Controlled Pd(0)/t-Bu(3)P-Catalyzed Suzuki Cross-Coupling Polymerization of AB-Type Monomers with PhPd(t-Bu(3)P)I or Pd(2)(dba)(3)/t-Bu(3)P/ArI as the Initiator

Controlled Pd(0)/t-Bu(3)P-catalyzed Suzuki cross-coupling polymerizations of AB-type monomers via the chain-growth mechanism with an ArPd(t-Bu(3)P)I complex as the initiator are described. ArPd(t-Bu(3)P)I complexes, either prepurified or generated in situ from Pd(2)(dba)(3)/t-Bu(3)P/ArI (dba = dibenzylideneacetone) without separation/purification, were found to be efficient initiators in general for the controlled Suzuki cross-coupling polymerization, with narrow polydispersity indexes (PDIs) of 1.13-1.35 being observed. The Pd(2)(dba)(3)/t-Bu(3)P/p-BrC(6)H(4)I combination was identified as a highly robust initiator system, with PDIs of ≤1.20 in general and as low as 1.13 being obtained. Higher number-average molecular weights (M(n)) were achieved without a significant increase in the PDI (from 1.14 for a polymer with a M(n) = 9500 to 1.20 for a polymer with M(n) = 31?400) by using a smaller amount of the Pd(2)(dba)(3)/t-Bu(3)P/p-BrC(6)H(4)I initiator in the polymerization.     

Air-stable Pd(R-allyl)LCl (L= Q-Phos, P(t-Bu)3, etc.) systems for C-C/N couplings: insight into the structure-activity relationship and catalyst activation pathway

A series of Pd(R-allyl)LCl complexes [R = H, 1-Me, 1-Ph, 1-gem-Me(2), 2-Me; L = Q-Phos, P(t-Bu)(3), P(t-Bu)(2)(p-NMe(2)C(6)H(4)), P(t-Bu)(2)Np] have been synthesized and evaluated in the Buchwald-Hartwig aminations in detail, in addition to the preliminary studies on Suzuki coupling and α-arylation reactions. Pd(crotyl)Q-PhosCl (9) was found to be a superior catalyst to the other Q-Phos-based catalysts, and the reported in situ systems, in model coupling reactions involving 4-bromoanisole substrate with either N-methylaniline or 4-tert-butylbenzeneboronic acid. Precatalyst 9 also performed better than the catalysts bearing P(t-Bu)(2)(p-NMe(2)C(6)H(4)) ligand; however, it is comparable to the new crotyl catalysts bearing P(t-Bu)(3) or P(t-Bu)(2)Np ligands. In α-arylation of a biologically important model substrate, 1-tetralone, Pd(allyl)P(t-Bu)(2)(p-NMe(2)C(6)H(4))Cl (15) was found to be the best catalyst. The reason for the relatively higher activity of the crotyl complexes in comparison to the allyl derivatives in C-N bond formation reactions was investigated using X-ray crystallography in conjunction with NMR spectroscopic studies.     

Cp2Fe(PR2)2PdCl2 (R = i-Pr, t-Bu) complexes as air-stable catalysts for challenging Suzuki coupling reactions

[reaction: see text] The use of Cp(2)Fe(PR(2))(2)PdCl(2) (R = i-Pr and t-Bu) in Suzuki coupling reactions were illustrated using a high throughput screening approach. The di-tbpfPdCl(2) catalyst was shown to be the more active catalyst for unactivated and sterically challenging aryl chlorides. Comparison studies using the commercial catalysts dppfPdCl(2), (Ph(3)P)(2)PdCl(2), (Cy(3)P)(2)PdCl(2), DPEPhosPdCl(2), dppbPdCl(2), dppePdCl(2), Pd(t-Bu(3)P)(2), and [Pd(mu-Br)(t-Bu(3)P)](2) were also done for selected cases to demonstrate the superior activities of di-tbpfPdCl(2) and di-isoppfPdCl(2).     

Pd/P(t-Bu)(3): a mild and general catalyst for Stille reactions of aryl chlorides and aryl bromides

Pd/P(t-Bu)(3) serves as an unusually reactive catalyst for Stille reactions of aryl chlorides and bromides, providing solutions to a number of long-standing challenges. An unprecedented array of aryl chlorides can be cross-coupled with a range of organotin reagents, including SnBu(4). Very hindered biaryls (e.g., tetra-ortho-substituted) can be synthesized, and aryl chlorides can be coupled in the presence of aryl triflates. The method is user-friendly, since a commercially available complex, Pd(P(t-Bu)(3))(2), is effective. Pd/P(t-Bu)(3) also functions as an active catalyst for Stille reactions of aryl bromides, furnishing the first general method for room-temperature cross-couplings.     

Aryl-fluoride reductive elimination from Pd(II): feasibility assessment from theory and experiment

DFT methods were used to elucidate features of coordination environment of Pd(II) that could enable Ar-F reductive elimination as an elementary C-F bond-forming reaction potentially amenable to integration into catalytic cycles for synthesis of organofluorine compounds with benign stoichiometric sources of F(-). Three-coordinate T-shaped geometry of Pd(II)Ar(F)L (L = NHC, PR(3)) was shown to offer kinetics and thermodynamics of Ar-F elimination largely compatible with synthetic applications, whereas coordination of strong fourth ligands to Pd or association of hydrogen bond donors with F each caused pronounced stabilization of Pd(II) reactant and increased activation barrier beyond the practical range. Decreasing donor ability of L promotes elimination kinetics via increasing driving force and para-substituents on Ar exert a sizable SNAr-type TS effect. Synthesis and characterization of the novel [Pd(C(6)H(4)-4-NO(2))ArL(mu-F)](2) (L = P(o-Tolyl)(3), 17; P(t-Bu)(3), 18) revealed stability of the fluoride-bridged dimer forms of the requisite Pd(II)Ar(F)L as the key remaining obstacle to Ar-F reductive elimination in practice. Interligand steric repulsion with P(t-Bu)(3) served to destabilize dimer 18 by 20 kcal/mol, estimated with DFT relative to PMe(3) analog, yet was insufficient to enable formation of greater than trace quantities of Ar-F; C-H activation of P(t-Bu)(3) followed by isobutylene elimination was the major degradation pathway of 18 while Ar/F- scrambling and Ar-Ar reductive elimination dominated thermal decomposition of 17. However, use of Buchwald's L = P(C(6)H(4)-2-Trip)(t-Bu)(2) provided the additional steric pressure on the [PdArL(mu-F)](2) core needed to enable formation of aryl-fluoride net reductive elimination product in quantifiable yields (10%) in reactions with both 17 and 18 at 60 degrees over 22 h.     

Directly observed reductive elimination of aryl halides from monomeric arylpalladium(II) halide complexes

Monomeric, three-coordinate arylpalladium(II) halide complexes undergo reductive elimination of aryl halide to form free haloarene and Pd(0). Reductive elimination of aryl chlorides, bromides, and iodides were observed upon the addition of P(t-Bu)3 to Pd[P(t-Bu)3](Ar)(X) (X = Cl, Br, I). Conditions to observe the equilibrium between reductive elimination and oxidative addition were established with five haloarenes. Reductive elimination of aryl chloride was most favored thermodynamically, and elimination of aryl iodide was the least favored. However, reductive elimination from the aryl chloride complex was the slowest, and reductive elimination from the aryl bromide complex was the fastest. These data show that the electronic properties of the halide, not the thermodynamic driving force for the addition of elimination reaction, control the rates for addition and elimination of haloarenes. Mechanistic data suggest that reversible reductive elimination of aryl bromide to form Pd[P(t-Bu)3] and free aryl bromide is followed by rate-limiting coordination of P(t-Bu)3 to form Pd[P(t-Bu)3]2.     

Pd(PhCN)(2)Cl(2)/P(t-Bu)(3): a versatile catalyst for Sonogashira reactions of aryl bromides at room temperature

[reaction: see text] Pd(PhCN)(2)Cl(2)/P(t-Bu)(3) serves as an efficient and a versatile catalyst for room-temperature Sonogashira reactions of aryl bromides.     

Efficient synthesis of alpha-aryl esters by room-temperature palladium-catalyzed coupling of aryl halides with ester enolates

A catalytic amount of Pd(dba)(2) ligated by either carbene precursor N,N'-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazolium (1) or P(t-Bu)(3) mediated the coupling of aryl halides and ester enolates to produce alpha-aryl esters in high yields at room temperature. The reaction was highly tolerant of functionalities and substitution patterns on the aryl halide. Improved protocols for the selective monoarylation of tert-butyl acetate and the efficient arylation of alpha,alpha-disubstituted esters were developed with LiNCy(2) as base and P(t-Bu)(3) as ligand. In addition, tert-butyl esters, such as those of Naproxen and Flurbiprofen, were prepared from tert-butyl propionate and aryl bromides in high yields in the presence of Pd(dba)(2) and the hindered, saturated heterocyclic carbene ligand precursor.     

Bis(isothiocyanato)bis(phosphine) complexes of group 10 metals: reactivity toward organic isocyanides

Treatment of Ni(NCS)2(PMe2Ph)2 with organic isocyanides CN-R gave five-coordinate isocyanide Ni(II) complexes, Ni(CN-R)(NCS)2(PMe2Ph)2 (R = C6H3-2,6-Me2 (1), t-Bu (2)). Interestingly, the corresponding reaction of Ni(NCS)2(P(n-Pr)3)2 with 2 equiv. of CN-t-Bu gave an unusual compound, which exists as an ion pair of the trigonal bipyramidal cation [Ni(P(n-Pr)3)2(CN-t-Bu)3]2+ (3) and the dinuclear NCS-bridged anion [Ni(1,3-micro-NCS)(NCS)3]2(2-) (4). In contrast, Pd(NCS)2(P(n-Pr)3)2 underwent substitution with 2 equiv. of CN-t-Bu to give the four-coordinate mono(isocyanide) Pd(II) complex Pd(NCS)(SCN)(CN-t-Bu)(P(n-Pr)3) (5) via phosphine dissociation. Reactions of M(NCS)2L2 (M = Pd, Pt; L = PMe3, PEt3, PMePh2, P(n-Pr)3) with two equiv. of CN-R (R = t-Bu, i-Pr, C6H3-2,6-Me2) gave the corresponding bis(isocyanide) complexes [M(CN-R)2(PR3)2](SCN)2 (7-13), except for Pd(NCS)2(PEt3)2 that reacted with CN-R' (R' = i-Pr, C6H3-2,6-Me2) and produced the mono(isocyanide) Pd(II) complexes [Pd(CN-R')(SCN)(PEt3)2](SCN) (14 and 15). Finally, treatment of M(NCS)2(PMe3)2 (M = Ni, Pd, Pt) with sterically bulky isocyanide CN-C6H3-2,6-i-Pr2 gave various products, (16-18) depending on the identity of the metal.     

Palladium-catalyzed rearrangement/arylation of 2-allyloxypyridine leading to the synthesis of N-substituted 2-pyridones

[reaction: see text] The Pd-catalyzed one-pot rearrangement/arylation of 2-allyloxypyridine is described. The catalyst/base combination of Pd[P(t-Bu)(3)](2)/Ag(2)CO(3) was found to be optimal for this one-pot rearrangement/arylation. The initial rearrangement of 2-allyloxypyridine was found to be catalyzed by both Pd(0) and Pd(II) complexes with different mechanisms.     

Suzuki-Miyaura coupling reaction using pentafluorophenylboronic acid

[reaction: see text] We have found new conditions for the Suzuki-Miyaura coupling reaction applicable to pentafluorophenylboronic acid (C(6)F(5)B(OH)(2)) (1), which is an inactive substrate under normal conditions. The reactions of 1 with phenyl iodide or bromide under Pd(PPh(3))(4)/CsF/Ag(2)O or Pd(2)(dba)(3)/P(t-Bu)(3)/CsF/Ag(2)O catalytic system conditions gave 2,3,4,5,6-pentafluoro-1,1'-biphenyl (3a) in more than 90% yields. Combination of CsF and Ag(2)O was essential for promoting these reactions.     

The first general method for palladium-catalyzed Negishi cross-coupling of aryl and vinyl chlorides: use of commercially available Pd(P(t-Bu)(3))(2) as a catalyst.

With a single protocol, commercially available Pd(P(t-Bu)(3))(2) can effect the Negishi cross-coupling of a wide range of aryl and vinyl chlorides with aryl- and alkylzinc reagents. The process tolerates nitro groups, and it efficiently generates sterically hindered biaryls. In addition, a high turnover number (>3000) can be achieved.     

Thermal and electrochemical C-X activation (X = Cl,Br, I) by the strong Lewis acid Pd3(dppm)3(CO)2+ cluster and its catalytic applications

The stoichiometric and catalytic activations of alkyl halides and acid chlorides by the unsatured Pd(3)(dppm)(3)(CO)(2+) cluster (Pd(3)(2+)) are investigated in detail. A series of alkyl halides (R-X; R = t-Bu, Et, Pr, Bu, allyl; X = Cl, Br, I) react slowly with Pd(3)(2+) to form the corresponding Pd(3)(X)(+) adduct and "R(+)". This activation can proceed much faster if it is electrochemically induced via the formation of the paramagnetic species Pd(3)(+). The latter is the first confidently identified paramagnetic Pd cluster. The kinetic constants extracted from the evolution of the UV-vis spectra for the thermal activation, as well as the amount of electricity to bring the activation to completion for the electrochemically induced reactions, correlate the relative C-X bond strength and the steric factors. The highly reactive "R(+)" species has been trapped using phenol to afford the corresponding ether. On the other hand, the acid chlorides react rapidly with Pd(3)(2+) where no induction is necessary. The analysis of the cyclic voltammograms (CV) establishes that a dissociative mechanism operates (RCOCl --> RCO(+) + Cl(-); R = t-Bu, Ph) prior to Cl(-) scavenging by the Pd(3)(2+) species. For the other acid chlorides (R = n-C(6)H(13), Me(2)CH, Et, Me, Pr), a second associative process (Pd(3)(2+) + RCOCl --> Pd(3)(2+.....)Cl(CO)(R)) is seen. Addition of Cu(NCMe)(4)(+) or Ag(+) leads to the abstraction of Cl(-) from Pd(3)(Cl)(+) to form Pd(3)(2+) and the insoluble MCl materials (M = Cu, Ag) allowing to regenerate the starting unsaturated cluster, where the precipitation of MX drives the reaction. By using a copper anode, the quasi-quantitative catalytic generation of the acylium ion ("RCO(+)") operates cleanly and rapidly. The trapping of "RCO(+)" with PF(6)(-) or BF(4)(-) leads to the corresponding acid fluorides and, with an alcohol (R'OH), to the corresponding ester catalytically, under mild conditions. Attempts were made to trap the key intermediates "Pd(3)(Cl)(+)...M(+)" (M(+) = Cu(+), Ag(+)), which was successfully performed for Pd(3)(ClAg)(2+), as characterized by (31)P NMR, IR, and FAB mass spectrometry. During the course of this investigation, the rare case of PF(6)(-) hydrolysis has been observed, where the product PF(2)O(2)(-) anion is observed in the complex Pd(3)(PF(2)O(2))(+), where the substrate is well-located inside the cavity formed by the dppm-Ph groups above the unsatured face of the Pd(3)(2+) center. This work shows that Pd(3)(2+) is a stronger Lewis acid in CH(2)Cl(2) and THF than AlCl(3), Ag(+), Cu(+), and Tl(+).     

Gold(I) phosphido complexes: synthesis, structure, and reactivity

Deprotonation of the phosphine complexes Au(PHR(2))Cl with aqueous ammonia gave the gold(I) phosphido complexes [Au(PR(2))](n)() (PR(2) = PMes(2) (1), PCy(2) (2), P(t-Bu)(2) (3), PIs(2) (4), PPhMes (5), PHMes (6); Mes = 2,4,6-Me(3)C(6)H(2), Is = 2,4,6-(i-Pr)(3)C(6)H(2), Mes = 2,4,6-(t-Bu)(3)C(6)H(2), Cy = cyclo-C(6)H(11)). (31)P NMR spectroscopy showed that these complexes exist in solution as mixtures, presumably oligomeric rings of different sizes. X-ray crystallographic structure determinations on single oligomers of 1-4 revealed rings of varying size (n = 4, 6, 6, and 3, respectively) and conformation. Reactions of 1-3 and 5 with PPN[AuCl(2)] gave PPN[(AuCl)(2)(micro-PR(2))] (9-12, PPN = (PPh(3))(2)N(+)). Treatment of 3 with the reagents HI, I(2), ArSH, LiP(t-Bu)(2), and [PH(2)(t-Bu)(2)]BF(4) gave respectively Au(PH(t-Bu)(2))(I) (14), Au(PI(t-Bu)(2))(I) (15), Au(PH(t-Bu)(2))(SAr) (16, Ar = p-t-BuC(6)H(4)), Li[Au(P(t-Bu)(2))(2)] (17), and [Au(PH(t-Bu)(2))(2)]BF(4) (19).     

Vinyl oxidative coupling as a synthetic route to catalytically active monovalent chromium

Reaction of the deprotonated form of cis-{(t-Bu)N(H)P[μ-N(t-Bu)](2)PN(H)(t-Bu)} with CrCl(3)(THF)(3) afforded the trivalent cis-{(t-Bu)NP[μ-N(t-Bu)](2)PN(t-Bu)}[Li (THF)])CrCl(2) (1). Subsequent reaction with 2 equiv of vinyl Grignard (CH(2)=CH)Mg Cl gave the butadiene derivative (cis-{(t-Bu)NP[μ-N(t-Bu)](2)PN(t-Bu)}[Li(THF)])Cr(cis-η(4)-butadiene) (3) formally containing the metal in its monovalent state. The presence of the monovalent state was thereafter confirmed by DFT calculations. The coordination of the butadiene unit appears to be rather robust since reaction with Me(3)P afforded cleavage of the dimeric ligand core but not its displacement. The reaction formed the new butadiene complex [(t-Bu)N-P-N(t-Bu)]Cr(cis-η(4)-butadiene)PMe(3) (4) containing a regular NPN monoanion. In agreement with the presence of monovalent chromium, complexes 3 and 4 act as single-component self-activating catalysts for selective ethylene trimerization and dimerization, respectively.     

Salen-type compounds of calcium and strontium

Salen complexes of the heavy alkaline-earth metals, calcium and strontium, were prepared by the reaction of various salen(t-Bu)H(2) ligands with the metals in ethanol. Six new calcium and strontium compounds, [Ca(salen(t-Bu))(HOEt)(2)(thf)] (1), [Ca(salen(t-Bu))(HOEt)(2)] (2), [Ca(salpen(t-Bu))(HOEt)(3)] (3), [Ca(salophen(t-Bu))(HOEt)(thf)] (4), [Sr(salen(t-Bu))(HOEt)(3)] (5), and [Sr(salophen(t-Bu))(HOEt)(thf)(2)] (6), were formed in this way with the quatridentate Schiff-base ligands N,N'-bis(3,5-di-tert-butylsalicylidene)ethylenediamine (salen(t-Bu)H(2)), N,N'-bis(3,5-di-tert-butylsalicylidene)-1,3-propanediamine (salpen(t-Bu)H(2)), and N,N'-o-phenylenebis(3,5-di-tert-butylsalicylideneimine (salophen(t-Bu)H(2)). Initially, ammonia solutions of the metals were combined with the salen(t-Bu)H(2) ligands, and in the reaction of strontium with salen(t-Bu)H(2), the unusual tetrametallic cluster [(OC(6)H(2)(t-Bu)(2)CHN(CH(2))(2)NH(2))Sr(mu(3)-salean(t-Bu)H(2))Sr(mu(3)-OH)](2) (7) was produced (salean(t-Bu)H(4) = N,N'-bis(3,5-di-tert-butyl-2-hydroxybenzyl)ethylenediamine). In this compound, the imine bonds of the salen(t-Bu)H(2) ligand were reduced to form the known ligands salean(t-Bu)H(4) and (HO)C(6)H(2)(t-Bu)(2)CHN(CH(2))(2)NH(2). Compounds 1, 5, 6, and 7 were structurally characterized by single-crystal X-ray diffraction. Crystal data for 1 (C(44)H(74)CaN(2)O(6)): triclinic space group P(-)1, a = 8.3730(10) A, b = 14.8010(10) A, c = 18.756(2) A, alpha = 72.551(10) degrees, beta = 81.795(10) degrees, gamma = 78.031(10) degrees, Z = 2. Crystal data for 5 (C(38)H(64)SrN(2)O(5)): monoclinic space group P2(1)/c, a = 23.634(3) A, b = 8.4660(10) A, c = 24.451(3) A, beta = 101.138(10) degrees, Z = 4. Crystal data for 6 (C(46)H(67)N(2)O(5)Sr): orthorhombic space group P2(1)2(1)2(1), a = 10.5590(2) A, b = 16.2070(3) A, c = 26.7620(6) A, Z = 4. Crystal data for 7 (C(98)H(156)N(8)O(8)Sr(4)): triclinic space group P(-)1, a = 14.667(1) A, b = 15.670(1) A, c = 18.594(2) A, alpha = 92.26(1) degrees, beta = 111.84(1) degrees, gamma = 117.12(1) degrees, Z = 4.     

Suzuki cross-coupling of solid-supported chloropyrimidines with arylboronic acids

The utility of the Suzuki cross-coupling to synthesize biaryl compounds is expanded herein to include reactions of resin-supported chloropyrimidines with boronic acids. In particular, an efficient method is described for the synthesis of a library of biaryl compounds from solid-supported chloropyrimidines. The Suzuki reaction was performed in an inert atmosphere using Pd(2)(dba)(3)/P(t-Bu)(3) as catalyst, spray-dried KF as base, and THF as solvent. The reaction was allowed to proceed overnight at 50 degrees C. Upon cleavage with acid, a library of 4-(substituted amino)-6-arylpyrimidines was obtained in moderate yield and high purity.     

Secondary Amine Stabilized Aluminum Hydrides Derived from N,N'-Di-tert-butylethylenediamines

The metalation of substituted N,N'-di-tert-butylethylenediamines by various aluminum hydride sources has been investigated. HN(t-Bu)CH(t-Bu)CH(2)N(H)(t-Bu) forms a dimeric lithium chelated adduct of LiAlH(4), [{[HN(t-Bu)CH(t-Bu)CH(2)N(H)(t-Bu)]Li(&mgr;-H)(2)AlH(2)}(2)], 4, which thermally decomposes to yield the tetrameric lithium diamidoaluminum hydride [{Li[N(t-Bu)CH(t-Bu)CH(2)N(t-Bu)]AlH(2)}(4)], 5. The same diamine reacts with AlH(3).NMe(3) or AlH(3) diethyl etherate to give the secondary amine stabilized amidoaluminum hydride species [{HN(t-Bu)CH(t-Bu)CH(2)N(t-Bu)}AlH(2)], 2. Similarly, the same aluminum hydride sources react with the diamine rac-HN(t-Bu)CH(Me)CH(Me)N(H)(t-Bu) to yield [{rac-HN(t-Bu)CH(Me)CH(Me)N(t-Bu)}AlH(2)], 3. Compounds 2 and 3 are stable with respect to elimination of hydrogen to form diamidoaluminum hydrides, but can be converted to the alane rich species, [H(2)Al{N(t-Bu)CH(t-Bu)CH(2)N(t-Bu)}AlH(2)],6, and [H(2)Al{rac-N(t-Bu)CH(Me)CH(Me)N(t-Bu)}AlH(2)], 7, by reaction with AlH(3).NMe(3) under special conditions. The varying reactivity of the three aluminum hydride sources in these reactions has enabled mechanistic information to be gathered, and the effect of the different steric requirements in the diamines on the stability of the complexes is discussed. Crystals of 3are monoclinic, space group P2(1)/n (No. 14), with a = 8.910(4), b = 14.809(1), and c = 12.239(6) ?, beta = 109.76(2) degrees, V = 1520(1) ?(3), and Z = 4. Crystals of 4 are orthorhombic, space group Pbca (No. 61), with a = 15.906(9), b = 24.651(7), and c = 9.933(7) ?, V = 3895(3) ?(3), and Z = 4. Crystals of 6 are monoclinic, space group P2(1)/c (No. 14), with a = 8.392(1), b = 17.513(2), and c = 12.959(1) ?, beta = 107.098(8) degrees, V = 1820.4(3) ?(3), and Z = 4.     

Palladium-catalyzed alpha-arylation of esters with chloroarenes

Palladium-catalyzed alpha-arylations of esters with chloroarenes are reported. The reactions of chloroarenes with the sodium enolates of tert-butyl propionate and methyl isobutyrate occur in high yields with 0.2-1 mol % of {[P(t-Bu)3]PdBr}2 or the combination of Pd(dba)2 and P(t-Bu)3 as catalyst. The reactions of chloroarenes with the Reformatsky reagent of tert-butyl acetate were most challenging but occurred in high yields for chlorobenzene and electron-poor chloroarenes catalyzed by 1 mol % of Pd(dba)2 and pentaphenylferrocenyl di-tert-butylphosphine (Q-phos).     

A repetitive one-step method for oligoarene synthesis using catalyst-controlled chemoselective cross-coupling

A method for oligoarene synthesis involving chemoselective cross-coupling as the key reaction was developed. Boronic acids with a chloro or trifluoromethanesulfonyloxy group were used as the monomer precursors with either of two chemoselective catalytic systems: Pd with P(t-Bu)(3), and Pd with 1,1'-bis(diphenylphosphino)ferrocene (DPPF). This method enabled elongation by one benzene unit in every step and thus reduced the number of steps required for elongation of oligoarene chains with well-defined lengths and sequences of substituted benzene rings.