Osmotic and apparent molar properties of binary mixtures alcohol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid

In this work, physical properties (densities and speeds of sound) for the binary systems {1-propanol, or 2-propanol, or 1-butanol, or 2-butanol, or 1-pentanol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate} were experimentally measured from T = (293.15 to 323.15) K and at atmospheric pressure. These data were used to calculate the apparent molar volume and apparent molar isentropic compression which were fitted to a Redlich–Meyer type equation. This fit was used to obtain the corresponding apparent molar properties at infinite dilution. On the other hand, the osmotic and activity coefficients and vapor pressures of these binary mixtures were also determined at T = 323.15 K using the vapor pressure osmometry technique. The Extended Pitzer model of Archer was employed to correlate the experimental osmotic coefficients. From the parameters obtained in the correlation, the mean molal activity coefficients and the excess Gibbs free energy for the studied mixtures were calculated.     

Measurement and modeling of osmotic coefficients of binary mixtures (alcohol + 1,3-dimethylpyridinium methylsulfate) at T = 323.15 K

Measurement of osmotic coefficients of binary mixtures containing several primary and secondary alcohols (1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol) and the pyridinium-based ionic liquid 1,3-dimethylpyridinium methylsulfate were performed at T = 323.15 K using the vapor pressure osmometry technique, and from experimental data, vapor pressure, and activity coefficients were determined. The extended Pitzer model modified by Archer, and the NRTL model modified by Jaretun and Aly (MNRTL) were used to correlate the experimental osmotic coefficients, obtaining standard deviations lower than 0.017 and 0.054, respectively. From the parameters obtained with the extended Pitzer model modified by Archer, the mean molal activity coefficients and the excess Gibbs free energy for the studied binary mixtures were calculated. The effect of the cation is studied comparing the experimental results with those obtained for the ionic liquid 1,3-dimethylimidazolium methylsulfate.     

Interactions of glycine,L-alanine and L-valine with aqueous solutions of trisodium citrate at different temperatures: A volumetric and acoustic approach

Densities, ρ, and speed of sound, u for glycine, L-alanine and L-valine in (0.2, 0.4, 0.6, and 0.8) mol · kg⁻¹ aqueous solutions of trisodium citrate at T = (288.15, 298.15, 308.15 and 318.15) K have been measured. The different parameters such as apparent molar volume, limiting apparent molar volume, transfer volume, have been derived from density data. Experimental values of the speed of sound were used to estimate apparent molar apparent molar isentropic compression, limiting apparent molar isentropic compression, and transfer parameter. The pair and triplet interaction coefficient have been calculated from transfer parameters.     

Density and surface tension of pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate and its binary mixture with alcohol and water

The density and surface tension of the pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate were measured from T (293.15 to 343.15) K. The coefficient of thermal expansion, molecular volume, standard entropy, lattice energy, surface entropy, surface enthalpy, and enthalpy of vaporization were calculated from the experimental values. Density and surface tension were also determined for binary mixtures of {1-butyl-3-methyl-imidazolium l-lactate + water/alcohol (methanol, ethanol, and 1-butanol)} systems over the whole composition range from T (298.15 to 318.15) K at atmospheric pressure. The partial molar volume, excess partial molar volume and apparent molar volume of the component IL and alcohol/water in the binary mixtures were discussed as well as limiting properties at infinite dilution and the thermal expansion coefficients of the four binary mixtures. The surface properties of the four binary mixtures were also discussed.     

Thermophysical properties of binary mixtures of {ionic liquid 2-hydroxy ethylammonium acetate + (water,methanol, or ethanol)}

In this work, density and speed of sound data of binary mixtures of an ionic liquid consisting of {2-hydroxy ethylammonium acetate (2-HEAA) + (water, methanol, or ethanol)} have been measured throughout the entire concentration range, from the temperature of (288.15 to 323.15) K at atmospheric pressure. The excess molar volumes, variations of the isentropic compressibility, the apparent molar volume, isentropic apparent molar compressibility, and thermal expansion coefficient were calculated from the experimental data. The excess molar volumes were negative throughout the whole composition range. Compressibility data in combination with low angle X-ray scattering and NMR measurements proved that the presence of micelles formed due to ion pair interaction above a critical concentration of the ionic liquid in the mixtures. The Peng–Robinson equation of state coupled with the Wong–Sandler mixing rule and COSMO–SAC model was used to predict densities and the calculated deviations were lower than 3%, for binary mixtures in all composition range.     

Vapour pressures,osmotic and activity coefficients for binary mixtures containing (1-ethylpyridinium ethylsulfate + several alcohols) at T = 323.15 K

Osmotic coefficients of binary mixtures containing several primary and secondary alcohols (1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol) and the pyridinium-based ionic liquid 1-ethylpyridinium ethylsulfate were determined at T = 323.15 K using the vapour pressure osmometry technique. From the experimental results, vapour pressure and activity coefficients can be determined. For the correlation of osmotic coefficients, the extended Pitzer model modified by Archer, and the modified NRTL (MNRTL) model were used, obtaining deviations lower than 0.017 and 0.047, respectively. The mean molal activity coefficients and the excess Gibbs free energy for the binary mixtures studied were determined from the parameters obtained with the extended Pitzer model modified by Archer.     

Excess molar volumes and isentropic compressibility of binary systems {trioctylmethylammonium bis(trifluoromethysulfonyl)imide + methanol or ethanol or 1-propanol} at different temperatures

This paper reports measurements of densities for the binary systems of an ionic liquid and an alkanol at T = (298.15, 303.15, and 313.15) K. The IL is trioctylmethylammonium bis(trifluoromethylsulfonyl)imide [OMA]⁺[Tf₂N]^? and the alkanols are methanol, or ethanol, or 1-propanol. The speed of sound at T = 298.15 K for the same binary systems was also measured. The excess molar volumes and the isentropic compressibilities for the above systems were then calculated from the experimental densities and the speed of sound, respectively. Redlich–Kister smoothing polynomial equation was used to fit the excess molar volume and the deviation in isentropic compressibility data. The partial molar volumes were determined from the Redlich–Kister coefficients. For all the systems studied, the excess molar volumes have both negative and positive values, while the deviations in isentropic compressibility are negative over the entire composition range.     

Volumetric and compressibility studies on tri-n-butyl phosphate (TBP)-phase modifier (1-octanol, 1-decanol and isodecanol) interactions from T = (298.15 to 323.15) K

Density (ρ) and speed of sound (u) of the binary mixtures of tributyl phosphate (TBP) and alcohols (1-octanol, 1-decanol and isodecanol) were measured at temperatures from T (298.15 to 323.15) K over the entire composition range and at atmosphere pressure. Using these experimentally determined quantities, the excess molar volume (V^E), deviation in isentropic compressibility (Δκ_s), internal pressure (p_i), and adjusted correlation coefficients have been calculated. The excess molar volume has been fitted to a Redlich–Kister type polynomial equation. The positive or negative deviations shown by the excess quantities and the trend shown by the adjusted correlation coefficients have been interpreted in terms of intermolecular interactions and structure of components.     

Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K

Experimental values of density, viscosity, and refractive index at T = (298.15, 303.15, and 308.15) K while the speed of sound at T = 298.15 K in the binary mixtures of methylcyclohexane with n-hexane, n-heptane, n-octane, n-nonane, n-decane, n-dodecane, and iso-octane are presented over the entire mole fraction range of the binary mixtures. Using these data, excess molar volume, deviations in viscosity, molar refraction, speed of sound, and isentropic compressibility are calculated. All the computed quantities are fitted to Redlich and Kister equation to derive the coefficients and estimate the standard error values. Such a study on model calculations in addition to presentation of experimental data on binary mixtures are useful to understand the mixing behaviour of liquids in terms of molecular interactions and orientational order–disorder effects.     

Density,speed of sound,and refractive index measurements for the binary systems (butanoic acid + propanoic acid,or 2-methyl-propanoic acid) at T = (293.15 to 313.15) K

Density, speed of sound, and refractive index for the binary systems (butanoic acid + propanoic acid, or 2-methyl-propanoic acid) were measured over the whole composition range and at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K. The excess molar volumes, isentropic compressibilities, excess isentropic compressibilities, molar refractions, and deviation in refractive indices were also calculated by using the experimental densities, speed of sound, and refractive indices data, respectively. The Redlich–Kister smoothing polynomial equation was used to fit the excess molar volume, excess isentropic compressibility and deviation in refractive index data. The thermodynamic properties have been discussed in terms of intermolecular interactions between the components of the mixtures.     

Physico-chemical and excess properties of the binary mixtures of methylcyclohexane + ethanol, + propan-1-ol, + propan-2-ol, + butan-1-ol, + 2-methyl-1-propanol,or 3-methyl-1-butanol at T = (298.15, 303.15, and 308.15) K

Physico-chemical properties viz., density, viscosity, and refractive index at temperatures = (298.15, 303.15, and 308.15) K and the speed of sound at T = 298.15 K are measured for the binary mixtures of methylcyclohexane with ethanol, propan1-ol, propan-2-ol, butan-1-ol, 2-methyl-1-propanol, and 3-methyl-1-butanol over the entire range of mixture composition. From these data, excess molar volume, deviations in viscosity, molar refraction, speed of sound, and isentropic compressibility have been calculated. These results are fitted to the polynomial equation to derive the coefficients and standard errors. The experimental and calculated quantities are used to study the nature of mixing behaviours between the mixture components.     

Osmotic coefficients of binary mixtures of 1-butyl-3-methylimidazolium methylsulfate and 1,3-dimethylimidazolium methylsulfate with alcohols at T = 323.15 K

Measurements of osmotic coefficients of BMimMSO₄ (1-butyl-3-methylimidazolium methylsulfate) and MMimMSO₄ (1,3-dimethylimidazolium methylsulfate) with ethanol, 1-propanol, and 2-propanol at T = 323.15 K are reported in this work. Vapour pressure and activity values for the binary systems studied are obtained from experimental results. The osmotic coefficients are correlated using the extended Pitzer model modified by Archer and the modified NRTL (MNRTL) model. The standard deviations obtained with both models are lower than 0.013 and 0.060, respectively. The parameters obtained with the extended Pitzer model of Archer are used to calculate the mean molal activity coefficients and the excess Gibbs free energy of the binary mixtures.     

Ultrasound speeds and molar isentropic compressions of (3-ethoxypropane-1-amine + water) mixtures from T = (283.15 to 303.15) K

Alkoxyamines containing two hydrophilic groups with great affinity to water are multipurpose compounds with important applications, either on theoretical or practical grounds. The thermodynamic characterization of aqueous mixtures of these compounds is scant. Ultrasound speed measurements have been made in 53 mixtures of the aqueous ethoxypropane-1-amine binary system, across the entire composition range and temperatures between T = (283.15 and 303.15) K, at atmospheric pressure. By combining ultrasound speed and density data, values of the isentropic compressibility were derived. Excess molar isentropic compressions were estimated and analytically fitted to Redlich–Kister polynomial equations. Excess partial molar quantities were then calculated including their limiting values, which were obtained from the Redlich–Kister fitting coefficients. The temperature dependences of limiting partial molar isentropic compressions and isobaric expansions were also scrutinized. Compressibility changes associated with different patterns of aggregation and hydration over the whole composition range are identified.     

Thermodynamic properties of binary mixtures combining two pyridinium-based ionic liquids and two alkanols

Densities and speeds of sound have been determined for the binary mixtures containing an ionic liquid (1-butyl-3-methylpyridinium tetrafluoroborate or 1-butyl-4-methylpyridinium tetrafluoroborate) and an alkanol (methanol or ethanol) over the temperature range (293.15 to 323.15) K. Excess volumes and excess isentropic compressibilities have been calculated from density and speed of sound data and correlated. All the mixtures show negative values for these excess properties. Furthermore, the isothermal (vapour + liquid) equilibrium has been measured at T = (303.15 and 323.15) K, and the corresponding activity coefficients and excess Gibbs functions have been obtained. In this case, positive excess Gibbs functions have been found. We have carried out an exhaustive interpretation of the experimental results in terms of structural and energetic effects taking also into account the thermodynamic information of pure compounds. Finally, in order to study the influence of both, the presence and the position of methyl group in the cation, we have compared the results of these systems with those obtained for the mixtures formed by 1-butylpyridinium tetrafluoroborate and methanol or ethanol.     

(Vapour + liquid) equilibria,volumetric and compressibility behaviour of binary and ternary aqueous solutions of 1-hexyl-3-methylimidazolium chloride,methyl potassium malonate,and ethyl potassium malonate

(Vapour + liquid) equilibrium data (water activity, vapour pressure, osmotic coefficient, and activity coefficient) of binary aqueous solutions of 1-hexyl-3-methylimidazolium chloride ([C₆mim][Cl]), methyl potassium malonate, and ethyl potassium malonate and ternary {[C₆mim][Cl] + methyl potassium malonate} and {[C₆mim][Cl] + ethyl potassium malonate} aqueous solutions were obtained through the isopiestic method at T = 298.15 K. These results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solutions at molality about 0.4 mol · kg⁻¹. The constant water activity lines of all the ternary systems investigated show small negative deviations from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The density and speed of sound measurements were carried out on solutions of methyl potassium malonate and ethyl potassium malonate in water and of [C₆mim][Cl] in aqueous solutions of 0.25 mol · kg⁻¹ methyl potassium malonate and ethyl potassium malonate at T = (288.15 to 308.15) K at atmospheric pressure. From the experimental density and speed of sound data, the values of the apparent molar volume, apparent molar isentropic compressibility and excess molar volume were evaluated and from which the infinite dilution apparent molar volume and infinite dilution apparent molar isentropic compressibility were calculated at each temperature. Although, there are no clear differences between the values of the apparent molar volume of [C₆mim][Cl] in pure water and in methyl potassium malonate or ethyl potassium malonate aqueous solutions, however, the results show a positive transfer isentropic compressibility of [C₆mim][Cl] from pure water to the methyl potassium malonate or ethyl potassium malonate aqueous solutions. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

Thermophysical and sonochemical behaviour of binary mixtures of decan-1-ol with halohydrocarbons at (T = 293.15 and 313.15) K

Densities and ultrasonic velocities of binary mixtures of decan-1-ol with 1,2-dichloroethane, 1,2-dibromoethane, and 1,1,2,2-tetrachloroethene have been measured over the entire range of composition at T = (293.15 and 313.15) K and at atmospheric pressure. From these results, the excess molar volumes, molar free volumes, excess molar isentropic compressibilities, limiting excess partial molar volumes, and isentropic compressibilities, intermolecular free lengths, and available volumes by three methods, thermal expansion coefficients, parameters related to space-filling ability, intermolecular free lengths, and molecular radii have been calculated. The experimental ultrasonic velocities have been analyzed in terms of the ideal mixture relations of Nomoto and Van Dael, Jacobson’s free length, Schaaff’s collision factor, Flory’s statistical, and Prigogine–Flory–Patterson theories and thermoacoustical parameters.     

The mixing properties of 1,3,5-trimethyl-1,3,5-tris(3,3,3-trifluoropropyl) cyclotrisiloxane with various organosilicon compounds at different temperatures

The density and refractive index were determined for four binary mixtures of 1,3,5-trimethyl-1,3,5-tris(3,3,3-trifluoropropyl) cyclotrisiloxane with octamethyl-cyclotetrasiloxane, hexamethyldisiloxane, 2,4,6,8-tetramethyl-cyclotetrasiloxane and 2,4,6,8-tetramethyl-2,4,6,8-tetraethenylcyclotetrasiloxane at different temperatures T = (308.15, 313.15, 318.15, 323.15 and 328.15) K and atmospheric pressure using a DMA4500/RXA170 combined system. The excess molar volume, partial excess volume at infinite dilution, isobaric coefficient of thermal expansion, excess refraction indices, Lorentz–Lorenz molar refraction and the deviation in molar refraction have been calculated using this data. The results have been incorporated into the Redlich–Kister equation and used to estimate the binary interaction parameters and standard deviation. The values of partial excess volume at infinite dilution and excess refraction indices for the four binary systems at different temperatures were calculated using the adjustable parameters of the Redlich–Kister smoothing equation. The factors that affect these excess quantities are discussed.     

Densities,sound velocities,and refractive indexes of (tetralin + n-decane) and thermodynamic modeling by Prigogine–Flory–Patterson model

Mixtures of tetralin (1,2,3,4-tetrahydronaphthalene), an aromatic cyclic molecule, and n-decane present asymmetries in chemical nature, shape, and chain length, and are frequently found, e.g., in naphtha or kerosene fractions. Aiming at understanding the impact of these asymmetries on some thermophysical properties, this work presents densities, sound velocities, and refractive indexes for this binary system along with the properties of the pure components at T = (293.15, 303.15, 313.15, 323.15, 333.15, and 343.15) K over whole composition range and atmospheric pressure. From these data, the following derived properties were obtained: isentropic compressibility, molar refractivity, excess volume, excess isentropic compressibility, molar refractivity deviations, and thermal expansion coefficient. Several sound velocity mixing rules were tested, and the best result was for Nomoto mixing rule. Pure component densities and sound velocities were correlated with Prigogine–Flory–Patterson (PFP) model. The binary interaction parameter for this model was obtained from correlation of excess volumes and isentropic compressibilities. This model correlated experimental densities very well and correlated reasonably well sound velocities and thermal expansion coefficient.     

Apparent molar volumes and compressibilities of electrolytes and ions in γ-butyrolactone

The densities of tetraphenylphosphonium bromide, sodium tetraphenylborate, lithium perchlorate, sodium perchlorate and lithium bromide in γ-butyrolactone at (288.15, 293.15, 298.15, 303.15, 308.15 and 313.15) K and speed of sound at 298.15 K have been measured. From these data apparent molar volumes V_Φ at (288.15, 293.15, 298.15, 303.15, 308.15 and 313.15) K and the apparent molar isentropic compressibility K_S,Φ, at T = 298.15 K of the salts have been determined. The apparent molar volumes and the apparent molar isentropic compressibilities were fitted to the Redlich, Rosenfeld and Mayer equation as well as to the Pitzer and Masson equations yielding infinite dilution data. The obtained limiting values have been used to estimate the ionic data of the standard partial molar volume and the standard partial isentropic compressibility in γ-butyrolactone solutions.     

Effect of the temperature on the physical properties of pure 1-propyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide and characterization of its binary mixtures with alcohols

In this paper, physical properties of a high purity sample of the ionic liquid 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [PMim][NTf₂], and its binary mixtures with methanol, ethanol, 1-propanol, and 2-propanol were measured at atmospheric pressure. The temperature dependence of density, refractive index and speed of sound (293.15 to 343.15) K and dynamic viscosity (298.15 to 343.15) K were studied at atmospheric pressure by conventional techniques for the pure ionic liquid. For its mixtures with alcohols, density, speed of sound, and refractive index were measured at T = 298.15 K over the whole composition range. The thermal expansion coefficient of the [PMim][NTf₂] was calculated from the experimental results using an empirical equation, and values of the excess molar volume, excess refractive index, and excess molar isentropic compressibility for the binary systems at the above mentioned temperature, were calculated and fitted to the Redlich–Kister equation. The heat capacity of the pure ionic liquid at T = 298.15 K was determined using DSC.