Friedel-Crafts Polymers. 6. Friedel-Crafts Polycondensation of p-Xylylerte Dibromide with Salicylic Acid and β-Resorcyiic Acid

Polymers were prepared by condensing p-xylylene dibromide separately with salicylic acid and β-resorcylic acid in the presence of anhydrous ferric chloride in dioxane. The polymer samples_were characterized by elemental analysis, by IR spectral study, by M determined by vapor pressure osmometry, by nonaqueous conducto-metric titration in pyridine, by TGA in air, and by viscosity measurements of polymer solutions in DMF. Polymeric metal chelates of Cu²⁺, Co²⁺, Zn²⁺, Ni²⁺, and Fe³⁺ with polymer samples were prepared and characterized by elemental analysis, by IR spectral study, and by TGA in air. The chelation ion-exchange properties of the polymer samples were studied by employing the batch equilibration method.     

Comparative determination of uranium in rock phosphates and columbite by ICP-OES,alpha &; gamma spectrometry

During this work selective separation of uranium from rock phosphate and columbite mineral was done before its quantitative estimation by using Inductively Coupled Plasma Optical Emission Spectrometery (ICP-OES). Uranium from the rock phosphate and columubite was extracted by sodium peroxide fusion followed by leaching in 2 M HNO₃. To avoid spectral interference in the estimation of uranium by ICP-OES, the selective separation of uranium from the leachate was carried out by using two different extractants, 30% Tributyl Phophates (TBP) in CCl₄ and a equi-volume mixture of Di(2-ethylhexyl) phosphoric acid (D2EHPA) & TBP in petrofin. Uranium was stripped from the organic phase by using 1 M ammonium carbonate solution. Determination of uranium by ICP-OES was done after dissolving the residue left after evaporation of ammonium carbonate solution in 4% HNO₃. The concentration of the uranium observed in the rock phosphates samples was 40–200 μg g⁻¹ whereas in columbite samples the concentration range was 100–600 μg g⁻¹. Uranium concentration evaluated by ICP-OES was complimented by gamma & alpha spectrometry. Concentration of uranium evaluated by gamma spectrometry in case of rock phosphate and coulmbite was in close agreement with the uranium content obtained by ICP-OES. Uranium determination by alpha spectrometry showed only minor deviation (1–2%) from the results obtained by ICP-OES in case of rock phosphates whereas in case of coulmbites results are off by 20–30%.     

Organo-modified mesoporous silica for sorption of carbon dioxide

Abstract  

Organo-modified mesoporous silica SBA-15 has been studied for sorption of carbon dioxide (CO₂). The SBA-15 sample was functionalized with a branched chain polymer, polyethylenimine (PEI), of different molecular weights (1,300 and 2,000 g mol⁻¹). Surface modification was carried out by impregnation of silica by PEI or by grafting with (3-chloropropyl)triethoxysilane, followed by substitution of chlorine atoms by PEI ligands. The prepared modified mesoporous materials were characterized by nitrogen adsorption/desorption at 77 K, high-resolution transmission electron microscopy, small-angle X-ray scattering, and thermal methods. Sorption of CO₂ was studied by gravimetric method at 303 K. The total amount of sorbed CO₂ varied between 0.19–0.67 mmol/g for respective samples. Regeneration of the materials after adsorption was achieved by thermal treatment at 343 K.     

Friedel-Crafts Polymers. 5. Friedel-Crafts Polycondensation of p-Xylylene Dichloride with Salicylaldehyde and o-Hydroxyacetophenone

Polymers were prepared by condensing p-xylylene dichloride (PXDC) separately with salicylaldehyde (SAL) and o-hydroxy-acetophenone (OHAC) in the presence of anhydrous ferric chloride in dioxane. The polymer samples were characterized by elemental analysis, measurement of their M by vapor pressure osmometry, by nonaqueous conductometric titration in pyridine, by IR spectral study, by TGA in air, and by viscometric study in DMF. The ion-exchange capacities of these polymeric ligands for selected metal ions were measured by the batch equilibration method and compared. Polymeric metal chelates of PXDC-SAL and PXDC-OHAC polymer samples with Cu^{2 +}, Ni²⁺, Co²⁺, Fe³ and Zn^{2 +} were prepared and characterized by elemental analyses, by IR spectral study, and by thermal analyses.     

Kinetics of thermoelectric signals under nanosecond laser heating of mercury in aqueous electrolyte solutions

Acetaldehyde oxidation to form acetic acid is enhanced by oxygen adsorbing ad-atoms to a great extent. At the same time, the oxidation is enhanced by the S_hole control by Bi, Te, Se and S ad-atoms, which do not adsorb oxygen. The number of unoccupied Pt sites isolated by these inactive ad-atoms (S_hole), which is available for reactions, is less than that required for the formation of poisoning species but equal to that required for the oxidation, resulting in the inhibition of the poison formation reaction and the enhancement of the oxidation. The same type of enhancement, that is, the enhancement both by the S_hole control by ad-atoms and by oxygen adsorbing ad-atoms, was previously found in the enhancement of formaldehyde oxidation by ad-atoms.     

Consecutive captures of electrons and positrons in the positron spur by HgCl2 and halide detachment in polar solvents

In polar solvents (water, methanol and DMSO), HgCl₂ inhibits positronium formation by quasi-free electron scavenging. In methanol, this inhibition possibly leads to fast detachment of Cl^- followed by positron capture to form a bound-state, [Cl^-e⁺]. In the other solvents, the positron appears to react with the newly formed radical anion, HgCl^-₂, before Cl^- detachment can occur. The sequence of electron scavenging by HgCl₂ followed by positron capture by the newly formed anion is confirmed by examining the effect of adding competing electron scavengers to the solutions.     

Extracellular oxidation of D-glucose by some members of the Enterobacteriaceae

Extracellular D-glucose oxidation by 5 enterobacterial species was studied with the purpose of selecting conditions useful for taxonomic studies. Extracellular production of gluconate from ¹⁴C-glucose by bacterial cells was evidenced by DEAE-cellulose paper chromatography. Escherichia coli oxidized glucose only when pyrroloquinoline quinone (PQQ) was added, whereas Serratia marcescens, Yersinia frederiksenii, Erwinia cypripedii and Cedecea lapagei oxidized D-glucose without added PQQ. 2-Deoxyglucose was found to be an excellent non-metabolized analogue of D-glucose in oxidation experiments. D-glucose oxidation was inhibited by KCN, p-chloromercuribenzoic acid and carbonyl cyanide m-chlorophenylhydrazone; and activated by p-benzoquinone. Iodoacetate had no action. Comparative cellulose thin-layer chromatography including 2-ketogluconate and 2,5-diketogluconate (produced by Janthinobacterium lividum) as standards, showed that gluconate was oxidized to 2-ketogluconate by S. marcescens and E. cypripedii, and 2-ketogluconate was oxidized to 2,5-diketogluconate by E. cypripedii. The diversity of D-glucose oxidation products in the Enterobacteriaceae could have some taxonomic applications.     

Probing the Interaction of the Hydroxy Group at C(4) of Lactone‐Type Inhibitors with β‐Glucosidases and β‐Galactosidases

The inhibition of the β‐glucosidases from sweet almonds and from Caldocellum saccharolyticum by the 4‐amino‐4‐deoxy lactam 11 , the 4‐deoxy lactam 12 , and the corresponding imidazoles 13 and 14 was compared to the inhibition by the hydroxy analogues 1 and 3 . Substitution of the OH group at C(4) by an amino group or by hydrogen weakened the inhibition by ΔΔG_diss = + 1.9 to + 3.1 kcal/mol. Similarly, the inhibition of the β‐galactosidase from bovine liver and from E. coli by the 4‐deoxy lactam 12 and the imidazole 14 , as compared to the one by the galacto‐configured lactam 9 and imidazole 10 , is weakened by deoxygenation at C(4) (ΔΔG_diss = + 2.6 and 4.5 kcal/mol, resp.). The effect of these substitutions on the inhibition of the C. saccharolyticum β‐glucosidase is slightly stronger than the one on the sweet almonds β‐glucosidases. The effect is also stronger on the inhibition by the imidazoles than by the lactams, and depends on the flexibility of the inhibitors. The amino and deoxy lactams 11 and 12 were prepared from the galactonolactam‐derived triflate 17 by substitution with azide and hydride, respectively, followed by hydrogenation. Azidation of the galacto‐configured imidazopyridine‐derived triflate 24 and hydrogenation gave the amino‐imidazole 13 . The deoxy lactam 20 was transformed to the manno‐ and gluco‐configured deoxy‐imidazoles 29 and 30 via the thionolactam 28 . Hydrogenolytic deprotection of 30 gave the deoxy‐imidazole 14 .     

Determination of the viscometric constants for chitosan and the application of universal calibration procedure in its gel permeation chromatography

The viscometric constantsa andK in the Mark-Houwink equation were determined in 0.5 M acetic acid-0.5 M.sodium acetate solution for chitosan fractionated by gel filtration. The weight-average molecular weight of each fraction was measured by the light-scattering method. The values obtained area=0.59 andK=0.119 cm³ g^–1.The molecular weightsMw andMn for fractionated chitosan were measured by GPC. The value ofMw by GPC was much different from that by light scattering and, therefore, a universal calibration procedure was applied to the data by GPC. It was concluded that, also in the case of a cationic polysaccharide such as chitosan, the universal calibration procedure is effective for obtaining the reliable molecular weight by GPC.     

The structure of granticin and of granticin B. The crystal structure of tri-O-acetyl-O-iodoacetyl-granaticins

The crystal structure of tri-O-acetyl-O-iodoacetyl-granaticin has been determined by X-ray analysis of threedimensional diffractometer intensity data. The crystals are orthorhombic, a = 17.85, b = 14.90, c = 11.26 Å, Z = 4, space group P2₁2₁2₁. The molecular structure was established by the heavy atom method and refined by full-matrix least-squares analysis. The molecular constitution and configuration is given by formula II. The chirality was determined by the use of anomalous dispersion effects.     

Characterisation of antibodies to chloramphenicol, produced in different species by enzyme-linked immunosorbent assay and biosensor technologies

Six polyclonal antisera to chloramphenicol (CAP) were successfully raised in camels, donkeys and goats. As a comparison of sensitivity, IC₅₀ values ranged from 0.3 ng mL⁻¹ to 5.5 ng mL⁻¹ by enzyme-linked immunosorbent assay (ELISA) and from 0.7 ng mL⁻¹ to 1.7 ng mL⁻¹ by biosensor assay. The introduction of bovine milk extract improved the sensitivity of four of the antisera by ELISA and two by biosensor assay; a reduction in sensitivity of the remaining antisera ranged by a factor of 1.1-2.6. Porcine kidney extract reduced the sensitivity of all the antisera by a factor ranging from 1.1 to 7 by ELISA and a factor of 1.5 to 4 by biosensor. A low cross-reactivity with thiamphenicol (TAP) and florfenicol (FF) was displayed by antiserum G2 (1.2% and 18%, respectively) when a homologous ELISA assay format was employed. No cross-reactivity was displayed by any of the antisera when a homologous biosensor assay format was employed. Switching to a heterologous ELISA format prompted three of the antisera to display more significant cross-reactivity with TAP and FF (53% and 82%, respectively, using D1). The heterologous biosensor assay also increased the cross-reactivity of D1 for TAP and FF (56% and 129%, respectively) and of one other antiserum (G1) to a lesser degree. However, unlike the ELISA, the heterologous biosensor assay produced a substantial reduction in sensitivity (by a factor of 6 for D1).     

Synthesis of new 2,5-dimethyl pyrrole derivatives from acetonylacetone

<正>Acetonylacetone 1 was treated with thiourea,aniline,glycine and glutamic acid to give pyrrole derivatives 2,3,5,and 9 by Paal-Knorr reaction,respectively.Then 3 was successfully transformed into the related pyrrole derivative 4 by Mannich reaction. Compounds 6,7 and 8 were obtained by reacting 5 with phenethyl alcohol,phenylallylic alcohol and leaf alcohol by esterification reactions,respectively.The structures of all new products were elucidated by IR,NMR and HRMS spectra.     

Synthesis,spectral, thermal,and flammability studies of phenolphthalein polyphosphate esters

Polyphosphate esters were synthesized from phenolphthalein and aryl phosphorodichloridates by interfacial polycondensation using a phase transfer catalyst. The polymers were characterized by IR, ¹H-, ¹³C-, and ³¹P-NMR spectroscopy. The molecular weights were calculated by end group analysis using ³¹P-NMR spectral data. The thermal stability of the polymers was studied by thermogravimetry and the flammability was investigated by measuring limiting oxygen index values.     

Radiolysis study of actinide complexing agent by irradiation with helium ion beam

α-Radiolysis of N,N,N′,N′-tetraoctyldiglycolamide (TODGA) in n-dodecane was investigated by the irradiation with helium ion beam provided by a tandem accelerator. The radiation chemical yield for the degradation of TODGA by helium ion beam irradiation was less than that by γ-rays irradiation. It is considered that the radical cations of n-dodecane, which contribute to the charge transfer reaction with the TODGA molecules, decrease by recombination in track by high LET radiations such as α-particles.     

Bicyclische Iodtetrachalcogenatriphosphaheptane

Bicyclic Iodo-tetrachalcogena-triphospha-heptanes The compounds P₃Se_4–nS_nI (n = 0, 1, 2) have been identified by ³¹P nmr spectroscopy. They were prepared by a direct thermal reaction of red phosphorus, sulfur, selenium and iodine in the stoichiometric ratio. These iodides could be converted into corresponding bromides and chlorides by substitution reactions. All molecules show a diselenium bridge in which, in contrast to the other selenium positions, selenium could not be replaced by sulfur. Similar effects were observed for the diselenium bridges of P₂Se₅. Systematic changes of the chemical shifts and coupling constants are caused by alterations in the molecular geometry, either by replacement of selenium by sulfur, or of iodine by more electronegative ligands. An intramolecular exchange reaction is observed for all molecules.     

Decomposition of persistent pharmaceuticals in wastewater by ionizing radiation

Pharmaceuticals in wastewater were treated by the combined method of activated sludge and ionizing radiation in laboratory scale. Oseltamivir, aspirin, and ibuprofen at 5 μmol dm^?3 in wastewater were decomposed by the activated sludge at reaction time for 4 h. Carbamazepine, ketoprofen, mefenamic acid, clofibric acid, and diclofenac were not biodegraded completely, but were eliminated by γ-ray irradiation at 2 kGy. The rate constants of the reactions of these pharmaceuticals with hydroxyl radicals were estimated by the competition reaction method to be 4.0–10×10⁹ mol^?1 dm³ s^?1. Decompositions of the pharmaceuticals in wastewater by ionizing radiation were simulated by use of the rate constants and the amount of total organic carbon as parameters. Simulation curves of concentrations of these pharmaceuticals as a function of dose described the experimental data, and the required dose for the elimination of them in wastewater by ionizing radiation can be estimated by this simulation.     

Analysis of hydroxyl radical‐induced oxidation process of glucagon by reversed‐phase HPLC and ESI‐MS/MS

Structural modification of a polypeptide hormone, glucagon, by a hydroxyl radical in vitro was investigated by reversed‐phase high‐performance liquid chromatography (RP‐HPLC), and the oxidized site of glucagon was detected by electrospray ionization tandem mass spectrometry (ESI‐MS/MS). It was shown that ²⁷methionine (Met) was oxidized to ²⁷Met sulfoxide by hydroxyl radical, and the production rate of ²⁷Met sulfoxide was faster than that by hydrogen peroxide. In addition, production of ²⁷Met sulfoxide enantiomer was confirmed by RP‐HPLC analysis. cAMP production in a HepG2 cell induced by ²⁷Met sulfoxide glucagon was reduced to approximately 75% as compared with that induced by the native form of glucagon. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthese und Eigenschaften von 1,1,3,3-Tetrakis(pentafluorphenyl)-cyclo-di(silthian) und verwandten Verbindungen

Summary The synthesis of tetrakis(pentafluorophenyl)-cyclo-di(silthiane) and related compounds by reacting organosubstituted silanes with sulfur or hexamethyldisilthiane is reported The compounds are characterized by analysis, by relative molecular mass, by¹H,¹³C,¹⁹F, and²⁹Si NMR spectroscopy, and by mass and IR spectra, respectively. Two²⁹Si NMR signals of different intensity found for compounds with two different organic substituents on silicon are explained by the existence of diastereomers.

     

The determination of radium-226 and radium-228 in soils and plants,using radium-225 as a yield tracer

Recovery of²²⁶Ra in analysis is determined using²²⁵Ra separated by anion exchange from²²⁹Th and²³³U. Radium is coprecipitated with barium, and purified by ion exchange.²²⁶Ra and²¹⁷At (decay product of²²⁵Ra) are measured by α-spectrometry.²²⁸Ra is determined both by β-counting²²⁸Ac and²²⁵Ac separated from²²⁸Ra and²²⁵Ra, and by α-counting its daughters after the decay of²²⁵Ra. Sources for α-spectrometry are prepared by electrodeposition (molecular plating).     

Synthesis and characterization of chitosan-based polyurethane elastomer dispersions

Abstract  

A number of aqueous polyurethane dispersions were synthesized by the reaction of poly(ε-caprolactone) and isophorone diisocyanate, extended with different mass ratios of chitosan and dimethylol propionic acid. Their chemical structures were characterized by using FTIR, ¹H NMR, and ¹³C NMR spectroscopy, and thermal properties were determined by TGA. Incorporation of chitosan into the polyurethane backbone improved thermal stability. The hydrophilicity of the prepared polymers was also examined by contact angle measurements. For all samples, the contact angles increased by increasing the amount of chitosan. The increased contact angle is ascribed to the decrease of the hydrophilicity of the polyurethanes, which is reduced by the increasing amount of chitosan with respect to dimethylol propionic acid chain extender.