Synthesis and characterization of silver(I) adducts supported solely by 1,3,5-triazapentadienyl ligands or by triazapentadienyl and other N-donors

Halogenated 1,3,5-triazapentadienyl ligands [N{(C(3)F(7))C(C(6)F(5))N}(2)](-), [N{(CF(3))C(C(6)F(5))N}(2)](-) and [N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)](-), alone or in combination with other N-donors like CH(3)CN, CH(3)(CH(2))(2)CN, and N(C(2)H(5))(3), have been used in the stabilization of thermally stable, two-, three- or four-coordinate silver(i) adducts. X-Ray crystallographic analyses of {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag}(n), {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(NCCH(3))}(n), {[N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)]Ag(NCCH(3))}(n), {[N{(CF(3))C(C(6)F(5))N}(2)]Ag(NCCH(3))(2)}(n) and {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(NCC(3)H(7))}(n) revealed the presence of bridging 1,3,5-triazapentadienyl ligands bonded to silver through terminal nitrogen atoms. These adducts are polymeric in the solid state. [N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)]AgN(C(2)H(5))(3) is monomeric and features a 1,3,5-triazapentadienyl ligand bonded to Ag(I) in a κ(1)-fashion via only one of the terminal nitrogen atoms. The solid state structure of [N{(C(3)F(7))C(C(6)F(5))N}(2)]H has also been reported and it forms polymeric chains via inter-molecular N-H···N hydrogen-bonding.     

Gold(I) ethylene and copper(I) ethylene complexes supported by a polyhalogenated triazapentadienyl ligand

A rare gold(I) ethylene complex and the closely related copper(I) ethylene adduct have been isolated using [N{(C3F7)C(2,6-Cl2C6H3)N}2]- as the supporting ligand. [N{(C3F7)C(2,6-Cl2C6H3)N}2]Au(C2H4) (1) is an air-stable solid. It features a U-shaped triazapentadienyl ligand backbone and a three-coordinate, trigonal-planar gold center. The copper(I) adduct [N{(C3F7)C(2,6-Cl2C6H3)N}2]Cu(C2H4) (2) also has a similar structure. The 13C NMR signal corresponding to the ethylene carbons of 1 appears at about 64 ppm upfield from the free ethylene, while the ethylene carbons of 2 show a relatively smaller (39 ppm) upfield shift. [N{(C3F7)C(2,6-Cl2C6H3)N}2]M(C2H4) (M=Cu, Au) mediate carbene-transfer reactions from ethyl diazoacetate to saturated and unsaturated hydrocarbons.     

Synthesis and characterization of three-coordinate and related beta-diketiminate derivatives of manganese,iron, and cobalt

Treatment of M[N(SiMe(3))(2)](2) (M = Mn, Fe, Co) with various bulky beta-diketimines afforded a variety of new three-coordinate complexes which were characterized by UV-vis, (1)H NMR and IR spectroscopy, magnetic measurements, and X-ray crystallography. Reaction of the beta-diketimine H(Dipp)NC(Me)CHC(Me)N(Dipp) (Dipp(2)N(wedge)NH; Dipp = C(6)H(3)-2,6-Pr(i)(2)) with M[N(SiMe(3))(2)](2) (M = Mn or Co) gave Dipp(2)N(wedge)NMN(SiMe(3))(2) (M = Mn, 1; Co, 3) while the reaction of Fe[N(SiMe(3))(2)](2) with Ar(2)N(wedge)NH (Ar = Dipp, C(6)F(5), Mes, C(6)H(3)-2,6-Me(2), or C(6)H(3)-2,6-Cl(2)) afforded the series of iron complexes Ar(2)N(wedge)NFe[N(SiMe(3))(2)] (Ar = Dipp, 2a; C(6)F(5), 2b; Mes, 2c; C(6)H(3)-2,6-Me(2), 2d; C(6)H(3)-2,6-Cl(2), 2e). This represents a new synthetic route to beta-diketiminate complexes of these metals. The four-coordinate bis-beta-diketiminate complex Fe[N(wedge)N(C(6)F(5))(2)](2), 4, was also isolated as a byproduct from the synthesis of 2b. Direct reaction of the Dipp(2)N(wedge)NLi with CoCl(2) gave the "ate" salt Dipp(2)N(wedge)NCoCl(2)Li(THF)(2), 5, in which the lithium chloride has formed a complex with Dipp(2)N(wedge)NCoCl through chloride bridging. The Fe(III) species Dipp(2)N(wedge)NFeCl(2), 6, was obtained cleanly from the reaction of FeCl(3) with Dipp(2)N(wedge)NLi. Magnetic measurements showed that all the complexes have a high spin configuration. The different substituents in the series of iron complexes 2a-e allowed assignment of their paramagnetically shifted (1)H NMR spectra. The X-ray crystal structures 1-2d and 3 showed that they have a distorted three-coordinate planar configuration at the metals whereas complexes 4-6 have highly distorted four-coordinate geometries.     

A comparative study of the structures and reactivity of cyclometallated platinum compounds of N-benzylidenebenzylamines and cycloplatination of a primary amine

The reaction of cis-[PtCl(2)(dmso)2] with ligands 4-ClC(6)H(4)CHNCH(2)C(6)H(5) (1a) and 4-ClC(6)H(4)CHNCH(2)(4-ClC(6)H(4)) (1b) in the presence of sodium acetate and using either methanol or toluene as solvent produced the corresponding five-membered endo-metallacycles [PtCl{(4-ClC(6)H(3))CHNCH(2)C(6)H(5)}{SOMe(2)}] (2a) and [PtCl{(4-ClC(6)H(3))CHNCH(2)(4'-ClC(6)H(4))}{SOMe(2)}] (2b). An analogous reaction for ligands 2,6-Cl(2)C(6)H(3)CHNCH(2)C(6)H(5) (1c) and 2,6-Cl(2)C(6)H(3)CHNCH(2)(4-ClC(6)H(4)) (1d) produced five-membered exo-metallacycles [PtCl{(2,6-Cl(2)C(6)H(3))CHNCH(2)C(6)H(4)}{SOMe(2)}] (2c) and [PtCl{(2,6-Cl(2)C(6)H(3))CHNCH(2)(4'-ClC(6)H(3))}{SOMe(2)}] (2d) when the reaction was carried out in methanol and seven-membered endo-platinacycles [PtCl{(MeC(6)H(3))ClC(6)H(3)CHNCH(2)C(6)H(4)}{SOMe(2)}] (3c) and [PtCl{(MeC(6)H(3))ClC(6)H(3)CHNCH(2)(4'-ClC(6)H(3))}{SOMe(2)}] (3d) when toluene was used as a solvent. The reaction of 2,4,6-(CH(3))(3)C(6)H(2)CHNCH(2)(4-ClC(6)H(4)) (1e) produced in both solvents an exo-platinacycle [PtCl{(2,4,6-(CH(3))(3)C(6)H(2))CHNCH(2)(4'-ClC(6)H(3))}{SO(CH(3))(2)}] (2e). Cyclometallation of 4-chlorobenzylamine was also achieved to produce compound [PtCl{(4-ClC(6)H(3))CH(2)NH(2)}{SOMe(2)}] (2g). The reactions of endo- and exo-metallacycles with phosphines evidenced the higher lability of the Pt-N bond in exo-metallacycles while a comparative analysis of the crystal structures points out a certain degree of aromaticity in the endo-metallacycle.     

Reactions of substituted pyridines with electrophilic boranes

The lutidine derivative (2,6-Me(2))(4-Bpin)C(5)H(2)N when combined with B(C(6)F(5))(3) yields a frustrated Lewis pair (FLP) which reacts with H(2) to give the salt [(2,6-Me(2))(4-Bpin)C(5)H(2)NH][HB(C(6)F(5))(3)] (1). Similarly 2,2'-(C(5)H(2)(4,6-Me(2))N)(2) and (4,4'-(C(5)H(2)(4,6-Me(2))N)(2) were also combined with B(C(6)F(5))(3) and exposed to H(2) to give [(2,2'-HN(2,6-Me(2))C(5)H(2)C(5)H(2)(4,6-Me(2))N][HB(C(6)F(5))(3)] (2) and [(4,4'-HN(2,6-Me(2))C(5)H(2)C(5)H(2)(2,6-Me(2))N] [HB(C(6)F(5))(3)] (3), respectively. The mono-pyridine-N-oxide 4,4'-N(2,6-Me(2))C(5)H(2)C(5)H(2)(2,6-Me(2))NO formed the adduct (4,4'-N(2,6-Me(2))C(5)H(2)C(5)H(2)(2,6-Me(2))NO)(B(C(6)F(5))(3)) (4) which reacts further with B(C(6)F(5))(3) and H(2) to give [(4,4'-HN(2,6-Me(2))C(5)H(2)C(5)H(2)(2,6-Me(2))NO)B(C(6)F(5))(3)] [HB(C(6)F(5))(3)] (5). In a related sense, 2-amino-6-CF(3)-C(5)H(3)N reacts with B(C(6)F(5))(3) to give (C(5)H(3)(6-CF(3))NH)(2-NH(B(C(6)F(5))(3))) (6). Similarly, the species, 2-amino-quinoline, 8-amino-quinoline and 2-hydroxy-6-methyl-pyridine were reacted with B(C(6)F(5))(3) to give the products as (C(9)H(6)NH)(2-NHB(C(6)F(5))(3)) (7), (C(9)H(6)N)(8-NH(2)B(C(6)F(5))(3)) (8) and (C(5)H(3)(6-Me)NH)(2-OB(C(6)F(5))(3)) (9), respectively; while 2-amino-6-picoline, 2-amino-6-CF(3)-pyridine, 2-amino-quinoline, 8-amino-quinoline and 2-hydroxy-6-methyl-pyridine react with ClB(C(6)F(5))(2) to give the species (C(5)H(3)(6-R)NH)(2-NH(ClB(C(6)F(5))(2))) (R = Me (10), R = CF(3) (11)) (C(9)H(6)NH)(2-NH(ClB(C(6)F(5))(2))) (12), (C(9)H(6)N)(8-NH(2)ClB(C(6)F(5))(2)) (13) and (C(5)H(3)(6-Me)NH)(2-OClB(C(6)F(5))(2)) (14), respectively. In a similar manner, 2-amino-6-picoline and 2-amino-quinoline react with B(C(6)F(5))(2)H to give (C(5)H(3)(6-Me)NH)(2-NH(HB(C(6)F(5))(2))) (15) and (C(9)H(6)NH)(2-NH(HB(C(6)F(5))(2))) (16). The corresponding reaction of 8-amino-quinoline yields (C(9)H(6)N)(8-NHB(C(6)F(5))(2)) (17). In a similar fashion, reaction of 2-amino-6-CF(3)-pyridine resulted in the formation of (18) formulated as (C(5)H(3)(6-CF(3))N)(2-NH(B(C(6)F(5))(2)). Finally, treatment of 15 with iPrMgCl gave (C(9)H(6)N)(2-NH(B(C(6)F(5))(2))) (19). Crystallographic studies of 1, 2, 4, 6, 7, 10, 11, 12 and 15 are reported.     

Ni(II) and Fe(II) complexes based on bis(imino)aryl pincer ligands: synthesis, structural characterization and catalytic activities

Bis(imino)aryl NCN pincer Ni(II) complexes 2,6-(ArN=CH)(2)C(6)H(3)NiBr (1: Ar = 2,6-Me(2)C(6)H(3); 2: Ar = 2,6-Et(2)C(6)H(3); 3: Ar = 2,6-(i)Pr(2)C(6)H(3)) were prepared via the oxidative-addition of Ni(0)(Ph(3)P)(4) with bis(N-aryl)-2-bromoisophthalaldimine. These nickel complexes were characterized by NMR and elemental analyses. Their solid molecular structures were established by X-ray diffraction analyses. The nickel metal centers adopt distorted square planar geometries with the bromine atoms acting as one coordinate ligands. The NCN pincer Fe(II) complexes 2,6-(ArN=CH)(2)C(6)H(3)Fe(μ-Cl)(2)Li(THF)(2) (4: Ar = 2,6-Me(2)C(6)H(3); 5: Ar = 2,6-Et(2)C(6)H(3); 6: Ar = 2,6-(i)Pr(2)C(6)H(3)) were synthesized by lithium salt metathesis reactions of the ligand lithium salts with FeCl(2). X-ray structure analyses of 4 and 5 revealed that the Fe(II) complexes are hetero-dinuclear with the iron atoms in trigonal bipyramidal environments. When activated with MAO, the nickel complexes are active for norbornene vinyl polymerization but are inert for butadiene polymerization. The Fe(II) complexes show moderate activities in butadiene polymerization when activated with alkylaluminium, affording the cis-1,4 enriched polymer.     

Chromium complexes supported by phenanthrene-imine derivative ligands: synthesis, characterization and catalysis on isoprene cis-1,4 polymerization

Reactions of CrCl(2)(THF)(2) with N-aryl-9,10-iminophenanthraquinone in CH(2)Cl(2) give the monoimine chromium complexes (Ar)IPQCrCl(2)(THF)(2) (1, Ar = 2,6-Me(2)C(6)H(3); 2, Ar = 2,6-Et(2)C(6)H(3); 3, Ar = 2,6-(i)Pr(2)C(6)H(3)). Molecular structures of 1 and 3 were revealed to be monomeric with the chromium atoms in distorted octahedral geometries. Similar reactions of CrCl(2)(THF)(2) with N,N-bis(arylimino)phenanthrene ligands afford the diimine complexes (Ar1,Ar2)BIPCrCl(μ-Cl)(3)Cr(THF)(Ar1,Ar2)BIP (4, Ar(1) = Ar(2) = 2,6-Me(2)C(6)H(3); 5, Ar(1) = Ar(2) = 2,6-Et(2)C(6)H(3); 6, Ar(1) = Ar(2) = 2,6-(i)Pr(2)C(6)H(3); 7, Ar(1) = 2,6-Me(2)C(6)H(3), Ar(2) = 2,6-(i)Pr(2)C(6)H(3)). The X-ray diffraction analysis shows that 4, 5, and 7 are chlorine-bridged dimers with each chromium atom in a distorted octahedral geometry. Upon activation with MAO, all these complexes exhibit good catalytic activities for isoprene polymerization affording polyisoprene with predominantly a cis-1,4 unit.     

Dichlororuthenium(IV) complex of meso-tetrakis(2,6-dichlorophenyl)porphyrin: active and robust catalyst for highly selective oxidation of arenes, unsaturated steroids, and electron-deficient alkenes by using 2,6-dichloropyridine N-oxide

[Ru(IV)(2,6-Cl2tpp)Cl2], prepared in 90 % yield from the reaction of [Ru(VI)(2,6-Cl2tpp)O2] with Me3SiCl and structurally characterized by X-ray crystallography, is markedly superior to [Ru(IV)(tmp)Cl2], [Ru(IV)(ttp)Cl2], and [Ru(II)(por)(CO)] (por=2,6-Cl2tpp, F20-tpp, F28-tpp) as a catalyst for alkene epoxidation with 2,6-Cl2pyNO (2,6-Cl2tpp=meso-tetrakis(2,6-dichlorophenyl)porphyrinato dianion; tmp=meso-tetramesitylporphyrinato dianion; ttp=meso-tetrakis(p-tolyl)porphyrinato dianion; F20-tpp=meso-tetrakis(pentafluorophenyl)porphyrinato dianion; F28-tpp=2,3,7,8,12,13,17,18-octafluoro-5,10,15,20-tetrakis(pentafluorophenyl)porphyrinato dianion). The "[Ru(IV)(2,6-Cl2tpp)Cl2]+2,6-Cl2pyNO" protocol oxidized, under acid-free conditions, a wide variety of hydrocarbons including 1) cycloalkenes, conjugated enynes, electron-deficient alkenes (to afford epoxides), 2) arenes (to afford quinones), and 3) Delta5-unsaturated steroids, Delta4-3-ketosteroids, and estratetraene derivatives (to afford epoxide/ketone derivatives of steroids) in up to 99 % product yield within several hours with up to 100 % substrate conversion and excellent regio- or diastereoselectivity. Catalyst [Ru(IV)(2,6-Cl2tpp)Cl2] is remarkably active and robust toward the above oxidation reactions, and turnover numbers of up to 6.4x10(3), 2.0x10(4), and 1.6x10(4) were obtained for the oxidation of alpha,beta-unsaturated ketones, arenes, and Delta5-unsaturated steroids, respectively.     

A convenient synthesis of new isolable phosphaalkenes using the base-induced rearrangement of secondary vinylphosphines

The secondary vinylphosphines Ar(F)P(H)C(R)[double bond]CH(2) [2a, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = CH(3); 2b, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = C(6)H(5); 2c, Ar(F) = 2,4,6-(CF(3))(3)C(6)H(2), R = CH(3)] were prepared by treating the corresponding dichlorophosphine Ar(F)PCl(2) (1) with H(2)C[double bond]C(R)MgBr. In the presence of catalytic base (DBU or DABCO) the vinylphosphines (2a-c) undergo quantitative 1,3-hydrogen migration over 3 d to give stable and isolable phosphaalkenes Ar(F)P=C(R)CH(3) (3a, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = CH(3); 3b, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = C(6)H(5); 3c, Ar(F) = 2,4,6-(CF(3))(3)C(6)H(2), R = CH(3)). Under analogous conditions, only 90% conversion is observed in the base-catalyzed rearrangement of MesP(H)C(CH(3))[double bond]CH(2) to MesP[double bond]C(CH(3))(2). Presumably, the increase in acidity of the P-H group when electron-withdrawing groups are employed (i.e. 2a-c) favors quantitative rearrangement to the phosphaalkene tautomer (3a-c). Thus, the double-bond migration reaction is a convenient and practical method of preparing new phosphaalkenes with C-methyl substituents.     

Reduction of terphenyl Co(II) halide derivatives in the presence of arenes: insertion of Co(I) into a C-F bond

Reduction of [(3,5-(i)Pr(2)-Ar*)Co(μ-Cl)](2) (3,5-(i)Pr(2)-Ar* = -C(6)H-2,6-(C(6)H(2)-2,4,6-(i)Pr(3))(2)-3,5-(i)Pr(2)) with KC(8) in the presence of various arene molecules resulted in the formation of a series of terphenyl stabilized Co(I) half-sandwich complexes (3,5-(i)Pr(2)-Ar*)Co(η(6)-arene) (arene = toluene (1), benzene (2), C(6)H(5)F (3)). X-ray crystallographic studies revealed that the three compounds adopt similar bonding schemes but that the fluorine-substituted derivative 3 shows the strongest cobalt-η(6)-arene interaction. In contrast, C-F bond cleavage occurred when the analogous reduction was conducted in the presence of C(6)F(6), affording the salt K[(3,5-(i)Pr(2)-Ar*)Co(F)(C(6)F(5))] (4), in which there is a three-coordinate cobalt complexed by a fluorine atom, a C(6)F(5) group, and the terphenyl ligand Ar*-3,5-(i)Pr(2). This salt resulted from the formal insertion of a putative 3,5-(i)Pr(2)-Ar*Co species as a neutral or anionic moiety into one of the C-F bonds of C(6)F(6). Reduction of [(3,5-(i)Pr(2)-Ar*)Co(μ-Cl)](2) in the presence of bulkier substituted benzene derivatives such as mesitylene, hexamethylbenzene, tert-butylbenzene, or 1,3,5-triisopropylbenzene did not afford characterizable products.     

Synthesis of Al complexes containing phenoxy-imine ligands and their use as the catalyst precursors for efficient living ring-opening polymerisation of epsilon-caprolactone

Al complexes containing phenoxy-imine ligands of type, Me2Al[O-2-R1-6-(R2N=CH)C6H3] [R1 = Me, R2 = 2,6-iPr2C6H3 (1a), tBu (1b); R1 = tBu, R2 = 2,6-iPr2C6H3 (2a), tBu (2b), cyclohexyl (2c), adamantyl (2d), C6H5 (2e), 2,6-Me2C6H3 (2f), C6F5 (2g)] have been prepared in high yields from AlMe3 by treating with 1.0 equiv. of 2-R1-6-(R2N=CH)C6H3OH in n-hexane. Structures for 1a, 1b, 2a-e and 2g were determined by X-ray crystallography, and these complexes have a distorted tetrahedral geometry around Al; both the Al-O and the Al-N bond distances were influenced by substituents in both the aryloxo and the imino groups. Me2Al[mu2-O-2-(R2N=CH)C6H4](AlMe3) [R2 = 2,6-iPr2C6H3 (3a), tBu (3b)] were prepared exclusively by reaction of AlMe3 with 2-(R2N=CH)C6H4OH, and these complexes form a distorted tetrahedral geometry around each Al centre with additional AlMe3 coordinating to the oxygen in the phenoxy-imine ligand. Complexes 1a, 1b and 2a-g were tested as catalyst precursors for ring-opening polymerisation (ROP) of epsilon-caprolactone (CL) in the presence of (n)BuOH (1.0 equiv. to Al), and their catalytic activities were strongly influenced by the imino substituent (R2). The efficient ROP has been achieved using the C6F5 analogue (2g), with the ROP taking place in a living manner.     

Rare earth metal bis(amide) complexes bearing amidinate ancillary ligands: synthesis, characterization, and performance as catalyst precursors for cis-1,4 selective polymerization of isoprene

A family of rare earth metal bis(amide) complexes bearing monoanionic amidinate [RC(N-2,6-Me(2)C(6)H(3))(2)](-) (R = cyclohexyl (Cy), phenyl (Ph)) as ancillary ligands were synthesized and characterized. One-pot salt metathesis reaction of anhydrous LnCl(3) with one equivalent of amidinate lithium [RC(N-2,6-Me(2)C(6)H(3))(2)]Li, following the introduction of two equivalents of NaN(SiMe(3))(2) in THF at room temperature afforded the neutral and unsolvated mono(amidinate) rare earth metal bis(amide) complexes [RC(N-2,6-Me(2)C(6)H(3))(2)]Y[N(SiMe(3))(2)](2) (R = Cy (1); R = Ph (2)), and the "ate" mono(amidinate) rare earth metal bis(amide) complex [CyC(N-2,6-Me(2)C(6)H(3))(2)]Lu[N(SiMe(3))(2)](2)(μ-Cl)Li(THF)(3) (3) in 61-72% isolated yields. These complexes were characterized by elemental analysis, NMR spectroscopy, FT-IR spectroscopy, and X-ray single crystal diffraction. Single crystal structural determination revealed that the central metal in complexes 1 and 2 adopts a distorted tetrahedral geometry, and in complex 3 forms a distorted trigonal bipyramidal geometry. In the presence of AlMe(3), and in combination with one equimolar amount of [Ph(3)C][B(C(6)F(5))(4)], complexes 1 and 2 showed high activity towards isoprene polymerization to give high molecular weight polyisoprene (M(n) > 10(4)) with good cis-1,4 selectivity (>90%).     

Catalytic ethylene polymerisation in carbon dioxide as a reaction medium with soluble nickel(II) catalysts

A series of neutral Ni(II)-salicylaldiminato complexes substituted with perfluorooctyl- and trifluoromethyl groups, [Ni{kappa(2)-N,O-6-C(H)==NAr-2,4-R'(2)C(6)H(2)O}(Me)(pyridine)] (6 a: Ar=2,6-{4-(F(17)C(8))C(6)H(4)}(2)C(6)H(3), R'=I; 6 b: Ar=2,6-{4-(F(3)C)C(6)H(4)}(2)C(6)H(3), R'=I; 6 c: Ar=2,6-{3,5-(F(3)C)(2)C(6)H(3)}(2)C(6)H(3), R'=3,5-(F(3)C)(2)C(6)H(3); 6 d: Ar=2,6-{4-(F(17)C(8))C(6)H(4)}(2)C(6)H(3), R'=3,5-(F(3)C)(2)C(6)H(3); 6 e: Ar=2,6-{3,5-(F(3)C)(2)C(6)H(3)}(2)C(6)H(3), R'=I) were studied as catalyst precursors for ethylene polymerisation in supercritical CO(2). Catalyst precursors 6 a and 6 c, which are soluble in scCO(2), afford the highest polymer yields, corresponding to 2 x 10(3) turnovers. Semicrystalline polyethylene (M(n) typically 10(4) g mol(-1)) is obtained with variable degrees of branching (11 to 24 branches per 1000 carbon atoms, predominantly Me branches) and crystallinities (54 to 21 %), depending on the substitution pattern of the catalyst.     

Steric control of substituted phenoxide ligands on product structures of uranyl aryloxide complexes

A series of uranyl aryloxide complexes has been prepared via metathesis reactions between [UO(2)Cl(2)(THF)(2)](2) and di-ortho-substituted phenoxides. Reaction of 4 equiv of KO-2,6-(t)()Bu(2)C(6)H(3) with [UO(2)Cl(2)(THF)(2)](2) in THF produces the dark red uranyl compound, UO(2)(O-2,6-(t)()Bu(2)C(6)H(3))(2)(THF)(2).THF, 1. Single-crystal X-ray diffraction analysis of 1 reveals a monomer in which the uranium is coordinated in a pseudooctahedral fashion by two apical oxo groups, two cis-aryloxides, and two THF ligands. A similar product is prepared by reaction of KO-2,6-Ph(2)C(6)H(3) with [UO(2)Cl(2)(THF)(2)](2) in THF. Single-crystal X-ray diffraction analysis of this compound reveals it to be the trans-monomer UO(2)(O-2,6-Ph(2)C(6)H(3))(2)(THF)(2), 2. Dimeric structures result from the reactions of [UO(2)Cl(2)(THF)(2)](2) with less sterically imposing aryloxide salts, KO-2,6-Cl(2)C(6)H(3) or KO-2,6-Me(2)C(6)H(3). Single-crystal X-ray diffraction analyses of [UO(2)(O-2,6-Cl(2)C(6)H(3))(2)(THF)(2)](2), 3, and [UO(2)Cl(O-2,6-Me(2)C(6)H(3))(THF)(2)](2), 4, reveal similar structures in which each U atom is coordinated by seven ligands in a pseudopentagonal bipyramidal fashion. Coordinated to each uranium are two apical oxo groups and five equatorial ligands (3, one terminal phenoxide, two bridging phenoxides, and two nonadjacent terminal THF ligands; 4, one terminal chloride, two bridging phenoxides, and two nonadjacent terminal THF ligands). Apparently, the phenoxide ligand steric features exert a greater influence on the solid-state structures than the electronic properties of the substituents. Emission spectroscopy has been utilized to investigate the molecularity and electronic structure of these compounds. For example, luminescence spectra taken at liquid nitrogen temperature allow for a determination of the dependence of the molecular aggregation of 3 on the molecular concentration. Electronic and vibrational spectroscopic measurements have been analyzed to examine trends in emission energies and stretching frequencies. However, comparison of the data for compounds 1-4 reveals that the innate electron-donating capacity of phenoxide ligands is only subtly manifest in either the electronic or vibrational energy distributions within these molecules.     

MOLECULAR STRUCTURE OF ORGANOLANTHANIDE COMPLEX [Li(THF)_4]_2[{ (η~5-CH_3C_5H_4)NdCl(μ_2-Cl)NdCl_2(η~5-CH_3C_5H_4)}_2(μ_4-O)]

<正> The crystal structure of the complex [Li(THF)4]2[{(η5-CH3C5H4)Nd-Cl(μ2-Cl)NdCl2(η5-CH3C5H4)}2(μ4-O)] has been determined by X-ray diffraction technique. The crystal is monoclinic of space group C2/c with a = 22. 740(7) ,b= 18. 319 (6),c=18. 330(6) A,β=93. 04(3)°,V = 7624. 93A3,Dc= 1. 55g/cm3,Z = 4,F(000) = 2800,μ=15. 02cm-1. The complex is consisted of two [Li(THF)4]+cations and one [{(η5-CH3C5H4)NdCl(μ2-Cl)NdCl2(η5-CH3C5H4)}2(μ4-O)]2-dianion. The two units [Cη5-CH3C5H4)NdCl(μ2-Cl)NdCl2(η5-CH3C5H4)] in the tetra nnclear-neodymium dianion are connected by a μ4-O bridge with the average Nd -μ4-O 2. 36(1) A ,Nd -C(ring) 2. 76(3)A,Nd-Cl 2. 823(7)A and Nd-μ2-Cl 2. 798(7)A.     

Utility of Arylamido Ligands in Yttrium and Lanthanide Chemistry(1)

The reactivity of KNHAr reagents (Ar = C(6)H(5), C(6)H(3)Me(2)-2,6, C(6)H(3)(i)Pr(2)-2,6) with lanthanide and yttrium trichlorides has been investigated. With the larger metals Nd and Sm and the smaller 2,6-dimethyl-substituted ligand, the bimetallic dianionic complexes [K(THF)(6)](2)[Ln(&mgr;-NHC(6)H(3)Me(2)-2,6)(NHC(6)H(3)Me(2)-2,6)(3)](2) (Ln: Sm, 1a; Nd, 1b) are isolated as the potassium salts. Under the same reaction conditions YCl(3) forms a bimetallic anion which retains chloride: [K(DME)(2)(THF)(3)][Y(2)(&mgr;-NHC(6)H(3)Me(2)-2,6)(2)(&mgr;-Cl)(NHC(6)H(3)Me(2)-2,6)(4)(THF)(2)], 2. With the larger 2,6-diisopropyl ligands, neutral complexes are isolated in both solvated monometallic and unsolvated bimetallic forms. With Nd, a distorted octahedral trisolvate, Nd(NHC(6)H(3)(i)Pr(2)-2,6)(3)(THF)(3), 3, was obtained, whereas with Yb and Y the trigonal bipyramidal disolvates, Ln(NHC(6)H(3)(i)Pr(2)-2,6)(3)(THF)(2) (Ln: Yb, 4a; Y, 4b), were isolated. THF-free complexes of the NHC(6)H(3)(i)Pr(2)-2,6 ligand are available by reacting the amine NH(2)C(6)H(3)(i)Pr(2)-2,6 with Ln[N(SiMe(3))(2)](3) complexes. By this route, the dimers [Ln(&mgr;-NHC(6)H(3)(i)Pr(2)-2,6)(NHC(6)H(3)(i)Pr(2)-2,6)(2)](2) (Ln: Yb, 5a; Y, 5b) were isolated. The reaction of the unsubstituted arylamido salt KNHC(6)H(5) with NdCl(3) produced an insoluble material which was characterized as [Nd(NHC(6)H(5))(3)(KCl)(3)], 6. 6 reacted with Al(2)Me(6) in hexanes and produced a heteroleptic mixed-metal complex {[Me(2)Al(&mgr;-Me(2))](2)Nd(&mgr;(3)-NC(6)H(5))(&mgr;-Me)AlMe}(2), 7, and the trimeric aluminum arylamido complex [Me(2)Al(&mgr;-NHC(6)H(5))](3), 8. The solvent of crystallization and relevant crystallographic data for the compounds identified by X-ray analysis follow: 1a,THF, 156 K, P2(1)/n, a = 12.985(2) ?, b = 27.122(5) ?, c = 17.935(3) ?, beta = 100.19(1) degrees, V = 6216(1) ?(3), Z = 2, 6148 reflections (I > 3sigma(I)), R(F)() = 7.1%; 1b,THF, 156 K, P2(1)/n, a = 12.998(2) ?, b = 27.058(3) ?, c = 17.962(2) ?, beta = 99.74(1) degrees, V = 6225(1) ?(3), Z = 2; 2,DME/hexanes, P2(1)/n, a = 23.335(2) ?, b = 12.649(1) ?, c = 27.175(3) ?, beta = 96.36(1) degrees, V = 7971(1) ?(3), Z = 4, 2788 reflections (I > 3sigma(I)), R(F)() = 9.5%; 3, THF, P2(1), a = 12.898(1) ?, b = 16.945(1) ?, c = 13.290(1) ?, beta = 118.64(2) degrees, V = 2549.3(3) ?(3), Z = 2, 3414 reflections (I > 3sigma(I)), R(F)() = 4.3%; 4a, hexanes, P2(1), a = 9.718(2) ?, b = 19.119(3) ?, c = 12.640(2) ?, beta = 112.08(1) degrees, V = 2176.3(6) ?(3), Z = 2, 2933 reflections (I > 3sigma(I)), R(F)() = 4.3%; 4b, hexanes, 158 K, a = 9.729(2) ?, b = 19.095(5) ?, c = 12.744(1) ?, beta = 112.11(1) degrees, V = 2193.4(6) ?(3); 5b, hot toluene, 158 K, P2(1), a =19.218(9) ?, b = 9.375(3) ?, c = 19.820(5) ?, beta = 110.25(2) degrees, V = 3350(2)?(3), Z = 2, 1718 reflections (I > 2sigma (I)), R1 = 9.7%; 7, hexanes, 156 K, P&onemacr;, a = 9.618(3) ?, b = 12.738(4) ?, c = 9.608(3) ?, alpha = 99.32(1) degrees, beta = 108.87(1) degrees, gamma = 94.23(1) degrees, V = 1089.1(6) ?(3), Z = 2, 2976 reflections (I > 3sigma(I)), R(F)() = 3.9%; 8, hexanes, 156 K, Pcab, a = 23.510(5) ?, b = 25.462(5) ?, c = 8.668(2) ?, V = 5188(1) ?(3), Z = 8, 1386 reflections (I > 3sigma(I)), R(F)() = 5.7%.     

Metal versus ligand alkylation in the reactivity of the (bis-iminopyridinato)Fe catalyst

The alkylation of the Brookhart-Gibson {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)} FeCl2 precatalyst with 2 equiv of LiCH2Si(CH3)3 led to the isolation of several catalytically very active products depending on the reaction conditions. The expected dialkylated species {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2}(C5H3N)Fe(CH2SiMe3)2 (2) was indeed the major component of the reaction mixture. However, other species in which alkylation occurred at the pyridine ring ortho position, {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2-2-CH2SiMe3}(C5H3N)Fe(CH2SiMe3) (1), and at the imine C atom, {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC(CH3)(CH2 SiMe3)](C5H3N)}Fe(CH2SiMe3) (3), have also been isolated and fully characterized. In addition, deprotonation of the methyl-imino functions and formation of a new divalent Fe catalyst {[2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}Fe(mu-Cl)Li(THF)3 (4) also occurred depending on the reaction conditions. In turn, the formation of 4 might trigger the reductive coupling of two units through the methyl-carbon wings. This process resulted in the one-electron reduction of the metal center, affording a dinuclear Fe(I) alkyl catalyst {[{[2,6-(i-Pr)2C6H5]N=C(CH3)}(C5H3N){[2,6-(i-Pr)26H5]N=CCH2}Fe(CH2SiMe3)]}2 (5). Different from other metal derivatives, complex 5 could not be prepared from the monodeprotonated version of the ligand. Its reaction with a mixture of FeCl2 and RLi afforded instead [{2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}FeCH2Si(CH3)3][Li(THF)4] (6) which is also catalytically active. All of these high-spin species have been shown to have high catalytic activity for olefin polymerization, producing polymers of two distinct natures, depending on the formal oxidation state of the metal center.     

New methodologies for the preparation of porphodimethenes and their conversion to trans-porphyrins with functionalized naphthyl spacers

The MacDonald [2 + 2]-type condensation of readily available 5-aryl-substituted dipyrromethanes with acenaphthenequinone leads to the trans-syn- and anti-porphodimethenes, which in turn can be converted to the alpha,alpha- and alpha,beta-porphyrin atropisomers, respectively. Treatment of the metalated or unmetalated porphodimethenes with KOH or NaOMe in THF followed by protonation with HCl results in a ring opening of the acenaphthenone and formation of the trans-8-carboxynaphthylporphyrins or their esters (NaOMe) after oxidation. Alternatively, the porphyrin formation can be accomplished by reaction of the porphodimethenes with acids in the presence of water or methanol. Reaction with NaBH(4) in a THF--methanol mixture yields the corresponding dialcohols in nearly quantitative yields. Sixteen different building blocks were prepared in order to evaluate the generality of this new synthetic approach, with Ar = 2,4,6-Me(3)C(6)H(2); 2,6-Cl(2)C(6)H(3); 2,6-F(2)C(6)H(3); 3,4-tBu(2)C(6)H(3); 3,4,5-(MeO)(3)C(6)H(2); 4-BrC(6)H(4); 4-MeC(6)H(4); and 4-MeOOCC(6)H(4) at the meso positions. The synthesized porphodimethenes and porphyrins have been fully characterized, and the X-ray structure analyses of three representative derivatives are presented.     

Gallium-boron donor-acceptor bonds

Examples of compounds with gallium-boron donor-acceptor bonds, HC[MeC(2,6-pri2C6H3)N]2Ga-->B(C6F5)3 3 and (eta 5-C5Me5)Ga-->B(C6F5)3 4 have been prepared by treatment of the free gallanediyls with B(C6F5)3; the structures of both compounds were determined by X-ray crystallography.     

Synthesis, characterization, and hydrolysis of aluminum(III) compounds bearing the C6F5-substituted beta-diketiminate HC[(CMe)(NC6F5)]2 (L) ligand

A series of Al(III) compounds containing the C6F5-substituted beta-diketiminate ligands LAlMeCl (2), LAlMe2 (3), LAlMeI (4), and LAlBr2 (5) (L = HC[(CMe)(NC6F5)]2) were synthesized and characterized. The hydrolysis of 2 and 4 in the presence of 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene as the hydrogen halide acceptor both lead to (LAlMe)2(mu-O) (6), a methylalumoxane derivative, which is the first hydrolysis product with the general formula of (RAlMe)(n)O. A comparison of the hydrolysis products of 2 and 4 with that of L'AlMeCl (L' = HC[(CMe)(NAr)]2, Ar = 2,6-iPr2C6H3) shows that with the C6F5-substituted beta-diketiminate ligand, it was not possible to generate LAlMe(OH). This is obviously due to the stronger Br?nsted acidity of the proton and the smaller size of the C6F5 group in this compound compared to that of the corresponding 2,6-iPr2C6H3 derivative.