Synthesis of porphyrin‐embedded dendronized polymers by Suzuki polycondensation

Porphyrin‐embedded high molecular weight dendronized polymers up to fourth generation have been synthesized by Suzuki polycondensation of Fréchet‐type dendritic dibromo macromonomers and porphyrin diboronic pinacol ester. Higher generation lateral dendritic wedges not only endow the dendronized polymers with good solubility in commonly used organic solvents, but also prevent planar porphyrins and conjugated polymer backbones from aggregating by their “site isolation” effect. This type of porphyrin‐embedded dendronized polymers can be used as saturated red light‐emitting materials. With the increase of the generation of the lateral dendrons, the quantum yields of the dendronized polymers also gradually increased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4030–4037, 2008     

Synthesis and Optical Properties of Dendronized Porphyrin Polymers

Summary: A novel kind of dendronized porphyrin polymers was synthesized by Sonogashira coupling of diethynyl‐functionalized porphyrin monomers and diiodo‐functionalized macromonomers bearing Fréchet‐type dendrons. The encapsulation of red‐light‐emitting porphyrin‐containing conjugated backbones into dendronized polymers can not only reduce the aggregation of polymer backbones and the self‐quenching of their fluorescence but also endow the porphyrin polymers with good solubility. We also report the optical and electrochemical properties of the porphyrin‐containing dendronized polymers.

Synthesis of a novel kind of dendronized porphyrin polymers by Sonogashira coupling of diethynyl‐functionalized porphyrin monomers and diiodo‐functionalized dendritic macromonomers.     

Poly(oxanorbornenedicarboximide)s dendronized with amphiphilic poly(alkyl ether) dendrons

Attaching dendritically branched side chains to each repeat unit of a linear polymer produces molecular building blocks of nanometer‐sized dimensions called dendronized polymers. The structure of these complex molecular architectures is highly tunable and, therefore, of interest for a wide range of potential applications. The first examples of dendronized polymers prepared by living ring‐opening metathesis polymerization of oxanorbornenedicarboximide macromonomers with poly(alkyl ether) dendrons are reported. Small‐angle X‐ray scattering experiments on bulk samples confirm that the diameter of the individual cylindrical polymers can be tailored by the choice of dendron generation or the length of the hydrocarbon peripheral group. Analysis of the SAXS data based on a core‐shell model indicates that although the diameter of the cylinder increases with generation, the size of the core does not change; this suggests that these dendrons only loosely encapsulate the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3221–3239     

Synthesis and polymerization of functionalized dendritic macromonomers

The synthesis of dendritic building blocks (dendrons) of the first generation (G1) and the second generation, which carry differently protected amine groups in the periphery, is reported. The dendrons are used for the synthesis of the corresponding acrylic and methacrylic macromonomers. Their polymerization behavior under radical conditions is investigated. The G1 dendronized polymers are decorated at their peripheral amino groups, that is, with the chiral amino acid L -phenylalanine by the attach-to approach. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1940–1954, 2001     

Self-organization of amide dendrons and their dendronized macromolecules

A polymerizable methacryl unit was introduced at the focal moiety of the amide dendrons which have amide branches and alkyl periphery. Their dendronized polymers were also prepared by the radical polymerization of the methacryl units. The self-organization characteristics of dendrons and dendronized polymers were then investigated in both the organic and aqueous phases. The amide dendrons (1M and 2M) in which the focal carboxyl group was blocked with methacryl units did not form gel in organic media such as chloroform or THF, whereas amide dendrons with a free carboxyl group at the focal point form self-organized structures. In the aqueous phase, 1M and 2M formed spherical vesicular assemblies. The dendronized polymers with first and second generation dendrons, 1P and 2P, respectively, exhibited lamellar and columnar organization in toluene. In addition to hydrogen bonding between the dendritic amide branches and van der Waals interactions between the alkyl periphery, steric confinement of dendritic side groups along the polymer backbone played a key role in the packing process of the dendronized polymers. In aqueous phase, 1P and 2P showed spherical vesicular aggregates with persistent stability in the presence of Triton X-100.     

Dendronized polymers with tailored surface groups

A series of polymers tethered with bis‐MPA dendrons was synthesized by a combination of divergent growth and atom transfer radical polymerization (ATRP). Macromonomers of first and second generation were synthesized utilizing the acetonide protected anhydride of bis‐MPA as the generic esterfication agent. The macromonomers were polymerized in a controlled fashion by ATRP utilizing Cu(I)/Cu(II) and N‐propyl‐2‐pyridylmethanamine as the halogen/ligand system. The end‐groups of these polymers were further tailored to achieve hydroxyl, acetate, and aliphatic hexadecyl functionality. With this approach all polymers will emanate from the same backbone, enabling for an evaluation of both the generation and end‐group dependent properties. Furthermore, a dendronized tri‐block copolymer was synthesized. All materials were analyzed by ¹H and ¹³C NMR, as well as size‐exclusion chromatography (SEC). The SEC analysis revealed that the molecular weights of the divergently grown dendronized polymers increased with increasing generation while the polydispersity (PDI) was kept low. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3852–3867, 2005     

Synthesis of dendronized polymer brushes containing metallo‐supramolecular polymer side chains

A new kind of dendronized polymer brush with metallo‐supramolecular polymer side chains was fabricated by a combination of macromonomer and graft‐to approach. The alternating copolymers of maleic anhydride and styryl macromonomers pendant with Fréchet‐type dendrons of three generations were reported previously. In this article, terpyridine groups were introduced along the backbone of the dendronized polymers through the amidolysis of anhydride groups. The terpyridine functionalized PEO linear chains were then incorporated through the complexation of terpyridine and Ru(II) ion. Thus, dendronized polymer brushes with amphiphilic properties were synthesized. AFM analysis showed worm‐like single molecular morphologies of the polymers of three generations, and ¹H NMR analysis indicated that such molecular brushes had an amphiphilic nature in solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3303–3310, 2007     

Homologous series of dendronized polymethacrylates with a methyleneoxycarbonyl spacer between the backbone and dendritic side chain: synthesis, characterization, and some bulk properties

First through fourth generation (G1-G4) dendronized macromonomers, 3, 5, 7, and 9, with a methyleneoxycarbonyl spacer between the polymerizable group and dendritic side chain (dendron) were synthesized, and their polymerization behavior to the corresponding dendronized polymers PG1s, PG2s, PG3s, and PG4s, respectively, was investigated by heating the monomers to 55 degrees C without intentional addition of initiator. This self-induced polymerization is referred to as thermally induced radical polymerization (TRP). The molar masses of PG1s-PG4s were determined by gel permeation chromatography in DMF calibrated to a recently developed G1 dendronized polymer standard (PG1). A comparison of this homologous series' polymerization results with those of an already existing one, which differed only by the lack of this spacer (referred to as PG1-PG4), was made to contribute to the issue of whether short spacers have an effect on polymerization. Several representatives of both series were also used in the first systematic and generation-dependent investigation of these unusual comb polymers' bulk properties. Both structure and dynamics were investigated by DSC, X-ray diffraction, and dynamic mechanical measurements.     

Synthesis and polymerization of first‐generation dendritic methacrylate macromonomers

First‐generation dendritic macromonomers with a methacryloyl end group on one side, long alkyl chains on the other side, and a biuret system with two urethane groups in the core have been synthesized. The synthesis comprises three steps with hexamethylene diisocyanate uretdione as the starting material. The branching points were introduced via biuret groups and the prepared macromonomers were polymerized by free and controlled radical polymerization. Depending on the reaction conditions linear dendronized polymers as well as branched dendronized polymers and microgels with long alkyl chains were obtained. Scanning force microscopy was used to visualize high molecular weight molecules spincoated on highly oriented pyrolytic graphite. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 614–628, 2007     

Synthesis of narrow‐polydispersity degradable dendronized aliphatic polyesters

The divergent dendronization of an ?‐caprolactone‐based polymer has been performed to provide access to dendronized polymers with sufficient biocompatibility and degradability for use as drug‐delivery scaffolds. The synthesis was performed through the tin(II) 2‐ethylhexanoate‐catalyzed polymerization of a γ‐functionalized ?‐caprolactone monomer, followed by the divergent growth of pendant polyester dendrons at each repeat unit. The resulting dendronized polymers were obtained up to the fourth generation with molecular weights as high as 80,000 Da and with polydispersities between 1.11 and 1.22. The fourth‐generation hydroxyl‐terminated dendronized polymer was degradable under a variety of aqueous conditions. A comparison of the dendronization approach with a procedure involving the ring‐opening polymerization of a second‐generation dendritic macromonomer reveals that the former procedure is best suited for the preparation of this family of dendronized polyesters because it requires shorter reaction times and affords materials with higher degrees of polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3563–3578, 2004     

Synthesis and characterization of poly(fluorene‐co‐alt‐phenylene) containing 1,3,4‐oxadiazole dendritic pendants

A series of poly(fluorene‐co‐alt‐phenylene)s containing various generations of dendritic oxadiazole (OXD) pendent wedges were synthesized by the Suzuki polycondensation of OXD‐functionalized 1,4‐dibromophenylene with 9,9‐dihexylfluorene‐2,7‐diboronic ester. The obtained polymers possessed excellent solubility in common solvents and good thermal stability. Photophysical studies showed that the dendronized polymers appended with higher generations of OXD dendrons exhibited enhanced photoluminescence efficiencies and narrower values of the full width at half‐maximum. This was attributed to the shielding effect induced by the bulky dendritic OXD side chains, which prevented self‐quenching and suppressed the formation of aggregates/excimers. The energy transfer from the OXD dendrons to the polymer backbones was very efficient when excitation of the peripheral OXD dendrons resulted mainly in the polymer backbone emission alone. In particular, the photoluminescence emission intensities by the sensitized excitations of OXD dendrons in solid films of the polymers were all stronger than those by the direct excitations of their polymer conjugated backbones. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6765–6774, 2006     

Synthesis,characterization, and self‐assembly of comb‐dendronized amphiphilic block copolymers

Novel amphiphilic comb‐dendronized diblock copolymers composed of hydrophobic Percec‐type dendronized polystyrene block and hydrophilic comb‐like poly(ethylene oxide) grafted polymethacrylate P(PEOMA) block were designed and synthesized via two steps of atom transfer radical polymerization (ATRP). The comb‐like P(PEOMA) prepared by ATRP of macromonomers (PEOMA) with two different molecular weights (M_n = 300 and 475) were used to initiate the sequent ATRP of dendritic styrene macromonomer (DS). The molecular weights and compositions of the obtained block copolymers were determined by ¹H NMR analysis. The copolymers with relatively narrow polydispersities (1.27–1.38) were thus obtained. The bulk properties of comb‐dendronized block copolymers were studied by using differential scanning calorimetry, polarized optical microscopy and wide‐angle X‐ray diffraction (WAXD). Similar to dendronized homopolymers, the block copolymers exhibited hexagonal columnar liquid‐crystalline phase structure. By using such amphiphilic comb‐dendronized block copolymers as building blocks, the rich self‐assembly morphologies, such as twisted string, vesicle, and large compound micelle (LCM), were obtained in a mixture of CH₃OH and THF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4205–4217, 2008     

Synthesis, structural analysis, and visualization of a library of dendronized polyphenylacetylenes

A library of eleven high cis-content cis-transoidal polyphenylacetylenes (PPAs) dendronized with self-assembling dendrons was prepared from a library of fifteen convergently synthesized macromonomers. Using [Rh(C triple bond CPh)(nbd)(PPh(3))(2)] (nbd=2,5-norbornadiene) in the presence of 10 equiv of N,N-dimethylaminopyridine, predictive control over molecular weight and narrow molecular weight distribution are obtained. The PPA backbone serves as a helical scaffold for the self-assembling dendrons. The dendron primary structure dictates the diameter of the cylindrical PPAs in bulk, both in the self-organized hexagonal columnar (Phi(h)) lattice determined by X-ray diffraction (XRD) and in monolayers on highly ordered pyrolytic graphite (HOPG) and mica visualized by atomic force microscopy (AFM). Thermal and bulk phase characteristics of the cylindrical PPAs reinforces the generality that flexible polymer backbones adopt a helical conformation within the cylindrical macromolecules generated by polymers jacketed with self-assembling dendrons.     

New ROMP Synthesis of Ferrocenyl Dendronized Polymers

First‐ and second‐generation Percec‐type dendronized ferrocenyl norbornene macromonomers containing, respectively, three and nine ferrocenyl termini are synthesized and polymerized by ring‐opening metathesis polymerization using Grubbs' third‐generation olefin metathesis catalyst with several monomer/catalyst feed ratios between 10 and 50. The rate of polymerization is highly dependent on the generation of the dendronized macromonomers, but all these ring‐opening metathesis polymerization reactions are controlled, and near‐quantitative monomer conversions are achieved. The numbers of ferrocenyl groups obtained are in agreement with the theoretical ones according to the cyclic voltammetry studies as determined using the Bard–Anson method.     

Comb‐like polymers pendanted with elastin‐like peptides showing sharp and tunable thermoresponsiveness through dynamic covalent chemistry

Comb‐like polymers carrying two elastin‐like polypeptide (ELP) pendants in each repeat unit were synthesized. The densely attached peptide chains afford these polymers with sharp thermally induced phase transitions, and their lower critical solution temperature (LCST) can be varied with molecular weights, solution pH and salt concentrations. Through amino terminals in ELP pendants, oligoethylene glycol (OEG)‐based dendrons cored with aldehyde were attached to the polymers through dynamic covalent imines. By virtue of dynamic characteristics of these novel dendronized polymers, their LCSTs can be tuned significantly by dendron coverage to shift from that dominated by ELPs to that dominated by OEG dendrons. Furthermore, dendron coverage can be enhanced obviously by the thermally induced phase transitions or greatly by freezing the polymer aqueous solutions. The work provides a convenient methodology to improve thermoresponsiveness of ELPs through polymer topology and to switch their properties through dynamic covalent chemistry. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3379–3387     

Dendronized polymers via Diels–Alder “click” reaction

A modular approach toward the synthesis of polymers containing dendron groups as side chains is developed using the Diels–Alder “click” reaction. For this purpose, a styrene‐based polymer appended with anthracene groups as reactive side chains was synthesized. First through third‐generation polyester dendrons containing furan‐protected maleimide groups at their focal point were synthesized. Facile, reagent‐free, thermal Diels–Alder cycloaddition between the anthracene‐containing polymer and latent‐reactive dendrons leads to quantitative functionalization of the polymer chains to afford dendronized polymers. The efficiency of this functionalization step was monitored using ¹H and ¹³C NMR spectroscopy and FTIR and UV–vis spectrometry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 410–416, 2010     

Self-organizable vesicular columns assembled from polymers dendronized with semifluorinated Janus dendrimers act as reverse thermal actuators

The synthesis and structural analysis of polymers dendronized with self-assembling Janus dendrimers containing one fluorinated and one hydrogenated dendrons are reported. Janus dendrimers were attached to the polymer backbone both from the hydrogenated and from the fluorinated parts of the Janus dendrimer. Structural analysis of these dendronized polymers and of their precursors by a combination of differential scanning calorimetry, X-ray diffraction experiments on powder and oriented fibers, and electron density maps have demonstrated that in both cases the dendronized polymer consists of a vesicular columnar structure containing fluorinated alkyl groups on its periphery. This vesicular columnar structure is generated by a mechanism that involves the intramolecular assembly of the Janus dendrimers into tapered dendrons followed by the intramolecular self-assembly of the resulting dendronized polymer in a vesicular column. By contrast with conventional polymers dendronized with self-assembling tapered dendrons this new class of dendronized polymers acts as thermal actuators that decrease the length of the supramolecular column when the temperature is increased and therefore, are called reverse thermal actuators. A mechanism for this reversed process was proposed.     

Thermoreversible cis-cisoidal to cis-transoidal isomerization of helical dendronized polyphenylacetylenes

High cis content (81-99%) cis-transoidal polyphenylacetylene (PPA) jacketed with amphiphilic self-assembling dendrons, poly[(3,4-3,5)mG2-4EBn] with m = 8, 10, 12, 14, 16, and (S)-3,7-dimethyloctyl, were synthesized by Rh(C triple bond CPh)(nbd)(PPh(3))(2) (nbd = 2,5-norbornadiene)/N,N-(dimethylamino)pyridine (DMAP) catalyzed polymerization of macromonomers. The resulting cylindrical PPAs self-organize into hexagonal columnar lattices with intracolumnar order (Phi(h)(io)) and without (Phi(h)). The polymers with m = 12, 14, and 16 exhibit also a hexagonal columnar crystal phase (Phi(h,k)). The reversible Phi(h,k)-to-Phi(h)(io)-to- Phi(h) phase transition in these dendronized PPAs was analyzed by a combination of differential scanning calorimetry and small and wide-angle X-ray diffraction experiments performed on powder and oriented fibers. In the Phi(h,k) and Phi(h)(io) phases, the dendronized PPAs form helical porous columns. The helical pore disappears in the Phi(h) phase. This change is accompanied by a decrease of the external column diameter that is induced by stretching of the polymer backbone along the axis of the cylinder. The helix sense of the porous PPA is selected by homochiral alkyl dendritic tails. This transition is generated by an unprecedented conversion of the PPA backbone from the cis-cisoidal conformation in the Phi(h,k) and Phi(h)(io) phases to the cis-transoidal conformation in the Phi(h) phase. Under the same conditions, the pristine cis-PPA undergoes cis-trans isomerization and irreversible intramolecular 6pi electrocyclization of 1,3-cis,5-hexatriene sequences followed by chain cleavage. These processes are eliminated in the dendronized cis-PPA below its decomposition temperature.     

Poly(thienyl‐phenylene)s with macromolecular side chains by oxidative polymerization of well‐defined macromonomers

Well‐defined polystyrene (PSt), poly(ε‐caprolactone) (PCL) or poly(2‐methyloxazoline) (POx) based polymers containing mid‐ or end‐chain 2,5‐ or 3,5‐dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP), ring opening polymerization (ROP), or cationic ring opening polymerization (CROP). These polymers were subsequently modified by Suzuki type coupling reactions with 2‐thiophene boronic acid. The resulting polymers, containing a conjugated sequence with 2‐thienyl groups at the extremities, could be further used as macromonomers in chemical oxidative polymerization in the presence of anhydrous FeCl₃. Poly(thienyl‐phenylene)s having the respective PSt or PCL chains as lateral subtituents were obtained in this way. All the starting, intermediate, or final polymers were structurally analyzed by spectroscopic methods (¹H and ¹³C NMR, IR) and gel permeation chromatography (GPC) measurements. Thermal behavior of the macromonomers and final polymers was investigated by differential scanning calorimetry (DSC) analyses. Optical properties of the polymers were monitored by UV and fluorescence spectroscopy. The emission spectra of the polymers show a clear bathochromic shift of the λ_max emission in all the cases with respect to the monomers because of the extending of the conjugation length. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 848–865, 2007.     

Comparison of Loading Efficiency between Hyperbranched Polymers and Cross‐Linked Nanogels at Various Branching Densities

The effect of branching point structures and densities is studied between azido‐containing hyperbranched polymers and cross‐linked nanogels on their loading efficiency of alkynyl‐containing dendron molecules. Hyperbranched polymers that contained “T”‐shaped branching linkage from which three chains radiated out and cross‐linked nanogels that contained “X”‐shaped branching linkage with four radiating chains are synthesized in microemulsion using either atom transfer radical polymerization (ATRP) or conventional radical polymerization (RP) technique. Both polymers have similar density of azido groups in the structure and exhibit similar hydrodynamic diameter in latexes before purification. Subsequent copper‐catalyzed azide–alkyne cycloaddition reactions between these polymers and alkynyl‐containing dendrons in various sizes (G1–G3) demonstrate an order of dendron loading efficiencies (i.e., final conversion of alkynyl‐containing dendron) as hyperbranched polymers > nanogels synthesized by ATRP > nanogels synthesized by RP. Decreasing the branching density or using smaller dendron molecules increases the click efficiency of both polymers. When G2 dendrons with a molecular weight of 627 Da are used to click with the hyperbranched polymers composed of 100% inimer, a maximum loading efficiency of G2 in the loaded hyperbranched polymer is 58% of G2 by weight. These results represent the first comparison between hyperbranched polymers and cross‐linked nanogels to explore the effect of branching structures on their loading efficiencies.