Fabrication and kinetic studies of a novel silver nanoparticles-glucose oxidase bioconjugate

In this study, a new effective, pH and thermally stable glucose oxidase (GOX)-silver nanoparticles (AgNPs) bioconjugate was designed. AgNPs were synthesized based on the reduction of silver nitrate (AgNO₃) by sodium borohydride (NaBH₄) using two simple procedures. Periodic acid was used for oxidation of the GOX and emission of Lucifer yellow (LyCH) was monitored by spectrofluorometer for evaluation of the oxidation properties of the GOX. The oxidized GOX (Ox-GOX) was immobilized on AgNPs by its sugar moieties via 6-aminohexanoic acid (6AHA) as linker. A sample of the synthesized bioconjugate was loaded on 7.5% non-denaturing polyacrylamide gel electrophoresis (PAGE) to confirm its structural and physical stability. The results from enzymatic activity assay showed that the bioconjugate, GOX and Ox-GOX were similar in stability and activity in acidic and basic pH (optimum pH = 7.0-8.0). Based on the results from thermal stability assay, it was found that the activity of the bioconjugate was found to be higher at lower temperatures. The V_max of the bioconjugate, GOX, and Ox-GOX was estimated as 28.6, 6.2, and 6 IU μg⁻¹ enzyme and the K_m was calculated as 2.7, 9, and 9.5 mM, respectively. It was found that the immobilization method improves the activity and stability of the GOX in different pH and temperatures. As a conclusion, the proposed method opens up the way to the development of a new bioconjugate with potential use in sensing, and many find potential applications in clinical diagnostics, medicine, and industries.     

Enzymatic chemiluminescent assay of glucose by sequential-injection analysis with soluble enzyme and on-line sample dilution

This work reports a sequential-injection analysis (SIA) method for the enzymatic assay of glucose with soluble glucose oxidase (GOD) and on-line sample dilution with chemiluminescence (CL) detection. A zone of sample was aspirated in the holding coil of the SIA manifold and, if necessary, was diluted on-line by means of an auxiliary dilution conduit. Then, a zone of GOD was aspirated adjacent to the sample zone and a stopped-flow period was applied to allow the enzymatic reaction to proceed with production of hydrogen peroxide. Then, zones of a catalyst (Co(II) solution) and alkaline luminol were aspirated into the holding coil. Finally, the flow was reversed and the stacked zones were sent to a flow-cell located in front of a photomultiplier tube (PMT) that monitored the CL intensity. The linear dynamic range was 1 × 10⁻⁵-1 × 10⁻³ mol L⁻¹ glucose, the coefficient of variation at 8 × 10⁻⁵ mol L⁻¹ of glucose was s_r = 3.1% (n = 8), the limit of detection at the 3σ level was c_L = 1 × 10⁻⁶ mol L⁻¹ and the sampling frequency was 28 h⁻¹. With on-line dilution by a factor of 1/200, the linear range could be extended up to 0.2 mol L⁻¹ glucose. The advantages of the proposed method are the simple manifold and instrumentation used, the scope for automated on-line dilution, the low consumption of sample and reagents and the elimination of enzyme immobilisation procedures. The method was applied to the analysis of commercial drinks and honey with percent relative errors in glucose determination in the range 100 ± 6.1%.     

Direct electrochemistry of glucose oxidase entrapped in nano gold particles-ionic liquid-N,N-dimethylformamide composite film on glassy carbon electrode and glucose sensing

The direct electrochemistry of glucose oxidase (GOD) entrapped in nano gold particles (NAs)-N,N-dimethylformamide (DMF)-1-butyl-3-methylimidazolium hexafluophosphate (BMIMPF₆) composite film on a glassy carbon electrode (NAs-DMF-GOD (BMIMPF₆)/GC) has been investigated for first time. The immobilized GOD exhibits a pair of well-defined reversible peaks in 0.050 M pH 5 phosphate solutions (PS), resulting from the redox of flavin adenine dinucleotide (FAD) in GOD. The peak currents are three times as large as those of GOD-NAs-DMF film coated GC electrode (i.e. NAs-DMF-GOD (water)/GC). In addition, the NAs-DMF-GOD (BMIMPF₆) composite material has higher thermal stability than NAs-DMF-GOD (water). Results show that ionic liquid BMIMPF₆, DMF and NAs are requisite for GOD to exhibit a pair of stable and reversible peaks. Without any of them, the peaks of GOD become small and unstable. Upon the addition of glucose, the peak currents of GOD decrease and a new cathodic peak occurs at −0.8 V (versus SCE), which corresponds to the reduction of hydrogen peroxide (H₂O₂) generated by the catalytic oxidation of glucose. The peak current of the new cathodic peak and the glucose concentration show a linear relationship in the ranges of 1.0 × 10⁻⁷ to 1.0 × 10⁻⁶ M and 2.0 × 10⁻⁶ to 2.0 × 10⁻⁵ M. The kinetic parameter I_max of H₂O₂ is estimated to be 1.19 × 10⁻⁶ A and the apparent K_m (Michaelis-Menten constant) for the enzymatic reaction is 3.49 μM. This method has been successfully applied to the determination of glucose in human plasma and beer samples, and the average recoveries are 97.2% and 99%, respectively.     

Glucose concentration determination based on silica sol-gel encapsulated glucose oxidase optical biosensor arrays

Optical biosensor arrays for rapidly determining the glucose concentrations in a large number of beverage and blood samples were developed by immobilizing glucose oxidase (GOD) on oxygen sensor layer. Glucose oxidase was first encapsulated in silica based gels through sol-gel approach and then immobilized on 96-well microarrays integrated with oxygen sensing film at the bottom. The oxygen sensing film was made of an organically modified silica film (ORMOSIL) doped with tris(4,7-diphenyl-1,10-phenanthroline) ruthenium dichloride (Ru(dpp)₃Cl₂). The oxidation reaction of glucose by glucose oxidase could be monitored through fluorescence intensity enhancement due to the oxygen consumption in the reaction. The luminescence changing rate evaluated by the dynamic transient method (DTM) was correlated with the glucose concentration with the wide linear range from 0.1 to 5.0 mM (Y = 13.28X − 0.128, R = 0.9968) and low detection limit (0.06 mM). The effects of pH and coexisting ions were systemically studied. The results showed that the optical biosensor arrays worked under a wide range of pH value, and normal interfering species such as Na⁺, K⁺, Cl⁻, PO₄³⁻, and ascorbic acid did not cause apparent interference on the measurement. The activity of glucose oxidase was mostly retained even after 2-month storage, indicating their long-term stability.     

Polyethyleneimine-capped silver nanoclusters as a fluorescence probe for sensitive detection of hydrogen peroxide and glucose

In this work, we utilized polyethyleneimine-capped silver nanoclusters (PEI-Ag nanoclusters) to develop a new fluorometric method for the determination of hydrogen peroxide and glucose with high sensitivity. The PEI-Ag nanoclusters have an average size of 2 nm and show a blue emission at 455 nm. The photostable properties of the PEI-Ag nanoclusters were examined. The fluorescence of the PEI-Ag nanoclusters could be particularly quenched by H₂O₂. The oxidization of glucose by glucose oxidase coupled with the fluorescence quenching of PEI-Ag nanoclusters by H₂O₂ can be used to detect glucose. Under optimum conditions, the fluorescence intensity quenched linearly in the range of 500 nM–100 μM with high sensitivity. The detection limit for H₂O₂ was 400 nM. And a linear correlation was established between fluorescence intensity (F₀ − F) and concentration of glucose in the range of 1.0 × 10⁻⁶ to 1.0 × 10⁻⁵ M and 1.0 × 10⁻⁵ to 1.0 × 10⁻³ M with a detection limit of 8.0 × 10⁻⁷ M. The method was used for the detection of glucose in human serum samples with satisfactory results. Furthermore, the mechanism of sensitive fluorescence quenching response of Ag nanoclusters to glucose and H₂O₂ has been discussed.     

Optical properties of bis(cyclopentadienyl)magnesium: excimer-type luminescence of the bis(cyclopentadienyl) ligand frame

The electronic spectra of solid MgCp₂ (Cp = cyclopentadienyl) show features which indicate the presence of intramolecular interligand interactions. The fluorescence of MgCp₂ (λ_max = 363 nm) undergoes a considerable Stokes shift which is apparently caused by a bonding attraction between both Cp rings in the excited state. An additional phosphorescence of the (Cp⁻)₂ fragment (λ_max = 535 nm) appears at 77 K.     

Fluorescence anisotropy: application in quantitative enzymatic determinations

In this work a method is presented for the enzymatic determination of glucose using fluorescence anisotropy. During the enzymatic reaction a change in the fluorescence anisotropy of the glucose oxidase (GOx) is produced; the reaction time at which this change appears (t_m) depends on the glucose concentration. A theoretical study has been developed which enables: (a) the correlation of this change in anisotropy with changes in the intensity and the lifetime of the enzyme fluorescence; from this a model which could be generalized to other flavo-enzymes is proposed; (b) the linking of t_m with glucose concentration.After optimisation, the proposed method allows the determination of glucose over the range 100-1000 mg l⁻¹. The detection limit is 90 mg l⁻¹and the reproducibility is better than 4% (n = 6, [glucose] = 250 mg l⁻¹). Anisotropy is more selective than conventional fluorescence intensity, and this method has therefore been applied to direct glucose determination in fruit juices without the interference caused by the inner filter effect.     

Fluorometric method for the determination of hydrogen peroxide and glucose with Fe3O4 as catalyst

In this paper, we utilized the instinct peroxidase-like property of Fe₃O₄ magnetic nanoparticles (MNPs) to establish a new fluorometric method for determination of hydrogen peroxide and glucose. In the presence of Fe₃O₄ MNPs as peroxidase mimetic catalyst, H₂O₂ was decomposed into radical that could quench the fluorescence of CdTe QDs more efficiently and rapidly. Then the oxidization of glucose by glucose oxidase was coupled with the fluorescence quenching of CdTe QDs by H₂O₂ producer with Fe₃O₄ MNPs catalyst, which can be used to detect glucose. Under the optimal reaction conditions, a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of H₂O₂ from 1.8 × 10⁻⁷ to 9 × 10⁻⁴ mol/L with a detection limit of 1.8 × 10⁻⁸ mol/L. And a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of glucose from 1.6 × 10⁻⁶ to 1.6 × 10⁻⁴ mol/L with a detection limit of 1.0 × 10⁻⁶ mol/L. The proposed method was applied to the determination of glucose in human serum samples with satisfactory results.     

Sensing hydrogen peroxide involving intramolecular charge transfer pathway: A boronate-functioned styryl dye as a highly selective and sensitive naked-eye sensor

The synthesis, properties and applications of a novel boronate-functioned styryl dye, BSD, as a colorimetric sensor for hydrogen peroxide is presented. The dye displayed remarkable color change from colorless (λ_max = 391 nm) to deep red (λ_max = 522 nm) in the presence of H₂O₂ and the behavior could be rationalized by the chemoselective H₂O₂-mediated transformation of arylboronate to phenolate, resulting in the release of the merocyanine dye which featured with strong intramolecular charge transfer (ICT) absorption band. The absorption increment of merocyanine at λ_max = 522 nm (? = 87000 L mol⁻¹ cm⁻¹) is linear with the concentration of H₂O₂ in the range of 1.0 × 10⁻⁷-2.5 × 10⁻⁵ mol L⁻¹ with the detection limit of 6.8 × 10⁻⁸ mol L⁻¹ under optimum conditions. There is almost no interference by other species that commonly exist due to the specific deprotection of H₂O₂ towards arylboronate group on BSD. The chromogenic sensor has been applied to the detection of trace amounts of hydrogen peroxide in rain water.     

Mn(II)-sodium dodecyl sulphate complex mimic enzyme-catalyzed fluorescence quenching of Pyronine B by hydrogen peroxide

Mn(II)-sodium dodecyl sulphate complex (Mn(II)-SDS) is used to mimic the active group of peroxidase. The catalytic characteristic of this mimic enzyme catalyst in the oxidation reaction of fluorescence substrate, tetraethyldiaminoxanthyl chloride (Pyronine B (PB)), with hydrogen peroxide has been studied. The experimental results show that Mn(II)-SDS complex has similar catalytic activity that of peroxidase. The steady-state catalytic rate depends upon mimic enzyme and substrate concentrations, and the Michaelis-Menten parameters K_m, V_max and K_cat are 7.6×10⁻⁶ M, 7.9×10⁻⁷ M s⁻¹ and 7.9 s⁻¹, respectively. The catalytic activity of Mn(II)-SDS complex is compared with those of HRP and Hemin. Though the catalytic activity of Mn(II)-SDS complex is 15.9% of that of HRP, it can catalyze the oxidation reaction of PB with hydrogen peroxide lead to fluorescence quenching of PB. Under optimum conditions, linear relationship between fluorescence quenching F₀/F and concentration of H₂O₂ is in the range of (0.0-3.6) × 10⁻⁷ M. The detection limit is determined to be 3.0×10⁻⁹ M. By coupling this mimic catalytic reaction with the catalytic reaction of glucose oxidase (GOD), glucose can be detected. Linear relationship between F₀/F and concentration of glucose is in the range of (0.0-1.4) × 10⁻⁷ M. The detection limit is determined to be 4.2×10⁻⁹ M. This method is applied to the determination of glucose in human serum and the results are in good agreement with the phenol-4-aminoantipyrine (4-AAP).     

A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

Flow-injection determination of hydrogen peroxide based on fluorescence quenching of chromotropic acid catalyzed with Fe(II)

Flow-injection analysis system (FIA system), which was based on Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide, was developed for the determination of hydrogen peroxide. The chromotropic acid has a fluorescence measured at λ_em = 440 nm (emission wavelength) with λ_ex = 235 nm (excitation wavelength), and the fluorescence intensity at λ_em = 440 nm quietly decreased in the presence of hydrogen peroxide and Fe(II), which was caused by Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide. By measuring the difference of fluorescence intensity, hydrogen peroxide (1.0 × 10⁻⁸-1.0 × 10⁻³ mol L⁻¹) could be determined by the proposed FIA system, whose analytical throughput was 40 samples h⁻¹. The relative standard deviation (RSD) was 1.03% (n = 10) for 4.0 × 10⁻⁸ mol L⁻¹ hydrogen peroxide. The proposed FIA technique could be applied to the determination of hydrogen peroxide in rain water samples.     

Ultrasensitive determination of silver ion based on synchronous fluorescence spectroscopy with nanoparticles

Based on the characteristics of synchronous fluorescence spectroscopy (SFS), a new method with high sensitivity and selectivity was developed for rapid determination of silver ion with functional cadmium sulphide (CdS) nanoparticles as a fluorescence probe. When Δλ (λ_em − λ_ex) = 215 nm, maximum synchronous fluorescence is produced at 304 nm. Under optimal conditions, functional cadmium sulphide displayed a calibration response for silver ion over a wide concentration range from 0.8 × 10⁻¹⁰ to 1.5 × 10⁻⁸ mol L⁻¹. The limit of detection was 0.4 × 10⁻¹⁰ mol L⁻¹ and the relative standard deviation of seven replicate measurements for the lowest concentration (0.8 × 10⁻¹⁰ mol L⁻¹) was 2.8%. Compared with several fluorescence methods, the proposed method had a wider linear range and improved the sensitivity. Furthermore, the concentration dependence of the synchronous fluorescence intensity is effectively described by a Langmuir-type binding isotherm.     

Synthesis of new tripodal receptors—a ‘PET’ based ‘off-on’ recognition of Ag

A new set of tripodal receptors based upon an aromatic platform have been synthesized in high yields. The compounds have been characterized by spectroscopic techniques and by single crystal X-ray crystallography. These receptors are found to have good extraction ability and high transport rate for Ag(I). The receptor with imine linkages exhibits weak fluorescence emission bands at λ_max=413 and 540 nm, upon excitation at λ_max=365 nm. The fluorescence spectrum of the receptor shows enhancement in the intensity of the signal at 413 nm on binding with the Ag⁺ cation. No such significant changes are observed with other metal ions. An absorption at ∼365 nm is typical of an intraligand (π-π^∗) transition involving the imine chromophore, which produces a weak emission band at 413 nm due to quenching caused by PET from a neighboring -OH group. Participation of OH group in coordination to the metal ion reduces PET and an enhancement of fluorescence intensity is observed, signaling recognition of the metal ion.     

Selective turn-on fluorescence for Zn and Zn + Cd metal ions by single Schiff base chemosensor

Chemosensor based on Schiff base molecules (1, 2) were synthesized and demonstrated the selective fluoro/colorimetric sensing of multiple metal ions (Mn²⁺, Zn²⁺ and Cd²⁺) in acetonitrile–aqueous solution. Both 1 and 2 showed a highly selective naked-eye detectable colorimetric change for Mn²⁺ ions at 10⁻⁷ M. Fluorescence sensing studies of 1 and 2 exhibited a strong fluorescence enhancement (36 fold) selectively upon addition of Zn²⁺ (10⁻⁷ M, λ_max = 488 nm). Fluorescence titration and single crystal X-ray analysis confirmed the formation of 1:1 molecular coordination complex between 1 and Zn²⁺. Interestingly, a rare phenomenon of strong second turn-on fluorescence (190 fold, λ_max = 466 nm) was observed by the addition of Cd²⁺ (10⁻⁷ M) into 1 + Zn²⁺ or Zn²⁺ (10⁻⁷ M) into 1 + Cd²⁺. Importantly both 1 and 2 exhibited different fluorescence λ_max with clearly distinguishable color for both Zn²⁺ and Cd²⁺.     

Ultrasensitive fluorometric determination of hydrogen peroxide and glucose by using multiferroic BiFeO3 nanoparticles as a catalyst

BiFeO₃ magnetic nanoparticles (BFO MNPs) are used as a catalyst to develop an ultrasensitive method for the determination of H₂O₂. It is found that BFO MNPs can catalyze the decomposition of H₂O₂ to produce OH radicals, which in turn oxidize the weakly fluorescent benzoic acid to a strongly fluorescent hydroxylated product with a maximum emission at 405 nm. This makes it possible to sensitively quantify traces of H₂O₂. Under optimized conditions, the fluorescence intensity is observed to be well linearly correlated with H₂O₂ concentration from 2.0 × 10⁻⁸ to 2.0 × 10⁻⁵ mol L⁻¹ with a detection limit of 4.5 × 10⁻⁹ mol L⁻¹ (S/N = 3). In addition, a selective method for glucose determination is developed by using both glucose oxidase and BFO MNPs, which has a linear range for glucose concentration from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 5.0 × 10⁻⁷ mol L⁻¹. These new methods have been successfully applied for the determination of H₂O₂ in rainwater and glucose in human serum samples.     

Fluorometric determination of fluoride ion by reagent tablets containing 3-hydroxy-2'-sulfoflavone and zirconium(IV) ethylenediamine tetraacetate

A reagent tablet for determination of fluoride ion has been prepared using ethylenediamine-N,N,N′,N′-tetraacetate complex of zirconium (Zr-EDTA), 3-hydroxy-2′-flavone (FS) and an appropriate pH buffer. Dissolving of the tablet into water exhibits an intense blue fluorescence (λ_max = 460 nm) upon excitation at 377 nm and the fluorescence intensity decreases with the presence of fluoride ion. Hence, a simple fluorescent detection procedure for fluoride ion in aqueous media was successfully constructed with this tablet. The principle of this detection system is the ligand exchange reaction of FS bound to Zr-EDTA with fluoride ion. The present system provides an easy, rapid and selective determination method of fluoride ion ranging from 5 × 10⁻⁶ to 1 × 10⁻³ mol dm⁻³. The measurement of real samples with this tablet showed the similar results as those by the common method with the Alfusone reagent.     

Influence of hole mobility on the response characteristics of p-type nickel oxide thin film based glucose biosensor

RF sputtered p-type nickel oxide (NiO) thin film exhibiting tunable semiconductor character which in turns enhanced its functional properties. NiO thin film with high hole mobility is developed as a potential matrix for the realization of glucose biosensor. NiO thin film prepared under the optimized deposition conditions offer good electrical conductivity (1.5 × 10⁻³ Ω⁻¹-cm⁻¹) with high hole mobility (2.8 cm² V⁻¹ s⁻¹). The bioelectrode (GO_x/NiO/ITO/glass) exhibits a low value of Michaelis–Menten constant (K_m = 1.05 mM), indicating high affinity of the immobilized GO_x toward the analyte (glucose). Due to the high surface coverage (2.32 × 10⁻⁷ mol cm⁻²) of the immobilized enzyme on to the NiO matrix and its high electrocatalytic activity, the prepared biosensor exhibits a high sensitivity of 0.1 mA (mM⁻¹-cm⁻²) and a good linearity from 25 to 300 mg dL⁻¹ of glucose concentration with fast response time of 5 s. Various functional properties of the material (mobility, crystallinity and stress) are found to influence the charge communication feature of NiO thin film matrix to a great extent, resulting in enhanced sensing response characteristics.     

Multicommutated flow system for the determination of glucose in honey with immobilized glucose oxidase reactor and spectrophotometric detection

A new automated method for the determination of glucose in honey is proposed. The method is based on multicommutated flow analysis (MCFA) and employs an immobilized glucose oxidase reactor and spectrophotometric detection at 505 nm of the red quinoneimine formed (Trinder's method).The calibration curve obeyed a second order equation in the range 0-0.14 g L⁻¹ (h = −2.2199 C² + 1.3741C + 0.0077, r² = 0.9991, where h is the peak height (absorbance) and C the concentration in g L⁻¹). The method was validated analyzing eight commercial samples, both by the AOAC 954.11 and 977.20 official methods. According to Student's t-test of mean values, at the confidence level of 95% the results obtained with the proposed method were in agreement with those obtained by the official methods. Precision (s_r(%), n = 10) was 3% and the sampling frequency of the system was 20 samples h⁻¹.     

Preparation and characterization of Prussian blue nanowire array and bioapplication for glucose biosensing

Prussian blue nanowire array (PBNWA) was prepared via electrochemical deposition with polycarbonate membrane template for effective modification of glassy carbon electrode. The PBNWA electrode thus obtained was demonstrated to have high-catalytic activity for the electrochemical reduction of hydrogen peroxide in neutral media. This enabled the PBNWA electrode to show rapid response to H₂O₂ at a low potential of −0.1 V over a wide range of concentrations from 1 × 10⁻⁷ M to 5 × 10⁻² M with a high sensitivity of 183 μA mM⁻¹ cm⁻². Such a low-working potential also substantially improved the selectivity of the PBNWA electrode against most electroactive species such as ascorbic acid and uric acid in physiological media. A detection limit of 5 × 10⁻⁸ M was obtained using the PBNWA electrode for H₂O₂, which compared favorably with most electroanalysis procedures for H₂O₂. A biosensor toward glucose was then constructed with the PBNWA electrode as the basic electrode by crosslinking glucose oxidase (GOx). The glucose biosensor allowed rapid, selective and sensitive determination of glucose at −0.1 V. The amperometric response exhibited a linear correlation to glucose concentration through an expanded range from 2 × 10⁻⁶ M to 1 × 10⁻² M, and the response time and detection limit were determined to be 3 s and 1 μM, respectively.