1‐(2,6‐dibenzhydryl‐4‐fluorophenylimino)‐2‐aryliminoacenaphthylylnickel halides highly polymerizing ethylene for the polyethylenes with high branches and molecular weights

A series of 1‐(2,6‐dibenzhydryl‐4‐fluorophenylimino)‐ 2‐aryliminoacenaphthylene derivatives ( L1–L5 ) and their halonickel complexes LNiX₂ (X = Br, Ni1–Ni5 ; X = Cl, Ni6–Ni10 ) are synthesized and well characterized. The molecular structures of representative complexes Ni2 and Ni4 are confirmed as the distorted tetrahedron geometry around nickel atom by the single crystal X‐ray diffraction. Upon activation with methylaluminoxane, all nickel complexes show high activities up to 1.49 × 10⁷ g of PE (mol of Ni)^?1 h^?1 toward ethylene polymerization, producing polyethylenes with high branches and molecular weights up to 1.62 × 10⁶ g mol^?1 as well as narrow polydispersity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1369–1378     

Achieving branched polyethylene waxes by aryliminocycloocta[b]pyridylnickel precatalysts: Synthesis,characterization, and ethylene polymerization

Cycloocta[b ]pyridin‐10‐one was prepared to form the corresponding imino derivatives, which then reacted with (DME)NiBr₂ to form 10‐aryliminocycloocta[b ]pyridylnickel bromides ( Ni1 – Ni5 ). The new compounds were characterized by means of FT‐IR spectroscopy as well as elemental analysis and the organic ligands were also analyzed by the NMR measurements. Furthermore, the molecular structure of a representative complex Ni3 was determined by the single crystal X‐ray diffraction, indicating the distorted tetrahedral geometry around the nickel atom. Upon the activation with either methylaluminoxane (MAO) or diethylaluminium chloride (Et₂AlCl), the title nickel complexes exhibited high activity in ethylene polymerization and produced polyethylene of low molecular weight (1.43–6.78 kg mol^?1) and low dispersity (1.7–2.4), which suggests a single‐site catalytic system. More importantly, the microstructure of the resultant polyethylene (especially degree of branching) and certain physical properties, such as T _m values, can easily be modulated by selecting the proper substituents within the ligands and adjusting the polymerization conditions. This finding demonstrates that it is plausible to use a single catalyst for synthesizing different types of polyethylene on demand.10‐Aryliminocycloocta[b ]pyridylnickel bromides ( Ni1–Ni5 ), upon activation with either MAO or Et₂AlCl, exhibited high activity towards ethylene polymerization and produced polyethylenes with low molecular weight (1.43–6.78 kg mol^?1) and low dispersity (1.7–2.4). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2601–2610     

Alkylaluminum activator effects on polyethylene branching using a N,N′‐nickel precatalyst appended with bulky 4,4′‐dimethoxybenzhydryl groups

Ten unsymmetrical N,N'‐bis (imino) acenaphthene‐nickel (II) halide complexes, [1‐[2,6‐{(4‐MeOC₆H₄)₂CH}₂–4‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂, each appended with one N‐2,6‐bis(4,4'‐dimethoxybenzhydryl)‐4‐methylphenyl group, have been synthesized and characterized. The molecular structures of Ni1 , Ni3 , Ni5 and Ni6 highlight the variation in steric protection afforded by the inequivalent N‐aryl groups; a distorted tetrahedral geometry is conferred about each nickel center. On activation with diethylaluminum chloride (Et₂AlCl) or methylaluminoxane (MAO), all complexes showed high activity at 30°C for the polymerization of ethylene with the least bulky bromide precatalysts ( Ni1 and Ni4 ), generally the most productive, forming polyethylenes with narrow dispersities [M_w/M_n: < 3.4 (Et₂AlCl), < 4.1 (MAO)] and various levels of branching. Significantly, this level of branching can be influenced by the type of co‐catalyst employed, with Et₂AlCl having a predilection towards polymers displaying significantly higher branching contents than with MAO [T_m: 33.0–82.5°C (Et₂AlCl) vs. 117.9–119.4°C (MAO)]. On the other hand, the molecular weights of the materials obtained with each co‐catalyst were high and, in some cases, entering the ultra‐high molecular weight range [M_w range: 6.8–12.2 × 10⁵ g mol^?1 (Et₂AlCl), 7.2–10.9 × 10⁵ g mol^?1 (MAO)]. Furthermore, good tensile strength (ε_b up to 553.5%) and elastic recovery (up to 84%) have been displayed by selected more branched polymers highlighting their elastomeric properties.     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate): Synthesis,characterization, and their catalytic behaviors for ethylene polymerization

A series of 6‐(benzimidazol‐2‐yl)‐N‐organylpyridine‐2‐carboxamide were synthesized and transformed into 6‐benzimidazolylpyridine‐2‐carboxylimidate as dianionic tridentate ligands. Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride ( C1 ) and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate) ( C2 – C8 ) were synthesized in acceptable yields. These complexes were systematically characterized by elemental and NMR analyses. Crystallographic analysis revealed the distorted octahedral geometry around titanium in both complexes C1 and C4 . Using MAO as cocatalyst, all complexes exhibited from good to high catalytic activities for ethylene polymerization. The neutral bis(6‐benzimidazolylpyridine‐2‐carboxylimidate)titanium ( C2 – C8 ) showed high catalytic activities and good stability for prolonged reaction time and elevated reaction temperature; however, C1 showed a short lifetime in catalysis as being observed at very low activity after 5 min. The elevated reaction temperature enhanced the productivity of polyethylenes with low molecular weights, whereas the reaction with higher ethylene pressure resulted in better catalytic activity and resultant polyethylenes with higher molecular weights. At higher ratio of MAO to titanium precursor, the catalytic system generated better activity with producing polyethylenes with lower molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3411–3423, 2008     

Activity and stability spontaneously enhanced toward ethylene polymerization by employing 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl) pyridyliron(II) dichlorides

A series of 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridyliron(II) complexes ( Fe1 ? Fe5 ) was synthesized and characterized. The molecular structure of the representative Fe2 was determined by single‐crystal X‐ray diffraction, revealing a distorted pseudo‐square‐pyramidal geometry around the iron center. On activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all these iron complex precatalysts performed with high activities (up to 1.58 × 10⁷ g (PE) mol^?1 (Fe) h^?1) toward ethylene polymerization, producing highly linear polyethylenes with high molecular weight and bimodal distribution, which was in accordance with high temperature ¹³C NMR, high T _m values (T _m ～130 °C) and the GPC curves of the obtained polyethylenes. Meanwhile, DFT calculation results also showed the good correlation between net charges on iron and experimental activities. Compared with previous bis(imino)pyridyliron analogues, the current iron complexes containing the benzhydrylnaphthyl groups exhibited relatively higher activities and better thermal‐stability at elevated temperatures, especially at 80 °C as the industrial operating temperature, and still showed high activities toward ethylene polymerization up to 8.57 × 10⁶ g (PE) mol^?1 (Fe) h^?1 in the presence of co‐catalyst MMAO. In addition, these iron complex precatalysts all exhibited long lifetimes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 988–996     

Molecular weight control of polyethylene waxes using a constrained imino‐cyclopenta[b]pyridyl‐nickel catalyst

Five examples of nickel(II) bromide complexes bearing N,N‐imino‐cyclopenta[b ]pyridines, [7‐(ArN)‐6,6‐Me₂C₈H₅N]NiBr₂ (Ar = 2,6‐Me₂C₆H₃ ( Ni1 ), 2,6‐Et₂C₆H₃ ( Ni2 ), 2,6‐i‐ Pr₂C₆H₃ ( Ni3 ), 2,4,6‐Me₃C₆H₂ ( Ni4 ), 2,6‐Et₂‐4‐MeC₆H₂ ( Ni5 )), have been prepared by the reaction of the corresponding ligand, L1 – L5 , with NiBr₂(DME) (DME = 1,2‐dimethoxyethane). On crystallization from bench dichloromethane, Ni1 underwent adventitious reaction with water to give the aqua salt, [ L1 NiBr(OH₂)₃][Br] ( Ni1' ). The molecular structures of Ni1' and Ni3 have been structurally characterized, the latter revealing a bromide‐bridged dimer. On activation with either MMAO or Et₂AlCl, Ni1 , Ni2 , Ni4, and Ni5 , all exhibited high activities for ethylene polymerization (up to 3.88 × 10⁶ g(PE) mol^?1(Ni) h^?1); the most sterically bulky Ni3 gave only low activity. Polyethylene waxes are a feature of the materials obtained which typically display low molecular weights (M _ws), narrow M _w distributions and unsaturated vinyl and vinylene functionalities. Notably, the catalyst comprising Ni1 /Et₂AlCl produced polyethylene with the lowest M _w, 0.67 kg mol^?1, which is less than any previously reported data for any class of cycloalkyl‐fused pyridine–nickel catalyst. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3494–3505     

Vinyl/Vinylene functionalized highly branched polyethylene waxes obtained using electronically controlled cyclohexyl‐fused pyridinylimine‐nickel precatalysts

A series of 8‐(2,6‐dibenzhydryl‐4‐R‐phenylimino)‐5,6,7‐trihydroquinoline ligands have been prepared in which the nature of 4‐R substitutions vary from electron withdrawing to electron donating. The treatment with NiCl₂.6H₂O or (DME)NiBr₂ afforded the corresponding complexes of nickel chloride (4‐R = Me Ni1 , Et Ni2 , ^tBu Ni3 , CHPh₂ Ni4 , Cl Ni5 , and F Ni6 ) and nickel bromide (4‐R = Me Ni7 , Et Ni8 , ^tBu Ni9 , CHPh₂ Ni10 , Cl Ni11 , and F Ni12 ). X‐ray diffraction study of complexes Ni3 , Ni6 , and Ni10 , revealed that Ni3.1/2H₂O and Ni6.H₂O adopted unsymmetrical and symmetrical chloride‐bridged dinuclear structures respectively, while Ni10.H₂O is found as mononuclear specie forming distorted‐square planer geometry. In the presence of either diethylaluminum chloride (Et₂AlCl) or modified methylaluminoxane (MMAO), all the nickel complexes ( Ni1–Ni12 ) displayed high activities (up to 1.91 × 10⁶ g(PE) mol (Ni)⁻¹h⁻¹. Highly branched polyethylene waxes with low molecular weights (M_w ≤ 2.6 kg/mol) and narrow molecular weights distributions (M_w/M_n ≤ 1.96) incorporated with vinylene and vinyl groups were obtained. The effects of 4‐R substitutions to the nickel chloride and bromide pre‐catalysts and reaction conditions on the catalytic performance and the properties of the resulting polyethylene were the subject of a detail investigation. The positive influences of using electron‐withdrawing 4‐R substitutions and bromides were observed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1269–1281     

Copolymerization of ethylene with 1,1‐disubstituted olefins catalyzed by ansa‐(fluorenyl)(cyclododecylamido)dimethyltitanium complexes

A series of titanium complexes with ansa‐(fluorenyl)(cyclododecylamido) ligands, Me₂Si(η³‐R)(N‐c‐C₁₂H₂₃)TiMe₂ [R = fluorenyl ( 5 ), 2,7‐^tBu₂fluorenyl ( 6 ), 3,6‐^tBu₂fluorenyl ( 7 )], was synthesized. The crystal structure of complex 6 revealed η³‐coordination of the fluorenyl moiety to the metal. Upon activation with trialkylaluminum‐free modified methylaluminoxane, complexes 5 – 7 as well as the corresponding ^tBu amide complexes, Me₂Si(η³‐R)(N^tBu)TiMe₂ [R = fluorenyl ( 2 ), 2,7‐^tBu₂fluorenyl ( 3 ), 3,6‐^tBu₂fluorenyl ( 4 )], were adopted as the catalysts for the copolymerization of ethylene (E) and isobutylene (IB). Among these complexes, complex 6 was found to achieve the highest IB incorporation to produce alternating E‐IB copolymers. Complex 6 system also achieved copolymerization of E and limonene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007     

Dichlorovanadium (IV) complexes with salen‐type ligands for ethylene polymerization

Vanadium complexes with tetradentate salen‐type ligands were first time explored in ethylene polymerizations. The effects of the vanadium complex structure, the alkyl aluminum cocatalysts type (EtAlCl₂, Et₂AlCl, Et₃Al, and MAO), and the polymerization conditions (Al/V molar ratio, temperature) on polyethylene yield were explored. It was found that EtAlCl₂ in conjunction with investigated vanadium complexes produced the most efficient catalytic systems. It was shown, moreover, that the structural changes of the tetradentate salen ligand (type of bridge which bond donor nitrogen atoms and type of substituent on aryl rings) affected activity of the catalytic system. The complexes containing ligands with cyclohexylene bridges were more active than those with ethylene bridges. Furthermore, the presence of electron‐withdrawing groups at the para position and electron‐donating substituents at the ortho position on the aryl rings of the ligands resulted in improved activity in relation to the systems with no substituents (with the exception of bulky t‐Bu group). The results presented also revealed that all vanadium complexes activated by common organoaluminum compounds gave linear polyethylenes with high melting points (134.8–137.6 °C), high molecular weights, and broad molecular weight distribution. The polymer produced in the presence of MAO possesses clearly lower melting point (131.4 °C) and some side groups (around 9/1000 C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6940–6949, 2008     

Novel vanadium(III) complexes with tridentate phenoxy‐phosphine [O,P(O),O] ligands: Synthesis,characterization, and catalytic behavior of ethylene polymerization and copolymerization with 10‐undecen‐1‐ol

A series of novel vanadium(III) complexes bearing tridentate phenoxy‐phosphine [O,P,O] ligands and phosphine oxide‐bridged bisphenolato [O,P?O,O] ligands, which differ in the steric and electronic properties, have been synthesized and characterized. These complexes were characterized by Fourier transform infrared spectroscopy (FTIR) and mass spectra as well as elemental analysis. Single‐crystal X‐ray diffraction revealed that complexes 3c and 4e adopt an octahedral geometry around the vanadium center. In the presence of Et₂AlCl as a cocatalyst, these complexes displayed high catalytic activities up to 22.8 kg PE/mmol_V.h.bar for ethylene polymerization, and produced high‐molecular‐weight polymers. Introducing additional oxygen atom on phosphorus atom of [O,P,O] ligands has resulted in significant changes on the aspect of steric/electronic effect, which has an impact on polymerization performance. 3c and 4c /Et₂AlCl catalytic systems were tolerant to elevated temperature (70 °C) and yielded unimodal polyethylenes, indicating the single‐site behavior of these catalysts. By pretreating with equimolar amounts of alkylaluminums, functional α‐olefin 10‐undecen‐1‐ol can be efficiently incorporated into polyethylene chains. 10‐Undecen‐1‐ol incorporation can easily reach 14.6 mol % under the mild conditions. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, Al/V (molar ratio), and comonomer concentration, are also examined in detail. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of biocompatible and biodegradable block copolymers of polyvinyl alcohol‐block‐poly(ε‐caprolactone) using metal‐free living cationic polymerization

Applications of metal‐free living cationic polymerization of vinyl ethers using HCl · Et₂O are reported. Product of poly(vinyl ether)s possessing functional end groups such as hydroxyethyl groups with predicted molecular weights was used as a macroinitiator in activated monomer cationic polymerization of ε‐caprolactone (CL) with HCl · Et₂O as a ring‐opening polymerization. This combination method is a metal‐free polymerization using HCl · Et₂O. The formation of poly(isobutyl vinyl ether)‐b‐poly(ε‐caprolactone) (PIBVE‐b‐PCL) and poly(tert‐butyl vinyl ether)‐b‐poly(ε‐caprolactone) (PTBVE‐b‐PCL) from two vinyl ethers and CL was successful. Therefore, we synthesized novel amphiphilic, biocompatible, and biodegradable block copolymers comprised polyvinyl alcohol and PCL, namely PVA‐b‐PCL by transformation of acid hydrolysis of tert‐butoxy moiety of PTBVE in PTBVE‐b‐PCL. The synthesized copolymers showed well‐defined structure and narrow molecular weight distribution. The structure of resulting block copolymers was confirmed by ¹H NMR, size exclusion chromatography, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5169–5179, 2009     

Moderately branched ultra‐high molecular weight polyethylene by using N,N′‐nickel catalysts adorned with sterically hindered dibenzocycloheptyl groups

Five examples of unsymmetrical 1,2‐bis (arylimino) acenaphthene ( L1 – L5 ), each containing one N‐2,4‐bis (dibenzocycloheptyl)‐6‐methylphenyl group and one sterically and electronically variable N‐aryl group, have been used to prepare the N,N′‐nickel (II) halide complexes, [1‐[2,4‐{(C₁₅H₁₃}₂–6‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂ (X = Br: Ar = 2,6‐Me₂C₆H₃ Ni1 , 2,6‐Et₂C₆H₃ Ni2 , 2,6‐i‐Pr₂C₆H₃ Ni3 , 2,4,6‐Me₃C₆H₂ Ni4 , 2,6‐Et₂–4‐MeC₆H₂ Ni5 ) and (X = Cl: Ar = 2,6‐Me₂C₆H₃ Ni6 , 2,6‐Et₂C₆H₃ Ni7 , 2,6‐i‐Pr₂C₆H₃ Ni8 , 2,4,6‐Me₃C₆H₂ Ni9 , 2,6‐Et₂–4‐MeC₆H₂ Ni10 ), in high yield. The molecular structures Ni3 and Ni7 highlight the extensive steric protection imparted by the ortho‐dibenzocycloheptyl group and the distorted tetrahedral geometry conferred to the nickel center. On activation with either Et₂AlCl or MAO, Ni1 – Ni10 exhibited very high activities for ethylene polymerization with the least bulky Ni1 the most active (up to 1.06  ×  10⁷ g PE mol^?1(Ni) h^?1 with MAO). Notably, these sterically bulky catalysts have a propensity towards generating very high molecular weight polyethylene with moderate levels of branching and narrow dispersities with the most hindered Ni3 and Ni8 affording ultra‐high molecular weight material (up to 1.5  ×  10⁶ g mol^?1). Indeed, both the activity and molecular weights of the resulting polyethylene are among the highest to be reported for this class of unsymmetrical 1,2‐bis (imino)acenaphthene‐nickel catalyst.     

Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058     

Synthesis and characterization of Ni(II) complexes bearing of 2‐(1H–benzimidazol‐2‐yl)‐phenol derivatives as highly active catalysts for ethylene oligomerization

Novel Ni(II) complexes of 2‐(1H–benzimidazol‐2‐yl)‐phenol derivatives (HL_x: x  =  1–5; C1–C5 ) have been synthesized and characterized. In the mononuclear complexes, the ligands were coordinated as bidentate, via one imine nitrogen and the phenolate oxygen atoms. The structures of the compounds were confirmed on the basis of FT‐IR, UV–Vis, ¹H‐, ¹³C–NMR, inductively coupled plasma and elemental analyses (C, H and N). The purity of these compounds was ascertained by melting point (m.p.) and thin‐layer chromatography. The geometry optimization and vibrational frequency calculations of the compounds were performed using Gaussian 09 program with B3LYP/TZVP level of theory. All Ni(II) complexes were activated with diethylaluminum chloride (Et₂AlCl), so that C2 showed the highest activity [6600 kg mol^?1 (Ni) h^?1], where the ligand contains a chlorine substituent. Oligomers obtained from the complexes consist mainly of dimer and trimer, and also exhibit high selectivity for linear 1‐butene and 1‐hexene. Both the steric and electronic effects of coordinative ligands affect the catalytic activity and the properties of the catalytic products.     

Tailoring polymers through interplay of ligands within precatalysts: 8‐(Nitro/benzhydryl‐arylimino)‐7,7‐dimethyl‐5,6‐dihydroquinolylnickel halides in ethylene polymerization

A series of 8‐(nitro/benzhydryl‐substituted arylimino)‐7,7‐dimethyl‐5,6‐dihydroquinolines and the corresponding nickel halide complexes were synthesized and characterized. Molecular structures of representative nickel complexes were determined by single crystal X‐ray diffraction, showing the dinuclear dimers with distorted square‐pyramidal geometry around the nickel center. The binding energies determined by X‐ray photoelectron spectroscopy (XPS) indicate the effective coordination between the sp²‐nitrogen and nickel atoms as well as the influence of both the halogen ligands and the substituents within dihydroquinolines on the strength of the Ni? N bond. Ethylene polymerization with the nickel precatalysts in presence of either methylaluminoxane or diethylaluminum chloride was explored in detail. For the complexes containing the nitro substituent within the organic ligand, the catalytic activity is inversely proportional to the electron density around the nickel core determined by XPS; such phenomenon is consistent with the conclusion of the computational study stating that the activity of precatalysts is correlated with the net charge on the metal center. In the polymerization process, unimodal and branched polyethylenes containing vinyl or vinylene groups were obtained. The nickel precatalysts bearing bulky benzhydryl within the organic ligand as well as bromide rather than chloride attached to the nickel atom produce polymers with relatively large amount of vinylene groups. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2071–2083     

Efficient catalysts for ring‐opening polymerization of ε‐caprolactone and β‐butyrolactone: Synthesis and characterization of zinc complexes based on benzotriazole phenoxide ligands

A series of efficient zinc catalysts supported by sterically bulky benzotriazole phenoxide ( BTP ) ligands are synthesized and structurally characterized. The reactions of diethyl zinc (ZnEt₂) with ^CMe2PhBTP ‐H, ^t‐BuBTP ‐H, and ^TMClBTP ‐H yield monoadduct [(μ‐ BTP )ZnEt]₂ ( 1 – 3 ), respectively. Bisadduct complex [( ^t‐BuBTP )₂Zn] ( 4 ) results from treatment of ZnEt₂ with ^t‐BuBTP ‐H (2 equiv.) in toluene, but treatment of ^TMClBTP ‐H with ZnEt₂ in the same stoichiometric proportion in Et₂O produces five‐coordinated monomeric complex [( ^TMClBTP )₂Zn(Et₂O)] ( 5 ). The molecular structures of compounds 1 , 4 , and 5 are characterized by X‐ray crystal structure determinations. All complexes 1 – 5 are efficient catalysts for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) in the presence of 9‐anthracenemethanol. Experimental results indicate that complex 3 exhibits the greatest activity with well‐controlled character among these complexes. The polymerizations of ε‐CL and β‐butyrolactone catalyzed by 3 are demonstrated in a “living” character with narrow polydispersity indices (monomer‐to‐initiator ratio in the range of 25–200, PDIs ≤ 1.10). The “immortal” character of 3 provides a way to synthesize as much as 16‐fold polymer chains of poly(ε‐CL) (PCL) with narrow PDI in the presence of a catalyst in a small proportion. The controlled fashion of complex 3 also enabled preparation of the PCL‐b‐poly(3‐hydroxybutyrate) copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Highly branched and high‐molecular‐weight polyethylenes produced by 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC6H2N]‐2‐aryliminoacenaphthylnickel(II) halides

A series of unsymmetrical 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC₆H₂N]‐2‐aryliminoacenaphthene‐nickel(II) halides has been synthesized and fully characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (¹H NMR), ¹³C NMR, and ¹⁹F NMR spectroscopy as well as elemental analysis. The structures of Ni1 and Ni6 have been confirmed by the single‐crystal X‐ray diffraction. On activation with cocatalysts either ethylaluminum sesquichloride or methylaluminoxane, all the title nickel complexes display high activities toward ethylene polymerization up to 16.14 × 10⁶ g polyethylene (PE) mol^?1(Ni) h^?1 at 30 °C, affording PEs with both high branches (up to 103 branches/1000 carbons) and molecular weight (1.12 × 10⁶ g mol^?1) as well as narrow molecular weight distribution. High branching content of PE can be confirmed by high temperature ¹³C NMR spectroscopy and differential scanning calorimetry. In addition, the PE exhibited remarkable property of thermoplastic elastomers (TPEs) with high tensile strength (σ_b = 21.7 MPa) and elongation at break (ε_b = 937%) as well as elastic recovery (up to 85%), indicating a better alternative to commercial TPEs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 130–145     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010