Improvement of accuracy of interferometric measurement of wedge angle of plates

A method is proposed for improving the accuracy of measuring the wedge angle of transparent plates using a lateral-shear holographic interferometer. Consecutive processing of a pair of interferograms with doubled number of interference fringes leads to reduction of the observational error by a factor of two compared to traditional interferometric methods. Data on the experimental validation of the method are presented.     

Simulation of the superlinearity of dose characteristics of thermoluminescence of anion-defective aluminum oxide

The specific features revealed in the superlinearity of dose dependences of thermoluminescence of anion-defective aluminum oxide single crystals have been considered theoretically in terms of the model of an interactive trap system. The model explains the decrease in the degree of superlinearity at a low heating rate, as well as with an increase in the dose increment, the occupancy of deep traps, and the sensitivity of the crystals to radiation due to the increase in the concentration of luminescence centers. The obtained results indicate a widening of the possibilities of the model for interpreting experimental data in the investigation of the dose characteristics of thermoluminescence of the studied crystals.     

Measurement of degree of polarization of fluorescence of pure anthracene crystalline film

The polarization ratio (I _b/I_a) of fluorescence of a monocrystalline film of pure anthracene is measured correcting for all probable errors. Comparison with decay-time data brings out that deviation from the value obtained from absorption measurements is due to a loss of intensity in the a-polarized fluorescence as compared to what is expected from absorption data. This is interpreted as an evidence that anthracene crystal fluorescence is emitted from regions of local lattice imperfections. It is confirmed that the first electronic transition takes place along the short axis of the anthracene molecule.     

Formation of One-Dimensional Distributions of Values of Correlators of Network Traffic Aggregates

Russian Physics Journal - A mathematical model of the flow of aggregated load characteristics of network traffic data packets in the form of a set of analytical signals is proposed. The real parts...     

Role of interactions of triplets of atoms in the formation of elastic properties of cubic crystals

It is widely known that the interaction of triplets of particles (which are not reducible to the sum of pair interactions) play an important role in formation the nonlinear and anisotropic properties of crystals. The aim of this work is to establish a general form of the dependence of these properties on interactions of triplets of atoms that is dependent only on the structure of the crystals. To separate the interactions of triplets of atoms from those of quadruples, we assume that the energy of triplets of interacting atoms depends only on the characteristics of a triangle whose vertices are the centers of gravity of interacting atoms. In this model, the internal energy must therefore be invariant upon rearrangement of the numbers of interacting atoms and any rotation of the triangle in isotropic space, P(3) × O(3). To specify the form of energy dependence on characteristics of selected triangles, we constructed an integral rational basis of invariants in dependence on the components of the vectors connecting the vertices of each triangle. Using the example of a simple dependence of the energy on basic invariants, we show how to move from the assumed energy dependence on invariants to the dependence of energy on lattice sums.     

Rectangularity of hysteresis loop of ferrites as a function of volume of reverse domains in state of remanence

A study is made of the dependence of the coefficient of rectangularity of the hysteresis loop of ferrites of the Li-Mn-Mg and Mg-Mn-Zn system on the volume concentration of residual reverse domains. The latter is calculated from the results of measurements of the relative remanence on the basis of a model developed. It is shown that a high degree of loop rectangularity can be attained not only in the absence of reverse domains but also in the presence of a considerable volume concentration of such domains.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 109–114, June, 1978.     

Analysis of spectral characteristics of scattering of evanescent waves

The spectral scattering characteristics of nanoscale particles exhibited in the field of evanescent waves are analyzed using the method of discrete sources. The effect of various parameters on the behavior of the scattering characteristics is studied. The material of the particles is shown to have the most substantial effect on the scattering cross section.     

Generation of superpositions of coherent states of the motion of a trapped ion

We propose a method for preparing superpositions of coherent states of the motion of an ion in an anisotropic two-dimensional trap, in which the ion is tightly bound in the y direction. In the scheme the ion is excited by two resonant laser beams with equal amplitude, propagating along the x and y directions, respectively. In the Dicke-Lamb limit, an initial coherent state of the ion motion can be converted into a superposition of several coherent states on a circle through the laser-ion interactions and state-selective measurements on the ion. Received: 30 May 1997 / Revised: 29 July 1997 / Accepted: 22 October 1997     

Distribution of zeros of the partition function of the lattice gases of fisher and of temperley

The distributions of zeros of the partition function of lattice gas models of Fisher (at some temperature) and of Temperley are obtained. The former is a closed loop crossing the real axis and the latter is a part of the negative real axis.     

Effect on zero drift of accuracy of reciprocal tuning of elements of fiber-optic interferometer

The effect of the accuracy of reciprocal tuning of the elements of a fiber-optic interferometer (FOI) — laser, polarizer, and eigenaxes of single-mode-fiber (SMF) birefringence — is examined. It is shown that zero drift in the FOI consists of two parts — a constant part and a temperature-related variable part. Both of these parts are functions of the polarization state of the radiation at the entrance to the polarizer, the extinction coefficient of the polarized, and the orientation of the SMF eigenaxes with respect to the polarizer. The variable part of the zero drift is also a function of the birefringence and h-parameter of the SMF and the width of the radiation-source spectrum. Numerical estimates of FOI zero drift are made.Institute of Applied Physics, Academy of Sciences of the USSR. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 34, No. 7, pp. 817–824, July, 1991.     

X-ray interferometric method of determination of parameters of permolecular structure of polymers

A new method for determining the density of polymer materials based on determination of the path-length differences in moiré patterns is proposed. The method is characterized by simplicity and accuracy of results. The densities of polychloropren and polystirol have been determined with high accuracy. Knowledge of the dependence of the polymer density on the stretching degree enables one to reveal the dynamics of changes in the permolecular structure at deformation of polymers.     

Application of new methods of interpretation of meteor observations at the Institute of Astrophysics of Tajikistan

New methods of interpretation of meteor observations were developed and published in [1?C9]. The interpretation of ground-based observations of meteors and bolides available today in the scientific literature all over the world suffers from serious contradictions. Observers use the so-called photometric approach for determination of extra-atmospheric masses of meteoric bodies. This approach is based on the formula proposed in 1933 [10] and very simple ideas of how to describe the interaction between the atmospheric air and the surface of a meteoric body. These ideas are provisionally suitable to describe the flow around a body in a free molecular regime. Subsequently, the photometric approach was applied to all the meteor events including bolides. The main effort aimed to elaborate the approach included a choice of new formulas for the radiative efficiency.     

Calculation of energy characteristics of adsorption of metals

Within the framework of the electron density functional, a technique is developed for calculation of the adsorption energy and variation in the electron work function for metal substrates due to metal atom adsorption. The corrections to the local density approximation, which are associated with non-uniformity of the electron density in the subsurface region and discontinuous ion charge distribution over the crystal lattice sites, are included into consideration. It is shown that adsorption of alkali metal atoms results in lower electron work function, while that of transition metals (cobalt, iron, and chromium) might both decrease and increase the electron work function. Formation of a variety of adsorption structures from metal atoms depending on the temperature is discussed. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 7, pp. 14–19, July, 2007.     

Mechanisms of sublimation of silicon

An atomic modelling of the processes of desorption permits the determination of the energetically more favourable mechanisms of sublimation from a Si(111) surface. These include the creation of multi-vacancies, the presence of steps and the migration of atoms near the surface.     

Stability of families of probability distributions under reduction of the number of degrees of freedom

We consider two classes of probability distributions for configurations of the ideal gas. They depend only on kinetic energy and they remain of the same form when degrees of freedom are integrated out. The relation with equilibrium distributions of Tsallis’ thermostatistics is discussed.     

Amenability of discrete subgroups of the group of diffeomorphisms of the circle

The amenability of several discrete subgroups of the group of diffeomorphisms of the circle is proved.     

Influence of rate of change of frequency on the overall pitch of frequency-modulated tones

The mechanism(s) determining pitch may assign less weight to portions of a sound where the frequency is changing rapidly. The present experiments explored the possible effect of this on the overall pitch of frequency-modulated sounds. Pitch matches were obtained between an adjustable unmodulated sinusoid and a sinusoidal carrier that was frequency modulated using a highly asymmetric function with the form of a repeating U or inverted U shaped function. The amplitude was constant during the 400-ms presentation time of each stimulus, except for 10-ms raised-cosine onset and offset ramps. In experiment 1, the carrier level was 50 dB SPL and the geometric mean of the instantaneous frequency of the modulated carrier, fc, was either 0.5, 1, 2, or 8 kHz. The modulation rate (fm) was 5, 10, or 20 Hz. The overall depth (maximum to minimum) of the FM was 8% of fc. For all carrier frequencies, the matched frequency was shifted away from the mean carrier frequency, downwards for the U shaped function stimuli and upwards for the repeated inverted U shaped function stimuli. The shift was typically slightly greater than 1% of fc, and did not vary markedly with fc. The effect of fm was small, but there was a trend for the shifts to decrease with increasing fm for fc = 0.5 kHz and to increase with increasing fm for fc = 2 kHz. In experiment 2, the carrier level was reduced to 20 dB SL and matches were obtained only for fc = 2 kHz. Shifts in matched frequency of about 1% were still observed, but the trend for the shifts to increase with increasing fm no longer occurred. In experiment 3, matches were obtained for a 4-kHz carrier at 50 dB SPL. Shifts of about 1% again occurred, which did not vary markedly with fm. The shifts in matched frequency observed in all three experiments are not predicted by models based on the amplitude- or intensity-weighted average of instantaneous frequency (EWAIF or IWAIF). The shifts (and the pitch shifts observed earlier for two-tone complexes and for stimuli with simultaneous AM and FM) are consistent with a model based on the assumption that the overall pitch of a frequency-modulated sound is determined from a weighted average of period estimates, with the weight attached to a given estimate being inversely related to the short-term rate of change of period and directly related to a compressive function of the amplitude.     

利用神经网络提高编码器精度的方法

介绍了编码器误差的构成及特点，针对系统误差的分布规律与特点提出了基于神经网络的误差修正方法。采用非线性逼近精度较高的径向基函数神经网络，以采样点的角度值作为网络的输人样本，以高精度检测编码器的检测值作为学习目标建立了误差修正模型。实验结果表明，采用此种方法可将编码器的精度提高至原来的3倍以上，可有效地改善编码器的系统精度。     

The effect of hydration of ions of inorganic salts on the shape of the Raman stretching band of water

The shape of the Raman stretching band of water molecules in aqueous solutions of electrolytes KBr, KCl, KI, NaCl, and NaI is studied. It is confirmed that the characteristics of the stretching band strongly depend on the concentration and type of salt. The behavior of different parameters of the band is explained in terms of the theory of hydration of salts.     

Mechanism of film growth of pulsed electrodeposition of nanocrystalline copper in presence of thiourea

This article reports the effect of addition of small amount of thiourea on mechanism of film growth, levelling and grain refinement of pulsed electrodeposition of nanocrystalline copper on stainless steel substrate using simple aqueous acidic copper sulphate solution prepared from 0.25 M CuSO₄·5H₂O and 0.5 M H₂SO₄. The amount of thiourea used in the electrolyte is 0 and 36 mg/l. The results indicate the change in morphology of the deposits with addition of thiourea leading to dendrite free copper deposits. The growth mechanism of the copper deposition is found to change from Volmer–Weber type to Frank-Vander Merwe type making the deposits smoother when deposited with thiourea addition. A small amount (36 mg/l) of thiourea addition leads to decrease in the average grain size of copper from 1160 nm to 14 nm. The results clearly reveal the formation of nanocrystalline copper by addition of thiourea with three orders of magnitude reduction in grain size as compared to the sample deposited without thiourea. Preferential segregation of sulphur (present in thiourea) along the grain boundaries of nanocrystalline copper is shown by energy filter imaging using ultra high resolution transmission electron microscope (TEM), thereby restricting the growth of copper grains during pulsed electrodeposition.