New (p, ρ, T) data for carbon dioxide – Nitrogen mixtures from (250 to 400) K at pressures up to 20 MPa

Comprehensive (p, ρ, T) measurements on two binary mixtures (0.10 CO₂ + 0.90 N₂ and 0.15 CO₂ + 0.85 N₂) were carried out in the gas phase at seven isotherms between (250 and 400) K and pressures up to 20 MPa using a single sinker densimeter with magnetic suspension coupling. A total of 69 (p, ρ, T) data for the first mixture and 69 (p, ρ, T) data for the second are presented in this article. The uncertainty in density was estimated to be (0.02 to 0.15)%, while the uncertainty in temperature was 3.9 mK and the uncertainty in pressure was less than 0.015% (coverage factor k = 2). Experimental results were compared with densities calculated from the GERG equation of state and with data reported by other authors for similar mixtures. Results yielded that, while deviations between experimental data and values calculated from the GERG equation were lower than 0.05% in density for low pressures, the relative error at high pressures and low temperatures increased to about (0.2 to 0.3)%. The main aim of this work was to contribute to an accurate density data base for CO₂/N₂ mixtures and to check or improve equations of state existing for these binary mixtures.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.     

(p, ρ, T) measurements of (ammonia + water) in the temperature range 310 K to 400 K at pressures up to 17 MPa. II. Measurements of{ xNH3 + (1 − x )H2O } at x = (1.0000, 0.8374, 0.6005, and 0.2973)

Measurements of (p, ρ, T) for{xNH₃ +  (1  − x)H₂O} at x =  (1.0000, 0.8374, 0.6005, and 0.2973) and at specified temperatures and pressures in the compressed liquid phase were carried out with a metal-bellows variable volumometer between T =  310 K and T =  400 K at pressures up to 17 MPa. The results cover the high-density region from ρ =  345 kg · m ^− 3 for x =  1.0000 to ρ =  878 kg · m  ^− 3for x =  0.2973. The experimental uncertainties at a 95 per cent confidence interval in temperature T, pressure p, density ρ, and mole fraction x were estimated to be less than  ± 11 mK,  ± 2.6 kPa,  ± 2.1 · 10  ^− 3. ρ, and  ± 1.8 · 10 ^− 3· x, respectively. A detailed comparison of the density values with literature data as well as with an equation of state proposed by Tillner-Roth and Friend is also reported.     

Measurement and correlation of the (p, ρ, T) relation of liquid cyclohexane,toluene, and ethanol in the temperature range from 233.15 K to 473.15 K at pressures up to 30 MPa for use as density reference liquids

Comprehensive (p, ρ, T) measurements on cyclohexane, toluene, and ethanol were carried out in the homogeneous liquid phase for temperatures from 233.15 K to 473.15 K at pressures up to 30 MPa. The measurements were performed by using an accurate single-sinker densimeter based on the Archimedes’ buoyancy principle. The total uncertainty of the measurements in density was estimated to be 0.015% (level of confidence 95%). Based on the experimental results, accurate correlation equations for the density of the three liquids have been established; their uncertainty is 0.020%. Comparisons with previous results of other experimentalists and with values calculated from current equations of state are presented. In this context it is also shown that the density of a liquid can vary slightly depending on the batch of the liquid used for the measurements. The purpose of this work was to provide accurate correlation equations for the densities of the three selected liquids so that these liquids can be used as density reference liquids for the calibration of densimeters and, in particular, for the calibration of vibrating-tube densimeters.     

The (p, ρ, T) properties and apparent molar volumes Vϕ of (ZnBr2 + C2H5OH)

The (p, ρ, T) properties and apparent molar volumes V_? of ZnBr₂ in ethanol at temperatures (293.15 to 393.15) K and pressures up to p = 40 MPa are reported. The measurements were made with a recently developed vibration-tube densimeter. The system was calibrated using double-distilled water, methanol, ethanol, and aqueous NaCl solutions. The experiments were carried out at molalities of m = (0.05681, 0.16958, 0.30426, 0.43835, 0.93055, 1.49016, and 1.88723) mol · kg^?1 using zinc bromide. An empirical correlation for the density of (ZnBr₂ + C₂H₅OH) with pressure, temperature, and molality has been derived. This equation of state was used to calculate other volumetric properties such as isothermal compressibility, isobaric thermal expansibility, the differences in specific heat capacities at constant pressures and volumes, apparent molar volumes of ZnBr₂ in ethanol, and partial molar volumes of both components.     

Thermodynamic study of (alkyl esters + α,ω-alkyl dihalides) III. HmEandVmE for 20 binary mixtures {xCu − 1H2u − 1CO2C4H9 + (1 − x)α,ω-ClCH2(CH2)v − 2CH2Cl}, where u = 1 to 4, α = 1 and v = ω = 2 to 6

In this article, the experimental data of excess molar enthalpies $H_{\mathrm{m}}^{\mathrm{E}}$ and excess molar volumes $V_{\mathrm{m}}^{\mathrm{E}}$ are presented for a set of 20 binary mixtures comprised of the first four butyl alkanoates (methanoate to butanoate) and five α,ω-dichloroalkanes (1,2-dichloroethane to 1,6-dichlorohexane), obtained at atmospheric pressure and at a temperature of 298.15 K. The results indicate the existence of specific interactions between both kinds of compounds resulting in exothermic processes for most mixtures, except for those containing butyl methanoate which give rise to net endo/exothermic effects. The $V_{\mathrm{m}}^{\mathrm{E}}$ are positive for mixtures of (butyl esters + 1,2-dichloroethane or 1,3-dichloropropane) and negative for the remaining ones. The change in $H_{\mathrm{m}}^{\mathrm{E}}$ with the dichloroethane chain length for a same ester is regular although the $V_{\mathrm{m}}^{\mathrm{E}}$ presents an irregular variation. It can, therefore, be deuced from this that the mixing process involves both effects, exothermic/endothermic and expansion/contraction, simultaneously. The behaviour of the mixtures is interpreted on the basis of the results observed and attributed to different effects taking place among the molecules studied.To improve application of the UNIFAC model using the version of Dang and Tassios, average values were recalculated again for parameters of the ester/chloride interaction, distinguishing, during its application, the functional group of the acid part of the ester. In spite of this, the model does not adequately reproduce the systems’ behaviour.     

(Ternary liquid + liquid) equilibria for (water + acetone + α-pinene,or β-pinene,or limonene) mixtures

(Ternary liquid + liquid) equilibria (tie-lines) of (water + acetone + α-pinene) at T = (288.15, 298.15, and 308.15) K and (water + acetone + β-pinene, or limonene) at T = 298.15 K have been measured. The experimental (ternary liquid + liquid) equilibrium data have been correlated successfully by the original UNIQUAC and modified UNIQUAC models. The modified UNIQUAC model reproduced accurately the experimental results for the (water + acetone + α-pinene) system at all the temperatures but fairly agreed with the experimental data for the (water + acetone + β-pinene, or limonene) systems.     

Interactions in (l-phenylalanine/l-histidine + 0.01 mol · kg−1 aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K

Densities (ρ) and speeds of sound (u) have been measured for (l-phenylalanine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) and (l-histidine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K using the density and sound velocity Meter DSA 5000 M. The ρ and u values have been utilized to evaluate values of the partial molar volume (${\varphi }_v^{\circ }$), transfer partial molar volume (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_v^{\circ }$), partial molar isentropic compressibility (${\varphi }_k^{\circ }$), and transfer partial molar isentropic compressibility (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_k^{\circ }$) of the systems studied. The experimentally measured and calculated parameters have been interpreted in terms of host-guest and ion-hydrophilic interactions operative in the systems.