Rhodium(I) carbonyl complexes of ether‐phosphine ligands and their reactivity

The reactions of dimeric complex [Rh(CO)₂Cl]₂ with hemilabile ether‐phosphine ligands Ph₂P(CH₂) _nOR [n = 1, R = CH₃ (a); n = 2, R = C₂H₅ (b)] yield cis‐[Rh(CO)₂Cl(P ～ O)] (1) [P ～ O = η ¹‐(P) coordinated]. Halide abstraction reactions of 1 with AgClO₄ produce cis‐[Rh(CO)₂(P ∩ O)]ClO₄ (2) [P ∩ O = η ²‐(P,O)chelated]. Oxidative addition reactions of 1 with CH₃I and I₂ give rhodium(III) complexes [Rh(CO)(COCH₃)ClI(P ∩ O)] (3) and [Rh(CO)ClI₂(P ∩ O)] (4) respectively. The complexes have been characterized by elemental analyses, IR, ¹H, ¹³C and ³¹P NMR spectroscopy. The catalytic activity of 1 for carbonylation of methanol is higher than that of the well‐known [Rh(CO)₂I₂]^? species. Copyright © 2002 John Wiley & Sons, Ltd.     

Rhodium(I) carbonyl complexes of chalcogen functionalized tripodal phosphines, [CH3C(CH2P(X)Ph2)3] {X = O, S, Se} and their reactivity

The reaction of dimeric rhodium precursor [Rh(CO)₂Cl]₂ with two molar equivalent of 1,1,1-tris(diphenylphosphinomethyl)ethane trichalcogenide ligands, [CH₃C(CH₂P(X)Ph₂)₃](L), where X = O(a), S(b) and Se(c) affords the complexes of the type [Rh(CO)₂Cl(L)] (1a–1c). The complexes 1a–1c have been characterized by elemental analyses, mass spectrometry, IR and NMR (¹H, ³¹P and ¹³C) spectroscopy and the ligands a–c are structurally determined by single crystal X-ray diffraction. 1a–1c undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I and C₆H₅CH₂Cl to give Rh(III) complexes of the types [Rh(CO)(COR)ClXL] {R = –CH₃ (2a–2c), –C₂H₅ (3a–3c); X = I and R = –CH₂C₆H₅ (4a–4c); X = Cl}. Kinetic data for the reaction of a–c with CH₃I indicate a first-order reaction. The catalytic activity of 1a–1c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 1564–1723) is obtained compared to that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature 130 ± 2 °C, pressure 30 ± 2 bar and time 1 h.     

Carbonylrhodium complexes of pyridine ligands and their catalytic activity towards carbonylation of methanol

The cis‐[Rh(CO)₂ClL] (1) complexes, where L = 2‐methylpyridine (a), 3‐methylpyridine (b), 4‐methylpyridine (c), 2‐phenylpyridine (d), 3‐phenylpyridine (e), 4‐phenylpyridine (f), undergo oxidative addition reactions with various electrophiles, like CH₃I, C₂H₅I, C₆H₅CH₂Cl or I₂, to yield complexes of the types [Rh(CO)(COR)ClXL] (2) (where R = CH₃ (i), C₂H₅ (ii), X = I; R = C₆H₅CH₂ (iii), X = Cl) or [Rh(CO)ClI₂L] (3) and [Rh(CO)₂ClI₂L] (4). The pseudo‐first‐order rate constants of CH₃I addition with complexes 1 containing pyridine (g) and 2‐substituted pyridine (a and d) ligands were found to follow the order pyridine >2‐methylpyridine >2‐phenylpyridine. The catalytic activity of complexes 1 containing different pyridine ligands (a–g) on carbonylation of methanol was studied and, in general, a higher turnover number was obtained compared with that of the well‐known species [Rh(CO)₂I₂]^?. Copyright © 2002 John Wiley & Sons, Ltd.     

Chemistry of transition‐metal complexes containing functionalized phosphines: synthesis and structural analysis of rhodium(I) complexes containing allyl and cyanoalkylphosphines

A series of related acetylacetonate–carbonyl–rhodium compounds substituted by functionalized phosphines has been prepared in good to excellent yields by the reaction of [Rh(acac)(CO)₂] (acac is acetylacetonate) with the corresponding allyl‐, cyanomethyl‐ or cyanoethyl‐substituted phosphines. All compounds were fully characterized by ³¹P, ¹H, ¹³C NMR and IR spectroscopy. The X‐ray structures of (acetylacetonato‐κ²O,O′)(tert‐butylphosphanedicarbonitrile‐κP)carbonylrhodium(I), [Rh(C₅H₇O₂)(CO)(C₈H₁₃N₂)] or [Rh(acac)(CO)(^tBuP(CH₂CN)₂}] ( 2b ), (acetylacetonato‐κ²O,O′)carbonyl[3‐(diphenylphosphanyl)propanenitrile‐κP]rhodium(I), [Rh(C₅H₇O₂)(C₁₅H₁₄N)(CO)] or [Rh(acac)(CO){Ph₂P(CH₂CH₂CN)}] ( 2h ), and (acetylacetonato‐κ²O,O′)carbonyl[3‐(di‐tert‐butylphosphanyl)propanenitrile‐κP]rhodium(I), [Rh(C₅H₇O₂)(C₁₁H₂₂N)(CO)] or [Rh(acac)(CO){^tBu₂P(CH₂CH₂CN)}] ( 2i ), showed a square‐planar geometry around the Rh atom with a significant trans influence over the acetylacetonate moiety, evidenced by long Rh—O bond lengths as expected for poor π‐acceptor phosphines. The Rh—P distances displayed an inverse linear dependence with the coupling constants J_P‐Rh and the IR ν(C[triple‐bond]O) bands, which accounts for the Rh—P electronic bonding feature (poor π‐acceptors) of these complexes. A combined study from density functional theory (DFT) calculations and an evaluation of the intramolecular H…Rh contacts from X‐ray diffraction data allowed a comparison of the conformational preferences of these complexes in the solid state versus the isolated compounds in the gas phase. For 2b , 2h and 2i , an energy‐framework study evidenced that the crystal structures are mainly governed by dispersive energy. In fact, strong pairwise molecular dispersive interactions are responsible for the columnar arrangement observed in these complexes. A Hirshfeld surface analysis employing three‐dimensional molecular surface contours and two‐dimensional fingerprint plots indicated that the structures are stabilized by H…H, C…H, H…O, H…N and H…Rh intermolecular interactions.     

Dicarbonylrhodium(I) complexes of aminophenols and their catalytic carbonylation reaction

The complexes [Rh(CO)₂ClL]( 1 ), where L = 2‐aminophenol ( a ), 3‐aminophenol ( b ) and 4‐aminophenol ( c ), have been synthesized and characterized. The ligands are coordinated to the metal centre through an N‐donor site. The complexes 1 undergo oxidative addition ( OA ) reactions with various alkyl halides ( RX ) like CH₃I, C₂H₅I and C₆H₅CH₂Cl to produce Rh(III) complexes of the type [Rh(CO)(COR)XClL], where R = ? CH₃( 2 ), ? C₂H₅( 3 ), X = I; R = C₆H₅CH₂? and X = Cl ( 4 ). The OA reaction with CH₃I follows a two‐stage kinetics and shows the order of reactivity as 1b > 1c > 1a . The minimum energy structure and Fukui function values of the complexes 1a–1c were calculated theoretically using a DND basis set with the help of Dmol³ program to substantiate the observed local reactivity trend. The catalytic activity of the complexes 1 in carbonylation of methanol, in general, is higher (TON 1189–1456) than the species [Rh(CO)₂I₂]^? (TON 1159). Copyright © 2007 John Wiley & Sons, Ltd.     

Chemie polyfunktioneller Moleküle. 82. Neue Rhodium(I)-Chelatkomplexe mit N,N-Bis(diphenylphosphino)alkyl- und -arylaminen

Chemistry of Polyfunctional Molecules. 82. New Rhodium(1) Chelate Complexes with N,N-Bis(diphenylphosphino) alkyl- and -arylamines . [Rh(μ-Cl)(CO)₂]₂ ( 1 ) reacts with (Ph₂P)₂NR (2, a: R = C₆H₅, b: R = p-C₆H₄CH₃) in a molar ratio of 1:2 to give the square plane, ionic complexes [Rh{(PH₂P)₂NR}₂] [cis-Rh(CO)₂Cl₂] ( 3a, b ). By the reactions of [Rh(μ-Cl)(C₈H₁₂)]₂(C₈H₁₂ = 1.5-Cyclooctadiene) (4) with (Ph₂P)₂NR ( 2a–d ) (c: R = CH₃, d: R = C₂H₅) in the molar ratios of 1:4 the square plane 1:1 electrolytes [Rh{(Ph₂P)₂NR}₂]Cl ( 5a–d ) are obtained. Upon treatment of 5a–d in dichloromethane with CO the complexes [Rh(CO){(Ph₂P)₂NR}₂]Cl ( 6a–d ) are formed. They are only stable in solution and in CO atmosphere and were identified by infrared spectroscopy. The new complexes have been characterized, as far as possible, by conductometry, IR; FIR, Raman, ³¹P-NMR, and ¹H-NMR spectra.     

Polymerization of propadiene. III. Catalyst systems based on various rhodium (I) complexes

The polymerization of propadiene to 1,2-polyallene by various Rh(I) based catalysts is described and discussed. Also the interrelations between these Rh(I) complexes are discussed and an overall reaction scheme is given. A mechanism is put forward in which the formation of a common intermediate from propadiene and different Rh(I) complexes is the rate determining step. It is found that the activity decreases in the order: cis-Rh(CO)₂P(C₆H₅)₃Cl > [Rh(CO)₂Cl]₂ > Rh(CO)₃Cl. The complexes Rh[P(C₆H₅)₃]₂(CO)Cl and Rh[P(C₆H₅)₃]₃Cl proved to be inactive in the polymerization of propadiene.     

Bis(cyclopentadienyl)methan-verbrückte Zweikernkomplexe,V. Heteronukleare Co/Rh-, Co/Ir-, Rh/Ir- und Ti/Ir-Komplexe mit dem Bis(cyclopentadienyl)methan-Dianion als Brückenliganden

Bis(cyclopentadienyl)methane-bridged Dinuclear Complexes, V^[1]. – Heteronuclear Co/Rh-, Co/Ir-, Rh/Ir-, and Ti/Ir Complexes with the Bis(cyclopentadienyl)methane Dianion as Bridging Ligand^* The lithium and sodium salts of the [C₅H₅CH₂C₅H₄]^- anion, 1 and 2 , react with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [Ir(CO)₃Cl]n to give predominantly the mononuclear complexes [(C₅H₅-CH₂C₅H₄)M(CO)₂] ( 3, 5, 7 ) together with small amounts of the dinuclear compounds [CH₂(C₅H₄)₂][M(CO)₂]₂ ( 4, 6, 8 ). The ¹H- and ¹³C-NMR spectra of 3, 5 , and 7 prove that the CH₂C₅H₅ substituent is linked to the π-bonded ring in two isomeric forms. Metalation of 5 and 7 with nBuLi affords the lithiated derivatives 9 and 10 from which on reaction with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [C₅H₅TiCl₃] the heteronuclear complexes [CH₂(C₅H₄)₂][M(CO)₂][M′(CO)₂] ( 11–13 ) and [CH₂(C₅H₄)₂]-[Ir(CO)₂][C₅H₅TiCl₂] ( 17 ) are obtained. Photolysis of 11 and 12 leads almost quantitatively to the formation of the CO-bridged compounds [CH₂(C₅H₄)₂][M(CO)(μ-CO)M′(CO)] ( 14, 15 ). According to an X-ray crystal structure analysis the Co/Rh complex 14 is isostructural to [CH₂(C₅H₄)₂][Rh₂(CO)₂(μ-CO)] ( 16 ).     

Monophosphine‐substituted diiron azadithiolate complexes: New syntheses,characterization and electrochemical properties

Investigating the synthesis and properties of diiron azadithiolate complexes is one of the key topics for mimicking the active site of [FeFe]‐hydrogenases, which might be very useful for the design of new efficient catalysts for hydrogen production and the development of a future hydrogen economy. A series of new phosphine‐substituted diiron azadithiolate complexes as models for the active site of [FeFe]‐hydrogenases are described. A novel and efficient way was firstly established for the preparation of phosphine‐substituted diiron azadithiolate complexes. The reaction of Fe₂(μ‐SH)₂(CO)₆ and phosphine ligands L affords the intermediate Fe₂(μ‐SH)₂(CO)₅L ( A ). The intermediate reacts in situ with a premixed solution of paraformaldehyde and ammonium carbonate to produce the target phosphine‐substituted diiron azadithiolate complexes Fe₂[(μ‐SCH₂)₂NH](CO)₅L ( 1a – 1f ) (L = P(C₆H₄–4‐CH₃)₃, P(C₆H₄–3‐CH₃)₃, P(C₆H₄–4‐F)₃, P(C₆H₄–3‐F)₃, P(2‐C₄H₃O)₃, PPh₂(OCH₂CH₃)). Furthermore, reactions of the intermediate A with I‐4‐C₆H₄N(CH₂Cl)₂ in the presence of Et₃N give the phosphine‐substituted diiron azadithiolate complexes Fe₂[(μ‐SCH₂)₂NC₆H₄–4‐I](CO)₅L ( 2a – 2e ) (L = P(C₆H₄–4‐CH₃)₃, P(C₆H₄–3‐CH₃)₃, P(C₆H₄–4‐F)₃, P(C₆H₄–3‐F)₃, P(2‐C₄H₃O)₃). All the complexes were fully characterized using elemental analysis, IR and NMR spectroscopies and, particularly for 1a , 1c – 1e , 2a and 2c , single‐crystal X‐ray diffraction analysis. In addition, complexes 1a – 1f and 2a – 2e were found to be catalysts for H₂ production under electrochemical conditions. Density functional theory calculations were performed for the reactions of Fe₂(μ‐SH)₂(CO)₆ + P(C₆H₄–4‐CH₃)₃.     

Platinum(II) and Palladium(II) Bis(chelate) Complexes Containing both Tri(1‐cyclohepta‐2, 4, 6‐trienyl)phosphane,P(C7H7)3, and Dichalcogenolato Ligands

Tri(1‐cyclohepta‐2, 4, 6‐trienyl)phosphane, P(C₇H₇)₃ ([P] when coordinated to a metal atom), was used to stabilize complexes of platinum(II) and palladium(II) with chelating dichalcogenolato ligands as [P]M(E∩E) [E = S, ∩ = CH₂CH₂, M = Pt ( 3a ); E = S, ∩ = 1, 2‐C₆H₄, M = Pt ( 5a ), Pd ( 6a ); E = S, ∩ = C(O)C(O), M = Pt ( 7a ), Pd ( 8a ); E = S, Se, ∩ = 1, 2‐C₂(B₁₀H₁₀), M = Pt ( 9a, 9b ), Pd ( 10a, 10b ); E = S, ∩ = Fe₂(CO)₆, M = Pt ( 11a ), Pd ( 12a )]. Starting materials in all reactions were [P]MCl₂ with M = Pt ( 1 ) and Pd ( 2 ). Attempts at the synthesis of [P]M(ER)₂ with non‐chelating chalcogenolato ligands were not successful. All new complexes were characterized by multinuclear magnetic resonance spectroscopy in solution (¹H, ¹³C, ³¹P, ⁷⁷Se and ¹⁹⁵Pt NMR), and the molecular structures of 5a and 12a were determined by X‐ray analysis. Both in the solid state and in solution the ligand [P] is linked to the metal atom by the P‐M bond and by η²‐C=C coordination of the central C=C bond of one of the C₇H₇ rings. In solution, intramolecular exchange between coordinated and non‐coordinated C₇H₇ rings is observed, the exchange process being markedly faster in the case of M = Pd than for M = Pt.     

Synthesis reactivity and electrochemical properties of substituted cyclopentadienyl cobalt (III) complexes

Cyclopentadienyl cobalt complexes (η⁵‐C₅H₄R) CoLI₂ [L = CO,R=‐COOCH₂CH=CH₂ (3); L=PPh₃, R=‐COOCH₂‐CH=CH₂ (6); L=P(p‐C₆H₄O₃)₃, R = ‐COOC(CH₃) = CH₂ (7), ‐COOCH₂C₆H₅ (8), ‐COOCH₂CH = CH₂ (9)] were prepared and characterized by elemental analyses, ¹H NMR, ER and UV‐vis spectra. The reaction of complexes (η⁵‐C₅H₄R)CoLI₂ [L= CO, R= ‐COOC(CH₃) = CH₂ (1), ‐COOCH₂C₆H₅(2); L=PPh₃, R=‐COOC (CH₃) = CH₂ (4), ‐COOCH₂C₆H₅ (5)] with Na‐Hg resulted in the formation of their corresponding substituted cobaltocene (η⁵‐C₅H₄R)₂ Co[R=‐COOC(CH₃) = CH₂ (10), ‐COOCH₂C₆H₅ (11)]. The electrochemical properties of these complexes 1–11 were studied by cyclic voltammetry. It was found that as the ligand (L) of the cobalt (III) complexes changing from CO to PPh₃ and P(p‐tolyl)₃, their oxidation potentials increased gradually. The cyclic voltammetry of α,α′‐substituted cobaltocene showed reversible oxidation of one electron process.     

Ruthenium(II) carbonyl complexes of P,P and P,O donor diphosphine ligands,Ph2P(CH2)nPPh2 and Ph2P(CH2)nP(O)Ph2, n = 2, 3 and their activities in catalytic transfer hydrogenation reactions

The polymeric precursor [RuCl₂(CO)₂]_n reacts with the ligands, P∩P (a, b) and P∩O (c, d), in 1:1 M ratio to generate six-coordinate complexes [RuCl₂(CO)₂(?²-P∩P)] (1a, 1b) and [RuCl₂(CO)₂(?²-P∩O)] (1c, 1d), where P∩P: Ph₂P(CH₂)_nPPh₂, n = 2(a), 3(b); P∩O: Ph₂P(CH₂)_nP(O)Ph₂, n = 2(c), 3(d). The complexes are characterized by elemental analyses, mass spectrometry, thermal studies, IR, and NMR spectroscopy. 1a–1d are active in catalyzed transfer hydrogenation of acetophenone and its derivatives to corresponding alcohols with turnover frequency (TOF) of 75–290 h^?1. The complexes exhibit higher yield of hydrogenation products than catalyzed by RuCl₃ itself. Among 1a–1d, the Ru(II) complexes of bidentate phosphine (1a, 1b) show higher efficiency than their monoxide analogs (1c, 1d). However, the recycling experiments with the catalysts for hydrogenation of 4-nitroacetophenone exhibit a different trend in which the catalytic activities of 1a, 1b, and 1d decrease considerably, while 1c shows similar activity during the second run.     

Dirhodium(II) dicarboxylato complexes containing carbonyl and C-bonded methoxycarbonyl ligands

Oxidation of rhodium(I) carbonyl chloride, [Rh(CO)₂Cl]₂, with copper(II) acetate or isobutyrate in methanol solutions yields binuclear double carboxylato bridged rhodium(II) complexes with RhRh bonds, [Rh(μ-OOCRκO)(COOMeκC)(CO)(MeOH)]₂, where R=CH₃ or i-C₃H₇. According to X-ray data, surrounding of each rhodium atom in these complexes is close to octahedral and consists of another rhodium atom, two oxygens of carboxylato ligands, terminal carbonyl group, C-bonded methoxycarbonyl ligand, and axial CH₃OH. Methoxycarbonyl ligand is shown to originate from CO group of the parent [Rh(CO)₂Cl]₂ and OCH₃ group of solvent. N- and P-donor ligands L (p-CH₃C₆H₄NH₂, P(OPh)₃, PPh₃, PCy₃) readily replace the axial MeOH yielding [Rh(μ-OOCRκO)(COOMeκC)(CO)(L)]₂. The X-ray data for the complex with R=i-C₃H₇, L=PPh₃ showed the same molecular outline as with L=MeOH. Electronic effects of axial ligands L on the spectral parameters of terminal carbonyl group are essentially the same as in the known series of rhodium(I) complexes (an increase of δ¹³C and a decrease of ν(CO) with strengthening of σ-donor and weakening of π-acceptor ability of L).     

Synthesis,structures, and electrocatalytic properties of phosphine-monodentate, −chelate,and -bridge diiron 2,2-dimethylpropanedithiolate complexes related to [FeFe]-hydrogenases

To further extend diiron subsite models of [FeFe]-hydrogenases, the various substitutions of all-carbonyl diiron complex Fe₂(μ-Me₂pdt)(CO)₆ ( A , Me₂pdt = (SCH₂)₂CMe₂) with monophosphines or small bite-angle diphosphines are studied as follows. Firstly, the monodentate complexes Fe₂(μ-Me₂pdt)(CO)₅{κ¹-P(C₆H₄R-p)₃} [R = Me ( 1a ) and Cl ( 1b )] and Fe₂(μ-Me₂pdt)(CO)₅{κ¹-Ph₂PX'} [X' = NHPh ( 2a ) and CH₂PPh₂ ( 2b )] are readily afforded through the Me₃NO-assisted reactions of A with monophosphines P(C₆H₄R-p)₃ (R = Me, Cl) and diphosphines (Ph₂P)₂X (X = NPh, CH₂ (dppm)) in MeCN at room temperature, respectively. Secondly, the chelate complexes Fe₂(μ-Me₂pdt)(CO)₄(κ²-(Ph₂P)₂X) [X = NPh ( 3a ) and NBuⁿ ( 3b )] can be efficiently prepared by the UV-irradiated reactions of A with small bite-angle diphosphines (Ph₂P)₂X (X = NPh, NBuⁿ) in toluene. Thirdly, the bridge complexes Fe₂(μ-Me₂pdt)(CO)₄(μ-(Ph₂P)₂X) [X = NPh ( 4a ) and CH₂ ( 4b )] are well obtained from the refluxing solutions of A and diphosphines (Ph₂P)₂X (X = NPh, CH₂) in xylene. Rarely, the diphosphine-bridge complex 4b may be produced in low yield via the UV-irradiated solutions of A and the dppm ligand in toluene emitting at 365 nm. Eight new complexes obtained above have been well characterized by using element analysis, FT-IR, NMR (¹H, ³¹P) spectroscopies, and particularly for 1a , 1b , 2a , 3b , 4a , 4b by X-ray crystallography. Meanwhile, the electrochemical and electrocatalytic properties of three representative complexes 2a , 3a , and 4a with pendant N-phenyl groups are investigated and compared by using cyclic voltammetry (CV) in the absence and presence of trifluoroacetic acid (TFA) as a proton source, indicating that they are all found to be active for electrocatalytic proton reduction to hydrogen (H₂).     

Metallorganische Verbindungen mit N-substituierten 3-Hydroxy-2-methyl-4-pyridon-Liganden: quadratisch-planare Rhodium(I)-, Iridium(I)- und Palladium(II)-Komplexe

Organometallic Compounds with N -substituted 3-Hydroxy-2-methyl-4-pyridone Ligands: square planar Rhodium(I), Iridium(I), and Palladium(II) Complexes Reactions of [(OC)₂MCl]₂ (M = Rh, Ir) or [(cod)RhCl]₂ with the anions of N-Aryl or N-Alkyl substituted 3-hydroxy-2-methyl-4-pyridones (O–O′) yield complexes of the general formula [L₂M(O–O′)]. Compounds of this type are also available from reactions of [(OC)₂Rh(acac)] with the corresponding neutral ligands. Substitution of one carbonyl-ligand of the N-phenyl complex [(OC)₂Rh(C₁₂H₁₀NO₂)] ( 2 ) with cyclooctene affords [(OC)(C₈H₁₄)Rh(C₁₂H₁₀NO₂)] ( 8 ). The palladium complexes [(R₃P)Pd(O–O′)Cl] (R = Et, Bu), [(C₆H₄CH₂NMe₂) · Pd(O–O′)] and [(Et₃P)₂Pd(O–O′)]BF₄ ( 9 – 12 ) were synthesized from [(R₃P)PdCl₂]₂, [(C₆H₄CH₂NMe₂)PdCl]₂ or [(Et₃P)PdCl₂]. The structures of the N-methyl compounds [(OC)₂Rh(C₇H₈NO₂)] ( 1 ) and [(Ph₃P)Pd(C₇H₈NO₂)Cl] ( 9 ) were determined by single crystal X-ray diffraction.     

Effect of chelating agent on the oxidation rate of PCP in the magnetite/H2O2 system at neutral pH

The complex [Rh(CO)₂Cl]₂ reacts with two molar equivalent of pyridine carboxylic acids ligands Py-2-COOH(a), Py-3-COOH(b) and Py-4-COOH(c) to yield rhodium(I) dicarbonyl chelate complex [Rh(CO)₂(L^/)](1a) {L^/ = η²-(N,O) coordinated Py-2-COO⁻(a^/)} and non-chelate complexes [Rh(CO)₂ClL^//](1b,c) {L^// = η¹-(N) coordinated Py-3-COOH(b), Py-4-COOH(c)}. The complexes 1 undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to give penta coordinated Rh(III) complexes of the types [Rh(CO)(CORⁿ)XL^/], {n = 1,2,3; R¹ = CH₃(2a); R² = C₂H₅(3a); X = I and R³ = CH₂C₆H₅ (4a); X = Cl}, [Rh(CO)I₂L^/](5a), [Rh(CO)(CORⁿ)ClXL^//] {R¹ = CH₃(6b,c); R² = C₂H₅(7b,c); X = I and R³ = CH₂C₆H₅ (8b,c); X = Cl} and [Rh(CO)ClI₂L^//](9b,c). The complexes have been characterized by elemental analysis, IR and ¹H NMR spectroscopy. Kinetic data for the reaction of 1a–b with CH₃I indicate a first order reaction. The catalytic activity of 1a–c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 810–1094) is obtained compared with that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 653) at mild reaction conditions (temperature 130 ± 5 °C, pressure 35 ± 5 bar).     

Photocatalytic properties of new cyclopentadienyl and indenyl rhodium(I) carbonyl complexes with water-soluble 1,3,5-triaza-7-phosphaadamantane (PTA) and tris(2-cyanoethyl)phosphine

Reactions of [(η⁵-R)Rh(CO)₂] (R = cp, ind) with water-soluble phosphines (L = 1,3,5-triaza-7-phosphaadamantane and tris(2-cyanoethyl)phosphine) give the new rhodium(I) complexes of the types [Rh(η⁵-cp)(CO)(PTA)] (1), [Rh(η⁵-cp)(CO)(P(CH₂CH₂CN)₃)] (2), [Rh(η⁵-ind)(CO)(PTA)] (3) and [Rh(η⁵-ind)(CO)(P(CH₂CH₂CN)₃)] (4) in isolated yields of 52-75%. All these compounds have been fully characterized by IR, ¹H, ³¹P{¹H} and ¹³C{¹H} NMR, FAB-MS spectroscopies and elemental analyses. Reactivity for the substitution of phosphine is greater for [(η⁵-ind)Rh(CO)(L)] comparing to [(η⁵-cp)Rh(CO)(L)] because of a flexibility of the indenyl ligand to undergo facile η⁵-η³ coordinative isomerizations. The obtained complexes are active catalyst precursors for the dehydrogenation of propan-2-ol, octane and cyclooctane under photoassisted conditions without any organic hydrogen transfer acceptors, giving TOFs of 26-56 using 3 as precatalyst.     

COMPLEXES OF HEXATERTIARY PHOSPHINES AND ARSINES AND THEIR REACTION WITH SMALL MOLECULES

Abstract

The synthesis of a new sexadentate ligand, P,P,P′,P′-tetrakis(2-diphenylarsinoethyl)α, α′-diphospha-p-xylene (TDADX) and the preparation of its iridium(I), rhodium(I) and ruthenium (II) complexes are described. When M=Ir and Rh, MCl(CO)(PPh₃)₂ reacts in benzene solution with the ligand TDADX to yield the complexes, [Ir(TDADX)] Cl and Rh₂ Cl₂ (TDADX). RuCl(CO)(PPh₃)₃ Cl reacts with this ligand to yield [RuCl(TDADX)]Cl. Complexes of P,P,P′,P′-tetrakis(2-diphenylphosphinoethyl-α,α-diphospha-p-xylene(TDDX) were also studied for comparison. Molecular hydrogen reacts with the complexes Ir₂ Cl₂ (TDDX), [Ir(TDADX)] Cl and [RuCl(TDADX)] Cl to form the corresponding hydrido complexes. Reaction of molecular oxygen with Rh₂ Cl₂ (TDADX) resulted in the formation of the dioxygen complex. Ir(I), Rh(I) and Ru(II) complexes of TDDX and TDADX react with carbonmonoxide to give mixed ligand carbonyl complexes. The complexes Ir₂ Cl₂ (TDDX), [Ir(TDADX)] Cl, and [RuCl(TDADX)] Cl react with nitric oxide to yield nitrosyl complexes. Infrared spectral data are provided for adducts formed with hydrogen, oxygen, carbon monoxide and nitric oxide.     

Polymerization of propadiene. IV. Kinetics and mechanism of polymerization under the influence of rhodium(I) complexes

The kinetics and mechanisms of propadiene polymerization under the influence of [Rh(CO)₂Cl]₂, Rh(CO)₂P(C₆H₅)₃Cl, Rh(CO)₃Cl are reported. The reaction rates are first-order in Rh(CO)₂P(C₆H₅)₃Cl and Rh(CO)₃Cl and half-order in [Rh(CO)₂Cl]₂. They are second-order in the substrate for Rh(CO)₃Cl and [Rh(CO)₂Cl]₂ and first-order for Rh(CO)₂P(C₆H₅)₃Cl. The data are interpreted in terms of a common intermediate mechanism. The formation of this common intermediate is the rate-determining step. A solvent effect is also discussed.     

Effects of metal ions and ligands on transesterification: synthesis,structures, and catalytic activities of a series of cation–anionic complexes with dipyridylamine ligands

A series of cation–anion complexes derived by 2,2′-dipyridylamine (Hdpa) and carboxylate ligands with formulas [Ni(Hdpa)₂(CH₃COO)]Cl(CH₃OH) (1), [Co(Hdpa)₂(CH₃COO)]Cl(CH₃OH) (2), [Ni(Hdpa)₂(CH₃CH₂CH₂COO)]Cl (3), [Co(Hdpa)₂(CH₃CH₂CH₂COO)]Cl (4), [Ni(Hdpa)₂(C₆H₅COO)]Cl (5), and [Co(Hdpa)₂(C₆H₅COO)]Cl (6), were synthesized and characterized by IR, elemental analysis, MS(ESI), TG analysis, UV-Vis, and fluorescence spectra. X-ray single crystal structural analysis showed that the coordination geometries of metal ions in these complexes are similar and they are cation–anion species. The hydrogen-bonding structures are 1-D chains through the N–H···Cl bonds. There are weak stacking interactions between pyridine rings in 1–4, while there are no stacking interactions in 5 and 6. We have investigated the transesterification of phenyl acetate with methanol catalyzed by 1–6 under mild conditions; 1–4 are homogeneous catalysts while 5 and 6 are heterogeneous catalysts due to their poor solubility in methanol. Cobalt complexes exhibit higher catalytic activities than corresponding nickel complexes. Complex 4 is the best catalyst of these six complexes.