Synthesis of 1,1′-methylenedi[(1R,1′R,3R,3′R,5R,5′R)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] and derivatives: precursors of long-chain polyketides

Racemic 1,1′-methylene[(1RS,1′RS,3RS,3′RS,5RS,5′RS)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] ((±)-6) derived from 2,2′-methylenedifuran has been resolved kinetically with Candida cyclindracea lipase-catalysed transesterification giving 1,1′-methylenedi[(1R,1′R,3R,3′R,5R,5′R)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] (−)-6 (30% yield, 98% ee) and 1,1′-methylenedi[(1S,1′S,3S,3′S,5S,5′S)-8-oxabicyclo[3.2.1]oct-6-en-3-yl] diacetate (+)-8, (40% yield, 98% ee). These compounds have been converted into 1,1′-methylenedi[(4S,4′S,6S,6′S)- and (4R,4′R,6R,6′R)-cyclohept-1-en-4,6-diyl] derivatives.     

Studies on the synthesis of biphenylneolignans. Part 1: Enantioselective synthesis of (S,S)- and (R,R)-2,2′-dimethoxy-4-(3-hydroxy-1-propenyl)-4′-(1,2,3-trihydroxypropyl)diphenyl ether

Two erythro-isomers of 2,2′-dimethoxy-4-(3-hydroxy-1-propenyl)-4′-(1,2,3-trihydroxypropyl)diphenyl ether, (7′S, 8′S)-9 and (7′R, 8′R)-9, were synthesized in seven steps, in which an improved method for the synthesis of the key intermediate 3 was developed. The absolute configuration of the target molecules was also confirmed.     

Enantioselektive Katalyse VII. Komplexe von (P(R,S),3R,4R,P′(R,S))-3,4-Bis(phenylphosphino)pyrrolidinen. Die Darstellung optisch reiner 1,2-Bisphosphanliganden mit vier Stereozentren, die zusätzliche funktionnelle Gruppen enthalten

Diastereomeric mixtures of the palladium, the platinum, and the rhodium complexes were prepared from [P(R,S),3R,4R,P′(R,S)]-3,4-bis(phenylphosphino)pyrrolidine (1a). The phosphorus atoms in bis[(P(R,S),3R,4R,P′(R,S))-1-(t-butoxycarbonyl)-3,4-bis(phenylphosphino)pyrrolidine-P,P′]dihalogenopalladium (2) can be alkylated stereoselectively with iodomethane. The P---H bonds in 2 open epoxides, and add to Michael systems, to give new ligands, which can be split off from the palladium with cyanide. The three isomerically pure [(PR,3R,4R,P′R)(PS,3R,4R,P′S)(PR,3R,4R,P′S)]-1-(t-butoxycarbonyl)-3,4- bis[(2-cyanoethyl)phenylphosphino]pyrrolidines were prepared via the neutral diiodopalladium complexes. [(PS,3R,4R,P′S)1-(t-butoxycarbonyl)-3,4-bis[(2-cyanoethyl)phenylphosphino]pyrrolidine-P,P′]diiodopalladium(II) (14-1) was characterised by X-ray crystallography.     

Synthesis of (2R,3S,4S)-4-aryl-3-hydroxyprolinols

Synthesis of (2R,3S,4S)-4-aryl-3-hydroxyprolinols has been established starting from 2-benzyloxymethylpyrrolidin-2-one framework, which is derived from commercially available trans-(2S,4R)-4-hydroxyproline. The single diastereomer having a trans–cis relative configuration with C₂ and C₃ and C₃ and C₄ is constructed in two one-pot functional group transformations of Grignard addition/dehydration and epoxidation/isomerization as the key steps in moderate yield.     

Asymmetric Synthesis via Acetal Templates. 14. Preparation of Enantiomerically Pure (3S,4S)- and (3S,4R)-Statine Derivatives

Several (3S,4S)- and (3S,4R)-statine derivatives have been prepared by attack of nucleophiles on crystalline, epimeric N-BOC-lactams 7a and 7b. The key step in the synthesis of the lactams was the TiCl₄-catalyzed coupling reactions of acetals derived from (R)-1,3-butanediol with allyltrimethylsilane.

Several enantiometrically pure (3S,4S- and (3S, 4R)-statine derivatives were made by sodium cyanide-catalyzed reaction of nucleophiles with the lactams 3a and 3b which were synthesized by the scheme 1 → 2 → 3.     

An unexpected [2+2]-cycloaddition reaction of 4-methyldithieno-[3,4-b:3′,2′-d]pyridinium iodide with dimethyl acetylenedicarboxylate

An unexpected [2+2]-cycloaddition occured in the reaction of 4-methyldithieno-[3,4-6:3′,2′-d]pyridinium iodide (3)with two equivalents of DMAD, giving 4-(trans-1,2-dicarbomethoxy-2- iodovinyl)-5-methyl-6,7-dicarbomethoxy-4,5-dihydrothieno [23-c]quinoline (4) in 54% yield. 4 is formed via 4-methyl-5-(trans-1,2-dicarbomethoxy-2-iodo-4,5-dihydrothieno [3,4-b:3′,2′-d]pyridine (16), followed by [2+2]-cycloaddition. The primary adduct rearranges via a thiepin to an episulfide which eliminates sulfur to give 4.     

Enzymatic production of (3S,4R)-(−)-4-(4′-fluorophenyl)-6-oxo-piperidin-3-carboxylic acid using a commercial preparation from Candida antarctica A: the role of a contaminant esterase

The enantioselective hydrolysis of (3RS,4RS)-trans-4-(4′-fluorophenyl)-6-oxo-piperidin-3-ethyl carboxylate (±)-2 was effected using a commercial preparation of lipase from C. antarctica A (CAL-A). We found that the hydrolytic activity of the lipase (immobilized on a number of very different supports) with this substrate was negligible. However, a contaminant esterase with Mw of 52 KDa from this commercial preparation exhibited much higher activity with (±)-2. This enzyme was purified and immobilized on PEI-coated support and the resulting enzyme preparation was highly enantioselective in the hydrolysis of (±)-2 (E >100), hydrolyzing only the (3S,4R)-(−)-3, which is a useful intermediate for the synthesis of pharmaceutically important (−)-paroxetine. Optimization of the reaction system was performed using a racemic mixture with a substrate concentration of 50 mM. This enzyme preparation was used in three reaction cycles and maintained its catalytic properties.     

3-exo,3′-exo-(1R,1′R)-Bithiocamphor — a versatile source for functionally different 3,3′-bibornane derivatives, II. 1 An access to 3-exo,3′-exo-(1r,1′r)-bicamphor and related compounds

3-exo,3′-exo-(1R,1′R)-bicamphor (12) is obtained from 3-exo,3′-exo-(1R,1′R)-bithtiocamphor (3) by condensation with hydrazine hydrate followed by hydrolysis of the resulting dihydropyridazine 11. Deprotonation of 12 with NaH and subsequent treatment with potassium hexacyanoferrate (III) furnishes the 2,2′-dioxo-3,3′-bibornanylidene 13, whilst reduction of 12 with L1AlH₄ affords the 3,3′-biisoborneol 16. Further related transformations to various 2,2′-difunctional 3,3′-bibornane derivatives are described, which are could be of interest as chiral ligands     

Catalytic and structural studies of Rh complexes of (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane. Asymmetric hydrogenation of acetophenonebenzylimine and acetophenone

Rhodium(I) complexes formed by (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane (BDPP) are efficient catalysts for the hydrogenation of acetophenone and acetophenonebenzylimine. The composition of the solvent mixture and the reaction temperature have a marked influenced on the enantioselectivity. These effects are thought to be related to the enhanced conformational flexibility of six-membered rings when simple substrates without functional groups are coordinated to the rhodium. X-ray crystallographic studies reveal that in [Rh((S,S)-BDPP)NBD]⁺ (1) the ligand is in a chair conformation, and that in [Rh((S,S)-BDPP)COD]⁺ (2) the chelate ring is in a δ-skew conformation. Studies of Rh((S,S)-BDPP)(NBD)Cl (3) in solution indicate a trigonal bipyramidal structure with a chair conformation of the ring in aromatic solvents and a conformationally labile ring in methanol.     

Enzymatic kinetic resolution of 1-(3′-furyl)-3-buten-1-ol and 2-(2′-furyl)-propan-1-ol

The enzymatic kinetic resolution of the racemic alcohols 1-(3′-furyl)-3-buten-1-ol (±)-1 and 2-(2′-furyl)propan-1-ol (±)-2 was investigated by screening a range of lipases and esterases for enantioselective transacylation, as well as for enantioselective hydrolysis. For both alcohols, lipase-catalyzed hydrolysis of the derived racemic acetate gave the best results for accessing the desired (S)-enantiomers. In the case of the secondary alcohol (±)-1, ASL turned out to be the optimum enzyme, whereas PPL was found to be superior in the case of the primary alcohol (±)-2. Additionally, an alternative access to (S)-2 via Oppolzer's camphor sultam methodology is described.     

Facile synthesis of enantiopure 1,1′-binaphthyl-2,2′-dicarboxylic acid via lipase-catalyzed kinetic resolution

Enantiopure 1,1′-binaphthyl-2,2′-dicarboxylic acids (R)-1 and (S)-1 have been synthesized through the lipase-catalyzed kinetic resolution of the racemic 2,2-bis(hydroxymethyl)-1,1′-binaphthyl (±)-2 and subsequent oxidation of the hydroxymethyl groups.     

The chemistry of phenalenium system—II 7,8,2′,3′,4′,5′-Hexachloro-11-methoxy-6H-cyclopenta[a]pyrene-6-spiro-1′-cyclopenta-2′,4′-diene

7,8,2′,3′,4′,5′-Hexachloro-11-methoxy-6H-cyclopenta[a]pyrene-6-spiro-1′-cyclopenta-2′,4′-diene 5 has been obtained by the reaction of phenalenone and 1,2,3,4-tetrachlorocyclopentadiene. The gross structure of 5 has been determined by the X-ray analysis. The ground-state properties of 5were discussed from the spectroscopic data, dipole moment and bond lengths.     

Investigation on lanthanide binuclear complexes of 1,5-bis-(1′-phenyl-3′-methyl-5′-pyrazolone-4′)-1,5-pentanedione and 2,2′-bipyridine

The coordination of 1,5-bis-(1′-phenyl-3′-methyl-5′-pyrazolone-4′)-1,5-pentanedione (BPMPPD) and 2,2′-bipyridine (bipy) with lanthanide ions in water-alcohol solution has been studied. Binuclear complexes of the types : Ln₂(BPMPPD)₃(bipy)₂·nH₂O (n = 2 for Y, n = 4 for Eu, Gd, Dy, Ho, Er, Tm and Yb); Ln₂(BPMPPD)₃bipy·nH₂O (n = 10 for La, n = 3 for Pr, Nd, Sm and Tb) were formed. The compounds were characterized by elemental analysis, molar conductance, IR, UV, ¹H NMR spectroscopy, thermogravimetric analysis and fluorescence spectra.     

Total, asymmetric synthesis of (1r-1-c-(6′-amino-7′h-purin-8′-yl)-1,4-anhydro-3-azido-2,3-dideoxy-d-erythro-pentitol.

The “naked sugar” (+)-(1R,2R,4R)-2-cyano-7-oxabicyclo[2.2.1]hept-5-en-2-exo-yl acetate ((+)-3) was converted in ten synthetic steps into the new C-nucleoside (1R)-1-C-(6′-amino-7′H-purin-8′-yl)-1,4-anhydro-3-azido-2,3-dideoxy- D-erythro-pentitol ((+)-2) in 19% overall yield.     

Molecular structure and electrochemical properties of the Pt complex of 1,1′-bis(methylthio)ferrocene and the Pd complexes of 1,4,7-trithia[7]- and 1,5,9-trithia[9] (1,1′)ferrocenophanes

Molecular structures of (triphenylphosphine) [1,1′-bis-(methylthio)ferrocene-S,S′,Fe]Pt(BF₄)₂ (1), (1,5,9-trithia[9]ferrocenophane-S,S′,S″,Fe)Pd(BF₄)₂ (2), and (acetonitrile)(1,4,7-trithia[7]ferrocenophane-S,S′,S″,Fe)Pd(BF₄)₂ (3) were determined by X-ray analyses. The Pt in 1 and the Pd atom in 2 have a somewhat distorted square-planar geometry including the Fe atom of the ferrocene moiety, while the Pd atom in 3 is coordinated by one equivalent of acetonitrile and takes a distorted tetragonal-pyramidal geometry. The distances of the Fe---M bond (M = Pd, Pt) in 1–3 are 2.851(2), 2.827(2), and 3.0962(8) Å, respectively. Cyclic voltammetry of 1–3 gave no reversible wave, but afforded some information supporting the presence of a dative bond.     

Enantioselective organic syntheses using chiral transition metal complexes V. (2S,3S)-Bis(dibenzophospholyl)butane, a rigid (S,S)-CHIRAPHOS analog

The P–Ph cleavage of phenyldibenzophosphole (1) with lithium in THF gives lithium dibenzophospholide (2). Reaction of 2 with ethyleneglycol ditosylate produces the known chelate ligand 1,2-bis(dibenzophospholyl)ethane (3) in good yield. Similarly, 2 and (2R,3R)-butanediol ditosylate give the new chiral chelate ligand (2S,3S)-bis(dibenzophospholyl)butane (4). Ligand exchange of [CpRu(PPh₃)₂Cl] with 3 or 4 yields the halfsandwich complexes [CpRu(C₁₂H₈PC₂H₄PC₁₂H₈)Cl] (5) and [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)Cl] (6). Complex 6 was characterized crystallographically (monoclinic, space group P2₁ (no. 4), a=820.6(4), b=1501.0(3), c=1172.8(6) pm, β=108.87(2)°, V=1.367(1)×10⁹ pm³, Z=2). The most conspicuous feature of the structure of 6 is the perfect coplanarity of the two dibenzophosphole moieties imposed by their steric interaction with the Cp ligand. Complex 6 and the thiophene complex [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)(SC₄H₄)]BF₄ (7) derived therefrom are remarkably unreactive with regard to ligand substitutions. A possible explanation is the lack of intramolecular

Full-size image

–C stabilization en route to the transition state of ligand substitution. The enantiomeric purity of 6 and 7 could nevertheless be demonstrated by conversion to diastereomerically pure [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)((S)-CNCHMePh)]BF₄ (8).     

Preliminary studies on the synthesis of rancinamycins from nitrosugars: first total synthesis of (3S,4S,5S,6R)-5-benzyloxy-6-hydroxy-3,4-(isopropylidendioxy)-cyclohex-1-enecarbaldehyde

The first total synthesis of (3S,4S,5S,6R)-5-benzyloxy-6-hydroxy-3,4-(isopropylidendioxy)-cyclohex-1-enecarbaldehyde from d-glucose is described. The key steps of this synthesis are the stereoselective Michael addition of 2-lithio-1,3-dithiane to 3-O-benzyl-5,6-dideoxy-1,2-O-isopropylidene-6-nitro--d-xilo-hex-5-enofuranose followed by the enantioselective two-step transformation of 3-O-benzyl-5,6-dideoxy-5-C-(1,3-dithian-2-yl)-6-nitro-β-l-idofuranose into (1S,2S,3S,4S,5S,6R)-5-benzyloxy-6-hydroxy-3,4-(isopropylidendioxy)-2-nitro-cyclohexanecarbaldehyde propylene dithioacetal, which was finally converted into the target compound.     

Stereoselective synthesis of (1R,2S)-2-amino-1,3-diols from (R)-cyanohydrins

Vinyl substituted (1R,2S)-amino alcohols 5 were obtained by addition of vinyl magnesium bromide to the corresponding cyanohydrin O-trimethylsilyl ethers (R)-2. The O- and N-protected vinyl amino alcohols 6 were ozonized at −78°C in methanol yielding (1R,2S)-2-amino-1,3-diols7 in high enantiomeric and diastereomeric excesses. For purification, compounds 7 in some cases were acetylated to give the derivatives (1R,2S)-8. Racemic 6a was converted by oxidative ozonolysis at −78°C in methanolic NaOH solution to the corresponding methyl N-acetyl-β-hydroxy propanoate 9a. The configuration of (1R,2S)-8a was confirmed by x-ray crystallographic analysis.     

Polyhydroxylated pyrrolizidines. Part 3: A new and short enantiospecific synthesis of (+)-hyacinthacine A2

(1R,2R,3R,7aR)-1,2-Dihydroxy-3-hydroxymethylpyrrolizidine (+)-Hyacinthacine A₂ 1 has been synthesized by Wittig's methodology using [(2′S,3′R,4′R,5′R)-3′,4′-dibenzyloxy-N-tert-butyloxycarbonyl-5′-tert-butyldiphenylsilyloxymethylpyrrolidin-2′-yl]carbaldehyde 3, prepared from a partially protected DMDP 2, and the appropriated ylide, followed by cyclization by an internal reductive amination process of the resulting unsaturated aldehyde 4 and total deprotection.     

Synthesis and olfactory properties of (−)-(1R,2S)-Georgywood

The enantiomers of Georgywood^® were synthesized from (E)-2-methyl-6-methylene-nona-2,7-diene and methacrylaldehyde followed by oxidation of the Diels–Alder adduct and classical racemate separation of the acid with optically-active N-methylephedrine. Conversion to the final ketone and olfactory evaluation showed that the (−)-(1R,2S)-enantiomer is more powerful by a factor of >100 than its antipode. The absolute configuration was determined by conformational studies and CD-analysis.