while the quantification limit is 20 μL g⁻¹. A test system was developed for naked eye monitoring of 1-naphthol impurities in water. The proposed test kit allows one to observe changes in the adsorbent color when 1-naphthol concentration in water is 0.08–3.2 mL g⁻¹.