Polymerization of ethylene with (C5Me5)2Zr(NMe2)2 cocatalyzed by common alkyl aluminums

Polymerizations of ethylene have been carried out by using Cp₂^*Zr(NMe₂)₂ (Cp^*=C₅Me₅) compound combined with common alkyl aluminums (AlR₃) and methylaluminoxane (MAO) as cocatalysts. The AlMe₃ cocatalyzed system showed no activity due to the formation of stable but inactive heterodinuclear [Cp₂^*2Zr(μ-Me)₂AlMe₂]⁺ cations; however, the bulkier AlR₃ [AlEt₃, Al(i-Bu)₃ and Al(i-Bu)₂H] cocatalyzed systems showed very high activities. Especially, Cp₂^*Zr(NMe₂)₂/Al(i-Bu)₃ catalyst showed higher catalytic activity and produced higher molecular weight (MW) polymer than Cp₂^*Zr(NMe₂)₂/MAO catalyst, demonstrating both MAO and bulky AlR₃ are effective cocatalysts for Cp₂^*Zr(NMe₂)₂ compound.     

The reactivity of dimethylaluminum hydride with the aminoarsines Me2AsNMe2, MeAs(NMe2)2, and As(NMe2)3

The reactions of (Me₂AlH)₃ with Me₂AsNMe₂, MeAs(NMe₂)₂, and As(NMe₂)₃ were investigated as a function of time at room temperature and over the temperature range −90 to 24°C by use of ¹H and ¹³C NMR spectroscopy. (Me₂AlH)₃ was found to be very reactive toward the aminoarsines, even at −90°C, and no stable Me₂AlH-aminoarsine adducts were observed. Instead, the initial stages of the reactions involved AS---N bond cleavage with the generation of highly reactive AlN- and AsH-bonded species. The subsequent course of each reaction and the final arsenic-containing product distribution depended upon the original AL:N stoichiometric ratio and the respective aminoarsine. When the Al:N ratio was 1:1, the reactions were straightforward for each aminoarsine. However, in every case, [Me₂AlNMe₂]₂ was the final AlN-containing product. Independent reactions were carried out to verify many of the proposed decomposition pathways that lead to thermodynamically stable products. The results of this study are compared with those of the analogous, previously reported (Me₃Al)₂-aminoarsine systems. Additionally, a new synthetic route to [Me₂AlAsMe₂]₃ has been established from the reaction of (Me₂AlH)₃ with Me₂AsH.     

Tetrakisdimethylamidozirconium and its dimethylamido lithium adduct: Structures of [zr(nme2)4]2 and zr(nme2)6li2(thf)2

The molecular structure of [Zr(NMe₂)₄]₂ has been determined by an x-ray study and shown to involve a central Zr₂N₈ moiety involving the fusing of two trigonal bipyramidal units along a common axial-equatorial edge. The terminal Zr---NMe₂ units have trigonal planar coordination about the nitrogen atoms: Zr---N = 2.050(5) and 2.104(5) Å, and Zr---N (bridge) = 2.224(3) and 2.453(4) Å for equatorial and axial bonds, respectively. The Zr---Zr distance is 3.704(1) Å as expected for a non-M---M bonding bridged compound. In tetrahydrofuran solution, Zr(NMe₂)₄ and LiNMe₂ react irreversibly giving Zr(NMe₂)₆ Li₂(THF)₂ which has been isolated and characterized by an X-ray study. The central ZrN₆ octahedral moiety is capped on two opposite faces by Li atoms which are also coordinated to an oxygen atom of a THF molecule. Pertinent distances are: Zr---N = 2.22(7) (av.), N---Li = 2.155(25) (av.) and Li---O = 1.915(10) Å.     

Synthesis and structure of ansa-cyclopentadienyl pyrrolyl titanium complexes: [(η-C5H4)CH2(2-C4H3N)]Ti(NMe2)2 and [1,3-{CH2(2-C4H3N)}2(η-C5H3)]Ti(NMe2)

Reaction of ansa-cyclopentadienyl pyrrolyl ligand (C₅H₅)CH₂(2-C₄H₃NH) (2) with Ti(NMe₂)₄ affords bis(dimethylamido)titanium complex [(η⁵-C₅H₄)CH₂(2-C₄H₃N)]Ti(NMe₂)₂ (3) via amine elimination. A cyclopentadiene ligand with two pendant pyrrolyl arms, a mixture of 1,3- and 1,4-{CH₂(2-C₄H₃NH)}₂C₅H₄ (4), undergoes an analogous reaction with Ti(NMe₂)₄ to give [1,3-{CH₂(2-C₄H₃N)}₂(η⁵-C₅H₃)]Ti(NMe₂) (5). Molecular structures of 3 and 5 have been determined by single crystal X-ray diffraction studies.     

The tungsten-tungsten triple bond---18. Bridging and terminal allyl ligands in complexes of the formula W2(R)2(NMe2)4, where R = C3H5 and C4H7

The reaction between RMgCl (two equivalents) and 1,2-W₂Cl₂(NMe₂)₄ in hydrocarbon solvents affords the compounds W₂R₂(NMe₂)₄, where R = allyl and 1− and 2-methyl-allyl. In the solid state the molecular structure of W₂(C₃H₅)₂(NMe₂)₄ has C₂ symmetry with bridging allyl ligands and terminal W---NMe₂ ligands. The W---W distance 2.480(1) Å and the C---C distances, 1.47(1) Å, imply an extensive mixing of the allyl π-MOs with the WW π-MOs, and this is supported by an MO calculation on the molecule W₂(C₃H₅)₂(NH₂)₄ employing the method of Fenske and Hall. The most notable interaction is the ability of the (WW)⁶⁺ centre to donate to the allyl π^*-MO (π₃). This interaction is largely responsible for the long W---W distance, as well as the long C---C distances, in the allyl ligand. The structure of the 2-methyl-allyl derivative W₂(C₄H₇)₂(NMe₂)₄ in the solid state reveals a gauche-W₂C₂N₄ core with W---W = 2.286(1) Å and W---C = 2.18(1) Å, typical of WW and W---C triple and single bonds, respectively. In solution (toluene-d₈) ¹H and ¹³C NMR spectra over a temperature range −80°C to +60°C indicate that both anti- and gauche- W₂C₂N₄ rotamers are present for the 2-methyl-allyl derivative. In addition, there is a facile fluxional process that equilibrates both ends of the 2-methyl-allyl ligand on the NMR time-scale. This process leads to a coalescence at 100°C and is believed to take place via an η³-bound intermediate. The 1-methyl-allyl derivative also binds in an η¹ fashion in solution and temperature-dependent rotations about the W---N, W---C and C=C bonds are frozen out at low temperatures. The spectra of the allyl compound W₂(C₃H₅)₂(NMe₂)₄ revealed the presence of two isomers in solution—one of which can be readily reconciled with the presence of the bridging isomer found in the solid state while the other is proposed to be W₂(η³-C₃H₅)₂(NMe₂)₄. The compound W₂R₂(NMe₂)₄ where R = 2,4-dimethyl- pentadiene was similarly prepared and displayed dynamic NMR behaviour explainable in terms of facile η¹ = η³ interconversions.     

Komplexe mit kohlenstoffsulfiden und -seleniden als liganden : X. Synthese und kristallstruktur von C5H5(PMe3)Co(μ-CS)2CoC5H5: Ein zweikernkomplex mit unsymmetrischen Co(CS)Co-brückenbindungen

The complex C₅H₅(PMe₃)Co(μ-CS)₂CoC₅H₅ (I) is formed by the reaction of C₅H₅Co(PMe₃)CS and CH₂I₂. The X-ray structure analysis shows an unsymmetrical non-planar Co₂C₂-skeleton with different Co---C bond lengths. The Co---Co distance is 239.2 pm. Compound I thus represents a new example of binuclear (18 + 16)-electron complexes in which the more electron-rich metal atom forms a donor bond to the more electron-poor counterpart. The reaction of I with ligands such as P(NMe₂)₃ does not lead to bridge cleavage indicating the stability of the Co(CS)₂Co-framework.     

Preparation and characterization of M2(SeAr′)6 and mixed ligand M2(OR)2(SeAr′)4 species (M = Mo, W)

Toluene solutions of M₂(NMe₂)₆ (M = Mo, W) react with mesitylene selenol (Ar′SeH) to give M₂(SeAr′) ₆ complexes. MO₂(OR)₆ (R = ^tBu, CH₂^tBu) react with excess> 6 fold) Ar′SeH to give Mo₂ (SeAr′)₆, whilst W₂(OR)₆(py)₂ (R = ⁱPr, CH₂^tBu) react with excess (> 6 fold) Ar′SeH to give W₂(OR)₂(SeAr′)₄. Reaction of MO₂(OPrⁱ)₆ with Ar′SeH produces Mo₂(OPrⁱ)₂ (SeAr′)₄ which crystallizes in two different space groups. These areneselenato complexes are air-stable and insoluble in common organic solvents. X-ray crystallographic studies revealed that the Mo₂(SeAr′)₆ and W₂(SeAr′)₆ compounds are isostructural in the solid state and adopt ethane-like staggered configurations with the following important structural parameters, M---M (W---W/Mo---Mo) 2.3000(11)/2.2175(13) Å, M---Se 2.430 (av.)/2.440 (av.) Å, M---M---SE 97.0° (av.)°. In the solid state W₂(OⁱPr)₂(SeAr′)₄ adopts the anti-configuration with crystallographically imposed C_i symmetry and W---W 2.3077(7) Å, W---Se 2.435 (av.) Å, W---O 1.858(6) Å; W---W---SE 100.27(3)°, 93.8(3)° and W---W---O 108.41(17)°. Mo₂(OPrⁱ)₂(SeAr′) ₄ crystallizes in both P and A2/a space groups in which the molecules are isostructural with each other and the tungsten analogue. Important bond lengths and angles are Mo---Mo 2.180(24) Å, Mo---Se 2.432(av.) Å, Mo---O 1.872(9) Å, Mo---Mo---Se 99.39(9)°, 94.71(8)°, Mo---Mo---O 107.55(28)°.     

Dimethylchalkogenide als liganden in kationischen cyclopentadienyleisen-bis(phosphin)-komplexen: synthese, reaktivität und kristallstruktur von [C5H5Fe(P(OCH3)3)2(S(CH3)2)]PF6

Thermal displacement of coordinated nitriles RCN (R = CH₃, C₂H₅ or n-C₃H₇) in [C₅H₅Fe(L₂)(NCR)]X complexes (L₂ = P(OCH₃)₃)₂, (P(OC₆H₅)₃)₂ or (C₆H₅)₂PC₂H₄P(C₆H₅)₂ (DPPE)) by E(CH₃)₂ affords high yields of [C₅H₅Fe(L₂)(E(CH₃)₂)]X compounds (E = S, Se and Te; X = BF₄ or PF₆). Spectroscopic data and ligand displacement reactions are presented and discussed together with related observations on [C₅H₅Fe(CO)₂(E(CH₃)₂)]BF₄ compounds. The molecular structure of [C₅H₅Fe(P(OCH₃)₃)₂(S(CH₃)₂)]PF₆ was determined by a single-crystal X-ray diffraction study: monoclinic, space group P2₁/n-C⁵_2h (No. 14) with a = 8.4064(12), b = 11.183(2), c = 50.726(8) Å, β = 90.672(13)° and Z = 8 molecules per unit cell. The coordination sphere of the iron atom is pseudo-tetrahedral with an Fe---S bond distance of 2.238 Å.     

Reductive nitrosylation of tetraoxometallates—XVII. Molybdate-hydroxylamine-cyanide reaction, and synthesis and characterization of K2[Mo(NO)(CN)5] and (NMe4)2[Mo(NO)(CN)4]

A reaction condition is established which determines the nature of the products in the molybdate-hydroxylamine-cyanide reaction. With hydroxylamine always used in excess, it is the hydroxyl ion concentration of the reaction mixture which plays a vital role in determining whether K₄[Mo(NO)(CN)₅] or K₂[Mo(NO)(CN)₅] is obtained exclusively. The latter product is hereby reported for the first time. Its powder diffractogram being typical of a cubic system, a gross structural characterization has been made possible. The former under aqueous, aerobic conditions yields a new product, (NMe₄)₂[Mo(NO)(CN)₄].     

Geometrical isomerization of fac/mer-Mo(CO)3(phosphite)3 and cis/trans-Mo(CO)4(phosphite)2 catalyzed by Me3SiOSO2CF3

Geometrical isomerization of fac-Mo(CO)₃L₃ (L = P(OPh)₃, P(OMe)₃, P(OEt)₃) to the mer form and that of cis-Mo(CO)₄L₂ (L = P(OPh)₃, P(OMe)₃, PPh₂(OMe)) to the trans form were observed in CH₂Cl₂ at room temperature in the presence of a catalytic amount of Me₃SiOSO₂CF₃ (TMSOTf). Crossover experiments suggest that a ligand dissociation is not involved in the isomerization. A catalytic cycle involving an interaction of the silicon atom in Me₃Si⁺ with one oxygen in P(OR)₃ ligands has been proposed. The first isolation and the X-ray structure analysis were attained for mer-Mo(CO)₃{P(OPh)₃}₃ through the TSMOTf-assisted isomerization of fac-Mo(CO)₃{P(OPh)₃}₃.     

Synthesis and structure of a new selenium-bridged tungsten cluster, [W3Se7(S2P(OEt)2)3]Br

[W₃Se₇(S₂P(OEt)₂)₃]Br was prepared by reacting (Et₄N)₂W₃Se₇Br₆ with KS₂P (OEt)₂ in CH₃CN and its crystal structure determined. In the [W₃(μ₃-Se)(μ₂-Se₂)₃]⁴⁺ core the W---W bond length is 2.755(5)-2.764(6) Å and the Se---Se bond length is 2.32(1)- 2.34(4) Å.     

Synthesis and X-ray structure of (η-C5H5)2W2Ir2(CO)7(CHCO2Et)2, a tetrahedral heterometal cluster with two different environments for ethylcarboxylatocarbene ligands

The tetrahedral heteronuclear cluster complex (η⁵-C₅H₅)₂W₂Ir₂(CO)₁₀ reacts with N₂CHCO₂R (R = Et, Me) at room temperature to form the dicarbene species (η⁵-C₅H₅)₂W₂Ir₂(CO)₇(CHCO₂R)₂. An X-ray diffraction study (R = Et) shows an intact tetrahedral metal framework with two distinct sites for the CHCO₂Et ligands. The first uses its carbon atom to bridge the Ir---Ir bond; the second uses its carbon atom to bridge an Ir---W bond and, additionally, forms a donor bond from a carbonyl oxygen atom to the second tungsten atom.     

Synthesis, structure and reactivity of [(CF3)3GePt(PPh3)2]2Hg

The reaction of Pt(PPh₃)_n (n = 3 or 4) with [(CF₃)₃Ge]₂Hg or (CF₃)₃GeHgPt(PPh₃)₂Ge(CF₃)₃ (I) gives a stable diplatinum complex [(CF₃)₃GePt(PPh₃)₂]₂Hg (II). X-Ray analysis has established that compound II contains a Ge---Pt---Hg---Pt---Ge chain of C₂ symmetry. Both of the Pt atoms have distorted square-planar coordinations. The bond lengths are: Pt---Hg, 2.630(2) and 2.665(2) Å; Ge---Pt, 2.410(4) and 2.407(4) Å.

Compound II reacts with dihydrogen in THF solution under mild conditions to give mercury and the hydride (CF₃)₃GePt(PPh₃)₂H. On interaction of II with R₂Hg organomercurials (R = Cl, Et, GeEt₃, Ge(CF₃)₃, Ge(C₆F₅)₃) an unknown reaction takes place: Pt(PPh₃)₂ moieties migrate from the polymetallic grouping into the substrate with the formation of the corresponding RHgPt(PPh₃)₂R complexes or their demercuration products, R₂Pt(PPh₃);, (R = Cl, Et). The latter react further with complex I formed in the first step of the process to give Hg and (CF₃)₃GePt(PPh₃)₂R. The reaction schemes are discussed.     

Influence of the modification of the ligands on hex-1-ene hydroformylation catalyzed by [HRh{P(OPh)3}4] and [HRh(CO){P(OPh)3}3]. Catalytic activity of the sytem [HRh}P(OPh)3}4]+Cp2Zr(CH2PPh2)2

A study has been carried out of the catalytic activity of the systems formed by [HRh{P(OPh)₃}₄] or [HRh(CO){P(OPh)₃}₃] with the modifying ligands P(OPh)₃, PPh₃, diphos and Cp₂Zr(CH₂PPh₂)₂ in hydroformylation of hex-1-ene (at p = 5 bar). The best results were obtained with the system [HRh{P(OPh)₃}₄]+Cp₂Zr(CH₂PPh₂)₂ (75–85% yeild of aldehydes).     

Induction effects on IR-predissociation spectra of (SF6)2, (SiF4)2 and (SiH4)2

The observed difference in transition strength for (SF₆)₂, (SiF₄)₂ and (SiH₄)₂ IR-predissociation spectra is explained by induction effects (μ₀₁²/R₁₂⁶) which have to be included in the interaction Hamiltonian in addition to the dominant dipole-dipole term (μ₀₁²/R₁₂³).     

Substituted cyclopentadienyl ligands—10. Intramolecular steric interactions in [(η-C5H3(SiMe3)2)Mo(CO)2(L)I]

Reaction of C₅H₄(SiMe₃)₂ with Mo(CO)₆ yielded [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₃]₂, which on addition of iodine gave [(η⁵-C₅H₃(SiMe₃)₂Mo(CO)₃I]. Carbonyl displacement by a range of ligands: [L = P(OMe)₃, P(OPrⁱ)₃,P(O-o-tol)₃, PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(m-tol)₃] gave the new complexes [(η⁵-C₅H₃(SiMe₃)₂ MO(CO)₂(L)I]. For all the trans isomer was the dominant, if not exclusive, isomer formed in the reaction. An NOE spectral analysis of [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₂(L)I] L = PMe₂Ph, P(OMe)₃] revealed that the L group resided on the sterically uncongested side of the cyclopentadienyl ligand and that the ligand did not access the congested side of the molecule. Quantification of this phenomenon [L = P(OMe)₃] was achieved by means of the vertex angle of overlap methodology. This methodology revealed a steric preference with the trans isomer (less congestion of CO than I with an SiMe₃ group) being the more stable isomer for L = P(OMe)₃.     

Reaction of trans-[Pt(H)2(PCy3)2] with C60 reductive elimination of H2 and formation of [Pt(PCy3)2(η-C60)]

Reaction of trans-[Pt(H)₂(PCy₃)₂], 1, with [60]fullerene at room temperature affords [Pt(PCy₃)₂(η²-C₆₀)], 2, in nearly quantitative yield. The most probable reaction pattern is the insertion of a fullerene 6,6 junction onto a Pt-H bond yielding an η¹ alkyl derivative which, after hydrogen extrusion, gives 2. On the other hand, addition of 1 to different electron-deficient olefins, such as dimethyl maleate and fumarate, furnishes mixtures of both η¹ metal—alkyl and η² metal—olefin derivatives. If tetrachloroethylene is used as 2π component, trans-[PtCl(H)(PCy₃)₂] forms exclusively.     

Perfluormethyl-element-liganden : XXXI. Ligandeneigenschaften von Me2PP(CF3)2 und Me2AsP(CF3)2

The coordinating properties of the trifluoromethyl elemental compounds Me₂PP(CF₃)₂ and Me₂AsP(CF₃)₂ have been studied by the synthesis and spectroscopic investigations (IR, NMR, MS) of their complexes cis-M(CO)₄L₂ (A), [(CO)₄ML]₂ (B) and [(CO)₅M]₂L (C) (M = Cr, Mo, W). Complexes of type A with L = Me₂PP(CF₃)₂ are obtained in good yield by reaction with M(CO)₄NBD (NBD = norbornadiene), whereas with L = Me₂AsP(CF₃)₂ the homobinuclear compounds B are formed. The attempt to prepare the cis-M(CO)₄[Me₂AsP(CF₃)₂]₂ complexes by treating M(CO)₄(Me₂AsH)₂ with P₂(CF₃)₄ is successful only for M = W. Binuclear compounds of type B or C, in general, can be prepared by stepwise reaction of the ligands with either M(CO)₄NBD or M(CO)₅THF.     

The evaluation of singlet-triplet separations for [W2(μ-H)(μ-Cl)Cl4(μ-dppm)2] and [W2(μ-H)2 (μ-O2CC6H5)2(P(C6H5)3)2] based on P NMR and crystallographic data

The singlet-triplet separations for the edge-sharing bioctahedral (ESBO) complex W₂(μ-H)(μ-Cl)(Cl₄(μ-dppm)₂ · (THF)₃ (II) has been studied by ³¹P NMR spectroscopy. The structural characterization of [W₂(μ-H)₂(μ-O₂CC₆H₅)₂Cl₂(P(C₆H₅)₃)₂] (I) by single-crystal X-ray crystallography has allowed the comparison of the energy of the HOMOLUMO separation determined using the Fenske-Hall method for a series of ESBO complexes with two hydride bridging atoms, two chloride bridging atoms and the mixed case with a chloride and hydride bridging atom. The complex representing the mixed case, [W₂(μ-H)(μ-Cl)Cl₄(μ-dppm)₂ · (THF)₃] (II), has been synthesized and the value of −2J determined from variable-temperature ³¹P NMR spectroscopy.