The salting-out effect and phase separation in aqueous solutions of tri-sodium citrate and 1-butyl-3-methylimidazolium bromide

The aim of this work is to obtain further evidence about the salting-out effect produced by the addition of tri-sodium citrate to aqueous solutions of water miscible ionic liquid 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]) by evaluating the effect of tri-sodium citrate on the thermodynamic properties of aqueous solutions of this ionic liquid. Experimental measurements of density and sound velocity at different temperatures ranging from (288.15 to 308.15) K, the refractive index at 308.15 K and the liquid–liquid phase diagram at different temperatures ranging from (288.15 to 338.15) K for aqueous solutions containing 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]) and tri-sodium citrate (Na₃Cit) are taken. The apparent molar volume of transfer of [C₄mim][Br] from water to aqueous solutions of Na₃Cit have positive values and it increases by increasing salt molality. Although at high IL molality, the apparent molar isentropic compressibility shows similar behaviour with that of the apparent molar volume. However at low concentrations of IL, the apparent molar isentropic compressibility of transfer of [C₄mim][Br] from water to aqueous solutions of Na₃Cit have negative values. The effects of temperature and the addition of Na₃Cit and [C₄mim][Br] on the liquid–liquid phase diagram of the investigated system have been studied. It was found that an increase in temperature caused the expansion of the one-phase region. The presence of Na₃Cit triggers a salting-out effect, leading to significant upward shifts of the liquid–liquid de-mixing temperatures of the system. The effect of temperature on the phase-forming ability in the system investigated has been studied based on a salting-out coefficient obtained from fitting the binodal values to a Setschenow-type equation for each temperature. Based on cloud point values, the energetics of the clouding process have been estimated and it was found that both of entropy and enthalpy are the driving forces for biphasic formation.     

Effect of tri-potassium phosphate on volumetric,acoustic, and transport behaviour of aqueous solutions of 1-ethyl-3-methylimidazolium bromide at T = (298.15 to 318.15) K

Density, sound velocity, and viscosity of 1-ethyl-3-methylimidazolium bromide, [Emim][Br], in aqueous solutions of tri-potassium phosphate with salt weight fractions (w_s = 0.00, 0.10, 0.15, and 0.20) have been measured as a function of concentration of [Emim][Br] at atmospheric pressure and T = (298.15, 303.15, 308.15, 313.15, and 318.15) K. The apparent molar volume, isentropic compressibility, apparent isentropic compressibility, and relative viscosity values have been evaluated from the experimental data. The partial molar volume and isentropic compressibility at infinite dilution, and viscosity B-coefficient obtained from these data have been used to calculate the corresponding transfer parameters for the studied IL from water to the aqueous tri-potassium phosphate solutions. Also, an empirical equation was satisfactorily used to correlate the experimental viscosity data.     

Effect of alkyl chain length and temperature on the thermodynamic properties of ionic liquids 1-alkyl-3-methylimidazolium bromide in aqueous and non-aqueous solutions at different temperatures

The alkyl chain length of 1-alkyl-3-methylimidazolium bromide ([Rmim][Br], R = propyl (C₃), hexyl (C₆), heptyl (C₇), and octyl (C₈)) was varied to prepare a series of room-temperature ionic liquids (RTILs), and experimental measurements of density and speed of sound at different temperatures ranging from (288.15 to 308.15) K for their aqueous and methanolic solutions in the dilute concentration region (0.01 to 0.30) mol · kg^?1 were taken. The values of the compressibilities, expansivity and apparent molar properties for [C_nmim][Br] in aqueous and methanolic solutions were determined at the investigated temperatures. The obtained apparent molar volumes and apparent molar isentropic compressibilities were fitted to the Redlich–Mayer and the Pitzer’s equations from which the corresponding infinite dilution molar properties were obtained. The values of the infinite dilution molar properties were used to obtain some information about solute–solvent and solute–solute interactions. The thermodynamic properties of investigated ionic liquids in aqueous solutions have been compared with those in methanolic solutions. Also, the comparison between thermodynamic properties of investigated solutions and those of electrolyte solutions, polymer solutions, cationic surfactant solutions and tetraalkylammonium salt solutions have been made.     

Effect of simple electrolytes on the thermodynamic properties of room temperature ionic liquids in aqueous solutions

Density, sound velocity and conductivity measurements are carried out on 1-heptyl-3-methylimidazolium bromide ([C₇mim][Br]) in pure water and in aqueous solutions of sodium di-hydrogen citrate, di-sodium hydrogen citrate and tri-sodium citrate over a range of temperatures at atmospheric pressure. The experimental density and sound velocity data are used to calculate the apparent molar volume and isentropic compressibility as a function of temperature and concentration. The effects of temperature and charge on the anion of sodium citrate salts on the apparent molar volume and isentropic compressibility of [C₇mim][Br] are studied. It was found that both of the apparent molar volume and isentropic compressibility of [C₇mim][Br] in aqueous sodium citrate solutions are larger than those in pure water and increase by increasing temperature. The effects of temperature and charge on the anion of sodium citrate salts on the conductivity behavior of the investigated IL solutions are also studied.     

Thermodynamic studies of the ionic liquid 1-hexyl-3-methylimidazolium chloride [C6mim][Cl] in polyethylene glycol aqueous solutions

Vapour pressure osmometery (VPO) measurements at T = 308.15 K for {[C₆mim][Cl] + water}, {[C₆mim][Cl] + (0.005, 0.0155, and 0.0263) mol · kg⁻¹ PEG2000 + water} and {[C₆mim][Cl] + (0.0017, 0.0052, and 0.0088) mol · kg⁻¹ PEG6000 + water} systems and isopiestic measurements at T = 298.15 K for {[C₆mim][Cl] + PEG2000 + water} and {[C₆mim][Cl] + PEG6000 + water} systems have been carried out. The VPO measurements were carried out at very low concentrations of PEG and from which the values of the water activities, osmotic coefficients, vapour pressure and activity coefficients were obtained. The data obtained from the VPO method show that over the whole concentration range of the ionic liquid (IL), the activity coefficients of [C₆mim][Cl] in the presence of PEG2000 are increased. Although, at high IL concentrations, the values of the activity coefficient of [C₆mim][Cl] in the presence of PEG6000 are also increased, however for low concentrations of IL the values of the activity coefficient of [C₆mim][Cl] in pure water are larger than those in aqueous PEG6000 solutions. For a known IL concentration, the values of water activity coefficient for the binary {[C₆mim][Cl] + water} system are larger than those for the ternary {[C₆mim][Cl] + PEG + water} systems and decrease by increasing the concentration of PEG or decreasing the molar mass of PEG. The constant water activity lines of the all ternary systems obtained from the isopiestic method show positive deviation from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

Thermodynamic properties of solutions of sodium di-hydrogen phosphate in (1-propanol + water) mixed-solvent media over the temperature range of (283.15 to 303.15) K

The apparent molar volume and apparent molar isentropic compressibility of solutions of sodium di-hydrogen phosphate (NaH₂PO₄) in (1-propanol + water) mixed-solvent media with alcohol mass fractions of 0.00, 0.05, 0.10, and 0.15 are reported over the range of temperature (283.15 to 303.15) K at 5 K intervals. The results were fitted to a Redlich–Mayer type equation from which the apparent molar volume and apparent molar isentropic compressibility of the solutions at the infinite dilution were also calculated at the working temperature. The results show a positive transfer volume of NaH₂PO₄ from an aqueous solution to an aqueous 1-propanol solution. The apparent molar isentropic compressibility of NaH₂PO₄ in aqueous 1-propanol solutions is negative and it increases with increasing the concentration of NaH₂PO₄, 1-propanol, and temperature. Electrical conductivity and refractive index of the solutions are also studied at T = 298.15 K. The effects of the electrolyte concentration and relative permittivity of the medium on the molar conductivity were also investigated.     

Volumetric and isentropic compressibility behaviour of aqueous solutions of (polyvinylpyrrolidone + sodium citrate) at T = (283.15 to 308.15) K

The apparent specific volumes and isentropic compressibilities have been determined for polyvinylpyrrolidone in aqueous solutions of sodium citrate by density and sound velocity measurements at T = (283.15 to 308.15) K at atmospheric pressure. The results show a positive transfer volume of PVP from an aqueous solution to an aqueous sodium citrate solution. For low concentrations of PVP, the apparent specific volumes of PVP in water increased along with an increase in the polymer mass fraction, while in aqueous sodium citrate solutions decreased along with an increase in the polymer mass fraction. For high concentrations of PVP, the apparent specific volumes of PVP in water and in aqueous sodium citrate solutions were independent of the polymer mass fraction. The apparent specific isentropic compressibility of PVP is negative at T = (283.15 and 288.15) K, which imply that the water molecules around the PVP molecules are less compressible than the water molecules in the bulk solutions. The positive values of apparent specific isentropic compressibility at T = (298.15, 303.15, and 308.15) K imply that the water molecules around the PVP molecules are more compressible than the water molecules in the bulk solutions. Finally, it was found that the apparent specific isentropic compressibility of PVP increases as the concentration of sodium citrate increases.     

Effect of KCl on the volumetric and transport properties of aqueous tri-potassium citrate solutions at different temperatures

Density, speed of sound and viscosity measurements of binary aqueous solutions of tri-potassium citrate were performed from dilute up to near saturated concentration range at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K. Volumetric and transport properties of ternary aqueous solutions of (tri-potassium citrate + KCl) have also been measured within the molality range of KCl (0.05, 0.15, 0.25, 0.35, 0.45, and 0.55) at different temperatures. Apparent molar volume and apparent molar isentropic compressibility have been calculated from the density and speed of sound for binary and ternary aqueous solutions of tri-potassium citrate. Apparent molar volume and apparent molar isentropic compressibility of ternary aqueous solutions of (tri-potassium citrate + KCl) have been correlated with the Redlich–Mayer equation. Viscosity values of ternary aqueous solutions of (tri-potassium citrate + KCl) have been fitted with the Jones–Dole equation. The results obtained have been interpreted in elucidating the effect of tri-potassium citrate on the interaction of KCl–H₂O. Density and viscosity values of ternary aqueous solutions of (tri-potassium citrate + KCl) have been predicted successfully using the methods proposed by Laliberte (2007), Laliberte and Cooper (2004) [9], [10] and Zafarani-Moattar and Majdan-Cegincara (2009) [11].     

Thermodynamics of the ternary systems: (water + glycine,l-alanine and l-serine + di-ammonium hydrogen citrate) from volumetric,compressibility, and (vapour + liquid) equilibria measurements

The apparent molar volumes and isentropic compressibility of glycine, l-alanine and l-serine in water and in aqueous solutions of (0.500 and 1.00) mol · kg^?1 di-ammonium hydrogen citrate {(NH₄)₂HCit} and those of (NH₄)₂HCit in water have been obtained over the (288.15 to 313.15) K temperature range at 5 K intervals at atmospheric pressure from measurements of density and ultrasonic velocity. The apparent molar volume and isentropic compressibility values at infinite dilution of the investigated amino acids have been obtained and their variations with temperature and their transfer properties from water to aqueous solutions of (NH₄)₂HCit have also been obtained. The results have been interpreted in terms of the hydration of the amino acids. In the second part of this work, water activity measurements by the isopiestic method have been carried out on the aqueous solutions of {glycine + (NH₄)₂HCit}, {alanine + (NH₄)₂HCit}, and {serine + (NH₄)₂HCit} at T = 298.15 K at atmospheric pressure. From these measurements, values of vapour pressure, osmotic coefficient, activity coefficient and Gibbs free energy were obtained. The effect of the type of amino acids on the (vapour + liquid) equilibrium of the systems investigated has been studied. The experimental water activities have been correlated successfully with the segment-based local composition Wilson model. Furthermore, the thermodynamic behaviour of the ternary solutions investigated has been studied by using the semi-ideal hydration model and the linear concentration relations have been tested by comparing with the isopiestic measurements for the studied systems at T = 298.15 K.     

Study on the enthalpy of solution and enthalpy of dilution for the ionic liquid [C3mim][Val] (1-propyl-3-methylimidazolium valine)

A new amino acid ionic liquid (AAIL) [C₃mim][Val] (1-propyl-3-methylimidazolium valine) was prepared by the neutralization method. Using the solution-reaction isoperibol calorimeter, molar solution enthalpies of the ionic liquid [C₃mim][Val] with known amounts of water and with different concentrations in molality were measured at T = 298.15 K. In terms of standard addition method (SAM) and Archer’s method, the standard molar enthalpy of solution for [C₃mim][Val] without water, ${\mathrm{\Delta }}_{\text{s}}{H}_{\text{m}}^{\circ }$ = (−55.7 ± 0.4) kJ · mol⁻¹, was obtained. The hydration enthalpy of the cation [C₃mim]⁺, ΔH₊ ([C₃mim]⁺) = −226 kJ · mol⁻¹, was estimated in terms of Glasser’s theory. Using the RD496-III heat conduction microcalorimeter, the molar enthalpies of dilution, Δ_DH_m(m_i → m_f), of aqueous [C₃mim][Val] with various values of molality were measured. The values of Δ_DH_m(m_i → m_f) were fitted to Pitzer’s ion-interaction model and the values of apparent relative molar enthalpy, ^φL, calculated using Pitzer’s ion-interaction model.     

Relative hydrophobicity of equilibrium phases in biphasic systems (ionic liquid + water)

Partition coefficients for a series of dinitrophenylated (DNP) amino acids in biphasic systems composed of hydrophobic ionic liquids and water were experimentally determined. The ionic liquids used were three 1-alkyl-3-methylimidazolium tetrafluoroborates, [C_nmim][BF₄], with alkyl chain substituents hexyl, octyl, and decyl. The liquid–liquid phase diagram for the system ([C₁₀mim][BF₄] + water) was experimentally determined. DNP amino acids distribute preferentially to the IL-rich phase and ([C₁₀mim][BF₄] + water) was found to be the system with the lowest partition coefficients for the solutes studied. The experimental partition coefficients decrease as the size of the alkyl side chain in the ionic liquids increases. The free energy of transfer of a methylene group between phases was calculated through the partition coefficients, which provides a measure of the relative hydrophobicity of the equilibrium phases. It was found that the system ([C₁₀mim][BF₄] + water) presents a lower free energy (and thus a lower relative hydrophobicity) than the system ([C₈mim][BF₄] + water). In order to better understand this result, the micellar behavior of the three ionic liquids was studied. Electrical conductivities of several aqueous solutions of the ionic liquids were measured to determine the critical micelle concentration (CMC) and the degree of micelle ionization, α, of the three ionic liquids. From these two properties it was possible to obtain the free energy of micellization, ΔG_mic, for the ionic liquids.     

Volumetric and compressibility behaviour of poly(propylene glycol) – Amino acid aqueous solutions at different temperatures

Precise density and sound velocity measurements have been carried out for aqueous solutions of PPG725 in the absence and presence of (0.2 and 0.5) mol · kg⁻¹ amino acids: alanine, glycine, serine and proline, and also for aqueous solutions of these amino acids in the absence and presence of 0.01 w/w PPG725 at T = (288.15, 293.15, 298.15, 303.15 and 308.15) K. From the experimental density and sound velocity values, the apparent molar volume and isentropic compressibility have been obtained and extrapolated to infinite dilution. The infinite dilution apparent molar properties for transfer of PPG from water to aqueous amino acids solutions and also those for transfer of amino acids from water to aqueous PPG solutions have been studied. Temperature dependency of the infinite dilution apparent molar volume was utilised to determine structure-breaker or structure-maker effects of the solutes. Hydration numbers of the amino acids in the investigated aqueous solutions have been evaluated from the volumetric and compressibility properties. All results are discussed based on the salting-out aptitude of the amino acids (hydrophilic + hydrophobic) interactions and (hydrophobic + hydrophobic) interactions occurred between PPG and the investigated amino acids.     

Apparent molar volumes and compressibilities of electrolytes and ions in γ-butyrolactone

The densities of tetraphenylphosphonium bromide, sodium tetraphenylborate, lithium perchlorate, sodium perchlorate and lithium bromide in γ-butyrolactone at (288.15, 293.15, 298.15, 303.15, 308.15 and 313.15) K and speed of sound at 298.15 K have been measured. From these data apparent molar volumes V_Φ at (288.15, 293.15, 298.15, 303.15, 308.15 and 313.15) K and the apparent molar isentropic compressibility K_S,Φ, at T = 298.15 K of the salts have been determined. The apparent molar volumes and the apparent molar isentropic compressibilities were fitted to the Redlich, Rosenfeld and Mayer equation as well as to the Pitzer and Masson equations yielding infinite dilution data. The obtained limiting values have been used to estimate the ionic data of the standard partial molar volume and the standard partial isentropic compressibility in γ-butyrolactone solutions.     

Densities and dynamic viscosities of the binary system (water + 1-hexyl-3-methylimidazolium bromide) at different temperatures

Densities and viscosities were measured for pure ionic liquid [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and the binary system (water + [C₆mim][Br]) at 0.1 MPa and in the (293.15 to 333.15) K range. The excess molar volume and viscosity deviation were calculated and correlated by Redlich–Kister polynomial expansions. The fitting parameters and the standard deviations were determined.     

Solubilities of imidazolium-based ionic liquids in aqueous salt solutions at 298.15 K

The solubilities of ionic liquids in the ternary systems (ionic liquid + H₂O + inorganic salt) were reported at 298.15 K and atmospheric pressure. The examined ionic liquids are [C₄mim][PF₆] (1-n-butyl-3-methylimidazolium hexafluorophosphate), [C₈mim][PF₆] (1-n-octyl-3-methylimidazolium hexafluorophosphate), and [C₈mim][BF₄] (1-n-octyl-3-methylimidazolium tetrafluoroborate). The examined inorganic salts are the chloride-based salts (sodium chloride, lithium chloride, potassium chloride, and magnesium chloride) and the sodium-based salts (sodium thiocyanate, sodium nitrate, sodium trifluoroacetate, sodium bromide, sodium iodide, sodium perchlorate, sodium acetate, sodium hydroxide, sodium dihydrogen phosphate, sodium phosphate, sodium tetrafluoroborate, sodium sulfate, and sodium carbonate). The effects of the cations and the anions of the ionic liquids and of the inorganic salts on the solubility of the ionic liquids in the ternary solutions were systematically compared and discussed.     

Effect of electrolytes on surface tension and surface adsorption of 1-hexyl-3-methylimidazolium chloride ionic liquid in aqueous solution

Surface and bulk properties of 1-hexyl-3-methylimidazolium chloride [C₆mim][Cl] as an ionic liquid (IL) have been investigated by surface tension and electrical conductivity techniques at various temperatures. Results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solution. Critical aggregation concentration (cac) values obtained by conductivity and surface tension measurements are in good agreement with values found in the literature. A series of important and useful adsorption parameters including cac, surface excess concentration (Γ), and minimum surface area per molecule (A_min) at the air + water interface were estimated from surface tension in the presence and absence of different electrolytes. Obtained data show that the surface tension as well as the cac of [C₆mim][Cl] is reduced by electrolytes. Also, values of surface excess concentration (Γ) show that the IL ions in the presence of electrolyte have much larger affinity to adsorption at the surface and this affinity increased in aqueous electrolyte solution in the order of I^? > Br^? > Cl^? for counter ion of salts that was explained in terms of a larger repulsion of chloride anions from interface to the bromide and iodide anion as well as difference in their excess polarizability.     

Interactions of glycine,L-alanine and L-valine with aqueous solutions of trisodium citrate at different temperatures: A volumetric and acoustic approach

Densities, ρ, and speed of sound, u for glycine, L-alanine and L-valine in (0.2, 0.4, 0.6, and 0.8) mol · kg⁻¹ aqueous solutions of trisodium citrate at T = (288.15, 298.15, 308.15 and 318.15) K have been measured. The different parameters such as apparent molar volume, limiting apparent molar volume, transfer volume, have been derived from density data. Experimental values of the speed of sound were used to estimate apparent molar apparent molar isentropic compression, limiting apparent molar isentropic compression, and transfer parameter. The pair and triplet interaction coefficient have been calculated from transfer parameters.     

Pd-catalyzed asymmetric alternating co-polymerization of propene with carbon monoxide using ionic liquids

A protocol for Pd-catalyzed stereoselective co-polymerization of propene and carbon monoxide using chiral ligands, such as (2S,3S)-DIOP and (R)-P-Phos in [C₄mim][PF₆]/[C₆mim][PF₆] as an ionic liquid medium was developed. With (2S,3S)-DIOP as chiral ligand and [C₄mim][PF₆] as medium, the Pd-catalyzed co-polymerization of propene and CO gave almost completely regioregular polyketones, and the product polymer showed moderate stereoregularity (61% of ℓ-diads). The highest molar optical rotation = +15.9 and polydispersity = 1.2 were attained when (R)-P-Phos was used as the ligand and [C₆mim]PF₆ as the solvent. The co-polymer exhibited regioregularity of H–H/H–T/T–T (%) = 17:66:17.     

Thermodynamic properties and polymorphism of 1-alkyl-3-methylimidazolium bis(triflamides)

Heat capacities in a range of temperatures of (5 to 370) K, enthalpies and temperatures of phase transitions for 1-ethyl-3-methylimidazolium bis(triflamide) ([C₂mim][NTf₂]) and 1-octyl-3-methylimidazolium bis(triflamide) ([C₈mim][NTf₂]) have been determined by adiabatic calorimetry. [C₂mim][NTf₂] has been found to form four crystalline phases with different fusion temperatures. Formation of the phases can be controlled by the temperature of annealing during crystallization. [C₈mim][NTf₂] forms three sequences of crystalline modifications, each including two polymorphs. Based on results of the measurements, thermodynamic functions for the compounds under study have been calculated.A heat-capacity anomaly near T = 230 K reported earlier for [C₄mim][NTf₂] and [C₆mim][NTf₂] have been found in some crystalline modifications of both the studied compounds. The position of the anomaly depends on the temperature of annealing of the crystals.