Rhenium(V) and technetium(V) complexes with phosphoraneimine and phosphoraneiminato ligands

Air-stable rhenium(V) nitrido complexes are formed when [ReOCl3(PPh3)2], [NBu4][ReOCl4], or [NBu4][ReNCl4] are treated with an excess of silylated phosphoraneiminates of the composition Me3SiNPPh3 or Ph2P(NSiMe3)CH2PPh2 in CH2Cl2. Complexes of the compositions [ReNCl(Ph2PCH2PPh2NH)2]Cl (1), [ReN(OSiMe3)(Ph2PCH2PPh2NH)2]Cl (2) or [ReNCl2(PPh3)2] (3) were isolated and structurally characterized. The latter compound was also produced during a reaction of the rhenium(III) precursor [ReCl3(PPh3)2(CH3CN)] and Me3SiNPPh3. Nitrogen transfer from the phosphorus to the rhenium atoms and the formation of nitrido ligands were observed in all examples. All products of reactions with an excess of the potentially chelating phosphoraneiminate Me3SiNP(Ph2)CH2PPh2 contain neutral Ph2PCH2PPh2NH ligands. The required protons are supplied by a metal-induced decomposition of the solvent dichloromethane. The Re-N(imine) bond lengths (2.055-2.110 A) indicate single bonds, whereas the N-P bond with lengths between 1.596 A and 1.611 A reflect considerable double bond character. An oxorhenium(V) phosphoraneiminato complex, the dimeric compound [ReOCl2(mu-N-Ph2PCH2PPh2N)]2 (4), is formed during the reaction of [NBu4][ReOCl4] with an equivalent amount of Ph2P(NSiMe3)CH2PPh in dry acetonitrile. The blue neutral complex with two bridging phosphoraneiminato units is stable as a solid and in dry solvents. It decomposes in solution, when traces of water are present. The rhenium-nitrogen distances of 2.028(3) and 2.082(3) A are in the typical range of bridging phosphoraneiminates and an almost symmetric bonding mode. Technetium complexes with phosphoraneimine ligands were isolated from reactions of [NBu4][TcOCl4] with Me3SiNPPh3, and [NBu4][TcNCl4] with Me3SiNP(Ph2)CH2PPh2. Nitrogen transfer and the formation of a five-coordinate nitrido species, [TcNCl2(HNPPh3)2] (5), was observed in the case of the oxo precursor, whereas reduction of the technetium(VI) starting material and the formation of the neutral technetium(V) complex [TcNCl2(Ph2PCH2PPh2NH)] (6) or [TcNCl(Ph2PCH2PPh2NH)2]Cl (7) was observed in the latter case. Both technetium complexes are air stable and X-ray structure determinations show bonding modes of the phosphoraneimines similar to those in the rhenium complexes.     

Synthesis and structural characterization of new oxorhenium and oxotechnetium complexes with XN2S-tetradentate semi-rigid ligands (X = O, S, N)

Twelve novel oxo-technetium and oxo-rhenium complexes based on N2S2-, N2SO- or N3S-tetradentate semi-rigid ligands have been synthesised and studied herein. By reacting the ligands with a slight excess of suitable [MO]3+ precursor (ReOCl3(PPh3)2 or [NBu4][99gTcOCl4]), the monoanionic complexes of general formula [MO(Ph-XN2S)]- could be easily produced in high yield. The complexes have been characterized by means of IR, electrospray mass spectrometry, elemental analysis, NMR and conductimetry. The crystal structures of [PPh4][ReO(Ph-ON2S)] 1b and [NBu4][99gTcO(Ph-ON2S)] 1c have been established. The [MO]3+ moiety was coordinated via the two deprotonated amide nitrogens, the oxygen and the terminal sulfur atoms in 1b and 1c. In both compounds, the ON2S coordination set is in the equatorial plane, and the complexes adopted a distorted square-pyramidal geometry with an axial oxo-group. The chemical and structural identity of the different prototypic complexes (rhenium, 99gTc complexes and their corresponding 99mTc radiocomplexes) have been also established by a comparative HPLC study.     

Rhenium and technetium complexes with N,N-dialkyl-N'-benzoylthioureas

N,N-Dialkyl-N'-benzoylthioureas, HR(1)R(2)btu, react under single deprotonation and form air-stable chelate complexes with common rhenium or technetium complexes such as (NBu(4))[MOCl(4)] (M = Re, Tc) or [ReOCl(3)(PPh(3))(2)]. Compositions and molecular structures of the products are strongly dependent on the precursors used and the reaction conditions applied. Reactions with [ReOCl(3)(PPh(3))(2)] in CH(2)Cl(2) give complexes of the general formula [ReOCl(2)(R(1)R(2)btu)(PPh(3))] (3), with the benzoyl oxygen atom of the chelating benzoylthiourea being trans to the oxo ligand, and/or Re(III) complexes of the composition [ReCl(2)(R(1)R(2)btu)(PPh(3))(2)] (4) with the PPh(3) ligands in trans positions to each other. In polar solvents such as MeOH, EtOH or acetone, corresponding reactions without addition of a supporting base only result in intractable brown solutions, from which no crystalline complexes could be isolated. The addition of NEt(3), however, allows the isolation of the bis-chelates [ReOCl(R(1)R(2)btu)(2)] (1) in good yields. In this type of complex, one of the chelating R(1)R(2)btu- ligands coordinates equatorially, while the second occupies the position trans to the oxo ligand with its oxygen atom. The latter compounds can also be prepared from (NBu(4))[ReOCl(4)] in MeOH when no base is added, while the addition of NEt(3) results in the formation of [ReO(OMe)(R(1)R(2)btu)(2)] (5) complexes with the methoxo ligand trans to O(2-). Compounds of the type 5 can alternatively be prepared by heating 1 in MeOH with addition of NEt(3). A reversible conversion of 5 into oxo-bridged dimers of the composition [{ReO(R(1)R(1)btu)(2)}(2)O] (6) is observed in water-containing solvents. Starting from (NBu(4))[TcOCl(4)], a series of technetium complexes of the type [TcOCl(R(1)R(2)btu)(2)] (2) could be prepared. The structures of such compounds are similar to those of the rhenium analogues 1. Reduction of 2 with PPh(3) in CH(2)Cl(2) gives Tc(III) complexes of the composition [TcCl(R(1)R(2)btu)(2)(PPh(3))] (7) having the chloro and PPh(3) ligands in cis positions. When this reaction is performed in the presence of excess chelating ligand, the Tc(III) tris-chelates [Tc(R(1)R(2)btu)(3)] (8) are formed.     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

Rhenium(V) oxocomplexes with novel pyrazolyl-based N4- and N3S-donor chelators

The novel pyrazolyl-based ligands 3,5-Me2pz(CH2)2NH(CH2)2NH(CH2)2NH2 and pz*(CH2)2NH-Gly-CH2STrit (pz*=pz, 3,5-Me2pz, 4-(EtOOC)CH(2)-3,5-Me2pz) were synthesized, and their suitability to stabilize Re(V) oxocomplexes was evaluated using different starting materials, namely (NBu4)[ReOCl4], [ReOCl3(PPh3)2] and trans-[ReO2(py)4]Cl. Compound reacts with trans-[ReO2(py)4]Cl yielding the cationic compound [ReO(OMe){3,5-Me2pz(CH2)2N(CH2)2NH(CH2)2NH2}](BPh4) in a low isolated yield. In contrast, the neutral complexes [ReO{pz*(CH2)2NH-Gly-CH2S}] (pz*=pz, 3,5-Me2pz, 4-(EtOOCCH2)-3,5-Me2pz) were synthesized almost quantitatively by reacting [ReOCl3(PPh3)2] or (NBu4)[ReOCl4] with the trityl-protected chelators. The X-ray diffraction analysis of and confirmed the tetradentate coordination mode of the respective ancillary ligands. In the monoanionic chelator coordinates to the metal through four nitrogen atoms, while in the chelator is trianionic, coordinating to the metal through three nitrogens and one sulfur atom. Solution NMR studies of , including two-dimensional NMR techniques (1H COSY and 1H/13C HSQC), confirmed that the N3S coordination mode of the chelators is retained in solution. Unlike , complexes may be considered relevant in the development of radiopharmaceuticals, as further corroborated by the synthesis of the congener [99mTcO{pz(CH2)2-NH-Gly-CH2S}]. This radioactive compound was obtained from 99mTcO4- in aqueous medium, in almost quantitative yield and with high specific activity and radiochemical purity.     

Rhenium complexes with 2-(diphenylphosphinomethyl)aniline: formation of a cyclic, trinuclear oxorhenium(V) core

Reactions of 2-(diphenylphosphinomethyl)aniline, H(2)L(2), with (NBu(4))[ReOCl(4)] yield different oxo rhenium(V) complexes depending on the conditions applied. This comprises monomeric compounds such as [ReOCl(3)(H(2)L(2))] (1), [ReOCl(2)(OMe)(H(2)L(2))] (2), or [ReO(2)(H(2)L(2))(2)]Cl (5) as well as the dimeric μ-oxo complex [{ReOCl(2)(H(2)L(2))}(2)]O] (3) and the oxo-bridged trimer [{ReOCl(H(2)L(2))}O](3) (4). The latter compound represents the first example of a hitherto unknown trinuclear, cyclic oxo(V) core. [{ReOCl(H(2)L(2))}O](3) contains a tensed 6-membered metallacycle, which readily undergoes rearrangements and reactions with additional ligands. Compounds of the compositions 5 and [ReO(2)(H(2)L(2))(H(2)L(1))]Cl (6) were isolated either from the decomposition of 4 in CH(2)Cl(2)/n-pentane or from reactions with 2-(diphenylphosphino)aniline, H(2)L(1).     

Chemistry of re with N,N'-bis(2-pyridylmethyl)ethylenediamine (H2pmen): hydrolysis, dehydrogenation, and ternary complexes

A number of Re complexes with N,N'-bis(2-pyridylmethyl)ethylenediamine (H2pmen) have been made from [NH4][ReO4]. [ReOCl2(H2pmen)]Cl, [ReOCl(Hpmen)][ReO4], and [ReO2(H2pmen)][ReO4] are related by hydrolysis/HCl substitution. [ReOCl(Hpmen)][ReO4] was structurally characterized and found to contain a water-stable amido-Re bond. Dehydrogenation of the N-donor ligand from each amine to imine with concomitant two-electron reduction of the Re center occurs readily in these systems. With suitable 3-hydroxy-4-pyrones, ternary complexes such as [ReIIICl(ma)(C14H14N4)][ReO4].CH3OH, 5, were made from [NH4][ReO4], H2pmen.4HCl and pyrones in one-pot syntheses. 5, a seven-coordinate ReIII complex, was structurally characterized.     

Synthesis and characterization of mixed-ligand oxorhenium complexes with the SNN type of ligand. Isolation of a novel ReO[SN][S][S] complex

A new series of mixed-ligand oxorhenium complexes 4-9, with ligands 1-3 (L1H2) containing the SNN donor set and monodentate thiols as coligands (L2H), is reported. All complexes were synthesized using ReOCl3(PPh3)2 as precursor. They were isolated as crystalline products and characterized by elemental analysis and IR and NMR spectroscopy. The ligands 1 and 2 (general formula RCH2CH2NHCH2CH2SH, where R = N(C2H5)2 in 1 and pyrrolidin-1-yl in 2) act as tridentate SNN chelates to the ReO3+ core, leaving one open coordination site cis to the oxo group. The fourth coordination site is occupied by a monodentate aromatic thiol which acts as a coligand. Thus, three new "3 + 1" [SNN][S] oxorhenium complexes 4-6 (general formula ReO[RCH2CH2NCH2CH2S][SX], where R = N(C2H5)2 and X = phenyl in 4, R = N(C2H5)2 and X = p-methylphenyl in 5, and R = pyrrolidinlyl and X = p-methylphenyl in 6) were prepared in high yield. Complex 4 adopts an almost perfect square pyramidal geometry (tau = 0.07), while 6 forms a distorted square pyramidal geometry (tau = 0.24). In both complexes 4 and 6, the basal plane is formed by the SNN donor set of the tridentate ligand and the S of the monodentate thiol. On the other hand, the ligand 3, [(CH3)2CH]2NCH2CH2NHCH2CH2SH, acts as a bidentate ligand, probably due to steric hindrance, and it coordinates to the ReO3+ core through the SN atoms, leaving two open coordination sites cis to the oxo group. These two vacant positions are occupied by two molecules of the monodentate thiol coligand, producing a novel type of "2 + 1 + 1" [SN][S][S] oxorhenium mixed-ligand complexes 7-9 (general formula ReO[[(CH3)2CH]2NCH2CH2NHCH2CH2S][SX][SX], where X = phenyl in 7, p-methylphenyl in 8, and benzyl in 9). The coordination sphere about rhenium in 7 and 8 consists of the SN donor set of ligand 3, two sulfurs of the two monodentate thiols, and the doubly bonded oxygen atom in a trigonally distorted square pyramidal geometry (tau = 0.44 and 0.45 for 7 and 8, respectively). Detailed NMR assignments were determined for complexes 5 and 8.     

Rhenium and technetium complexes with tridentate N-[(N',N'-dialkylamino)(thiocarbonyl)]-N'-substituted benzamidine ligands

N-[(Dialkylamino)(thiocarbonyl)]benzimidoyl chlorides react with functionalized amines such as 2-aminophenol, 2-methylaminopyridine, and 2-aminobenzoic acid in clean and high-yield procedures with the formation of the novel tridentate N-[(N', N'-dialkylamino)(thiocarbonyl)]- N'-substituted benzamidine ligands H2L1, HL2, and H2L3. By starting from (NBu4)[MOCl4] (M = Re, Tc) or [ReOCl3(PPh3)2] and H2L1, a series of oxorhenium(V) and oxotechnetium(V) complexes of the composition [MOCl(L1)] were synthesized and characterized by spectroscopic methods and X-ray crystallography. The monomeric, five-coordinate compounds are air-stable and bind (L1)(2-) tridentate in the equatorial coordination sphere. Dimeric products of the compositions [(ReOCl(L2))2O] and [ReOCl(L3)]2 were isolated during reactions with HL2 and H2L3. While dimerization in [(ReOCl(L2))2O] is established via an oxo bridge, the metal atoms in [ReOCl(L3)]2 are connected by the carboxylic group of the ligand, and the product represents the first example of a high-oxidation state rhenium complex displaying such a bonding feature.     

Rhenium complexes with triazine derivatives formed from semicarbazones and thiosemicarbazones

Benzil bis(semicarbazone), H2L(1), reacts with common rhenium(V) nitrido complexes such as [ReNCl2(PPh3)2] or [ReNCl2(PR2Ph)3] (R = Me, Et) under the release of one semicarbazone unit, cyclization, and formation of stable triazine-3-onato complexes of rhenium(V). The resulting 5,6-diphenyltriazine-3-one, HL (2), acts as monodentate or chelating, monoanionic ligand depending on the reaction conditions applied. Complexes of the compositions [ReNCl(L(2)-kappaN(2),kappaO)(PR2Ph)2] (R = Me, Et) or [ReN(L(2)-kappa N(2),O)(L(2)-kappaN(2))(PPh3)2] were isolated. The N(2) nitrogen atom is the preferred binding site of the monodentate form of the ligand. This contrasts the behavior of the analogous thione HL(3), which preferably coordinates to nitridorhenium(V) centers via the sulfur atom. HL(3) is readily formed by the abstraction of methanol from 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]triazine-3-thione, H2L(3)OCH 3. In the presence of [ReNCl2(PPh3)2] or [ReNCl2(PR2Ph)3] complexes (R = Me, Et), this reaction yields stable complexes of the composition [ReN(L(3)-kappaN(2),kappaS)(L(3)-kappaS)(PR2Ph)2] (R = Me, Et, Ph) in good yields. Reduction of the metal atom and formation of the seven-coordinate [Re(PPh3)(L(3)-kappaN(2),kappaS)3] was observed during reactions of H2L(3)OCH3 with [ReOCl3(PPh3)2] or [ReO2I(PPh3)2], while no rhenium complexes could be isolated during similar reactions with H2L(1), although cyclization of the bis(semicarbazone) and the formation of H 2L(2)OEt were observed.     

Syntheses and structures of pyrazolylmethane complexes of rhenium(III), (IV) and (V)

Reaction of [ReOCl3(PPh3)(2)] with HCpz(3) (pz = pyrazole) in dichloromethane leads to the formation of a new Re(iv) complex [ReCl3(HCpz3)]X (X=Cl, [ReO4]) with loss of the rhenium-oxo group. We also report a convenient, high-yield synthetic route to complexes of the type [ReOXn(L)](3-n)+ (X=Cl, Br, n = 2, 3) by the reaction of bis(pyrazolylmethane) and bis(pyrazolylacetate) ligands with [ReOCl3(PPh3)2]. Dinuclear complexes containing the O=Re-O-Re=O group were also isolated and structurally characterised. We have also investigated the reactions of these ligands with diazenide precursors and isolated and characterised complexes of the type [ReClx(N2Ph) (L)(PPh3)] (x = 1,2). The potential applications of these complexes as radiopharmaeuticals is discussed.     

Mechanistic insight into olefin epoxidation catalyzed by rhenium(V) oxo complexes that contain pyridazine-based ligands

Three novel tridentate pyridazine phenolate ligands were prepared in high yields by Schiff-base condensation of salicylic aldehyde with various pyridazine hydrazines (substituent R in the 6 position: R = Cl (HL(Cl)), (t)Bu (HL((t)Bu)), or tol (HL(tol))). They react with [ReOCl(3)(OPPh(3))(SMe(2))] to form rare mononuclear trans-dichloro oxo complexes of general formula [ReOCl(2)(L(R))] with R = tol (1), (t)Bu (2), or Cl (3) as confirmed by single-crystal X-ray diffraction analyses of 1 and 2. They were found to be catalysts for oxidation of cyclooctene to the corresponding epoxide by tert-butyl hydroperoxide (TBHP). Extensive UV-vis and NMR spectroscopic investigations followed by evaluation using the powerful Mauser method revealed mechanistic details. This showed the catalyst precursor [ReOCl(2)(L)] (2) to be transformed into the rhenium(VII) compound [ReO(3)L] (4) in a two-step reaction via intermediate INT which is tentatively assigned to [ReO(2)L]. Confirmation gave the isolation of 4 by reaction of 2 with excess of TBHP. Monitoring the catalytic oxidation reaction by UV-vis spectroscopy clearly excludes the two rhenium(V) compounds 2 and INT from being the catalytically active species as their formation is several orders of magnitude faster than the observed catalytic epoxidation reaction.     

Rhenium complexes of tris(pyrazolyl)methanes and sulfonate derivative

The trioxo [ReO(3){SO(3)C(pz)(3)}] (1) (pz = pyrazolyl) and oxo [ReOCl{SO(3)C(pz)(3)}(PPh(3))]Cl (2) compounds with tris(pyrazolyl)methanesulfonate were obtained by treatment of Re(2)O(7) or [ReOCl(3)(PPh(3))(2)], respectively, with Li[SO(3)C(pz)(3)], whereas [ReCl(3){HC(pz)(3)}] (3), [ReCl(3){HC(3,5-Me(2)pz)(3)}] (4) and [ReCl(4){eta(2)-HC(pz)(3)}] (5) were prepared by reaction of [ReOCl(3)(PPh(3))(2)] (3,4) or [ReCl(4)(NCMe)(2)] (5) with hydrotris(pyrazolyl)methane HC(pz)(3) (3,5) or hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me(2)pz)(3) (4). [ReO{SO(3)C(pz)(3)}{OC(CH(3))(2)pz}][ReO(4)] 6, with a chelated pyrazolyl-alkoxide, was derived from an unprecedented ketone-pyrazolyl coupling on reaction of crude 1 with acetone. The compounds have been characterized by elemental analyses, IR and NMR spectroscopies, FAB-MS spectrometry and cyclic voltammetry and, in the case of 5 and 6, also by single-crystal X-ray diffraction. The electrochemical E(L) Lever parameter has been estimated, for the first time, for the SO(3)C(pz)(3)(-) and oxo ligands allowing the measurement of their electron-donor character and comparison with other ligands. Compounds 1, 2 and 6 appear to be the first tris(pyrazolyl)methanesulfonate complexes of rhenium to be reported.     

Triazenide-bridged rhodium-palladium complexes: [I2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)]-, a stable paramagnetic [RhPd]4+ species with a localised Rh(II) centre

Deprotonation of mixtures of the triazene complexes [RhCl(CO)2(p-MeC6H4NNNHC6H4Me-p)] and [PdCl(eta(3)-C3H5)(p-MeC6H4NNNHC6H4Me-p)] or [PdCl2(PPh3)(p-MeC6H4NNNHC6H4Me-p)] with NEt3 gives the structurally characterised heterobinuclear triazenide-bridged species [(OC)2Rh(mu-p-MeC6H4NNNC6H4Me-p)2PdLL'] {LL' = eta(3)-C3H5 1 or Cl(PPh3) 2} which, in the presence of Me3NO, react with [NBu(n)4]I, [NBu(n)4]Br, [PPN]Cl or [NBu(n)4]NCS to give [(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2PdCl(PPh3)]- (X = I 3-, Br 4-, Cl 5- or NCS 6-) and [NBu(n)4][(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 7- or Br 8-). The allyl complexes 7- and 8- undergo one-electron oxidation to the corresponding unstable neutral complexes 7 and 8 but, in the presence of the appropriate halide, oxidative substitution results in the stable paramagnetic complexes [NBu(n)4][X2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 9- or Br 10-). X-Ray structural (9-), DFT and EPR spectroscopic studies are consistent with the unpaired electron of 9- and 10- localised primarily on the Rh(II) centre of the [RhPd]4+ core, which is susceptible to oxygen coordination at low temperature to give Rh(III)-bound superoxide.     

A series of [3 + 2] cycloaddition products from the reaction of rhenium oxo complexes with diphenyl ketene

The reaction of rhenium (VII) trioxo complexes containing the ligand sets scorpionate, [HB(pz)3]ReO3 (6), [Ph-B(pz)3]ReO3 (7), and [[HC(pz)3]ReO3][ReO4] (8) and pyridine/pyridine-type ligands [(4,7-diphenyl-1,10-phen)(Br)ReO3] (12), [(4,4'-di-tert-butyl-2,2'-dipyridyl)(Cl)ReO3] (13), and [(py)2Re(Cl)O3] (4), with diphenyl ketene, has led to the isolation of six novel [3 + 2] cycloaddition products. These air-stable solids 9-11 and 15-17 are the result of [3 + 2] addition of the O=Re=O motif across the ketene C=C double bond. Five of the six [3 + 2] cycloaddition products have been structurally characterized by single-crystal X-ray diffraction and in all cases by 13C NMR and IR spectroscopies.     

Tetranuclear platinum phosphido complexes with different structures

The addition of [NBu4]Br or [NBu4][BH4] to solutions of [Pt4(mu-PPh2)4(C6F5)4(CO)2] yields the complexes [NBu4]2[Pt4(mu-PPh2)4(mu-X)2(C6F5)4] (X=Br, H,) in which the two CO groups have been replaced by two anionic, bridging X ligands. The total valence electron counts are 64 and 60, respectively; thus, complex does not require Pt-Pt bonds, while two metal-metal bonds are present in, as their NMR spectra confirm. Also, the NMR spectra indicate a nonsymmetrical "Pt(mu-PPh2)2Pt(mu-PPh2)(mu-X)Pt(mu-PPh2)(mu-X)Pt" disposition for and. Treatment of with HX (X=Cl, Br) yields the complexes [NBu4]2[Pt4(mu-PPh2)4(mu-H)2(C6F5)3X] (X=Cl, Br,). These complexes react with [Ag(OClO 3)PPh3] with displacement of the halide and formation of [NBu4][Pt4(mu-PPh2)4(mu-H)2(C6F5)3PPh3]. Complexes maintain the same basic skeleton as, with two Pt-Pt bonds. Complex is, however, an isomer of the symmetric [NBu4]2[{(C6F5)2Pt(mu-PPh2)2Pt(mu-Br)}2], which has been prepared by a metathetical process from the well-known [NBu4]2[{(C6F5)2Pt(mu-PPh2)2Pt(mu-Cl)}2]. The comparison of the X-ray structures of and confirms the different disposition of the bridging ligands, and their main structural differences seem to be related to the size of Br- and its position in the skeleton.     

Synthesis and characterization of novel 99gTc(V) and Re(V) complexes with water-soluble tetraaza diamido dipyridino ligands: single-crystal X-ray structural investigations of mono- and dinuclear complexes

Rhenium and technetium are known for their useful applications in nuclear medicine with similar properties. In this study, new diamido dipyridino (N(4)) water-soluble ligands (2-C(5)H(4)NCH(2)NHCO)(2)CH(2), 1 (L(1)H2), (2-C(5)H(4)NNHNHCO)(2)CH(2), 2, and [2-C(5)H(4)N(+)(O)(-)CH(2)NHCO](2)CH(2), 3, were synthesized. Reaction of L(1)H2 with ReOCl(3)(PPh(3))(2) resulted in the novel six-coordinated rhenium(V) complex, trans-ReO(L(1))(OEt), 4. The complex was characterized by spectroscopic methods, and its X-ray crystallographic analysis revealed that rhenium is coordinated to four nitrogen atoms of the ligand and to two oxygen atoms from the deprotonated ethanol and the oxo group respectively in a distorted octahedral geometry. In solution, complex 4 was transformed to a new complex 5, which was proved to be the dinuclear complex mu-oxo [ReO(L(1))](2)O. Reaction of 1 with [n-Bu(4)N][ReOCl(4)] resulted in the neutral complex 6, trans-[ReO(L(1))]Cl. Similarly, when ligand 1 was reacted with [n-Bu(4)N][(99g)TcOCl(4)], the neutral trans-[(99)TcO(L(1))]Cl complex 7 was formed, which upon dissolution transformed into a cationic complex 8, trans-[(99)TcO(L(1))(OH(2))](+)Cl(-). The single-crystal X-ray structure of 8 reveals that the coordination sphere about technetium is a distorted octahedron with four nitrogen atoms in the equitorial plane, while doubly bonded oxygen and coordinated water occupy the apical positions. Further dissolution of 8 resulted in the formation of dinuclear mu-oxo [TcO(L(1))](2)O, 9. This study shows that Tc and Re have similar metal core structures in solution for diamido dipyridino systems, besides similarity in geometrical structure, proved by the X-ray structures on the same ligands.     

Rhenium oxohalides: synthesis and crystal structures of ReO3Cl(THF)2, ReOCl4(THF), Re2O3Cl6(THF)2, and Re2O3Cl6(H2O)2

Convenient methods to prepare solvated rhenium oxochlorides are described; these compounds should serve as useful starting materials for rhenium chemistry. Treatment of perrhenic acid, HReO(4), with chlorotrimethylsilane or with thionyl chloride, followed by addition of tetrahydrofuran, forms the new oxochloride complexes ReO(3)Cl(THF)(2) and ReOCl(4)(THF), respectively. Small amounts of two dinuclear oxochlorides, which evidently resulted from adventitious hydrolysis, were also isolated: Re(2)O(3)Cl(6)L(2), where L = THF or H(2)O. All four compounds were characterized by X-ray crystallography. The rhenium(vii) complex ReO(3)Cl(THF)(2) adopts a distorted octahedral geometry in which the three oxo ligands are in a facial arrangement; the rhenium(vi) complex ReOCl(4)(THF) adopts a trans octahedral structure. The two dinuclear rhenium(vi) compounds both have a single, nearly linear, bridging oxo group; on each Re center, the three terminal chlorides adopt a mer arrangement, and the terminal oxo and the coordinated Lewis base are mutually trans. The water ligand in the aqua complex is hydrogen bonded to nearby THF molecules. IR data are given.     

Synthesis and characterization of novel "3 + 2" oxorhenium complexes, ReO[SNO][NN

The present paper deals with the synthesis and structural characterization of novel neutral oxorhenium(V) complexes of the general formula ReO[SNO][NN]. The simultaneous action of the tridentate SNO ligand, N-(2-mercaptoacetyl)glycine (1), and the bidentate NN ligand, N-phenylpyridine-2-aldimine (2), on ReOCl3(PPh3)2 leads to the formation of two isomers 4a and 4b of the general formula ReO[SNO][NN], as a result of the different orientations of the NN ligand. In both cases, the SNO donor atoms of the tridentate ligand occupy the three positions in the equatorial plane of the distorted octahedron, whereas the oxo group is always directed toward one of the apical positions. In the first isomer, 4a, the imino nitrogen of the NN ligand occupies the fourth equatorial position and the pyridine type nitrogen is directed trans to the oxo group, while in the second isomer, 4b, the imino nitrogen of the NN ligand occupies the apical position trans to the oxo group and the pyridine type nitrogen completes the equatorial plane of the distorted octahedron. The [SNO][NN] mixed-ligand system was applied in the synthesis of the oxorhenium complex 5 in which the 1-(2-methoxyphenyl)piperazine moiety, a fragment of the true 5-HT1A antagonist WAY 100635, has been incorporated in the NN bidentate ligand (NN is N-{3-[4-(2-methoxyphenyl)piperazin-1-yl]propyl}pyridine-2-aldimine). In this case, high-performance liquid chromatography and NMR showed the existence of one isomer, 5, in which the pyridine nitrogen is trans to the oxo core, as demonstrated by crystal structure analysis.     

Calix[4]arene rhenium(V) complexes as potential radiopharmaceuticals

The calix[4]arene platform was used for the syntheses of novel rhenium(V) complexes, that may have potential applications as radiopharmaceuticals. The reaction of ReO(PPh3)2Cl3 with tetradentate N2O2-calix[4]arene ligand 8 in ethanol gave the novel mixed-ligand rhenium complex 9 with the structure ReO(N2O2-calix)OEt. The configuration was elucidated by using a number of 1H NMR techniques. In 9, the ethoxy ligand could be easily and quantitatively exchanged for another monodentate ligand to give complex 12. Tetradentate N2S2-calix[4]arene ligand 15 formed the rhenium complex 16 either via reaction with ReO(PPh3)2Cl3 in an organic solvent or by reaction with rhenium gluconate in an aqueous solution. Complex 16 showed good stability in phosphate-buffered saline solution (37 degrees C, 5 d). The crystal structures of a mono- and a bimetallic complex were determined. The bimetallic N2O2-calixarene complex dimer 11 crystallized in the monoclinic space group C2/c, with a = 38.963(5) A, b = 23.140(6) A, c = 27.382(6) A, beta = 128.456(10) degrees, V = 19,333(7) A3, Z = 8, and final R = 0.0519. The monometallic N2S2 model complex 17 crystallized in the monoclinic space group Cc, with a = 15.715(2) A, b = 12.045(2) A, c = 20.022(3) A, beta = 94.863(12) degrees, V = 3776.3(10) A3, Z = 4, and final R = 0.0342.