Organic syntheses by means of metal complexes—XI : Copper complex catalyzed addition reactions of organic polyhalides to acrylic monomers

Telomerization, especially 1:2 adduct formation from organic polyhalides and acrylic monomers catalyzed by a copper complex has been studied. Reaction of carbon tetrachloride with acrylic monomers catalyzed by a copper salt gave a 1:2 adduct. Methyl trichloroacetate afforded a 1:2 adduct with acrylic monomers, addition of LiCl increased the yield. No 1:2 adduct was obtained from CHCl₃ even in the presence of LiCl. The 1:2 adduct formation mechanism is discussed.     

Synthesis and Rhizopus oryzae mediated enantioselective hydrolysis of α-acetoxy aryl alkyl ketones

Mn(OAc)₃ oxidation of aromatic ketones afforded the α-acetoxy ketones in good yield. Selective hydrolysis of the acetoxy ketones by the fungus Rhizopus oryzae yields (R)-hydroxy ketones in high enantiomeric excess.     

Studies on silyl furans. II. Halodesilylation of 2-trimethylsilyl-3,4-bis(methoxycarbonyl)furans

Reactions of 2-trimethylsilyl-3,4-bis(methoxycarbonyl)furans 1a,b with sulfuryl chloride, bromine, and iodine monochloride in acetonitrile afforded the corresponding 2-halo-3,4-bis(methoxycarbonyl)furans 2a-f via chloro-, bromo-, and iododesilylation in good yields, respectively. However, the reaction of 1a with bromine in carbon tetrachloride mainly gave 2-bromo- 2b and 2-bromo-5-trimethylsilyl-3,4-bis(methoxycarbonyl)furan ( 3 ) in 37% and 45% yields. Similarly, the reaction of 1a with iodine monochloride afforded 1a , 2-chloro- 2a and 2-iodo-3,4-bis(methoxycarbonyl)furan ( 2c ) in 50%, 27%, and 23% yield.     

Charge Transfer Complex Role in the Formation of Chlorobenzene in the γ‐Irradiated Carbon Tetrachloride‐Benzene System

The formation of carbon tetrachloride‐benzene charge transfer complex was confirmed by UV and NMR spectrometric studies. A change in UV spectrum of benzene is observed upon addition of carbon tetrachloride. Whereas the appearance of new bands supports the formation of charge transfer complex. NMR study shows that, chemical shift of benzene pmr signal depends on the CCl₄‐C₆H₆ molar ratio. This observation is another criterion for the formation of benzene‐carbon tetrachloride charge transfer complex. Job's Continuous Variation method indicates that a 2:1 CCl₄‐C₆H₆ charge transfer complex (2:1 CTC) is formed. The association constants (K_2:1) of (2:1 CTC) was found to be 0.0197 M^?2. The maximum concentration of (2:1 CTC) was found to be in samples with 2:1 CCl₄‐C₆H₆ molar ratio (33% benzene mole). On the other hand the maximum yield of chlorobenzene was obtained, also, upon radiolysis of CCl₄‐C₆H₆ samples at a 2:1 molar ratio (33% benzene mole). Therefore, it could be concluded that (2:1 CTC) participates in the formation of chlorobenzene upon radiolysis of the benzene‐carbon tetrachloride system. This conclusion was supported by the dependence of the chlorobenzene yield of a γ‐irradiated carbon tetrachloride‐benzene system (2:1 molar ratio) on irradiation time according to a third order kinetic equation with a very good linearity (R² = 0.9977). Accordingly, the rate constant for the chlorobenzene formation under this condition was found to be ≈ 5.5 × 10^?7 L².mol^?2.h^?1. We propose a radiation chemical mechanism in which the 2:1 CTC plays a role in the formation of chlorobenzene.     

Transformation of Oximes and Alcohols to Carbonyl Compounds Using Amberlite IRA-400 Supported Chromic Acid in the Presence of Zirconium Tetrachloride

A wide variety of oximes and alcohols were efficiently converted to their corresponding aldehydes and ketones in good to excellent yields using amberlite IRA-400 supported chromic acid in the presence of zirconium tetrachloride in refluxing acetonitrile-H2O. Selective oxidation of oximes and alcohols in the presence of other functional groups such as acetal, hydrazone, aldehyde, ether and alkene can be considered as a noteworthy advantage of this method. A wide variety of oximes and alcohols were efficiently converted to their corresponding aldehydes and ketones in good to excellent yields using amberlite IRA-400 supported chromic acid in the presence of zirconium tetrachloride in refluxing acetonitrile-H2O. Selective oxidation of oximes and alcohols in the presence of other functional groups such as acetal, hydrazone, aldehyde, ether and alkene can be considered as a noteworthy advantage of this method.     

Studies on sulfinatodehalogenation XXIII. A new sulfinatodehalogenation reagent: thihurea dioxide1

HSO₂^? generated from thiourea dioxide and sodium bicarbonate in aqueous CH₃CN at 35–45°C reacted with perfluoroalkyl iodides, polyfluoroalkyl bromide, 1,1,1-trichloro-2,2,2-tri-fluoroethane and carbon tetrachloride to give the corresponding sulfinates in good yield. Furthermore, it was shown that the reagent was able to initiate the addition of perfluoroalkyl iodide to olefins and alkynes at 30°C.     

H3Mo12O40P-Catalyzed One-Pot Synthesis of Amidoalkyl Naphthols

Solid H₃Mo₁₂O₄₀P is used for an efficient one-pot synthesis of amidoalkyl naphthols using aromatic aldehydes, β-naphthol, and urea or amides in carbon tetrachloride. The catalyst was efficiently recovered from the reaction mixture and reused with negligible loss of catalyst activity. Ambient conditions, simple workup, and good yield are some of the striking features of the present protocol.     

Quantum yield of Cl* (2P1/2) production in the gas phase photolysis of CCl4 in the ultraviolet

In this paper, we have probed the dynamics of chlorine atom production from the gas phase photodissociation of carbon tetrachloride at 222 and 235 nm. The quantum yield, φ* of Cl* (²P_1/2) production has been determined by probing the nascent concentrations of both excited (²P_1/2) and ground state (²P_3/2) chlorine atoms by suitable resonance-enhanced multiphoton ionization (REMPI) detection schemes. Although at the photolysis wavelengths the absorption of carbon tetrachloride is weak, significant amounts of Cl* are produced. Surprisingly, the quantum yield of Cl* production does not follow the absorption spectrum closely, which gives rise to the possibility of an indirect dissociation mechanism present in CCl₄ along with direct dissociation at these ultraviolet wavelengths     

Dynamic Kinetic Resolution of Homoallylic Alcohols: Application to the Synthesis of Enantiomerically Pure 5,6‐Dihydropyran‐2‐ones and δ‐Lactones

Dynamic kinetic resolution of various homoallylic alcohols with the use of Candida antarctica lipase B and ruthenium catalyst 2 afforded homoallylic acetates in high yields and with high enantioselectivity. These enantiopure acetates were further transformed into homoallylic acrylates after hydrolysis of the ester function and subsequent DMAP‐catalyzed esterification with acryloyl chloride. After ring‐closing metathesis 5,6‐dihydropyran‐2‐ones were obtained in good yields. Selective hydrogenation of the carbon? carbon double bond afforded the corresponding δ‐lactones without loss of chiral information.     

A Novel Synthesis of Isothiocyanates from Amines Using Triphenylphosphine/Carbon Tetrachloride

Abstract

Triethylammonium dithiocarbamates (RNHC (S) S.HNEt₃), prepared from aliphatic and/or aromatic amines, carbon disulfide and triethylamine, were treated with triphenylphosphine/carbon tetrachloride to give the corresponding isothiocyanates in good yields.     

Sonogashira/N-acyliminium ion aromatic π-cyclisation processes: access to tetra- and pentacyclic lactams

Application of the Sonogashira reaction of N-alkynylimides with 2-iodophenol or 2-iodo-N-tosylaniline affords 2-(N-alkylimino)-benzofurans and indoles in good yield. Selective partial reduction of the latter followed by treatment with TsOH generates N-acyliminium ions, which cyclise to afford tetra- and pentacyclic lactams in good yield. The latter are reduced to the analogous cyclic amines by BH₃.     

Direct Introduction of a Dimesitylboryl Group Using Base‐Mediated Substitution of Aryl Halides with Silyldimesitylborane

The first dimesitylboryl substitution of aryl halides with a silylborane bearing a dimesitylboryl group in the presence of alkali‐metal alkoxides is described. The reactions of aryl bromides or iodides with Ph₂MeSi?BMes₂ and Na(OtBu) afforded the desired aryl dimesitylboranes in good to high yields and with high borylation/silylation ratios. Selective reaction of the sterically less‐hindered C?Br bond of dibromoarenes provided monoborylated products. This reaction was used to rapidly construct a D‐π‐A aryl dimesityl borane with a non‐symmetrical biphenyl spacer.     

Palladium-catalyzed Suzuki-Miyaura couplings of potassium aryl trifluoroborates with 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one

Pd(PPh₃)₄ catalyzed Suzuki-Miyaura cross-coupling reactions of 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one with various potassium aryl trifluoroborates afforded the corresponding 4-substituted coumarins or 4-substituted quinolin-2(1H)-ones in good to excellent yield.     

Zirconocene-promoted coupling reaction of terminal acetylenes to geminal enediynes in the presence of p-chloranil

Reaction of alkynyllithium with zirconocene dichloride in the presence of quinones afforded zirconoenediynes in good yields. Treatment of the zirconoenediyne with p-chloranil in the presence of CuCl afforded 1,1,4,4-tetraethynyl-1,3-diene in good yield. In the presence of CuCl and/or Pd(PPh₃)₄, the zirconoenediynes could be transformed into various enediyne derivatives through coupling reaction with electrophiles.     

Iron-mediated and -catalyzed metalative cyclization of electron-withdrawing-group-substituted alkynes and alkenes with Grignard reagents

Treatment of ethyl (E)‐5,5‐bis[(benzyloxy)methyl]‐8‐(N,N‐diethylcarbamoyl)‐2‐octen‐7‐ynoate with an iron reagent generated from FeCl₂ and tBuMgCl in a ratio of 1:4 (abbreviated as FeCl₂/4 tBuMgCl) afforded ethyl [4,4‐bis[(benzyloxy)methyl]‐2‐[(E)‐(N,N‐diethylcarbamoyl)methylene]cyclopent‐1‐yl]acetate in good yield. Deuteriolysis of an identical reaction mixture afforded the bis‐deuterated product ethyl [4,4‐bis[(benzyloxy)methyl]‐2‐[(E)‐(N,N‐diethylcarbamoyl)deuteriomethylene]cyclopent‐1‐yl]deuterioacetate, thus confirming the existence of the corresponding dimetalated intermediate. The latter intermediate can react with halogens or aldehydes to facilitate further synthetic transformations. The amount of FeCl₂ was reduced to catalytic levels (10 mol % relative to enyne), and catalytic cyclizations of this sort proceeded with yields comparable to those of the aforementioned stoichiometric reactions. The cyclization of diethyl (E,E)‐2,7‐nonadienedioate with a stoichiometric amount of FeCl₂/4 tBuMgCl, followed by the addition of sBuOH as a proton source, afforded a mixture of 2‐(ethoxycarbonyl)‐3‐bicyclo[3.3.0]octanone and its enol form in good yield. The use of aldehyde or ketone in place of sBuOH afforded 2‐(ethoxycarbonyl)‐3‐bicyclo[3.3.0]octanone, which has an additional hydroxyalkyl side chain. Additionally, the metalation of a carbon–carbon unsaturated bond in N,N‐diethyl‐5,5‐bis[(benzyloxy)methyl]‐7,8‐epoxy‐2‐octynamide or (E)‐3,3‐dimethyl‐6‐(N,N‐diethylcarbamoyl)‐5‐hexenyl p‐toluenesulfonate with FeCl₂/4 tBuMgCl or FeCl₂/4 PhMgBr was followed by an intramolecular alkylation with an epoxide or alkyl p‐toluenesulfonate to afford 5,5‐bis[(benzyloxy)methyl]‐3‐[(E)‐(N,N‐diethylcarbamoyl)methylene]‐1‐cyclohexanol or N,N‐diethyl(3,3‐dimethylcyclopentyl)acetamide after hydrolysis. In both cases, the remaining metalated portion α to the amide group was confirmed by deuteriolysis and could be utilized for an alkylation with methyl iodide.     

Synthesis of azoxybenzene-SbCl5 complexes and their selective ortho-wallach rearrangement

When an equimolar solution of various azoxybenzenes and SbCl₅ in carbon tetrachloride were mixed, a 1:1 complex immediately deposited as orange crystals in high yield. The thermal reaction of these complexes in inert solvents gives o-hydroxy-azobenzene selectively. On the contrary, other Lewis acids such as TiCl₄, AlCl₃, FeCl₃ and ZnBr₂ failed to give an isolatable complex with azoxybenzene, and their direct thermal reaction with azoxybenzene resulted in deoxygenation to yield azobenzene as a main product.     

Photometric determination of osmium with thiourea after extraction of the tetroxide

A general method for the determination of 5–1000 γ of osmium involves extraction of osmium tetroxide with chloroform or carbon tetrachloride, followed by shaking the organic solvent with a sulfuric acid solution, of thiourea to form red Os(NH₂CSNH₂)₆⁺³, whose color intensity is measured photometrically. A sharp separation of osmium from ruthenium can be obtained by reducing Os(VIII) and Ru(VIII) with ferrous sulfate and then oxidizing Os(IV) to Os(VIII) with nitric acid; ruthenium remains reduced and is not extracted by chloroform or carbon tetrachloride.     

Synthesis of Perfluoroalkyl‐Substituted γ‐Lactones and 4,5‐Dihydropyridazin‐3(2H)‐ones via Donor?Acceptor Cyclopropanes

Rh₂(OAc)₄‐Catalyzed decomposition of diazo esters in the presence of perfluoroalkyl‐ or perfluoroaryl‐substituted silyl enol ethers smoothly provided the corresponding alkyl 2‐siloxycyclopropanecarboxylates in very good yields. The generated donor? acceptor cyclopropanes are equivalents of γ‐oxo esters, which we demonstrated by their one‐pot transformations to yield fluorine‐containing heterocycles. A reductive procedure selectively afforded perfluoroalkyl‐substituted γ‐hydroxy esters or γ‐lactones. The treatment of the donor? acceptor cyclopropanes with hydrazine or phenylhydrazine afforded a series of perfluoroalkyl‐ and perfluoroaryl‐substituted 4,5‐dihydropyridazin‐3(2H)‐ones.     

Palladium-catalyzed hydroarylation of alkynes with arylboronic acids

Reaction of symmetrical and unsymmetrical alkynes with arylboronic acids, using PdCl₂ as catalyst source and i-Pr₂NPPh₂ as ligand, afforded trisubstituted alkenes with regioselectivity in good to excellent yields without a common additional acetic acid. Its efficiency has been demonstrated by its good functional groups, high yield and crowded substrates.     

NH2 stretching vibration absorption and association mechanism of methylamine in n-hexane and carbon tetrachloride

Hydrogen bonding of methylamine in n-hexane is studied by recording the NH₂ stretching vibration absorption as a function of temperature and concentration and comparing it to the absorption in carbon tetrachloride. A continuous or quasi-continuous shift of the symmetric NH₂ stretching vibration on association in hexane and a discontinuous shift by about the same total amount together with an intensity change between a monomeric and an associated band in carbon tetrachloride suggest different association mechanisms in the two solvents. These are related to the enhancement of the proton donor or acceptor ability of the amine resulting from complexation with the solvent in carbon tetrachloride and to a similar influence of the added amine molecules, corresponding to the concept of hydrogen bond cooperativity, in hexane. Differences of 3–5 kJ mol⁻¹ between the mean association energy of methylamine in hexane and of methylamine or its homologues in carbon tetrachloride can be attributed to the energy needed for disruption of the complexes with the chlorine solvent and therefore support the assumption of the complex formation. Further results concern the chain-length dependence of the amine association, the association degrees in the two solvents and the intensity behaviour of the symmetric vibration of the neat compound in i.r. and Raman spectra.