Mercury determination and speciation analysis in surface waters

A sorbent L-cysteine grafted silica gel has been evaluated for separation and enrichment of dissolved inorganic i-Hg(II) and methylmercury CH₃Hg(I) from surface waters at sub-μg L⁻¹ concentrations. Chemical parameters for mercury species enrichment and separation have been optimized. Analytical schemes for the determination of Hg species, using selective column solid phase extraction (SPE) with continuous flow chemical vapor generation atomic absorption spectrometry (CF-CVG-AAS) or inductively coupled plasma-mass spectrometry (ICP-MS) were developed. Possibilities for on-site SPE enrichment were demonstrated as well. The limits of quantification were 1.5 and 5 ng L⁻¹ for dissolved i-Hg(II) and CH₃Hg(I) by CF-CVG-AAS and 1 and 2.5 ng L⁻¹ by ICP-MS with relative standard deviations between 7–12% and 7–14%, respectively. The chemically modified SPE sorbent has demonstrated high regeneration ability, chemical and mechanical stability, acceptable capacity and good enrichment factors. Results for total dissolved mercury were in reasonable agreement with those from independent analyses by direct ICP-MS determinations for river waters and for estuarine water certified reference material.      

Photometric determination of aqueous cobalt (II), nickel (II), copper (II) and iron (III) with 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt in gelatin films

Photometric determination of aqueous Co(II), Cu(II), Ni(II) and Fe(III) was performed using indicator films prepared by immobilization of 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt (NRS) into hardened photographic film. Immobilization was based on electrostatic interaction of reagent and metal complexes with the gelatin. The isoelectric point pH of hardened gelatin (4.46±0.04) was evaluated by viscometry. Co(II), Fe(III), Ni(II) form 1:3 complexes with NRS in gelatin at pH 2 and Cu(II) forms 1:2 complexes. Their log β′ values were: Co-6.7, Fe-8.6, Cu-8.0, and Ni-6.4. The absorption maxima were: 370nm for NRS, and 430nm, 470nm, 495nm and 720nm for complexes of Co(II), Ni(II), Cu(II) and Fe(III). An algorithm for their simultaneous determination using the indicator films was developed. The detection limits were: c_lim(Co²⁺) = 0.45×10⁻⁵ M, c_lim(Fe³⁺) = 0.50×10⁻⁵ M, c_lim(Cu²⁺) = 0.67×10⁻⁵ M, c_lim(Ni²⁺) = 0.75×10⁻⁵ M,; and their sum c_lim(ΣMn⁺) = 0.82×10⁻⁵ M.      

Immobilization of quaternary ammonium salts on silica gel for perchlorate ions removal

Silica surface was modified with quaternary ammonium salts to give three matrices of different chain length. The synthesized supports were characterized by elemental analysis and infrared spectroscopy, as well as scanning electron microscopy and semi-empirical parametric method 5. Their exchange capacities for ClO₄ ⁻, F⁻, NO₃ ⁻ and CH₃COO⁻ ions were investigated by conductometric titration. The amount of exchanged chloride ions from the matrix was studied for different initial anions concentration. The functionalized silica gel showed very good ability of perchlorate ions exchange from the water solution in room temperature. The anion-exchange properties were also studied in comparison to different number of reactive sites in the matrices. The increased number of chloride at the silica surface took effect on increased ability of ClO₄ ⁻ anion exchange      

Density functional theory study of the photosensitization mechanisms of indigo

The triplet excited state properties and photosensitization mechanisms of indigo were investigated based on density functional theory calculations. The solvent effects on the photosensitization mechanisms of indigo have also been considered. The thermodynamic feasibility of the possible ¹O₂ and O₂·⁻-photogeneration pathways by triplet excited state indigo in different solvents was explored, in order to gain some deeper insights into the photosensitization characters of the dye.      

Metathesis transformations of unsaturated derivatives of β-diketones

Selected β-diketones bearing unsaturated derivatives have been demonstrated to undergo homo-metathesis and cross-metathesis with selected olefins in the presence of Grubbs catalysts. The reactions led to respective homo- and cross-metathesis products mainly with good yields and selectivities.      

Efficient and solvent-free synthesis of 1-amidoalkyl-2-naphthols using <Emphasis Type="Italic">N,N,N’,N’</Emphasis>-tetrabromobenzene-1,3-disulfonamide

N,N,N,’N’-Tetrabromobenzene-1,3-disulfonamide [TBBDA] is found to be a reusable catalyst for efficient synthesis of various amidoalkyl naphthols from β-naphthol, aromatic aldehydes and urea in good to high yields under solvent-free conditions.      

Kinetics of base hydrolysis of α-amino acid esters catalyzed by palladium(II) piperazine complex

The kinetics of base hydrolysis of glycine, histidine, and methionine methyl esters in the presence of [Pd(pip)(H₂O)₂]²⁺ complex, where pip is piperazine, is studied in aqueous solutions, at T = 25°C, and I = 0.1 mol dm⁻³. The rate of ester hydrolysis for glycine methyl ester is studied at different temperature and dioxane/water solutions of different compositions. The kinetic data are fit under the assumption that the hydrolysis proceeds in one step. The activation parameters for the base hydrolysis of the complexes are evaluated      

Determination of europium by using the chemical oscillating system of Ce(IV)-KBrO<Subscript>3</Subscript>-acetone-oxalic acid-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

A sensitive and convenient method for the determination of trace europium ions using an oscillating chemical reaction involving Ce(IV) - KBrO₃ - acetone - oxalic acid - H₂SO₄ was proposed. The results indicated that the changes in oscillating period (T) was linearly proportional to the negative logarithmic concentration of Eu³⁺ (-log C) in the range of 1.41 × 10⁻⁸ ˜ 1.41 × 10⁻⁴ mol L⁻¹ (r = 0.9982) with a detection limit of 1.04 × 10⁻⁹ mol L⁻¹. The recoveries were limited to the range of 99.5% to 100.8%. Under the same conditions, other rare earth ions did not interfere with the determination of Eu³⁺. In addition, a perturbation mechanism was also discussed briefly.      

Kinetic spectrophotometric determination of hydrazine

A kinetic spectrophotometric method for hydrazine determination in the range of 9.36×10⁻⁷ to 4.37×10⁻⁵ mol dm⁻³, based on the inhibitory effect of hydrazine on the oxidation of Victoria Blue 4- R by KBrO₃, was developed and validated. Kinetic parameters are reported for both the indicating and the inhibiting reaction. The detection limit was established as 9.98×10⁻⁸ mol dm⁻³. The selectivity of the proposed method was tested considering the influence of different ions that may be present in real samples. The method was successfully applied for hydrazine determination in various samples (very pure water from the water-steam system of a power plant and Isoniazid tablets, a pharmaceutical product).      

Preliminary results of a quick,simple method of detecting antimony in water samples

Preliminary results of development of a direct and fast method of determination of antimony in samples of tap water using GFAAS are presented. The found levels of antimony were lower than permitted for human consumption. A mixture of Pd and Mg(NO₃)₂ (concentrations in the injected solution: 8.6 μg mL⁻¹ and 5.8 μg mL⁻¹ respectively) was used as the chemical modifier. The pyrolysis and atomization temperatures were 1000 and 1700°C, respectively and the mean analytical recovery 98.2%.      

Ionic liquid promoted Diels-Alder Reaction between anthrone and maleimides

Ionic liquids (IL) are gaining importance as green solvents. Imidazolium ionic liquid [bmim]⁺[Cl]⁻, an environmentally benign solvent, was found to promote the Diels-Alder reaction between anthrone and maleimides at room temperature with excellent yields. The ionic liquid played a dual role as solvent and catalyst.      

Nickel and palladium complexes of enolatefunctionalised N-heterocyclic carbenes

The reaction of chloroethyltrimethylsilylether with 1-methylimidazole furnishes an ionic liquid that undergoes methanolysis to crystalline 2-hydroxyethylimidazolium chloride (crystal structure presented). Conversion to defined hydroxyethylimidazol-2-ylidene nickel complexes failed, but was accomplished with 1-methyl-3-acetophenyl-imidazolium bromide. The bis(NHC^⋂O⁻) nickel(II) chelate is formed, rather than a methallylnickel monochelate, but with nickelocene a monochelate NiCp complex was detected. The bulky 1-(2,6-diisopropylphenyl)-3-(2’-phenyl-enolato)-imidazol-2-ylidene allylpalladium chloride was obtained in pure form. Attempts to generate catalysts for ethylene oligomerization by in situ techniques have failed so far whereas P^⋂O⁻ ligands, comparable by the P-C diagonal relationship, provide active catalysts.      

Ionic liquid-functionalized SBA-15 mesoporous material: efficient heterogeneous catalyst in versatile organic reactions

Ionic liquid-functionalized mesoporous materials exhibited high catalytic activity in versatile organic reactions, such as cycloaddition of carbon dioxide (CO₂) with epoxide, aza-Michael addition of amines to α, β-unsaturated carbonyl compounds, and the Biginelli reaction of aldehyde, ethyl acetoacetate and urea. Recycling of the catalyst in these reactions could be carried out and the catalyst used at least five times without significant loss in activity.      

Complexation of [2.2]paracyclophane with β- and γ-cyclodextrins studied by HPLC and NMR

The NMR spectra of [2.2]paracyclophane with β- or γ-cyclodextrin in DMF-d₇ at room temperature do not show significant complexation, while HPLC of the complexes in mixed H₂O:alcohol solvents demonstrate complexation with different stoichiometries. At 243 K in DMF solution the H3 and H5 NMR signals of γ-cyclodextrin (but not β) exhibit complexation-induced chemical shifts denoting complex formation. According to HPLC, at room temperature the [2.2]paracyclophane complex with β-cyclodextrin in 20% H₂O:EtOH exhibits 1:2 stoichiometry with K ₁ = 1×10² ± 2, K ₂ = 9.0×10⁴ ± 2×10³ (K = 9×10⁶) while that with γ-cyclodextrin in 50% H₂O:MeOH exhibits 1:1 stoichiometry with K ₁ = 4×10³ ± 150 M⁻¹. Thermodynamic parameters for both complexes have been estimated from the retention time temperature dependence. For the β-cyclodextrin complexation at 25°C ΔG ⁰ _CD is −39.7 kJ mol⁻¹ while ΔH ⁰ _CD and ΔS ⁰ _CD are −88.2 kJ mol⁻¹ and −0.16 kJ mol⁻¹ K⁻¹. For γ-cyclodextrin, the corresponding values are ΔG ⁰ _CD = −20.5 kJ mol⁻¹, ΔH ⁰ _CD = −33.5 kJ mol⁻¹ and ΔS ⁰ _CD = −0.04 kJ mol⁻¹ K⁻¹.      

Thermochemical properties of the Fe-analogue of cryolite, Na3FeF6

Relative enthalpies for low-and high-temperature modifications of Na₃FeF₆ and for the Na₃FeF₆ melt have been measured by drop calorimetry in the temperature range 723–1318 K. Enthalpy of modification transition at 920 K, δ_trans H(Na₃FeF₆, 920 K) = (19 ± 3) kJ mol⁻¹ and enthalpy of fusion at the temperature of fusion 1255 K, δ_fusH(Na₃FeF₆, 1255 K) = (89 ± 3) kJ mol⁻¹ have been determined from the experimental data. Following heat capacities were obtained for the crystalline phases and for the melt, respectively: C _p(Na₃FeF₆, cr, α) = (294 ± 14) J (mol K)⁻¹, for 723 = T/K ≤ 920, C _p(Na₃FeF₆, cr, β) = (300 ± 11) J (mol K)⁻¹ for 920 ≤ T/K = 1233 and C _p(Na₃FeF₆, melt) = (275 ± 22) J (mol K)⁻¹ for 1258 ≤ T/K ≤ 1318. The obtained enthalpies indicate that melting of Na3FeF6 proceeds through a continuous series of temperature dependent equilibrium states, likely associated with the production of a solid solution.      

Solar-driven electrochemically assisted semiconductor-catalyzed iodide ion oxidation. Enhanced efficiency by oxide mixtures

Oxidation of iodide ion from an air-saturated solution under natural sunlight (900±50 W m⁻²) on the surfaces of TiO₂, ZnO, Fe₂O₃, MoO₃ and CeO₂ enhances by 6 to 12-fold on application of a cathodic bias of −0.2 to −0.3 V (vs NHE) to the semiconductors; light, the semiconductor and dissolved oxygen are essential for iodine generation. The semiconductors under an anodic bias of +0.2 to +0.3 V (vs NHE) fail to oxidize iodide ion from air-saturated solution under sunlight. Under cathodic bias, semiconductor mixtures like TiO₂-ZnO, TiO₂-Fe₂O₃ and ZnO-Fe₂O₃ show enhanced photocatalytic activity, indicating improved charge separation in oxide mixtures. The mechanism of photocatalysis under cathodic bias is discussed.      

Determination of submillimolar concentration of ferrate(VI) in alkaline solutions by amperometric titration

A new amperometric titration method was developed for quantitative determination of ferrate(VI) (Fe^VIO₄ ²⁻) in the 7.06×10⁻⁵−5.73×10⁻³ M concentration range. Chromium(III) hydroxide solution was used as the titrant. The diffusion current (Id) had a linear relationship with the concentration of ferrate(VI) and slopes were dependent on the concentration of NaOH. The amperometric titration could detect a lower concentration of ferrate(VI) than could potentiometric and colorimetric titrations. The method was applied successfully to determine concentrations of ferrate(VI), generated electrochemically, in strong alkaline solutions.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Ceramic materials made of CdTe and Cd-Zn-Te nanocrystalline powders

In the present study newly produced semiconductor ceramic nanopowder materials made of CdTe and Cd_1−xZn_xTe (CZT) are considered. Common features and differences in microstructures, phase transformations, grain growth and properties of the ceramic materials of the binary and ternary compositions are studied.      

High surface area nano-sized La0.6Ca0.4MnO3 perovskite powder prepared by low temperature pyrolysis of a modified citrate gel

Single phase nanocrystalline La_0.6Ca_0.4MnO₃ powder was synthesized by both the usual and a modified citrate gel precursor method, and the effects on the formation of homogeneous nano-sized powder with a perovskite structure were investigated. In the modified method, single phase La_0.6Ca_0.4MnO₃ powder with an average particle size of 17.2 nm was obtained when the powder was pyrolyzed at 520°C for 2 h. Its specific surface area was 40.7 m² g⁻¹, about 4-fold larger than that of powder made by the usual citrate gel method.