Azobenzene-bridged calix[8]arenes

An azobenzene bridge was introduced into the lower (or smaller) rim of p-tert-butylcalix[8]arene (1) and 1,5-calix[8]crown-3 (2) to form 1,4-singly bridged (3) and 1,5:3,7-doubly bridged (4) calix[8]arene derivatives, respectively. Trans and cis isomers of conformationally rigid 4 were isolated. The quantum yields of the trans-cis photoisomerisation reactions have been measured.     

Atropisomerism in 1,5-bridged calix[8]arenes

[structure: see text] The first example of two discrete calix[8]arene conformational isomers, 2 and 2a, has been obtained by exhaustive benzylation of 1,5-tetramethylene-bridged calix[8]arene 1. It is demonstrated, with the aid of X-ray crystallography, that these atropisomers have two 3/4-cone halves oriented syn or anti with respect to the bridge/bridgeheads moiety. VT NMR studies indicate that the tert-butyl-through-the-annulus inversion is inhibited in 1, while groups larger than n-hexyl or benzyl are required for curtailing the O-through-the-annulus route.     

Supramolecular polymeric complexes of calix[8]arenes

Formation of ionic complexes of calix[8]arenes with polymers of various basicities was studied, and previously unknown ternary polymeric complexes of calix[8]arenes of the ion-ion (polymer-calixarene-uranyl ion) and ion-hydrophilic molecule-hydrophobic molecule (polymer-calixarene-fullerene) types were prepared.     

Polycationic calix[8]arene receptors grafted onto polymeric matrix: smart material for heparin neutralization

Heparin is widely prescribed as an anticoagulant medicine and is beneficial to millions of patients. However, the use of heparin in open‐heart surgery, where it enables a continuous flow of blood throughout the process, is still problematic. Its anticlotting properties are crucial for a successful operation, but after surgery the patient's blood needs to return normal and acquire its former ability to coagulate. If this process fails, the outcome may prove fatal. Currently, protamine sulfate is used to neutralize heparin after open‐heart surgery. However, protamine itself causes allergic reactions and other side effects and is sometimes fatal. For this reason, the finding of new heparin antagonists or much safer methods for heparin removal from blood is currently of great interest. Recently we have reported on the synthesis of calix[8]arene polycations that have shown an exceptional neutralization power towards heparin both in physiological solution and in blood. In this work, we have studied the grafting of these calix[8]arene derivatives onto a polymeric matrix with the aim to obtain a new polymeric material appropriate for the design and realization of filters or membranes able to effectively remove heparin from blood. In this way, also the side effects connected to systemic administration of heparin antagonists are avoided. Besides the synthesis, preliminary results on the neutralization capacity towards heparin, both in physiological solution and in blood, are reported. Copyright © 2009 John Wiley & Sons, Ltd.     

Nonionogenic star-shaped calix[8]arenes: Synthesis and ionophore properties

New approach to the synthesis of star-shaped polymers based on calix[8]arene with amphiphilic arms of nonionogenic nature is described. The ionophore properties of the resulting polymer with respect to ions of alkali metals, europium, and uranium were studied by an example of a polymer containing residues of ω-cetyloligoethylene oxide as arms.     

Chromogenic azo-coupled calix[4]arenes

Novel 1,3-alternate calix[4]azacrowns having an azo chromophoric pendent group were synthesized, and their 1,3-alternate conformations were confirmed by X-ray crystal structure. In view of the hypsochromical UV band shifting upon cation complexation, azo-coupled calix[4]azacrown-5 (3) showed the most selective shifting with alkali and alkaline metal ions. In addition, 3 revealed K+ ion selectivity not only due to the size comparability between the K+ ion and the azacrown-5 loop but also due to a significant K+-pi interaction between the two aromatic rings and the K+ ion. The UV band shifting is also dependent on the lipophilicity of the species of counteranion used.     

The selective functionalisation and difunctionalisation of p-substituted calix[6]arene and calix[8]arenes using hydrophilic moieties

Methodologies to access water soluble large ringed calixarenes in good yield using efficient synthetic procedures have been investigated. Symmetrical partial functionalisations at the lower rim are described using activated [n]ethylene glycol chains and the addition behaviour contrasted with that of bromoalkanenitriles which proceeds with no observed regioselectivity. Full functionalisations of the calixarenes bearing hydrophilic groups are then investigated and a two-step procedure established which appears to be generally applicable for the addition of different [n]ethylene glycol chains. Furthermore, difunctionalisation under different reaction conditions are described. Throughout, strategies for the characterisation of these high mass compounds are outlined.     

Conformationally restricted calix[8]arenes substituted at all methylene bridges

Reaction under S(N)1 conditions of the octabromocalix[8]arene derivative 2d with alcohols proceeds in nonstereoselective fashion, but all-cis octaryl derivatives are the single major products in the reaction with arenes. The incorporation of aryl substituents at the bridges rigidifies the calix[8]arene skeleton.     

Biochemistry of anionic calix[n]arenes

This review treats the biological properties of the various anionic calix[n]arenes, both as soluble forms and in the colloidal state. The complexation of these molecules with amino-acids, peptides and proteins is discussed, as is their interaction with model membranes. The complexations with various Active Pharmaceutical Ingredients as complexes, for tamoxifen as solid state and colloidal structures, are treated in depth. Two sections deal with the direct biological action of the calix[n]arenes and their use as biosensors. A final section deals with the toxicity, in reality the lack of toxicity of the calix[n]arenes.     

Anion receptors based on ureido-substituted thiacalix[4]arenes and calix[4]arenes

The regioselective nitration of 25,27-dipropoxythiacalix[4]arene was carried out as a key step in the synthesis of thiacalix[4]arene derivative bearing two arylureido functions on the upper rim. The preorganisation of ureido units using the thiacalix[4]arene/calix[4]arene moieties as a molecular scaffold gave novel anion receptors. These compounds, albeit based on hydrogen bonding interactions, show good complexation ability even in highly HB-competitive solvent, such as DMSO. Direct comparison of otherwise identical structures 6a and 7a revealed remarkable dominance of the thiacalix[4]arene derivative over its classical analogue in anion binding.     

Regioselective ipso-nitration of calix[4]arenes

A novel protection/deprotection method leading to the regioselective ipso-substitution of calix[4]arenes is described. The introduction of nosyl (p-nitrobenzenesulfonyl) groups into the lower rim of partly alkylated tert-butylcalix[4]arenes leads subsequently to the exclusive ipso-nitration of the alkylated phenol rings, while the protecting groups can be easily removed in the next step. This method gives dialkoxy- or trialkoxy-substituted calix[4]arenes with nitro groups on the alkylated rings and tert-butyl groups on the remaining ones. The above substitution pattern is complementary to the isomers so far known in the chemistry of calix[4]arenes and could be used in the design of novel type of calixarene-based receptors.     

杯芳烃和柱芳烃桥梁部位的衍生及其功能化

随着大环化学的快速发展,对杯芳烃、柱芳烃及其他类似化合物的桥梁亚甲基部位进行高效修饰的方法日益引起人们的关注.桥梁部位修饰后的大环衍生物,在不改变其原有属性的基础上增加了新的功能,不仅可以引入更多的功能基团,而且可以通过主客体的自组装行为,进一步拓展杯芳烃和柱芳烃等超分子大环在药物递送、化学传感、荧光体系构建等诸多领域...     

Fullerene encapsulation with calix[5]arenes

This paper presents the synthesis of the fullerene hosts based on the calix[5]arenes and their binding properties. Calix[5]arenes 1a, 2, 3a bind C₆₀ or C₇₀ in organic solvents. The solvent effect of the fullerene complexation was clearly observed; the association constant decreases in a solvent with high solubility for C₆₀. Covalently linked double-calix[5]arenes 4-6 were also investigated on their binding properties for fullerenes in organic solvents. Their binding abilities for both C₆₀ and C₇₀ are extremely high in toluene solution. Higher binding selectivity toward C₇₀ is observed by all the double-calix[5]arenes. The selectivity of 5a toward C₇₀/C₆₀ is highest in toluene with a value of 10. The structures of the supramolecular complexes of the calix[5]arene hosts and C₆₀ or C₇₀ were investigated by using ¹H and ¹³C NMR studies. The molecular mechanics calculation and X-ray structure reveal that the interior of the calix[5]arene is complementary to the exterior of C₆₀ molecule. In contrast, the host-guest complexes of C₇₀ with the simple calix[5]arenes take many conformational options due to its less symmetric shape. The molecular mechanics calculation and our chemical shift simulation nicely worked to estimate the reliable structures; the calix[5]arene cavity takes up C₇₀ molecule, and the C₇₀ molecule tilts significantly from the C5 axis of the calix[5]arene. In the case of the host-guest complex of C₇₀ with the double-calix[5]arene, the molecular dynamics simulation of the host-guest complex represented the realistic movement of the bound C₇₀ inside the cavity. The combination of the molecular dynamics simulation and the chemical shift simulation of the host-guest complex suggested that the C₇₀ molecule rapidly moves inside the cavity.     

Head-to-tail connected double calix[4]arenes

Summary New macrotricyclic compounds consisting of two calix[4]arene substructures connected by aliphatic chains of various length (three to five carbon atoms) between two oppositep-positions and two distal phenolic oxygens have been synthesized. Starting withp-tert-butyl-calix[4]arene, two O-protected phenolic units are attachedvia ether links in 1,3-position by reaction with the corresponding tosylates. After deprotection, the new calix[4]arene is formed by fragment condensation with 2,6-bisbromomethylated 4-alkylphenols. The structure of one example (8c) has been confirmed by single crystal X-ray analysis. Both calixarene parts assume the cone conformation, a molecule of acetonitrile being included in both cavities.

---

Doppelte Calix[4]arene in Kopf-Schwanz-Verknüpfung

Zusammenfassung Neue makrotricyclische Verbindungen, in denen zwei Calix[4]aren-Einheiten durch aliphatische Ketten unterschiedlicher Länge (drei bis fünf C-Atome) zwischen zwei gegenüberliegendenp-Positionen und zwei gegenüberliegenden Phenolsauerstoffen verknüpft sind, wurden hergestellt. Ausgehend vonp-tert-Butyl-calix[4]aren werden zunächst zwei O-geschützte Phenolbausteine in 1,3-Stellung durch Umsetzung mit den entsprechenden Tosylaten etherartig gebunden. Nach Abspaltung der Benzylether-Schutzgruppe wird durch Fragmentkondensation mit 2,6-bisbrommethylierten 4-Alkylphenolen das neue Calix[4]aren gebildet. Für8c wurde die Struktur durch Einkristallröntgenstrukturanalyse bestätigt. Beide Calixarenteile nehmen diecone-Konformation ein, wobei in die beiden Hohlräume je ein Molekül Acetonitril eingeschlossen wird.

     

Upper rim tetrathiafulvalene-bridged calix[4]arenes

The synthesis of novel upper rim calix[4]arene-tetrathiafulvalene conjugates 1a-d has been performed by bridging the tetrachloromethylated calix[4]arene derivative 4 with the corresponding tetrathiafulvalene-dithiolates. The cyclic voltammetry of 1a-d shows a two-step oxidation behavior, whereas NMR binding titrations showed their binding affinity to pyridinium salts. X-ray structure of 4 features calixarene fixed in the pinched cone conformation; its crystal packing is defined by the network of C-H···Cl weak hydrogen bonds.     

Remarkable alkali cation template effect in 1,5-bridged calix[8]arenes

Treatment of 1,5-bridged calix[8]arenes 2-4 with alkali metal carbonates produces salts in which an included cation acts as a conformational template. This induces the folding of calix[8]arene skeleton in a conformation in which the triads of contiguous OH-bearing rings adopt a 3/4-cone conformation with all hydroxyls converging toward the same center. The template effect requires the presence of short bridges (ethylene, tetramethylene, diethylene glycol) and became stronger by increasing the cation dimension up to that of Cs(+).     

Fourfold [2]rotaxanes based on calix[4]arenes

Tetraurea calix[4]arenes with four loops form exclusively heterodimers with open-chain urea calix[4]arenes when they are dissolved in aprotic solvents. These assemblies can be considered as pseudorotaxanes. If open-chain tetraureas ending with maleic imide functions are used, their Diels-Alder reaction with 1,4,5,8-tetrapentoxyanthracene leads to tetra[2]rotaxanes which cannot be split into the single calixarene parts by hydrogen bond breaking solvents.     

Water sorption on crystalline calix[4]arenes

The water sorption isotherms on seven samples of crystalline calix[4]arenes were obtained by the isopiestic method. The experimental isotherms were described by the Harkins-Jura equation for condensed films. The conclusion was made that water was adsorbed on the surface of calixarene crystals or through pores of a fairly large diameter with the formation of a condensed film. Original Russian Text ? O.V. Surov, M.I. Voronova, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 5, pp. 943–947.     

Dendritic octa-CMPO derivatives of calix[4]arenes

Calix[4]arenes substituted at the narrow or wide rim by eight carbamoylmethyl-phosphine oxide (CMPO) functions in a dendritic manner were synthesised and studied in extraction of Eu³⁺ and Am³⁺ from aqueous nitric acid into o-nitrophenylhexyl ether. ¹H NMR relaxivity titrations for a wide rim octa-CMPO reveal the clear formation of a solvent-free 1:2 ligand/metal complex, while the wide rim tetra-CMPO formed oligomeric complexes under similar conditions.