Cycloaddition of epoxide and CO2 to cyclic carbonate catalyzed by VO(IV) porphyrin

The cycloaddition of epoxide and CO₂ to synthesize cyclic carbonate catalyzed by VO(IV) porphyrin was achieved under 1.4 MPa at 150°C. The effects of reaction temperature, time, CO₂ pressure, co‐catalyst and porphyrin framework were investigated. The catalytic results showed that moderate to high yields of cyclic carbonates were obtained under the optimal reaction conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

氨基酸盐酸盐催化二氧化碳与环氧化物的环化反应

利用氨基酸盐酸盐作为催化剂,二氧化碳可以和环氧化物发生偶联反应,高产率和高选择性地生成环状碳酸酯,详细研究了反应条件如二氧化碳压力,反应温度,时间及催化剂用量对反应的影响。     

Titanocene dichloride/KI: an efficient catalytic system for synthesis of cyclic carbonates from epoxides and CO2

Titanocene dichloride (Cp₂TiCl₂)/KI was developed to be an efficient catalytic system for the cycloaddition of CO₂ to epoxides to synthesize relevant cyclic carbonates from epoxides and CO₂. Various influencing factors on the coupling reaction, such as co‐catalyst, temperature, CO₂ pressure and reaction time, were investigated. The optimal reaction conditions were KI as co‐catalyst, 150 °C reaction temperature, 12 atm CO₂ pressure and 4 h reaction time using THF as solvent for the synthesis of propylene carbonate in 98% yield. Copyright © 2013 John Wiley & Sons, Ltd.     

聚合物负载季鏻盐催化 CO2 与环氧化物的环加成反应

 制备了聚合物负载的季鏻盐催化剂, 并用于 CO₂ 与环氧氯丙烷环加成反应中. 采用红外光谱、热分析、原子吸收光谱和扫描电子显微镜等手段测定了催化剂的结构、热性能、磷元素含量和表面形貌等. 考察了 CO₂ 压力、温度、催化剂用量和反应时间等对环加成反应性能的影响. 结果表明, 在催化剂用量为 0.09 g, CO₂ 压力为 4.5 MPa, 于 150 ^oC 反应 6 h 时, 3-氯甲基环碳酸酯收率可达 97.7%, 选择性大于 99%. 且催化剂易分离回收, 重复使用 5 次后产物收率和选择性没有明显下降. 同时探讨了该催化剂上 CO₂ 环加成合成环碳酸酯的可能机理.     

Cyclic carbonate synthesis from epoxides and CO2 over cyanocobalamin/n‐Bu4NI

The synthesis of cyclic carbonates from epoxides and carbon dioxide catalyzed by cyanocobalamin and n‐Bu₄NI system was achieved under 0.8 MPa CO₂ pressure at 140°C without organic solvents. Propylene carbonate was obtained in 99% yield within 6 h under the optimized reaction conditions. The cyanocobalamin catalyst could be recycled with water and retained moderate catalytic activity. Copyright © 2012 John Wiley & Sons, Ltd.     

N-heterocyclic carbene catalyzed cyanation reaction of carbonyl compounds with ethyl cyanoformate and acetyl cyanide

N-heterocyclic carbene (NHC) has been employed as an efficient catalyst for cyanation reaction of carbonyl compounds. Under catalysis of 1 mol % NHCs, various aldehydes and 2,2,2-trifluoroacetophenone coupled with ethyl cyanoformate in THF to provide cyanohydrins ethyl carbonates in excellent yields. While in the presence of 10 mol % catalyst, different types of aldehydes and 2,2,2-trifluoroacetophenone reacted with acetyl cyanide in dichloroethane to give acylated cyanohydrins in moderate to high yields.     

Significant rate acceleration in carbonate synthesis from carbon dioxide and oxiranes using dimethyl carbonate as a recyclable medium

The synthesis of cyclic carbonates by the reaction of oxiranes and carbon dioxide in the presence of catalytic amount of tetrabutylammonium bromide in dimethylcarbonate without any metal catalyst is reported. Significant rate acceleration in the reaction is observed in dimethylcarbonate as compared to the other solvents. Under the reaction conditions of 100 °C and 2.1 MPa in dimethyl carbonate, maximum conversion and selectivity is achieved. The dimethylcarbonate containing tetrabutylammonium bromide catalyst can be easily recovered and reused for at least six recycles with the same selectivity.     

Intramolecularly two-centered cooperation catalysis for the synthesis of cyclic carbonates from CO2 and epoxides

A catalyst system containing an electrophilic center and a sterically hindered nucleophilic center in one molecule was applied to the cycloaddition reaction of CO₂ and epoxides. This intramolecularly two-centered cooperation catalyst showed activity even at a high [epoxide]/[catalyst] ratio up to 50 000 under mild conditions such as solvent-free, ambient temperature, and low CO₂ pressure. The reaction of CO₂ with (S)-propylene oxide at 80 °C in the presence of the bifunctional catalyst gives (S)-propylene carbonate in 96% ee with retention of stereochemistry.     

A novel and efficient method for the catalytic direct oxidative carbonylation of 1,2- and 1,3-diols to 5-membered and 6-membered cyclic carbonates

In the presence of a PdI₂-based catalytic system, 1,2-diols undergo an oxidative carbonylation process to afford 5-membered cyclic carbonates in good to excellent yields (84-94%) and with unprecedented catalytic efficiencies for this kind of reaction (up to ca. 190 mol of product per mol of PdI₂). Under similar conditions, 6-membered cyclic carbonates are obtained for the first time through a direct catalytic oxidative carbonylation of 1,3-diols (66-74% yields).     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

Synthesis of cyclic carbonates from epoxides catalyzed by metal–BINOL complexes

Synthesis of cyclic carbonates from CO₂ and terminal epoxides catalyzed by Mg, Ca and In BINOL complexes was achieved without organic solvents. Effects of temperature, CO₂ pressure, reaction time and co‐catalyst on the cycloaddition were investigated. Propylene carbonate was obtained under a CO₂ pressure of 1.2 MPa within 10 hours in a yield of 98% catalyzed by Ca–BINOL at 120°C. The order of catalytic activity of the metal center is Ca > In > Mg. Copyright © 2014 John Wiley & Sons, Ltd.     

乙酸盐上二氧化碳和二醇合成环状碳酸酯

在乙腈体系中,以不同的乙酸盐作催化剂,研究了CO2与二醇合成环状碳酸酯的反应.乙腈在反应过程中不仅是溶剂,而且还起到了脱水剂的作用,促进了反应的进行.以1,2-丙二醇为反应物对催化剂进行筛选,发现无水乙酸锌具有最高的催化活性.在无水乙酸锌上考察了二氧化碳和不同二醇的反应,结果表明,五元环碳酸酯的产率明显高于六元环碳酸酯,其中碳酸丙烯酯的产率最高.以1,2-丙二醇为反应基质,无水乙酸锌为催化剂,确定了最佳反应条件,1,2-丙二醇100 mmol,乙睛10 mL,催化剂2.5 mmol,反应压力10 MPa,温度170 ℃,反应12 h.在此条件下,碳酸丙烯酯的产率达到了24.2%,1,2-丙二醇的转化率为38.9%.     

Ring opening of epoxides with alcohols using Fe(Cp)2BF4 as catalyst

Fe(Cp)₂BF₄ is an efficient catalyst for the alcoholysis of aromatic, aliphatic, and cyclic epoxides giving excellent yields of the corresponding β-alkoxy alcohols under ambient conditions. The methanolysis of styrene oxide using Fe(Cp)₂BF₄ as a catalyst (5 mol %) gave excellent yield of 2-methoxy-2-phenylethanol with complete regio-selectivity. The ring opening of cyclic epoxides gave 77–97% yields of trans-β-methoxy alcohols, in 0.5–6 h. The use of 1,2-epoxyhexane and 1,2-epoxydodecane as substrates gave both regioisomers in excellent yields. The first order rate of reaction with respect to catalyst was observed for the kinetics of ring opening of 1,2-epoxyhexane with methanol.     

Silver(I)‐Catalyzed Three‐Component Reaction of Propargylic Alcohols,Carbon Dioxide and Monohydric Alcohols: Thermodynamically Feasible Access to β‐Oxopropyl Carbonates

A silver(I)‐catalyzed three‐component reaction of propargylic alcohols, CO₂, and monohydric alcohols was successfully developed for the synthesis of β‐oxopropyl carbonates. As such, a series of β‐oxopropyl carbonates were exclusively produced in excellent yields (up to 98 %), even under atmospheric pressure of CO₂. The silver catalyst works efficiently for both the carboxylative cyclization of propargylic alcohols with CO₂ and subsequent transesterification of α‐alkylidene cyclic carbonates with monohydric alcohols; thus this tandem process performs smoothly under mild conditions. This work provides a versatile and thermodynamically favorable approach to dissymmetric dialkyl carbonates.     

Molybdenum oxide/bipyridine hybrid material {[MoO3(bipy)][MoO3(H2O)]}n as catalyst for the oxidation of secondary amines to nitrones

The inorganic-organic hybrid material {[MoO₃(bipy)][MoO₃(H₂O)]}_n (bipy = 2,2′-bipyridine) can be used as a water-tolerant catalyst for the oxidation of secondary amines under mild conditions using either urea hydrogen peroxide (UHP) or tert-butylhydroperoxide (TBHP) as the oxidant. Under optimized reaction conditions (2 mol % catalyst, 3-4 equiv TBHP, CH₂Cl₂ as the solvent, 40 °C), the corresponding nitrones were obtained with different efficiency depending on the nature of the cyclic or acyclic amine used.     

Chemical catalysed recycling of waste polymers: Catalytic conversion of polypropylene into fuels and chemicals over spent FCC catalyst in a fluidised-bed reactor

Polypropylene (PP) was pyrolysed over spent FCC commercial catalyst (FCC-s1) using a laboratory fluidised-bed reactor operating isothermally at ambient pressure. The influence of reaction conditions including catalyst, temperature, and ratio of polymer to catalyst feed and flow rates of fluidising gas was examined. The yield of gaseous and liquid hydrocarbon products at 390 °C for spent FCC commercial catalyst (87.8 wt%) gave much higher yield than silicate (only 17.1 wt%). Greater product selectivity was observed with FCC-s1 as a post-use catalyst with about 61 wt% olefins products in the C₃-C₇ range. The selectivity could be further influenced by changes in reaction conditions. Valuable hydrocarbons of olefins and iso-olefins were produced by low temperatures and short contact times used in this study. It is also demonstrated that a post-use catalyst system under appropriate conditions the resource potential of polymer waste can be economically recovered and also can address the recycling desire to see an alternative to solve a major environment problem.     

Effects of acid treatment on activated carbon used as a support for Rb and K catalyst for C2F5I synthesis and its mechanism

In the present work, the activated carbon (AC) support was treated with HCl, HNO₃ and HF solution. The order of catalyst dispersion was as follows: Rb-K/AC-HNO₃ > Rb-K/AC-HF > Rb-K/AC-HCl > Rb-K/AC. The same sequence was also observed for the amount of the acid surface oxygen groups on AC, but not for the basicity of the catalyst. The key role of acid treatment on AC surface chemistry and the basic sites, which are closely related to catalyst dispersion and basicity, is examined to rationalize these findings. On the other hand, a consideration of the reaction mechanism suggests that the reaction proceeds via CF₂ carbenes formed on the catalyst surface as intermediates, followed by carbine disproportionation to CF₃ radicals and CF₃CF₂ radicals, followed by reaction with I₂ to produce CF₃CF₂I, and it was also found that the Rb-K/AC-HCl catalyst with a high dispersion and moderate basicity was helpful for the enhancement of catalytic activity for C₂F₅I synthesis.     

Direct arylation of oxazole and benzoxazole with aryl or heteroaryl halides using a palladium-diphosphine catalyst

Through the use of PdCl(dppb)(C₃H₅) as a catalyst, a range of aryl bromides and chlorides undergoes coupling via C-H bond activation/functionalization reaction with oxazole or benzoxazole in good yields. This air-stable catalyst can be used at low loadings with several substrates. Surprisingly, better results in terms of substrate/catalyst ratio were obtained in several cases using electron-excessive aryl bromides than with the electron-deficient ones. This seems to be mainly due to the relatively low thermal stability of some of the 2-arylbenzoxazoles formed with electron-deficient aryl halides. With these substrates, in order to obtain higher yields of product, the reactions had to be performed at a lower temperature (100-120 °C) using a larger amount of catalyst. On the other hand, in the presence of the most stable products, the reactions were performed at 150 °C using as little as 0.2 mol% catalyst. Arylation of benzoxazole with heteroaryl bromides also gave the coupling products in moderate to high yields using 0.2-5 mol% catalyst. With this catalyst, electron-deficient aryl chloride such as 4-chlorobenzonitrile, 4-chloroacetophenone or 2-chloronitrobenzene have also been used successfully.     

Ir-catalyzed asymmetric allylic alkylation using chiral diaminophosphine oxides: DIAPHOXs. Formal enantioselective synthesis of (−)-paroxetine

An Ir-catalyzed asymmetric allylic alkylation using chiral diaminophosphine oxide is described. Asymmetric allylic alkylation of terminal allylic carbonates proceeded using 5 mol % of Ir catalyst, 5 mol % of DIAPHOX 1i, 10 mol % of NaPF₆, 10 mol % of LiOAc, and N,O-bis(trimethylsilyl)acetamide (BSA), affording the corresponding branched products in excellent yield and in up to 95% ee. The developed catalytic asymmetric reaction was successfully applied to a formal enantioselective synthesis of (−)-paroxetine.     

Pyridinium-functionalized metalloporphyrins as bifunctional catalysts for cycloaddition of epoxides and carbon dioxide

New pyridinium-functionalized metalloporphyrins MEtPpBr₄ (M = Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺; EtPp = 5, 10, 15, 20-tetra(4-(3-(N-ethyl-4-pyridyl)pyrazolyl)phenyl)porphyrin) were synthesized as bifunctional catalysts for the cycloaddition reactions of epoxides and CO₂. The effects of catalyst loading, CO₂ pressure, reaction temperature and time on catalytic activity were investigated. ZnEtPpBr₄ ( 1 ) and CoEtPpBr₄ ( 2 ) exhibited efficient activities in the cycloaddition reactions of various epoxides with CO₂ as at 120 °C under 2 MPa of CO₂ pressure without solvent. Most of corresponding cyclic carbonates could be obtained in almost quantitative yields and > 99.9% selectivity with molar ratio of epoxide/catalyst 2222 after 8 hr of reaction.