Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

Heat capacity and enthalpy of fusion of pyrimethanil laurate (C24H37N3O2)

Low-temperature heat capacities of pyrimethanil laurate (C₂₄H₃₇N₃O₂) were precisely measured with an automated adiabatic calorimeter over the temperature range between T = 78 K and T = 340 K. The sample was observed to melt at (321.52 ± 0.04) K. The molar enthalpy and entropy of fusion as well as the chemical purity of the compound were determined to be (67244 ± 11) J · mol⁻¹, (209.28 ± 0.02) J · mol⁻¹ · K⁻¹, (0.9943 ± 0.0004) mass fraction, respectively. The extrapolated melting temperature for the absolutely pure compound obtained from fractional melting experiments was (322.264 ± 0.006) K.     

Heat capacities,third-law entropies and thermodynamic functions of the geometrically frustrated antiferromagnetic spinels GeCo2O4 and GeNi2O4 from T=(0 to 400) K

The molar heat capacities of GeCo₂O₄ and GeNi₂O₄, two geometrically frustrated spinels, have been measured in the temperature range from T=(0.5 to 400) K. Anomalies associated with magnetic ordering occur in the heat capacities of both compounds. The transition in GeCo₂O₄ occurs at T=20.6 K while two peaks are found in the heat capacity of GeNi₂O₄, both within the narrow temperature range between 11.4<(T/K)<12.2. Thermodynamic functions have been generated from smoothed fits of the experimental results. At T=298.15 K the standard molar heat capacities are (143.44 ± 0.14) J · K⁻¹ · mol⁻¹ for GeCo₂O₄ and (130.76 ± 0.13) J · K⁻¹ · mol⁻¹ for GeNi₂O₄. The standard molar entropies at T=298.15 K for GeCo₂O₄ and GeNi₂O₄ are (149.20 ± 0.60) J · K⁻¹ · mol⁻¹ and (131.80 ± 0.53) J · K⁻¹ · mol⁻¹ respectively. Above 100 K, the heat capacity of the cobalt compound is significantly higher than that of the nickel compound. The excess heat capacity can be reasonably modeled by the assumption of a Schottky contribution arising from the thermal excitation of electronic states associated with the CO²⁺ ion in a cubic crystal field. The splittings obtained, 230 cm⁻¹ for the four-fold-degenerate first excited state and 610 cm⁻¹ for the six-fold degenerate second excited state, are significantly lower than those observed in pure CoO.     

The thermodynamic properties of DyBr3(s) and DyI3(s) from T=5 K to their melting temperatures

Low-temperature calorimetric measurements have been performed on DyBr₃(s) in the temperature range (5.5 to 420 K ) and on DyI₃(s) from T=4 K to T=420 K. The data reveal enhanced heat capacities below T=10 K, consisting of a magnetic and an electronic contribution. From the experimental data on DyBr₃(s) a C⁰_p,m (298.15 K) of (102.2±0.2) J·K⁻¹·mol⁻¹ and a value for {S⁰_m (298.15 K) − S⁰_m (5.5 K)} of (205.5±0.5) J·K⁻¹·mol⁻¹, have been obtained. For DyI₃(s), {S⁰_m (298.15 K) − S⁰_m (4 K)} and C⁰_p,m (298.15 K) have been determined as (226.9±0.5) J·K⁻¹·mol⁻¹ and (103.4±0.2) J·K⁻¹·mol⁻¹, respectively. The values for {S⁰_m (5.5 K) − S⁰_m (0)} for DyBr₃(s) and {S⁰_m (4 K) − S⁰_m (0)} for DyI₃(s) have been calculated, giving S⁰_m (298.15 K)=(212.3±0.9) J·K⁻¹·mol⁻¹ in case of DyBr₃(s) and S⁰_m (298.15 K) =(233.1±0.7) J·K⁻¹·mol⁻¹ for DyI₃(s). The high-temperature enthalpy increment has been measured for DyBr₃(s) in the temperature range (525 to 799 K) and for DyI₃(s) in the temperature range (525 to 627 K). From the results obtained and enthalpies of formation from the literature, thermodynamic functions for DyBr₃(s) and DyI₃(s) have been calculated from T→0 to their melting temperatures at 1151.0 K and 1251.5 K, respectively.     

Low-temperature thermal properties of 2,2-dimethyl-1,3-propanediol and its deuterated analogues

Heat capacities of 2,2-dimethyl-1,3-propanediol(CH₃)₂C(CH₂OH)₂ were measured in the temperature range between T =  13 K and T =  350 K using an adiabatic calorimeter. The compound underwent a first-order phase transition at T =  (314.5  ±  0.1) K. The enthalpy and the entropy of transition were (12.52  ±  0.02)kJ · mol ^− 1and (39.81  ±  0.08)J · K ^− 1· mol ^− 1, respectively. Measurement of the fusion peak by d.s.c. showed that the purity of the sample was 0.9999 mass fraction and the entropy of fusion was 9.9 J · K ^− 1· mol ^− 1. Another first-order phase transition was observed at T =  (60.4  ±  0.1) K with the associated entropy change of (2.93  ±  0.05)J · K ^− 1· mol ^− 1. Heat capacities of two deuterated samples,(CH₃)₂C(CH₂OD)₂ and(CD₃)₂C(CD₂OD)₂ , were also measured and the results were compared with those on the natural compound. Possible mechanisms of the transition have been discussed from the isotope effects on the thermodynamic quantities associated with the transition. Standard thermodynamic functions of the compounds are tabulated.     

Destabilization in the isomeric nitrobenzonitriles: an experimental thermochemical study

The enthalpies of combustion and of sublimation, respectively, of the three isomeric nitrobenzonitriles have been measured: o-, {(−3456.3±2.9), (88.1±1.4)} kJ·mol⁻¹; m-, {(−3442.8±3.3), (92.8±0.3)} kJ·mol⁻¹; p-, {(−3448.2±3.6), (91.1±1.3)} kJ·mol⁻¹. In turn, from these values, the standard molar enthalpies of formation for the condensed and gaseous state, respectively, have been derived: o-, {(130.1±3.1), (218.2±3.4)} kJ·mol⁻¹; m-, {(116.5±3.5), (209.3±3.5)} kJ·mol⁻¹; p-, {(122.0±3.8), (213.1±4.0)} kJ·mol⁻¹. Destabilization energies associated with the presence of the two electron-withdrawing groups have been determined, for o-, m-, and p-nitrobenzonitrile, {(17.6±4.1), (8.7±4.2), and (12.5±4.6)} kJ·mol⁻¹, respectively, and are consistent with those obtained for the corresponding sets of isomeric methyl benzenedicarboxylates, dicyanobenzenes, dinitrobenzenes, and (neutral and ionized) nitrobenzoic acids.     

Heat capacities,third-law entropies and thermodynamic functions of the negative thermal expansion material Zn2GeO4 from T=(0 to 400) K

The molar heat capacity of Zn₂GeO₄, a material which exhibits negative thermal expansion below ambient temperatures, has been measured in the temperature range 0.5⩽(T/K)⩽400. At T=298.15 K, the standard molar heat capacity is (131.86 ± 0.26) J · K⁻¹ · mol⁻¹. Thermodynamic functions have been generated from smoothed fits of the experimental results. The standard molar entropy at T=298.15 K is (145.12 ± 0.29) J · K⁻¹ · mol⁻¹. The existence of low-energy modes is supported by the excess heat capacity in Zn₂GeO₄ compared to the sums of the constituent binary oxides.     

Molar heat capacity and thermodynamic properties of 1-cyclohexene-1,2-dicarboxylic anhydride [C8H8O3]

The molar heat capacity C_p,m of 1-cyclohexene-1,2-dicarboxylic anhydride was measured in the temperature range from T=(80 to 360) K with a small sample automated adiabatic calorimeter. The melting point T_m, the molar enthalpy Δ_fusH_m and the entropy Δ_fusS_m of fusion for the compound were determined to be (343.46 ± 0.24) K, (11.88 ± 0.02) kJ · mol⁻¹ and (34.60 ± 0.06) J · K⁻¹ · mol⁻¹, respectively. The thermodynamic functions [H_(T)−H_(298.15)] and [S_(T)−S_(298.15)] were derived in the temperature range from T=(80 to 360) K with temperature interval of 5 K. The mass fraction purity of the sample used in the adiabatic calorimetric study was determined to be 0.9928 by using the fractional melting technique. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the process of the mass-loss of the sample was due to the evaporation, instead of its thermal decomposition.     

The standard molar enthalpy of formation,molar heat capacities,and thermal stability of anhydrous caffeine

The constant-volume energy of combustion of crystalline anhydrous caffeine (C₈H₁₀N₄O₂) in α (lower temperature steady) crystal form was measured by a bomb combustion calorimeter, the standard molar enthalpy of combustion of caffeine at T = 298.15 K was determined to be −(4255.08 ± 4.30) kJ · mol⁻¹, and the standard molar enthalpy of formation was derived as −(322.15 ± 4.80) kJ · mol⁻¹. The heat capacity of caffeine in the same crystal form was measured in the temperature range from (80 to 387) K by an adiabatic calorimeter. No phase transition or thermal anomaly was observed in the above temperature range. The thermal behavior of the compound was further examined by thermogravimetry (TG), differential thermal analysis (DTA) over the range from (300 to 700) K and by differential scanning calorimetry (DSC) over the range from (300 to 540) K, respectively. From the above thermal analysis a (solid–solid) and a (solid–liquid) phase transition of the compound were found at T = (413.39 and 509.00) K, respectively; and the corresponding molar enthalpies of these transitions were determined to be (3.43 ± 0.02) kJ · mol⁻¹for the (solid–solid) transition, and (19.86 ± 0.03) kJ · mol⁻¹ for the (solid–liquid) transition, respectively.     

The molar enthalpies of solution and vapour pressures of saturated aqueous solutions of some cesium salts

Vapour pressures of water over saturated solutions of cesium chloride, cesium bromide, cesium nitrate, cesium sulfate, cesium formate, and cesium oxalate were determined as a function of temperature. These vapour pressures were used to evaluate the water activities, osmotic coefficients and molar enthalpies of vapourization. Molar enthalpies of solution of cesium chloride, Δ_solH_m(T = 295.73 K; m = 0.0622 mol · kg⁻¹) = (17.83 ± 0.50) kJ · mol⁻¹; cesium bromide, Δ_solH_m(T = 293.99 K; m = 0.0238 mol · kg⁻¹) = (26.91 ± 0.59) kJ · mol⁻¹; cesium nitrate, Δ_solH_m(T = 294.68 K; m = 0.0258 mol · kg⁻¹) = (37.1 ± 2.3) kJ · mol⁻¹; cesium sulfate, Δ_solH_m(T = 296.43 K; m = 0.0284 mol · kg⁻¹) = (16.94 ± 0.43) kJ · mol⁻¹; cesium formate, Δ_solH_m(T = 295.64 K; m = 0.0283 mol · kg⁻¹) = (11.10 ± 0.26) kJ · mol⁻¹ and Δ_solH_m(T = 292.64 K; m = 0.0577 mol · kg⁻¹) = (11.56 ± 0.56) kJ · mol⁻¹; and cesium oxalate, Δ_solH_m(T = 291.34 K; m = 0.0143 mol · kg⁻¹) = (22.07 ± 0.16) kJ · mol⁻¹ were determined calorimetrically. The purity of the chemicals was generally greater than 0.99 mass fraction, except for HCOOCs and (COOCs)₂ where purities were approximately 0.95 and 0.97 mass fraction, respectively. The uncertainties are one standard deviations.     

Thermodynamic properties of Na2Ti6O13 and Na2Ti3O7: electrochemical and calorimetric determination

Standard values of Gibbs free energy, entropy, and enthalpy of Na₂Ti₆O₁₃ and Na₂Ti₃O₇ were determined by evaluating emf-measurements of thermodynamically defined solid state electrochemical cells based on a Na–β″-alumina electrolyte. The central part of the anodic half cell consisted of Na₂CO₃, while two appropriate coexisting phases of the ternary system Na–Ti–O are used as cathodic materials. The cell was placed in an atmosphere containing CO₂ and O₂. By combining the results of emf-measurements in the temperature range of 573⩽T/K⩽1023 and of adiabatic calorimetric measurements of the heat capacities in the low-temperature region 15⩽T/K⩽300, the thermodynamic data were determined for a wide temperature range of 15⩽T/K⩽1100. The standard molar enthalpy of formation and standard molar entropy at T=298.15 K as determined by emf-measurements are Δ_fH_m⁰=(−6277.9±6.5) kJ · mol⁻¹ and S_m⁰=(404.6±5.3) J · mol⁻¹ · K⁻¹ for Na₂Ti₆O₁₃ and Δ_fH_m⁰=(−3459.2±3.8) kJ · mol⁻¹ and S_m⁰=(227.8±3.7) J · mol⁻¹ · K⁻¹ for Na₂Ti₃O₇. The standard molar entropy at T=298.15 K obtained from low-temperature calorimetry is S_m⁰=399.7 J · mol⁻¹ · K⁻¹ and S_m⁰=229.4 J · mol⁻¹ · K⁻¹ for Na₂Ti₆O₁₃ and Na₂Ti₃O₇, respectively. The phase widths with respect to Na₂O content were studied by using a Na₂O-titration technique.     

Thermochemistry of some barium compounds

The molar enthalpies of reaction of metallic barium with 0.047 mol·dm⁻³ HClO₄ as well as the molar enthalpies of dissolution of BaCl₂ in 1.01 mol·dm⁻³ HCl and in water have been measured at T=298.15 K in a sealed swinging calorimeter with an isothermal jacket. From these results the standard molar enthalpy of formation of the barium ion in an aqueous solution at infinite dilution, as well as the enthalpies of formation of barium chloride and barium perchlorate, are calculated to be: Δ_fH⁰_m(Ba²⁺,aq)=−(535.83±1.25) kJ · mol⁻¹; Δ_fH⁰_m(BaCl₂,cr)=−(855.66±1.28) kJ · mol⁻¹; and Δ_fH⁰_m(BaClO₄,cr)=−(796.26±1.35) kJ · mol⁻¹. The results obtained are discussed and compared with previous experimental values.     

The investigation of thermodynamic parameters of kinetic reaction between o-phenylenediamine and gold (III)

A visible spectrophotometric method has been developed for the reaction kinetics of o-phenylenediamine in the presence of gold (III). The method is based on the measurement of the absorbance of the reaction o-phenylenediamine and gold (III). Optimum conditions for the reaction were established as pH 6 at λ = 466 nm.When the reaction kinetic of o-phenylenediamine by gold (III) was investigated, it was observed that the following rate formula was found as ln (A/A₀) = −kt, according to absorbance measurements. The activation energy E_a and Arrhenius constant A were calculated from the Arrhenius equation as 1.009 kJ · mol⁻¹ and 3.46 · 10⁻² s⁻¹, respectively. Other activation thermodynamic parameters, entropy, ΔS (J · mol⁻¹ · K⁻¹), enthalpy, ΔH (kJ · mol⁻¹), Gibbs free energy, ΔG (kJ · mol⁻¹) and equilibrium constant, K_e were calculated at T = (283.2, 303.2, 323.2, and 343.2) K. The study was exothermic due to the decrease of entropy and was a non-spontaneous process during activation.     

Standard Gibbs energy of formation of platinic acid H2Pt(OH) 6in the crystalline state

Heat capacity of platinic acid, hydrogen hexahydroxyplatinate(IV)H₂Pt(OH)₆ , was measured from T =  7 K toT =  310 K by means of adiabatic calorimetry. The standard entropy and the standard Gibbs energy of formation of platinic acid in the crystalline state were determined to be 176.5  ±  3.6 J · K ^− 1· mol ^− 1and  − 988.8  ±  3.8 kJ · mol ^− 1, respectively.     

Synthesis,structure and thermochemical study of a cobalt energetic coordination compound incorporating 3,5-diamino-1,2,4-triazole and pyridine-2,6-dicarboxylic acid

An energetic coordination compound [Co₂(C₂H₅N₅)₂(C₇H₃NO₄)₂(H₂O)₂]·2H₂O (Hdatrz(C₂H₅N₅) = 3,5-diamino-1,2,4-triazole, H₂pda(C₇H₅NO₄) = pyridine-2,6-dicarboxylic acid) has been synthesized and characterized by elemental analysis, chemical analysis, IR spectroscopy, single-crystal X-ray diffraction and thermal analysis. X-ray diffraction analysis confirmed that the compound possessed a di-nuclear unit and featured a 3D super-molecular structure. Furthermore, a reasonable thermochemical cycle was designed based on the preparation reaction of the compound and the standard molar enthalpy of dissolution of reactants and products was measured by the RD496-2000 calorimeter. Finally, the standard molar enthalpy of formation of the compound was determined to be −(2475.0 ± 3.1) kJ · mol⁻¹ in accordance with Hess’s law. In addition, the specific heat capacity of the compound at T = 298.15 K was determined to be (1.13 ± 0.02) J · K⁻¹ · g⁻¹ by RD496-2000 calorimeter.     

Thermodynamics of the oxidation–reduction reaction {2 glutathionered(aq) + NADPox(aq)=glutathioneox(aq) + NADPred(aq)}

Microcalorimetry, spectrophotometry, and high-performance liquid chromatography (h.p.l.c.) have been used to conduct a thermodynamic investigation of the glutathione reductase catalyzed reaction {2 glutathione_red(aq) + NADP_ox(aq)=glutathione_ox(aq) + NADP_red(aq)}. The reaction involves the breaking of a disulfide bond and is of particular importance because of the role glutathione_red plays in the repair of enzymes. The measured values of the apparent equilibrium constant K^′ for this reaction ranged from 0.5 to 69 and were measured over a range of temperature (288.15 K to 303.15 K), pH (6.58 to 8.68), and ionic strength I_m (0.091 mol · kg⁻¹ to 0.90 mol · kg⁻¹). The results of the equilibrium and calorimetric measurements were analyzed in terms of a chemical equilibrium model that accounts for the multiplicity of ionic states of the reactants and products. These calculations led to values of thermodynamic quantities at T=298.15 K and I_m=0 for a chemical reference reaction that involves specific ionic forms. Thus, for the reaction {2 glutathione_red⁻(aq) + NADP_ox³⁻(aq)=glutathione_ox²⁻(aq) + NADP_red⁴⁻(aq) + H⁺(aq)}, the equilibrium constant K=(6.5±4.4)·10⁻¹¹, the standard molar enthalpy of reaction Δ_rH^o_m=(6.9±3.0) kJ · mol⁻¹, the standard molar Gibbs free energy change Δ_rG^o_m=(58.1±1.7) kJ · mol⁻¹, and the standard molar entropy change Δ_rS^o_m=−(172±12) J · K⁻¹ · mol⁻¹. Under approximately physiological conditions (T=311.15 K, pH=7.0, and I_m=0.25 mol · kg⁻¹ the apparent equilibrium constant K^′≈0.013. The results of the several studies of this reaction from the literature have also been examined and analyzed using the chemical equilibrium model. It was found that much of the literature is in agreement with the results of this study. Use of our results together with a value from the literature for the standard electromotive force E^o for the NADP redox reaction leads to E^o=0.166 V (T=298.15 K and I=0) for the glutathione redox reaction {glutathione_ox²⁻(aq) + 2 H⁺(aq) + 2 e⁻=2 glutathione_red⁻(aq)}. The thermodynamic results obtained in this study also permit the calculation of the standard apparent electromotive force E^′o for the biochemical redox reaction {glutathione_ox(aq) + 2 e⁻=2 glutathione_red(aq)} over a wide range of temperature, pH, and ionic strength. At T=298.15 K, I=0.25 mol · kg⁻¹, and pH=7.0, the calculated value of E^′o is −0.265 V.     

High-temperature calorimetry of zirconia: Heat capacity and thermodynamics of the monoclinic–tetragonal phase transition

The high-temperature heat capacity of zirconia was directly measured by differential scanning calorimetry between T = (1050 and 1700) K and derived from the heat content measured by transposed temperature drop calorimetry between T = (970 and 1770) K, including the monoclinic–tetragonal (m–t) phase transition region. The enthalpy and entropy of the m–t phase transition are (5.43 ± 0.31) kJ · mol⁻¹ and (3.69 ± 0.21) J · K⁻¹ · mol⁻¹, respectively. Values of thermodynamic functions are provided from room temperature to 2000 K.     

The vapour pressures of saturated aqueous solutions of magnesium,calcium, nickel and zinc acetates and molar enthalpies of solution of magnesium,calcium, zinc and lead acetates

Vapour pressures of water over saturated solutions of magnesium, calcium, nickel and zinc acetates were determined as a function of temperature. The vapour pressures served to evaluate the water activities, osmotic coefficients and molar enthalpies of vaporization. Molar enthalpies of solution of magnesium acetate tetrahydrate,Δ_solH_m (T =  294.71K ;m =  0.01 mol · kg ^− 1)  =  − (15.65  ±  0.97)kJ · mol ^− 1; calcium acetate,Δ_solH_m (T =  297.18K ;m =  0.01 mol · kg ^− 1)  =  − (28.15  ±  0.28)kJ · mol ^− 1; zinc acetate dihydrate,Δ_solH_m (T =  297.36K ;m =  0.01 mol · kg ^− 1)  =  − (22.49  ±  0.90)kJ · mol ^− 1and lead acetate trihydrate,Δ_solH_m (T =  297.36K ;m =  0.0086 mol · kg ^− 1)  =  (22.46  ±  0.94)kJ · mol ^− 1, were determined calorimetrically.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.