An efficient and economical synthesis of 5-substituted 1H-tetrazoles via Pb(II) salt catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple, mild and efficient method is developed for the synthesis of 5-substituted 1H-tetrazoles. Out of three used Pb(II) catalysts, lead chloride (PbCl₂) has been found to be an efficient catalyst for [3+2] cycloaddition of NaN₃ with aromatic and aliphatic nitriles to afford 5-substituted 1H-tetrazoles. The catalyst is reusable up to four cycles with consistent activity. The cost effectiveness and easy availability of the catalyst, simple methodology, excellent yield and easy work-up are the additional advantages.     

An efficient synthesis of 5-substituted 1H-tetrazoles via B(C6F5)3 catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazole derivatives from various nitriles and sodium azide (NaN₃) via [3+2] cycloaddition reaction using B(C₆F₅)₃ as a catalyst. The present synthetic method displayed significant advantages such as low catalyst loading, mild reaction conditions, low toxicity, easy work-up, high yields, and compatibility with other functional groups.     

Rhodium(I)-Catalyzed Three-Component [4+2+1] Cycloaddition of Two Vinylallenes and CO

Transition metal-catalyzed [4+2+1] reactions of dienes (or diene derivatives such as vinylallenes), alkynes/alkenes, and CO (or carbenes) are expected to be the most straightforward approach to synthesize challenging seven-membered ring compounds, but so far only limited successes have been realized. Here, an unexpected three-component [4+2+1] reaction between two vinylallenes and CO was discovered to give highly functionalized tropone derivatives under mild conditions, where one vinylallene acts as a C₄ synthon, the other vinylallene as a C₂ synthon, and CO as a C₁ synthon. It was proposed that this reaction occurred via oxidative cyclization of the diene part of one vinylallene molecule, followed by insertion of the terminal alkene part of the allene moiety in another vinylallene, into the Rh−C bond of five-membered rhodacycle. Then, CO insertion and reductive elimination gave the [4+2+1] cycloadduct. Further experimental exploration of why ene/yne-vinylallenes and CO gave monocyclic tropone derivatives instead of 6/7-bicyclic ring products were reported here.     

Asymmetric Synthesis of Spiropyrazolones through Phosphine‐Catalyzed [4+1] Annulation

An enantioselective synthesis of spiropyrazolones from allenoate‐derived MBH acetates and pyrazolones through a phosphine‐mediated [4+1] annulation process has been developed. Spiropyrazolones were readily prepared in good chemical yields and good to high enantioselectivities. This is the first asymmetric example in which α‐substituted allenoates were utilized as a C₄ synthon for phosphine‐catalyzed [4+1] annulation.     

Synthesis of benzyl halide derivatives of spirohydantoins via [2+2+2] cyclotrimerization reaction

Generally, synthesis of hydantoin derivatives involve use of carbonyl compounds which in turn require multistep synthesis. Here, we report a new approach to assemble spirohydantoins via [2+2+2] cyclotrimerization reaction using commercially available, inexpensive hydantoin as a starting material.     

Co(II), Ni(II) and Cu(II) complexes of new [1+1] and [2+2] macrocyclic ligands derived from 1,4-bis(2′-formylphenyl)-1,4-dioxabutane and cis-1,2-diaminocyclohexane

Two new macrocyclic ligands, L¹ (14-membered N₂O₂) and L² (28-membered N₄O₄) from [1+1] and [2+2] condensation, respectively, have been obtained in a one-pot synthesis starting from 1,4-bis(2′-formylphenyl)-1,4-dioxabutane and cis-1,2-diaminocyclohexane.     

Synthesis of substituted imidazolines via [3+2]-cycloaddition of aziridines with nitriles

An efficient synthesis of 2,4-disubstituted 1H-imidazolines from aziridines and nitriles in the presence of BF₃-Et₂O or triethyloxonium tetrafluoroborate has been described. The reaction proceeds via a [3+2]-cycloaddition reaction. Most of the nitriles successfully underwent cycloaddition reactions with aziridines even at room temperature in a very short time.     

Synthesis of Phosphabenzenes by an Iron‐Catalyzed [2+2+2] Cycloaddition Reaction of Diynes with Phosphaalkynes

A method for the synthesis of phosphabenzenes under iron catalysis is described. Thus, the FeI₂‐catalyzed [2+2+2] cycloaddition of diynes with phosphaalkynes in m‐xylene gave a variety of phosphabenzenes in good to high yields (up to 87 % yield).     

A highly diastereoselective [3+3] annulation reaction of aza-oxyallyl cations and nitrones

An efficient synthesis of 1,2,4-oxadiazinan-5-ones via [3+3] cycloaddition of in situ generated aza-oxyallyl cations with nitrones has been developed. The protocol features easy operation, excellent yields, excellent diastereo-control, broad substrate scope and good functional group tolerance.     

Synthesis of novel N-aryl-N-(1H-tetrazol-5-yl)benzenesulfonamides in water

N-Aryl-N-(1H-tetrazol-5-yl)benzenesulfonamides were synthesized via an eco-friendly protocol using ZnBr₂-catalyzed [2 + 3] cycloaddition reaction of N-cyano-N-arylbenzenesulfonamides and sodium azide under reflux conditions in water. The products were obtained in excellent yields via an easy work-up procedure.     

Silica supported lanthanum triflate mediated synthesis of 5-substituted-1H tetrazoles

Silica supported lanthanum triflate (Ln(OTf)₃-SiO₂) promoted synthesis of 5-substituted 1H-tetrazoles via [3+2] cycloaddition between aromatic/heteroaromatic nitriles and sodium azide is a high product yielding, facile, and straightforward procedure. Non toxicity, recovery, and reusability for three continuous cycles are the noteworthy features of the currently employed heterogeneous catalyst.     

CuFe2O4 nanoparticles: a magnetically recoverable and reusable catalyst for the synthesis of 5-substituted 1H-tetrazoles

An efficient and economical protocol for the synthesis of 5-substituted 1H-tetrazoles from various nitriles and sodium azide is described using magnetically recoverable and reusable CuFe₂O₄ nanoparticles. A wide variety of aryl nitriles underwent [2+3] cycloaddition under mild reaction conditions to afford tetrazoles in good to excellent yields. The catalyst was magnetically separated and reused five times without significant loss of catalytic activity.     

A facile synthesis of isoindolo[2,1-a]quinolin-11-one via [4+2] reactions of N-acyliminium intermediates with olefines

A facile synthesis of isoindolo[2,1-a]quinolin-11-one has been developed to attain new molecules of this family via [4+2] reactions of N-acyliminium cation, produced from 2,3-dihydro-3-hydroxy-2-arylisoindol-1-one, in the presence of BF₃·OEt₂ with olefins in moderate to good yields at ambient temperature.     

Expeditious synthesis of cis-1-methyl-2,3,3a,4,5,9b-hexahydro-1H-pyrrolo-[3,2h]isoquinoline/[2,3-f]quinoline via azomethine ylide-alkene [3+2] cycloaddition

Expeditious syntheses of cis-1-methyl-2,3,3a,4,5,9b-hexahydro-1H-pyrrolo-[3,2h]isoquinoline/[2,3-f]quinoline have been developed. The syntheses started with commercially available materials and afforded excellent overall yields in straightforward steps. Intramolecular azomethine ylide-alkene [3+2] cycloaddition is the key step in the construction of these pyrroloisoquinoline and pyrroloquinoline scaffolds. This route is much more atom-economic than those reported in the literature and is appropriate for scale-up synthesis.     

Tandem [4 + 2]/[2 + 2] cycloaddition of o-carboryne with enynes: facile construction of carborane-fused tricyclics

o-Carboryne (1,2-dehydro-o-carborane) is a very useful synthon for the synthesis of a variety of carborane-functionalized molecules. With 1-Li-2-OTf-o-C₂B₁₀H₁₀ as the precursor, o-carboryne undergoes an efficient [4 + 2] cycloaddition with various conjugated enynes, followed by a subsequent [2 + 2] cycloaddition at room temperature, generating a series of carborane-fused tricyclo[6.4.0.0^2,7]dodeca-2,12-dienes in moderate to high isolated yields. This reaction is compatible with many functional groups and has a broad substrate scope. A reactive carborane-fused 1,2-cyclohexadiene intermediate is involved, which is supported by experimental results and DFT calculations. This protocol offers a convenient strategy for the construction of complex carborane-functionalized tricyclics.

An unprecedented tandem [4 + 2]/[2 + 2] cycloaddition of o-carboryne with enynes has been disclosed for the efficient synthesis of various carborane-fused tricyclics, in which a reactive carborane-fused 1,2-cyclohexadiene intermediate is involved.     

Facile synthesis of novel CF3-substituted ring-fused furo[2,3-c]pyrazoles through Rh2(OAc)4 catalyzed [3+2] cycloaddition of 4-diazo-1-phenyl-3-(trifluoromethyl)-1H-pyrazol-5(4H)-one with aromatic alkynes

The Rh₂(OAc)₄ catalyzed [3+2] cycloaddition of 4-diazo-1-phenyl-3-(trifluoromethyl)-1H-pyrazol-5(4H)-one with aromatic alkynes was studied, and this protocol can be efficiently applied to the synthesis of the novel CF₃-substituted ring-fused furo[2,3-c]pyrazoles.     

Bulk Mn2+ Doped 1D Hybrid Lead Halide Perovskite with Highly Efficient,Tunable and Stable Broadband Light Emissions

Mn²⁺ doped colloidal three-dimensional (3D) lead halide perovskite nanocrystal (PNC) has attracted intensive research attention; however, the low exciton binding energy and fatal optical instability of 3D PNC seriously hinder the optoelectronic application. Therefore, it remains significant to explore new stable host perovskite with strongly bound exciton to realize more desirable luminescent property. In this work, we utilized bulk one-dimensional (1D) hybrid perovskite of [AEP]PbBr₅ ⋅ H₂O (AEP=N-aminoethylpiperazine) as structural platform to rationally optimize the luminescent property by a controllable Mn²⁺ doping strategy. Significantly, the series of Mn²⁺-doped 1D [AEP]PbBr₅ ⋅ H₂O show enhanced energy transfer efficiency from the strongly bound excitons of host material to 3d electrons of Mn²⁺ ions, resulting in tunable broadband light emissions from weak yellow to strong red spectral range with highest photoluminescence quantum yield up to 28.41 %. More importantly, these Mn²⁺-doped 1D perovskites display ultrahigh structural and optical stabilities in humid atmosphere, water and high temperature exceeding the conventional 3D PNC. Combined highly efficient, tunable and stable broadband light emissions enable Mn²⁺-doped 1D perovskite as excellent down-converting phosphor showcasing the potential application in white light emitting diode. This work not only provides a profound understanding of low-dimensional perovskites but also opens a new way to rationally design high-performance broadband light emitting perovskites for solid-state lighting and displaying devices.     

Reactivity of allenoates toward aziridines: [3+2] and formal [3+2] cycloadditions

The reactivity of buta-2,3-dienoates toward aziridines is reported. Allenoates react as 2π-component in the [3+2] cycloaddition with the azomethine ylide generated from cis-1-benzyl-2-benzoyl-3-phenylaziridine affording 4-methylenepyrrolidines in a site-, regio-, and stereoselective fashion. Under conventional thermolysis, cis- and trans-2-benzoyl-1-cyclohexyl-3-phenylaziridines showed a different reactivity. These aziridines participate in formal [3+2] cycloadditions with allenes via C-N bond cleavage of the three-membered ring leading to functionalized pyrroles.     

Unexpected Ti-catalyzed formal intramolecular [4+4] cycloaddition of 1,1′-bi[(S,S)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl]

Reductive disilylation (Li+Me₃SiCl−THF) of 1,3,5-cycloheptatriene led to 1,1′-bi[(S^∗,S^∗)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl] (2). In the presence of TiCl₄ in dichloromethane, 2 gave rise to a spherical molecule 5 resulting from an intramolecular formal [4+4] supra-supra cycloaddition.     

过渡金属催化[2 + 2 + 2]环加成反应合成吡啶衍生物

环加成反应可以一步同时构建多个化学键,是目前国内外研究最为活跃的领域之一。相比于传统方法,过渡金属催化的[2+2+2]环加成反应是合成吡啶衍生物的有效手段。本文从反应机理、非手性吡啶化合物合成和手性吡啶化合物合成三个方面阐述了近年来吡啶衍生物的研究情况,涉及Co、Rh、Ru、Fe、Ni、Ti等金属催化体系。