Fabrication of highly ordered CuInSe2 films with hollow nanocones for anti-reflection

Highly ordered CuInSe₂ films with hollow nanocones were fabricated by electron beam evaporation and nanospheres lithograph. From the AFM analyses, polystyrene nanospheres with diameter of 220 nm are assembled regularly on glass substrates. After reaction ion etching under different powers and residues removal, different and new surface morphologies of substrates have been obtained, such as smooth nanocones and hollow nanocones. The diffuse reflection spectra demonstrate that films on the substrates with periodic nanopatterned structure have less reflection over wavelengths ranged from 200 nm to 2500 nm due to light trapping. Especially, reflection for hollow nanocone arrays has the larger suppression value than nanocone-patterned films, which proves that surface pattern of hollow nanocones has better anti-reflection effect. Furthermore, while hollow depth increases from 6 nm to 9 nm, its optical antireflective effect becomes remarkable. These results could yield new options for solar-cell design with higher energy conversion efficiency.     

Controlled synthesis of cuprous oxide nanospheres and copper sulfide hollow nanospheres

Uniform Cu₂O nanospheres have been successfully synthesized by reducing CuSO₄ with ascorbic acid in sucrose solution at room temperature. The diameter of the Cu₂O nanospheres can be tuned from 90 to 280 nm by adding different amounts of sucrose in the solution. Furthermore, CuS hollow nanospheres with different diameters have been obtained based on the Kirkendall effect using the as-prepared Cu₂O nanospheres as sacrificial templates. Cu₂O/Cu_7.2S₄ core/shell nanospheres and Cu_7.2S₄ hollow nanospheres are obtained as the intermediate products at different stages of the conversion process. Through the post-treatment of sodium citrate solution, Cu_7.2S₄ hollow nanospheres can be changed into CuS hollow nanospheres. The products are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and field-emission scanning electron microscopy (FESEM). Optical properties of the products have also been studied.     

Controlling the morphology and size of CuO nanostructures with synthesis by solvo/hydrothermal method without any additives

CuO nanostructures at different morphologies were synthesized in controlled manner using a simple low-temperature solvothermal technique. Controlling the pH of content the reaction mixture, nanoparticles, nanorods and nanocloud CuO structures were synthesized at temperature of 100-150 °C with excellent reproducibility. High-resolution electron microscopy revealed the well crystalline nature of all the nanostructures with preferential growth along the [0 0 2] direction for linear structures. Photoluminescence spectrum of the as-grown nanostructures revealed oxygen-vacancy-related defects in them. The average sizes of NP-CuO (nanoparticles of CuO) at different morphologies were between 40 and 100 nm. The structure, morphology and size of NP-CuO were determined by X-ray diffraction powder (XRD), scanning electron microscopy (SEM), solid state Photo Luminescent (PL) and EDAX analysis.     

Supercritical carbon dioxide-assisted preparation of palladium nanoparticles on cyclotriphosphazene-containing polymer nanospheres

Poly(cyclotriphosphazene-co-4,4′-sulfonyldiphenol) (PZS) nanospheres with average diameter of 410 nm were synthesized rapidly at room temperature and then homogeneously decorated with Pd nanoparticles through an inorganic reaction in supercritical carbon dioxide-ethanol solution using PdCl₂ as a metal precursor. The resultant Pd/PZS nanocomposites were morphologically and structurally characterized by means of scanning electron microscopy, transmission electron microscope equipped with energy-dispersive X-ray spectroscopy, and X-ray diffraction techniques. Characterization results showed that the Pd nanoparticles with good dispersibility could be well anchored onto the surfaces of the PZS nanospheres and the size of Pd nanoparticles could be controlled easily by varying the ethanol-reduction time.     

Synthesis of magnetic hollow silica using polystyrene bead as a template

In this paper, we report a new route to synthesize novel magnetic hollow silica nanospheres (MHSNs) using polystyrene particles as sacrificial templates, and TEOS and Fe₃O₄ as precursors. TEM, EDS, XRD, and SQUID were applied to characterize MHSNs. TEM and EDS results show that the MHSNs consist of about 200 nm of hollow cores and ∼35 nm shells with ∼10 nm of Fe₃O₄ nanoparticles embedded. The polystyrene beads were successfully removed by immersing the as-prepared silica nanocomposite in a toluene solution. XRD results demonstrate that the Fe₃O₄ magnetic nanoparticles still keep spinel structure even heated at low temperature. The surface status of the polystyrene beads and Fe₃O₄ nanoparticles has an important effect on the formation of the MHSNs. The MHSNs present a superparamagnetism at room temperature by SQUID measurement. The MHSNs have potential applications in biosystem and nanomedicine.     

Solvothermal synthesis and characterization of CdSe nanocrystals with controllable phase and morphology

Zinc blende (ZB) CdSe hollow nanospheres were solvothermally synthesized from the reaction of Cd(NO₃)₂·4H₂O with a homogeneously secondary Se source, which was first prepared by dissolving Se powder in the mixture of ethanol and oleic acid at 205 °C. As Se power directly reacted with Cd(NO₃)₂·4H₂O in the above mixed solvents, wurtzite (W) CdSe solid nanoparticles were produced. Time-dependent experiments suggested that the formation of CdSe hollow nanospheres was attributed to an inside-out Ostwald ripening process. The influences of reaction time, temperature and ethanol/oleic acid volume ratio on the morphology, phase and size of the hollow nanospheres were also studied. Infrared (IR) spectroscopy investigations revealed that oleic acid with long alkene chains behaved as a reducing agent to reduce Se powder to Se²⁻ in the synthesis. Photoluminescence (PL) measurements showed that the ZB CdSe hollow nanospheres presented an obvious blue-shifted emission by 42 nm, and the W CdSe solid nanoparticles exhibited a band gap emission of bulk counterpart.     

Pyridine-thermal synthesis and high catalytic activity of CeO2/CuO/CNT nanocomposites

Carbon nanotubes (CNTs) were controllably coated with the uninterrupted CuO and CeO₂ composite nanoparticles by a facile pyridine-thermal method and the high catalytic performance for CO oxidation was also found. The obtained nanocomposites were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction as well as X-ray photoelectron spectroscopy. It is found that the CuO/CeO₂ composite nanoparticles are distributed uniformly on the surface of CNTs and the shell of CeO₂/CuO/CNT nanocomposites is made of nanoparticles with a diameter of 30-60 nm. The possible formation mechanism is suggest as follows: the surface of CNTs is modified by the pyridine due to the π-π conjugate role so that the alkaline of pyridine attached on the CNT surface is more enhanced as compared to the one in the bulk solvent, and thus, these pyridines accept the proton from the water molecular preferentially, which result in the formation of the OH⁻ ions around the surface of CNTs. Subsequently, the metal ions such as Ce³⁺ and Cu²⁺ in situ react with the OH⁻ ions and the resultant nanoparticles deposit on the surface of CNTs, and finally the CeO₂/CuO/CNT nanocomposites are obtained. The T₅₀ depicting the catalytic activity for CO oxidation over CeO₂/CuO/CNT nanocomposites can reach ∼113 °C, which is much lower than that of CeO₂/CNT or CuO/CNT nanocomposites or CNTs.     

Magnetodielectric effect in composites of nanodimensional glass and CuO nanoparticles

Nanocomposites comprising CuO particles of average diameter 21 nm coated with 5 nm silica glass containing iron ions were synthesized by a chemical route. An ion exchange reaction at the nanoglass/CuO interface produced iron-doped CuO with copper ion vacancies within the nanoparticles. Room temperature ferromagnetic-like behavior was observed in the nanocomposites. This was ascribed to uncompensated spins contributed by Fe ions with associated copper ion vacancies. A rather high value of magnetodielectric parameter in the range 16–26% depending on the measuring frequency was exhibited by these nanocomposites at a magnetic field of 10 KOe. This was caused by a magnetoresistance of 33% in the iron doped CuO nanoparticles. The experimental results were fitted to the Maxwell–Wagner Capacitor model developed by Catalan. These materials will be suited for magnetic sensor applications.     

Growth of nanocrystalline CuIn3Se5 (OVC) thin films by ion exchange reactions at room temperature and their characterization as photo-absorbing layers

Nanocrystalline CuIn₃Se₅ thin films have been grown on ITO glass substrates using chemical ion exchange reactions with CdS, in alkaline medium at pH 11. The as-deposited films were annealed in air at 200 °C for 30 min and characterized using X-ray diffraction (XRD), transmission electron microscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy, and scanning electron microscopy to study the structural, compositional and morphological properties. The XRD patterns reveal the nanoparticles size to be of 18-20 nm diameter, while from the SEM images the nanoparticles size is estimated to be 20-30 nm. It is observed that the annealed films contain nanocrystallites connected with each other through grain boundaries, with grain size of about 100-125 nm and have an overall n-type electrical conductivity and higher photoconductivity. The current-voltage (I-V) characteristics (in dark and light) of these films indicated the formation of a Schottky like junction between the n-CuIn₃Se₅ (OVC) and CdS/ITO layers.     

Only Ku-band microwave absorption by Fe3O4/ferrocenyl-CuPc hybrid nanospheres

A novel kind of hybrid nanospheres made of Fe₃O₄ and ferrocenyl-CuPc (FCP) was prepared via effective solvothermal method and performed microwave absorptivity only in Ku-band with minimum reflection loss of −25 dB at 16.0 GHz corresponding to absorbing about 99.7% content of microwave. Scanning electron microscopy images indicated that the nanospheres with uniform particle size distribution have the average diameter of 135 nm. Due to the synergistic reaction between magnetic ferrocenyl-CuPc and Fe₃O₄, the hybrid nanospheres showed novel electromagnetic properties. The real part of complex permittivity of hybrid nanospheres remains stable in the range of 0.5–12.0 GHz and has a large fluctuation at 16.5 GHz. Moreover, the dielectric loss of hybrid nanospheres also appeared a sharp peak at 16.3 GHz with the value of 2.7. The specific gravity of hybrid nanospheres is about 2.08. On the basis of these results, the novel hybrids are believed to have potential applications in the microwave absorbing area in Ku-band.     

Synthesis and formaldehyde sensing performance of LaFeO3 hollow nanospheres

Metal oxide semiconductors with hollow structure and morphology have attracted considerable attentions because of their promising application on gas sensors. In this paper, LaFeO₃ hollow nanospheres have been prepared by using carbon spheres as templates in combination with calcination. Based on the observation of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and transmission electron microscope (TEM), the structure and morphology of the products were characterized. It has been revealed that as-prepared LaFeO₃ samples have a uniform diameter of around 300 nm and hollow structures with thin shells of about 30 nm consisting of numerous nanocrystals and nanopores. Owing to the hollow and porous structure, large surface area and more surface active sites, the sensor based on LaFeO₃ hollow nanospheres exhibited high response, good selectivity and stability to formaldehyde gas (HCHO). It suggests that the as-prepared LaFeO₃ hollow nanospheres are promising candidates for good performance formaldehyde sensor.     

Synthesis of lanthanum nickelate perovskite nanotubes by using a template-inorganic precursor

A new route to obtain metal oxide nanotubes is presented: an inorganic coordination complex precursor containing the metal ions and impregnated into alumina membrane templates yield hollow tubular nanostructures of LaNiO₃ by calcination at 600 °C as characterized by powder X-ray diffraction (XRD). Scanning electron microscopy (SEM) shows that the resulting nanotubes have 200 nm in diameter in good agreement with the template pore. Transmission electron microscopy (TEM) and dark field transmission electron microscopy (DF-TEM) show that the nanotubes with 10-20 nm walls and internal separations are composed of 3-5 nm crystals.     

A self-generated template route to hollow carbon nanospheres in a short time

A self-generated template route was reported to prepare hollow carbon nanospheres. The hollow spheres were obtained through the direct pyrolysis of ferrocene for 1 h. The external diameter of the hollow carbon nanospheres was 50-150 nm and the thickness of the wall was about 15 nm. A possible formation mechanism of the hollow carbon nanospheres was discussed.     

A room-temperature approach to boron nitride hollow spheres

Boron nitride hollow spheres were synthesized by the reaction of BBr₃ and NaNH₂ at room temperature; X-ray powder diffraction pattern could be indexed as hexagonal BN with the lattice constants of a=2.482 and c=6.701 Å; high-resolution transmission electron microscopy image showed the hollow spheres consisted of BN nanoparticles, with diameter between 80 and 300 nm; a possible formation mechanism of BN hollow spheres was discussed.     

Fabrication and characterization of CuO-core/TiO2-shell one-dimensional nanostructures

We have fabricated CuO-core/TiO₂-shell one-dimensional nanostructures by coating the CuO nanowires with MOCVD-TiO₂. The structure of the core/shell nanowires has been investigated by using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction analysis techniques. The CuO-cores and the TiO₂-shells of the as-synthesized nanowires have been found to have crystalline monoclinic CuO and crystalline tetragonal anatase TiO₂ structures, respectively. The CuO-core/TiO₂-shell nanowires are winding and has rougher surface, whereas the CuO nanowires are straight and have smoother surface.Influence of the substrate temperature and the growth time on the structure such as the morphology, size, and crystallographic orientation of CuO nanowires synthesized by thermal oxidation of Cu foils have also been investigated. All the nanowires have only the CuO phase synthesized at 600 °C, whereas those synthesized at 400 °C have both CuO and Cu₂O phases. The highest density of CuO nanowires with long thin straight morphologies can be obtained at 600 °C. In addition, the growth mechanism of the CuO nanowires has been discussed.     

Versatile synthesis of rectangular shaped nanobat-like CuO nanostructures by hydrothermal method; structural properties and growth mechanism

This paper describes a simple and versatile method for growing highly anisotropic rectangular shaped nanobat-like CuO nanostructures by simple, low temperature and cost effective hydrothermal method. Field emission scanning electron microscopy illustrated that these CuO nanostructures have diameter of ∼70 nm, thickness of ∼8 nm and length of ∼174 nm. Structural analysis reveals that the CuO nanostructures have a high crystal quality with monoclinic crystal structure. X-ray photoelectron spectroscopy studies demonstrate that the sample is composed of CuO. The Raman study also indicates the single phase property and high crystallinity of as-grown CuO nanostructures. The plausible growth mechanism for the formation of nanobat-like CuO structure is proposed.     

Simple routes to synthesis and characterization of nanosized tin telluride compounds

Nanosized tin telluride compounds were prepared by chemical reduction process and hydrothermal methods. The nanosized SnTe compounds were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The SnTe nanoalloy prepared by chemical reduction process presented quasi-spherical morphology with aggregation. The sizes of particle were 40-50 nm. The powder prepared by hydrothermal process was nearly nanospheres, and the particle sizes were 30-40 nm with narrow distribution. The effect of capping agent, reductant sort, and reaction temperature on the morphology, the particle sizes and the phase of SnTe alloys have been investigated. Experimental results indicated that N₂H₄·H₂O plays a crucial role in the formation of nanosized rode-like SnTe compounds.     

Copper nanoparticles grown under hydrogen: Study of the surface oxide

Copper nanoparticles with sizes between 10 nm and 50 nm were grown by condensation in hydrogen at pressures from 10 Pa to 1200 Pa. The crystallite size ranged from 10 nm to 25 nm using the Scherrer method. X-ray diffraction showed the reflections of metallic copper occasionally mixed with an oxidized phase (CuO or Cu₂O). As shown by TEM examination, the smaller particles that did not exceed 25 nm exhibited faceted morphologies whereas the bigger ones had ovaled-spherical forms sometimes containing twins. X-ray photoelectron spectroscopy revealed that the nanoparticles consist of a copper core, completely surrounded by a Cu₂O shell, which is oxidized to CuO at the surface layer.     

Hydrothermal synthesis of LiMnO2 microcubes for lithium ion battery application

Two kinds of LiMnO₂ microcubes were successfully synthesized by hydrothermal method using solid or hollow Mn₂O₃ microcubes as precursors. One was made up of nanoparticles varying in size and the other was made up of interlaced polygonal nanoplates with the thickness of 70 nm. Both kinds of LiMnO₂ microcubes were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Charge–discharge curves were carried out to investigate their electrochemical properties. LiMnO₂ microcubes with interlaced nanoplates showed much better capacities than the ones with nanoparticles indicating it is more suitable for application in the lithium ion batteries. The former material could deliver the capacities of 197 and 134 mAh/g at 0.1 and 1 C, respectively. And its capacity fading after 50 cycles did not exceed 7 %. The excellent electrochemical performance of the former material could be ascribed to the smaller size which could shorten the path length for lithium ion transport and increase the electrode and electrolyte contact.     

One-step synthesis of Fe3O4@C/reduced-graphite oxide nanocomposites for high-performance lithium ion batteries

In this paper, we propose a facile one-step strategy to prepare Fe₃O₄@amorphous carbon/reduced graphite oxide nanocomposites (FCRGs) under hydrothermal conditions. A transmission electron microscopy image has shown that the as-formed Fe₃O₄ nanoparticles coated with a layer of amorphous carbon are wrapped by reduced graphite oxide (r-GO) sheets. The diameter of Fe₃O₄ nanoparticles is less than 50 nm. N₂ adsorption/desorption isotherms indicate that the specific surface area of FCRG is 31.6 m²/g with porous structure. FCRG exhibits improved cycling stability and rate performances as a potential anode material for high-performance lithium ion batteries.