The use of denaturing gradient gel electrophoresis to screen for DNA sequence polymorphisms in the human factor VIII gene

We describe the use of denaturing gradient gel electrophoresis to screen for DNA sequence polymorphisms in the human factor VIII gene. DNA fragments that differ in sequence by only a single base pair can be separated on denaturing gradient gels due to changes in their melting behavior. Previous studies have demonstrated the use of denaturing gradient gels to detect sequence changes in human genomic DNA, including mutations in the beta globin gene and polymorphisms on chromosome 20. We have begun to use denaturing gradient gels to look for polymorphisms within the human factor VIII gene. The DNA sequences of seven cloned fragments from introns in the human factor VIII gene were determined and used to predict a melting map for each fragment. The melting behavior of each cloned fragment was evaluated by electrophoresis into denaturing gradient gels. Appropriate fragments were then used as radioactive probes for hybridization to human DNA samples that had been digested with restriction enzymes. Heteroduplexes formed between the probe and genomic DNA samples were electrophoresed into denaturing gradient gels. The final positions of heteroduplex bands were determined by autoradiography. We describe a general approach for using denaturing gradient gel electrophoresis to find DNA polymorphisms, with particular emphasis on the predictive value of DNA sequence data. We compare the efficiency of polymorphism detection by denaturing gradient gel electrophoresis with detection by restriction fragment length polymorphism (RFLP) analysis. The factor VIII gene appears to have a low level of DNA sequence polymorphism.(ABSTRACT TRUNCATED AT 250 WORDS)     

Genome scanning by two-dimensional DNA typing: the use of repetitive DNA sequences for rapid mapping of genetic traits.

The existence of repetitive DNA sequences offers the possibility to assess the mammalian genome for individual variation in its entirety rather than at one or only a few sites. In order to fully explore the various sets of mammalian repeat sequences for this purpose, analytical tools are required which allow many if not all individual members of sets of repetitive elements to be resolved and identified in terms of location and allelic variation. We have applied and further developed an electrophoretic system, two-dimensional DNA typing, which may fulfill these requirements. The two-dimensional system combines separation of DNA fragments by size in a neutral gel, with separation by sequence composition in a denaturing gradient gel. By hybridization with minisatellite- and simple-sequence core probes and by inter-repeat polymerase chain reaction techniques, it is possible to obtain individual--and even chromosome-specific separation patterns that consist of hundreds of spots. Computerized image analysis and matching of such spot patterns allows the rapid assessment of multiple polymorphisms, spread over the genome, to monitor genetic variability in populations. When coupled to databases of polymorphic DNA markers with a known genomic location, two-dimensional DNA typing can greatly accelerate the mapping of genetic traits in humans, animals, and plants.     

Sequencing and four-state minisatellite variant repeat mapping of the D1S7 locus (MS1) by fluorescence detection

Minisatellite variant repeat mapping by polymerase chain reaction (MVR-PCR) reveals an enormous degree of variation in the human minisatellite regions. The original approach involved the use of 32P-labelled probes to detect the MVR-PCR products generated. To date, the loci mapped include D1S8, D7S21 and D16S309. However, the most polymorphic locus, D1S7 (MS1), which has been used in forensic analysis, has presented technical difficulties, initially due to its short 9 bp repeats that are much shorter than any conventional primer sequences. This was overcome by using the method of "wrapping around" primers employing inosine at the redundancy position. The difficulty of cloning highly repetitive DNA was overcome by utilising specialised competent SURE cells. We report the cloning and sequencing of selected short MS1 alleles to determine the variety of repeat types. This survey revealed nine types, four of which represented greater than 80% of the sequenced repeats. The reported MVR-PCR system maps the MS1 locus for these four common repeat types by fluorescence detection.     

PCR-free digital minisatellite tandem repeat genotyping

We demonstrated a proof‐of‐concept for novel minisatellite tandem repeat typing, called PCR‐free digital VNTR (variable number tandem repeat) typing, which is composed of three steps: a ligation reaction instead of PCR thermal cycling, magnetic bead‐based solid‐phase capture for purification, and an elongated sample stacking microcapillary electrophoresis (μCE) for sensitive digital coding of repeat number. We designed a 16‐bp fluorescently labeled ligation probe which is complementary to a repeat unit of a biotinylated synthetic template mimicking the human D1S80 VNTR locus and is randomly hybridized with the minisatellite tandem repeats. A quick isothermal ligation reaction was followed to link the adjacent ligation probes on the DNA templates, and then the ligated products were purified by streptavidin‐coated magnetic beads. After a denaturing step, a large amount of ligated products whose size difference was equivalent to the repeat unit were released and recovered. Through the elongated sample stacking μCE separation on a microdevice, the fluorescence signal of the ligated products was generated in the electropherogram and the peak number was directly counted which was exactly matched with the repeat number of VNTR locus. We could successfully identify the minisatellite tandem repeat number with only 5 fmol of DNA template in 30 min.     

Microelectrophoresis for the separation of DNA fragments.

A methodology has been developed which significantly reduces the linear dimension necessary for the electrophoretic separation of DNA fragments and oligonucleotides. DNA fragments are rapidly separated into compact, resolvable microscopic banding patterns which can be detected using a high-resolution electronic imaging system. Separations can be carried out in either capillary tube or thin-layer (slab) microgel formats of one centimeter or less in length. The complete separation of all eleven fragments (1353 to 72 base pairs) of the pi X174 DNA/HaeIII restriction ladder was achieved in a total running distance of less than 2 mm and in less than 2 min. The observed band widths for the larger fragments (1353-603 bp) ranged from 18 to 25 microns, with the intermediate and smaller fragments (310 to 72 bp) ranging from 30 microns to 60 microns. The ethidium bromide-stained microgels were analyzed using an epifluorescent microscope combined with an intensified charged coupled device imaging system. In other experiments, single-base resolution of fluoresceinated oligonucleotides in the 20-30 nucleotide range was demonstrated. DNA sequencing may be possible with further optimization. This new methodology departs from the conventional gel formulations and electrophoretic procedures used for the separation DNA fragments. High voltage gradients and the use of highly concentrated and crosslinked homogeneous polyacrylamide gels effects the rapid separation of DNA fragments in very short distances. Analysis of the microgels with proteins of known size (Stokes radius) indicates that separations are occurring in gels with pore sizes close to the diameter of double-stranded DNA.(ABSTRACT TRUNCATED AT 250 WORDS)     

Fast separation of DNA sequencing fragments in highly alkaline solutions of linear polyacrylamide using electrophoresis in bare silica capillaries

An optimized procedure for the fast separation of DNA sequencing fragments in short bare fused-silica capillaries filled with highly alkaline solutions of replaceable linear polyacrylamide is presented. High denaturing abilities of the separation media at pH values over 12 are the main reason for their applications in analyses of ssDNA fragments. Moreover, the alkaline solutions of polyacrylamide provide other advantageous properties: three times higher electrophoretic mobility of ssDNA fragments in comparison to those in urea, negligibly low electroosmotic flow in uncoated capillaries, and an adequate stability to a fast alkaline hydrolysis. The separation power of this procedure is enhanced strongly by using monocarboxy poly(ethylene glycol), a terminator for transient isotachophoresis, which eliminates the electromigration dispersion. A high separation efficiency of our system enables to reduce analysis time to several minutes by decreasing the effective lengths of capillaries to 7 cm. A special sample introduction by diffusion is successfully applied. The experimental results demonstrate a potential of the alkaline electrolytes for an implementation in diagnostic sequencing practice.     

Improved resolution power of electrophoretic fractionation of DNA using a voltage gradient "up and down" application

The improved resolution power of electrophoretic fractionation of DNA in a wide range of molecular masses is demonstrated using an "up and down" application of voltage gradient gel electrophoresis (VGGE). This application also allows separation of different DNA fragments which are poorly fractionated in conventional electrophoresis.     

Analysis and purification of DNA restriction fragments by high-performance liquid chromatography.

The purification and analysis of restriction fragments play a very important role in molecular biology but the traditional assay methods of DNA fragments, based on gel electrophoresis and caesium chloride gradient centrifugation, are time-consuming and difficult to quantify. High-performance liquid chromatography provides an alternative method which allows the direct quantitation of picogram amounts of eluents in short time. In the present work we report the separation of different restriction fragments, the purification of some fragments and the relationship between the length of double-stranded DNA fragments and peak areas.     

Infrared fluorescent automated detection of thirteen short tandem repeat polymorphisms and one gender-determining system of the CODIS core system

We used an infrared (IR) automated fluorescence monolaser sequencer for the analysis of 13 autosomal short tandem repeat (STR) systems (TPOX, D3S1358, FGA, CSF1PO, D5S818, D7S820, D8S1179, TH01, vWA, D13S317, D16S359, D18S51, D21S11) and the X-Y homologous gene amelogenin system. These two systems represent the core of the combined DNA index systems (CODIS). Four independent multiplex reactions, based on the polymerase chain reaction (PCR) technique and on the direct labeling of the forward primer of every primer pair, with a new molecule (IRDye800), were set up, permitting the exact characterization of the alleles by comparison with ladders of specific sequenced alleles. This is the first report of the whole analysis of the STRs of the CODIS core using an IR automated DNA sequencer. The protocol was used to solve paternity/maternity tests and for population studies. The electrophoretic system also proved useful for the correct typing of those loci differing in size by only 2 bp. A sensibility study demonstrated that the test can detect an average of 10 pg of undegraded human DNA. We also performed a preliminary study analyzing some forensic samples and mixed stains, which suggested the usefulness of using this analytical system for human identification as well as for forensic purposes.     

Highly alkaline electrolyte for single-stranded DNA separations by electrophoresis in bare silica capillaries.

A new, highly denaturing electrolyte system based on a solution containing 0.01 M NaOH, 0.0015 M Na2B4O5(OH)4 and a replaceable polymer sieving medium was designed for the separation of single-stranded DNA fragments in bare fused-silica capillaries. Extreme denaturing power, together with the optimized composition of the electrolyte, allows for a separation efficiency as high as 2,300,000 height equivalents to a theoretical plate per meter. Sample denaturation in alkaline solutions provides single-stranded DNA fragments without any intra- or intermolecular interactions at room temperature. Their electrophoretic mobilities were found to be twice those of fragments denatured by dimethylformamide or HCl. This can be interpreted in terms of an increased effective charge on the DNA molecules. The surprisingly weak electroosmosis (6 x 10(-10) m2 V-1 s-1) of polymer solutions at pH 12 or higher is considered to be the result of the dissolution of the silica capillary wall. A highly viscous thin layer of dissolved silica probably causes a shift of the slipping plane further away from the wall to the lower value of the zeta potential. Applications of the electrolyte in clinical diagnostics demonstrate its remarkable properties.     

Massively parallel sequencing of STRs using a 29-plex panel reveals stutter sequence characteristics

Massively parallel sequencing of forensic STRs simultaneously provides length-based genotypes and core repeat sequences as well as flanking sequence variations. Here, we report primer sequences and concentrations of a next-generation sequencing (NGS)-based in-house panel covering 28 autosomal STR loci (CSF1PO, D1GATA113, D1S1627, D1S1656, D1S1677, D2S441, D2S1776, D3S3053, D5S818, D6S474, D6S1017, D6S1043, D8S1179, D9S2157, D10S1435, D11S4463, D13S317, D14S1434, D16S539, D18S51, D18S853, D20S482, D20S1082, D22S1045, FGA, TH01, TPOX, and vWA) and the sex determinant locus Amelogenin. Preliminary evaluation experiments showed that the panel yielded intralocus- and interlocus-balanced sequencing data with a sensitivity as low as 62.5 pg input DNA. A total of 203 individuals from Yunnan Bai population were sequenced with this panel. Comparative forensic genetic analyses showed that sequence-based matching probability of this 29-plex panel reached 2.37 × 10⁻²⁹, which was 23 times lower than the length-based data. Compound stutter sequences of eight STRs were compared with parental alleles. For seven loci, repeat motif insertions or deletions occurred in the longest uninterrupted repeat sequences (LUS). However, LUS and non-LUS stutters co-existed in the locus D6S474 with different sequencing depth ratios. These results supplemented our current knowledge of forensic STR stutters, and provided a sound basis for DNA mixture deconvolution.     

DNA sequencing and multiplex STR analysis on plastic microfluidic devices

The ability of plastic microfluidic devices with separation channel lengths of 6, 10 or 18 cm to perform high-quality and high-performance ssDNA analysis was evaluated. Specifically, four-color DNA sequencing separation of a terminator sequencing standard using replaceable, urea-denaturing linear polyacrylamide (LPA) solution as a sieving matrix, yielded read lengths of 410 bases in 15 min with base calling accuracy of 99.2% on a 6-cm device, and 640 bases in 35 min with accuracy of 98.0% on a 18-cm device. A two-color sizing analysis of four-locus (CSF1PO, TPOX, TH01, vWA) short tandem repeats (STRs) allelic ladder on a 10-cm device indicated a mean SD of +/- 0.08 base pairs (bp) between runs, and single bp resolution of spiked TH01 allele 9.3 (198 bp) from TH01 allele 10 (199 bp) of the CTTv ladder with R = 0.81. A four-color multiplex sizing analysis of three different AmpFlSTR allelic ladders consisting of nine loci (D3S1358, vWA, FGA, D8S1179, D21S11, D18S51, D5S818, D13S317, D7S820) and gender alleles (Amelogenin) on a 10-cm device had a mean SD of +/- 0.15 bp between runs for sizing three loci, i.e., FGA, D18S51 and D3S818; alleles differing by 2 bp in size were resolved with resolutions close to baseline. This work demonstrates that plastic microfluidic devices are capable of quality sequencing and STR sizing comparable to that of glass devices of similar separation lengths.     

DNA typing in hereditary disease.

An increasing number of hereditary diseases are becoming amenable to diagnosis by analysis of DNA as the responsible genes are located and identified. Gel electrophoresis of DNA fragments plays a central role in the diagnosis of hereditary disease. Electrophoretic separation of differently sized fragments enables the characterization or typing of normal variants which are known to be genetically linked to disease genes. For some diseases it is possible to directly detect mutations by DNA electrophoresis. Deletion mutants may be detected by a restriction fragment of altered size or by a failure to amplify a coding region with the polymerase chain reaction. Carriers of small deletions, involving a few base pairs, may be identified by DNA amplification which produces heteroduplexes that show characteristic, anomalous electrophoretic migration. Mutations that alter restriction sites also alter the sizes of restriction fragments. Common disease mutations that alter a single base pair may be detected using a pair of reactions with normal and mutant oligonucleotides under conditions where a perfect match is necessary for hybridization, amplification or ligation. Alternatively a mismatched oligonucleotide primer may be designed to generate a restriction site with either the normal or mutant allele, following DNA amplification. Finally a number of techniques are available that are useful as screening tools for novel mutations.     

Rapid high-performance liquid chromatography of nucleic acids with polystyrene-based micropellicular anion exchangers

Nucleic acids were separated by ion-exchange chromatography on 30 x 4.6 and 100 x 4.6 mm columns packed with a micropellicular anion exchanger made of 3-microns rigid polystyrene-based non-porous microspheres with a covalently bound hydrophilic layer and DEAE functional groups at the surface. The stationary phase particles showed negligible swelling in methanol according to permeability measurements with water and methanol. Nucleic acids and their fragments including synthetic single-stranded oligonucleotides, linear, nicked and supercoiled DNAs as well as DNA restriction fragments were separated in less than 5 min, a time scale that is much smaller than that of conventional high-performance liquid chromatographic analysis for such samples. When only buffer and sodium chloride were used in the eluent for the separation of double-stranded DNA restriction fragments pGEM-3Z/Taq I, electrophoretic analysis of the effluent revealed the presence of smaller fragments in the bands of the larger ones. Upon addition of ethylenediaminetetraacetic (EDTA) salt to the eluent, however, such contamination by shorter fragments was no longer observed. In the absence of EDTA, magnesium chloride in the eluent at a concentration of 1 mM precluded the separation of the restriction fragments under otherwise identical chromatographic conditions.     

Prestaining method as a useful tool for the agarose gel electrophoretic detection of polymerase chain reaction products with a fluorescent dye SYBR gold nucleic acid gel stain.

Three staining methods using SYBR Gold Nucleic Acid Gel Stain (SYBR Gold) as a fluorescent dye were evaluated for the agarose gel electrophoretic detection of DNA. The methods involve prestain, in-gel stain, and poststain methods. DNA markers and polymerase chain reaction (PCR) products obtained by minisatellite variant repeat-PCR (MVR-PCR) amplification in a D1S8 locus were used as model DNA and practical samples, respectively. Among the three methods tested under the usual electrophoretic conditions, a prestain method using a 10000-fold diluted SYBR Gold solution showed most excellent features regarding cost and rapidity to use with good stainability and resolution over loaded DNA amounts of about 98 ng to 300 ng. The prestain method was found to be applicable to the analysis of DNA in MVR-PCR products from a human hair root.     

The electrophoretic mobility of DNA three-way junctions is affected by the sequence of overhanging single-stranded ends

The folding of three- and four-way DNA junctions is often assessed by comparing the electrophoretic mobility of restriction enzyme fragments, using the long-short arm assay. We have compared the mobility of synthetic three-way junctions that contain identical branch point sequences, but different restriction sites in the arms. We show that the mobility of fragments is affected by the sequence of the overhanging ends. In general, GC-rich overhangs produce fragments with anomalous mobilities. These anomalies can be prevented by treating the cleaved junctions with mung bean endonuclease, elevating the electrophoresis temperature or using blunt cleaving restriction endonucleases.     

Stepwise gradient of linear polymer matrices in microchip electrophoresis for high-resolution separation of DNA

The stepwise gradient of linear polymer matrices in microchannel electrophoresis is proposed as a means of achieving high-resolution separation of DNA samples containing a wide range of fragment sizes. In this method, multiple discrete steps in terms of polymer type or concentration are created in the microchannel by injecting appropriate solutions in order. The mixing of the various steps is found to be negligible compared to the effective length of separation channel, confirming that a stepwise gradient of matrices is formed. This technique is successfully applied to the analysis of restriction digest fragments and DNA ladders, and is demonstrated to provide higher resolution than the isocratic method, for both small and large fragments simultaneously. Even though the stepwise gradient is created manually, the reproducibility of the migration times of fragments in DNA samples is found to be quite good. Taken the separation of 100 bp DNA ladder in three steps gradient pattern as an example, the relative standard deviations of migration times are respectively less than 0.53% and 3.1% in six consecutive injections in one channel and in different channels. The migration of DNA fragments in gradient mode is shown to be similar to that for the isocratic scheme, allowing the design of each step to be made in reference to existing knowledge. These promising results indicate the great potential of this stepwise gradient method for the analysis of DNA by microchip electrophoresis, offering both high resolution and good reproducibility.     

Genetic polymorphism of 13 non‐CODIS STR loci in three national populations from China

The aim of this study was to investigate a 13 non‐CODIS STR loci database using three national populations from China. A new multiplex PCR system that simultaneously amplified 13 loci in the same PCR reaction was developed. This multiplex system included the 13 STR markers (D3S2402, D3S2452, D3S1766, D3S4554, D3S2388, D3S3051, D3S3053, D4S2364, D4S2404, AC001348A, AC001348B, D17S975, and D17S1294), which were successfully analyzed by using 441 DNA samples from three national populations in China (154 Mongol, 177 Kazakh, and 110 Uigur). Allele frequencies and mutation rates of the 13 non‐CODIS STR loci were investigated. A total of 4–10 alleles at each locus were observed and altogether 84, 88, and 87 alleles for the all selected loci were found in the Mongol, Kazakh, and Uigur, respectively. Eight mutations were detected from the 13 selected loci in 9880 meioses in kinship cases. These results indicate that this multiplex system may provide significant polymorphic information for kinship testing and relationship investigations.     

Electric field gradients and band sharpening in DNA gel electrophoresis

A mathematical study of the effect of non-uniform electric fields on the width of DNA electrophoretic bands is presented. Using a simple model, we show that field gradients sharpen these bands during an experiment if the corresponding gradient of electrophoretic velocity is large enough. This is in agreement with experimental results indicating that narrower bands form when pulsed field electrophoresis is carried out in the presence of field gradients. Moreover, it is shown that there is in fact an optimal experimental duration that maximizes separation. Finally, gradients are also predicted to reduce the relative mobilities of the DNA fragments, which is a serious drawback of this technique.