Synthesis and pharmacokinetics of 1 alpha-hydroxyvitamin D3 tritiated at 22 and 23 positions showing high specific radioactivity

A novel synthesis of a radioactive compound of 1 alpha-hydroxyvitamin D3 (1 alpha OHD3) (1) and its pharmacokinetics are described. Radioactive 1 alpha OHD3 tritiated at 22 and 23 positions ([22,23-(3)H4]1 alpha OHD3) (5) was prepared via key reactions of the reduction of acetylenic side chain in the ketone (12) with tritium gas in the presence of palladium-charcoal and the subsequent Wittig reaction with the A-ring synthon (16). [22,23-(3)H4]1 alpha OHD3 (5) showed high specific radioactivity (111.5 Ci/mmol) and was used successfully in pharmacokinetics studies with rats. In the pharmacokinetics studies, the plasma concentration level of the active form of vitamin D3, 1 alpha,25-dihydroxy-vitamin D3 [1 alpha,25(OH)2D3], after oral or intravenous administration of [22,23-(3)H4]1 alpha OHD3 (5), showed longer half-life, lower maximum concentration, and lower area under the curve than those after treatment of 1 alpha,25(OH)2D3 tritiated at 26 and 27 positions (4). These results might suggest a beneficial therapeutic utility of 1 alpha OHD3 (1) over the treatment of 1 alpha,25(OH)2D3 (2).     

N,1-(15)N2]-2'-deoxyadenosines

[reaction: see text] An efficient route to deoxyadenosine derivatives labeled on both the amino group and nitrogen 1 is uncovered. First, 3',5'-di-O-acetyl-2'-deoxy-1-(2-nitrobenzenesulfonyl)inosine (2a) and only 1.1 equiv of (15)NH4Cl are used for labeling position 1 (1a) through the isolation of the open intermediate and its cyclization with DBU in anhydrous CH3CN. Inosine 1a is then converted to [N,1-(15)N2]-3',5'-di-O-acetyl-N6-benzoyl-2'-deoxyadenosine (5a, the precursor of 6a) via a Pd/dppf-catalyzed chloride-to-benzamide replacement, by using again only 1.1 equiv of the labeling source.     

Cleavable biotin probes for labeling of biomolecules via azide-alkyne cycloaddition

The azide-alkyne cycloaddition provides a powerful tool for bio-orthogonal labeling of proteins, nucleic acids, glycans, and lipids. In some labeling experiments, e.g., in proteomic studies involving affinity purification and mass spectrometry, it is convenient to use cleavable probes that allow release of labeled biomolecules under mild conditions. Five cleavable biotin probes are described for use in labeling of proteins and other biomolecules via azide-alkyne cycloaddition. Subsequent to conjugation with metabolically labeled protein, these probes are subject to cleavage with either 50 mM Na(2)S(2)O(4), 2% HOCH(2)CH(2)SH, 10% HCO(2)H, 95% CF(3)CO(2)H, or irradiation at 365 nm. Most strikingly, a probe constructed around a dialkoxydiphenylsilane (DADPS) linker was found to be cleaved efficiently when treated with 10% HCO(2)H for 0.5 h. A model green fluorescent protein was used to demonstrate that the DADPS probe undergoes highly selective conjugation and leaves a small (143 Da) mass tag on the labeled protein after cleavage. These features make the DADPS probe especially attractive for use in biomolecular labeling and proteomic studies.     

Simplification of protein NOESY spectra using bioorganic precursor synthesis and NMR spectral editing

A novel method is proposed for the analysis of protein NOEs in solution. In this approach, chemically synthesized precursor compounds for the amino acids valine, leucine, and isoleucine are used for amino acid specific labeling of these hydrophobic residues. The methodology is based on a novel synthetic route to 12C,1H,2H Val, Leu, and Ile side chains selectively labeled with 13CH3 only at the terminal methyl group. In an otherwise 12C,1H labeled protein, discrimination between protons bound to 12C and 13C (or 15N) can be achieved using standard isotope-editing NMR pulse schemes. This strategy significantly relieves problems with spectral overlap through selective observation of interresidue methyl NOEs and will thus be a powerful extension of existing biomolecular NMR methodology.     

In vivo distributions of 111In and/or 3H labeled lymphocyte in C3H/He mouse (author's transl)

Although 99mTc and 51Cr have been used for lymphocyte labeling, these radionuclides have several disadvantages for study on immunological behaviour of lymphocyte; very high rate elution and low labeling efficiency for both radionuclides, and short half life for 99mTc. Indium-111 has quite suitable physical properties for clinical nuclear medicine, i.e. desirable photon energy (247,173 keV) and 2.8 day half life. 111In-oxine is lipid soluble and is known to pass through the cell membrane and attaches firmly to cytoplasmic component of the cell. On the other hand, 3H-thymidine is well known substance which incorporated to nucleic acid in the cell. In this study, distribution patterns of 111In-oxine and/or 3H-thymidine labeled lymphocyte in C3H/He mice were examined and the suitability of 111In-oxine labeled lymphocyte for radionuclide imaging in vivo was discussed. Thirty minutes after intravenous injection of 3H and/or 111In labeled lymphocyte, about 12% of lymphocyte were found in the lungs and rest of them were distributed mainly in the blood, kidneys and liver. After 24 hours the activity in the lung decreased markedly and the activity in the liver and kidneys increased with time. Between lymphocyte labeled with 111In-oxine and 3H-thymidine, there is not so much differences in terms of distribution patterns. From this study, it is concluded that the 111In-oxine labeled lymphocyte distributes in the same way as 3H labeled one, in spite of different labeling sites. This 111In-oxine labeling method can be used as a useful tool of radionuclide imaging in kinetic studies of lymphocyte in vivo.     

Copper complexes of new benzodioxotetraaza macrocycles with potential applications in nuclear medicine

Two novel benzodioxotetraaza macrocycles [2,9-dioxo-1,4,7,10-tetraazabicyclo[10.4.0]1,11-hexadeca-1(11),13,15-triene (H2L1) and 2,10-dioxo-1,4,8,11-tetraazabicyclo[11.4.0]1,12-heptadeca-1(12),14,16-triene (H2L2)] were synthesized by a [1 + 1] crablike cyclization. The protonation constants of both ligands were determined by 1H NMR titration and by potentiometry at 25.0 degrees C in 0.10 M ionic strength in KNO3. The latter method was also used to ascertain the stability constants of their copper(II) complexes. These studies showed that the CuL1 complex has a much lower thermodynamic stability than the CuL2, and the H2L2 displays an excellent affinity for copper(II), due to the good fit of copper(II) into its cavity. The copper complexes of the novel ligands were characterized by electronic spectroscopy in solution and by crystal X-ray diffraction. These studies indicated that the copper center in the CuL1 complex adopts a square-pyramidal geometry with the four nitrogen atoms of the macrocycle forming the equatorial plane and a water molecule at axial position, and the copper in the CuL2 complex is square-planar. Several labeling conditions were tested, and only H2L2 could be labeled with 67Cu efficiently (>98%) in mild conditions (39 degrees C, 15 min) to provide a slightly hydrophilic radioligand (log D = -0.19 +/-0.03 at pH 7.4). The in vitro stability was studied in the presence of different buffers or with an excess of diethylenetriamine-pentaethanoic acid. Very high stability was shown under these conditions for over 5 days. The incubation of the radiocopper complex in human serum showed 6% protein binding.     

Monovalent ion adsorption at the muscovite (001)-solution interface: relationships among ion coverage and speciation, interfacial water structure, and substrate relaxation

The interfacial structure between the muscovite (001) surface and aqueous solutions containing monovalent cations (3 × 10(-3) m Li(+), Na(+), H(3)O(+), K(+), Rb(+), or Cs(+), or 3 × 10(-2) m Li(+) or Na(+)) was measured using in situ specular X-ray reflectivity. The element-specific distribution of Rb(+) was also obtained with resonant anomalous X-ray reflectivity. The results demonstrate complex interdependencies among adsorbed cation coverage and speciation, interfacial hydration structure, and muscovite surface relaxation. Electron-density profiles of the solution near the surface varied systematically and distinctly with each adsorbed cation. Observations include a broad profile for H(3)O(+), a more structured profile for Li(+) and Na(+), and increasing electron density near the surface because of the inner-sphere adsorption of K(+), Rb(+), and Cs(+) at 1.91 ± 0.12, 1.97 ± 0.01, and 2.26 ± 0.01 ?, respectively. Estimated inner-sphere coverages increased from ~0.6 to 0.78 ± 0.01 to ~0.9 per unit cell area with decreasing cation hydration strength for K(+), Rb(+), and Cs(+), respectively. Between 7 and 12% of the Rb(+) coverage occurred as an outer-sphere species. Systematic trends in the vertical displacement of the muscovite lattice were observed within ~40 ? of the surface. These include a <0.1 ? shift of the interlayer K(+) toward the interface that decays into the crystal and an expansion of the tetrahedral-octahedral-tetrahedral layers except for the top layer in contact with solution. The distortion of the top tetrahedral sheet depends on the adsorbed cation, ranging from an expansion (by ~0.05 ? vertically) in 3 × 10(-3)m H(3)O(+) to a contraction (by ~0.1 ?) in 3 × 10(-3) m Cs(+). The tetrahedral tilting angle in the top sheet increases by 1 to 4° in 3 × 10(-3) m Li(+) or Na(+), which is similar to that in deionized water where the adsorbed cation coverages are insufficient for full charge compensation.     

Synthesis of group 1 metal 2,6-diphenylphenoxide complexes [M(OC6H3Ph2-2,6)] (M = Li,Na, K,Rb, Cs) and structures of the solvent-free complexes [Rb(OC6H3Ph2-2,6)]x and [Cs(OC6H3Ph2-2,6)x: one-dimensional extended arrays of metal aryloxides

Reaction of 2,6-diphenylphenol (HOC(6)H(3)Ph(2)-2,6) with (n)BuLi, NaH, KH, or Rb or Cs metal in benzene gives the solvent-free complexes [M(OAr)]x in excellent yield. The complex [Rb(OC(6)H(3)Ph(2)-2,6)](x)() exhibits a ladderlike structure in the solid state with triply bridging oxygen atoms and Rb-O distances of 2.743(3), 2.930(2), and 2.973(2) A. The Rb cations interact with the pi-electron cloud of the arene moieties, giving rise to a high Rb coordination number. The cesium-containing congener forms a layered, columnlike structure consisting of [Cs(2)(mu(2)-OAr)(2)] units, with nearly identical Cs-O distances of 2.945(2) and 2.947(2) A. The individual layers are held together solely by Cs-arene pi-interactions.     

NMR confirmation that tryptophan dehydrogenation occurs with syn stereochemistry during the biosynthesis of CDA in Streptomyces coelicolor

Doubly labeled (2'S,3'R)-[3'-2H1,13C1]-tryptophan was fed to the Trp-His auxotrophic Streptomyces coelicolor strain WH101. Mass spectrometry showed single and double incorporation of the labeled Trp into the calcium-dependent lipopeptide antibiotic (CDA4a). From 13C NMR spectroscopy, it was apparent that the C3'-signal of the (Z)-2',3'-dehydrotryptophan (position 11 in CDA4) was a 1:1:1 triplet indicating that the deuterium atom in the pro-R position of the methylene group is retained during Trp-oxidation. This provides definitive proof that Trp dehydrogenation occurs through the loss of the 2' and pro-3'S hydrogen atoms with overall syn stereochemistry.     

Analysis of phase transition pathways in X3H(SO4)2 (X=Rb, NH4, K, Na): variable temperature single-crystal X-ray diffraction studies

Evaluation of phase transitions in a series of hydrogen sulfates (Rb3H(SO4)2, (NH4)3H(SO4)2, K3 H(SO4)2, and Na3H(SO4)2) based on the single-crystal structure analysis has revealed the exact nature of such transitions and has sorted out the various ambiguities involved in earlier literature. Rb3H(SO4)2 at 293 K is C2/c. It is isostructural to its ammonium analogue, (NH4)3H(SO4)2, at room temperature. However, the variable temperature single-crystal diffraction studies indicate that the phase transition mechanism is different. When cooled to 100 K, the structure of Rb3H(SO4)2 remains C2/c. When heated to 350 K, it transforms to C2/m (with double the volume at room temperature), which changes to C2/c (with 4 times the volume at room temperature) at 425 K. The high-temperature (420 K) structural phase transition in (NH4)3H(SO4)2 is shown to be Rm. The structure of Na3H(SO4)2 remains invariant (P21/c) throughout the range of 100-500 K except for the usual contraction of the unit cell at 100 K and expansion at 500 K. The structural phase transitions with temperature for the compound K3H(SO4)2 are very different from those claimed in earlier literature. The hydrogen atom participating in the crucial hydrogen bond joining the two sulfate tetrahedra controls the structural phase transitions at low temperatures in all four compounds. The distortion of the SO4 tetrahedra and the coordination around the metal atom sites control the phase evolution in the Rb compound, while the Na and K analogues show no phase transitions at high temperature, and the NH4 system transforms to a higher symmetry space group resulting in a disorder of the sulfate moiety.     

7-甲氧基香豆素-3-羧酸-N-琥珀酰亚胺酯用于神经肽的标记与分析

选用7-甲氧基香豆素-3-羧基-N-琥珀酰亚胺酯(MCSE)作为衍生试剂, 并借助高效液相色谱和质谱等仪器对甲硫脑啡肽、亮脑啡肽和神经紧张素等3种神经肽进行了标记与分析.     

Singularity of proton transport in salts of orthoperiodic and orthotellurium acids: theoretical modeling using density functional calculations

Density functional B3LYP calculations have been performed to investigate proton transport in orthoperiodic and orthotellurium acids, their salts MIO(6)H(4)(M = Li, Rb, Cs) and CsH(5)TeO(6), dimers of the salt*acid type MIO(6)H(4)*H(5)IO(6)(M = Rb, Cs), CsIO(6)H(4)*H(6)TeO(6), CsHSO(4)*H(6)TeO(6), Cs(2)SO(4)*H(6)TeO(6), and also in double-substituted and binary salts Rb(2)H(3)IO(6) and Rb(4)H(2)I(2)O(10). It has been shown that the energy of salt dimerization is 33-35 kcal mol(-1) and the activation barrier for proton migration between the neighboring octahedrons of the salt*acid --> acid*salt type is calculated to be 3-13 kcal mol(-1). The activation energy of the proton migration along the octahedron, 20-30 kcal mol(-1), is comparable with the barrier for water molecule separation. Quantum-chemical calculations correlate with the results of X-ray and electrochemical studies.     

Studies on absorption, distribution, excretion and metabolism of ginseng saponins. VII. Comparison of the decomposition modes of ginsenoside-Rb1 and -Rb2 in the digestive tract of rats.

In order to clarify some similarities and differences of decomposition modes between 20(S)-protopanaxadiol (20(S)-ppd) saponins, represented by ginsenoside Rb1 (Rb1) and ginsenoside Rb2 (Rb2), the decompositions of Rb1 and Rb2 in the rat gastrointestinal tract, 0.1 N HCl and crude hesperidinase were investigated in detail. As in the case of Rb2 reported previously, Rb1 was hydrolyzed to 20(R,S)-ginsenoside Rg3 in 0.1 N HCl. On the other hand, hydroperoxidation of Rb1 occurred in rat stomach; the major hydroperoxide was separated and identified as the 25-hydroperoxy-23-ene derivative of Rb1 (VIII) by 1H- and 13C-nuclear magnetic resonance and fast atom bombardment mass spectrometry. The decomposition modes of 20(S)-ppd saponins (Rb1 and Rb2) differed from that of 20(S)-protopanaxatriol saponin (Rg1) in rat stomach. In rat large intestine, five decomposition products of Rb1 were observed by thin-layer chromatography, and these were identified as gypenoside XVII (G-XVII), ginsenoside Rd (Rd), ginsenoside F2 (F2), compound K (C-K) and VIII. The decomposition modes of Rb1 and Rb2, both 20(S)-ppd saponins, are considered to be different because of the hydrolysis rate in the terminal sugar moiety at the C-20 hydroxyl group in the rat large intestine. Using crude hesperidinase, Rb1 was decomposed to G-XVII, F2 and C-K, and Rb2 was decomposed to 3-O-beta-D-glucopyranosyl-20-O-[alpha-L-arabinopyranosyl(1----6)-b eta-D- glucopyranosyl]-20-(S)-ppd, F2 and C-K. Consequently, it appears that hydrolysis by beta-glucosidase, which is present in the rat large intestine, is distinct from that by crude hesperidinase.(ABSTRACT TRUNCATED AT 250 WORDS)     

Periodic trends in hexanuclear actinide clusters

Four new Th(IV), U(IV), and Np(IV) hexanuclear clusters with 1,2-phenylenediphosphonate as the bridging ligand have been prepared by self-assembly at room temperature. The structures of Th(6)Tl(3)[C(6)H(4)(PO(3))(PO(3)H)](6)(NO(3))(7)(H(2)O)(6)·(NO(3))(2)·4H(2)O (Th6-3), (NH(4))(8.11)Np(12)Rb(3.89)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(24)·15H(2)O (Np6-1), (NH(4))(4)U(12)Cs(8)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(24)·18H(2)O (U6-1), and (NH(4))(4)U(12)Cs(2)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(18)·40H(2)O (U6-2) are described and compared with other clusters of containing An(IV) or Ce(IV). All of the clusters share the common formula M(6)(H(2)O)(m)[C(6)H(3)(PO(3))(PO(3)H)](6)(NO(3))(n)((6-n)) (M = Ce, Th, U, Np, Pu). The metal centers are normally nine-coordinate, with five oxygen atoms from the ligand and an additional four either occupied by NO(3)(-) or H(2)O. It was found that the Ce, U, and Pu clusters favor both C(3i) and C(i) point groups, while Th only yields in C(i), and Np only C(3i). In the C(3i) clusters, there are two NO(3)(-) anions bonded to the metal centers. In the C(i) clusters, the number of NO(3)(-) anions varies from 0 to 2. The change in the ionic radius of the actinide ions tunes the cavity size of the clusters. The thorium clusters were found to accept larger ions including Cs(+) and Tl(+), whereas with uranium and later elements, only NH(4)(+) and/or Rb(+) reside in the center of the clusters.     

Ile, Leu, and Val methyl assignments of the 723-residue malate synthase G using a new labeling strategy and novel NMR methods

New NMR experiments are presented for the assignment of methyl (13)C and (1)H chemical shifts from Ile, Leu, and Val residues in high molecular weight proteins. The first class of pulse schemes transfers magnetization from the methyl group to the backbone amide spins for detection, while the second more sensitive class uses an "out-and-back" transfer scheme in which side-chain carbons or backbone carbonyls are correlated with methyl (13)C and (1)H spins. Both groups of experiments benefit from a new isotopic labeling scheme for protonation of Leu and Val methyl groups in large deuterated proteins. The approach makes use of alpha-ketoisovalerate that is (13)C-labeled and protonated in one of its methyl groups ((13)CH(3)), while the other methyl is (12)CD(3). The use of this biosynthetic precursor leads to production of Leu and Val residues that are (13)CH(3)-labeled at only a single methyl position. Although this labeling pattern effectively reduces by 2-fold the concentration of Leu and Val methyls in NMR samples, it ensures linearity of Val and Leu side-chain (13)C spin-systems, leading to higher sensitivity and, for certain classes of experiments, substantial simplification of NMR spectra. Very near complete assignments of the 276 Ile (delta 1 only), Leu, and Val methyl groups in the single-chain 723-residue enzyme malate synthase G (MSG, molecular tumbling time 37 +/- 2 ns at 37 degrees C) have been obtained using the proposed isotopic labeling strategy in combination with the new NMR experiments.     

New layered uranium phosphate fluorides: syntheses, structures, characterizations, and ion-exchange properties of A(UO2)F(HPO4).xH2O (A = Cs+, Rb+, K+; x = 0-1)

Single crystals of three new layered uranium phosphate fluorides, A(UO2)F(HPO4).xH2O (A = Cs+, Rb+, and K+; x = 0-1) have been synthesized by hydrothermal reactions using UO3, H3PO4, HF, and corresponding alkali metal halides as reagents. Although all three new materials have layered structures, each of them contains different structural motifs within the layer. While Cs(UO2)F(HPO4).0.5H2O and Rb(UO2)F(HPO4) reveal noncentrosymmetric crystal structures, K(UO2)F(HPO4).H2O crystallizes in a centrosymmetric space group. In addition, the ion-exchanged phases for all three materials are highly crystalline. Crystal data: Cs(UO2)F(HPO4).0.5H2O, orthorhombic, space group Pca21 (No. 29), with a = 25.656(5) A, b = 6.0394(12) A, c = 9.2072(18) A, and Z = 4; Rb(UO2)F(HPO4), orthorhombic, space group Cmc21 (No. 36), with a = 17.719(4) A, b = 6.8771(14) A, c = 12.139(2) A, and Z = 8; K(UO2)F(HPO4).H2O, monoclinic, P21/n (No. 14), with a = 6.7885(14) A, b = 8.7024(17) A, c = 12.020(2) A, beta = 94.09(3), and Z = 4.     

Synthesis of deuterium-labeled 16 alpha,19-dihydroxy C19 steroids as internal standards for gas chromatography-mass spectrometry.

[2 beta,7,7,16 beta-2H4]16 alpha,19-Dihydroxyandrost-4-ene-3,17-dione (14) and [7,7,16 beta-2H3]3 beta,16 alpha,19-trihydroxyandrost-5-en-17-one (16), with high isotopic purity, respectively, were synthesized from unlabeled 3 beta-(tert-butyldimethylsiloxy)-androst-5-ene-17 beta-yl acetate (1). The deuterium introduction at C-7 was carried out by reductive deoxygenation of the 7-keto compound 3 with dichloroaluminum deuteride and that at C-2 beta and/or C-16 beta by controlled alkaline hydrolysis of 16-bromo-17-ketone 11 or 12 with NaOD in D2O and pyridine. [7,7-2H2]3 beta-Hydroxyandrost-5-en-17-one (6), obtained from compound 1 by a five-step sequence, was converted to compound 14 or 16 by an eight-step or seven-step sequence, respectively. The labeled steroids 14 and 16 are useful as internal standards for gas chromatography-mass spectrometry analysis of the endogenous levels.     

Use of isotope mass probes for metabolic analysis of the jasmonate biosynthetic pathway

In order to quantitatively study the jasmonate biosynthetic pathway, we chemically synthesized a pair of isotope mass probes and established a labeling protocol. The pair of mass probes used in our work were ω-bromoacetonylpyridinium bromide (BPB) and d(5)-ω-bromoacetonylpyridinium bromide (d(5)-BPB), which contain carboxylic acid reactive groups, isotopically labeled groups and permanent positive charges. High performance liquid chromatography (HPLC) and electrospray ionization quadrupole-time of flight mass spectrometry (ESI-QTOF-MS) were used for the detection of labeled standard mixtures and plant samples. In comparison to negative mode electrospray ionization detection of unlabeled analytes, the ESI signal of reverse charge labeled compounds was shown to improve by 20- to 80-fold. Accurate relative quantification was achieved as no isotopic effects of the different isotope labeled phytohormones during RP/SCX mixed-mode liquid chromatographic separation were observed. A data analysis method was established for analyzing metabolic pathways using our labeling strategy. We then applied our method and examined the jasmonate biosynthetic pathway of rice under salt stress and the premature senescence mutant. Here we found that under salt stress conditions, rice showed up-regulation in (13S)-hydroperoxyoctadecatrienoic acid (HOPT), cis-(+)-12-oxophytodienoic acid (OPDA), 3-oxo-2-(2'-pentenyl)-cyclopentane-1-octanoic acid (OPC-8) and jasmonoyl-valine (JA-Val) levels, while α-linolenic acid (LA) and jasmonic acid (JA) showed down-regulation, and three components (HPOT, OPC-8 and JA-Val) were accumulated. The premature senescence mutant showed up-regulation in all major components of the jasmonate biosynthetic pathway with the exception of LA, and an accumulation of HPOT, OPC-6 and JA-Val. This study demonstrates that our chemical stable isotope labeling strategy can be used as a powerful tool for metabolic pathway analysis of phytohormones in plants.     

New rubidium zinc hydrogen phosphate,Rb2Zn2(HPO4)3: synthesis,crystal structure,and 31P single-crystal NMR

A new rubidium zinc hydrogen phosphate, Rb2Zn2(HPO4)3, is prepared by an unusual method utilizing long nucleation times. This material is crystallized from a gel with an initial composition of 1.0 ZnO/0.94 P2O5/0.96 Rb2O/0.04 Li2O/41 H2O, while the phosphate concentration equals 1.6 M and pH = 3.5. The gel is placed in a sealed Pyrex flask at 52 degrees C, and after 4.5 months crystallization of Rb2Zn2(HPO4)3 is noticed. This new crystalline compound has a three-dimensional framework structure built from spiral chains of alternating PO4 and ZnO4 tetrahedra connected pairwise and assembled by other PO4 tetrahedra, rubidium ions, and hydrogen bonds. The two rubidium ions, Rb(1) and Rb(2), have an exceptionally low number of oxygen contacts in the first coordination sphere, five and seven, respectively. Crystal data: monoclinic, P2(1)/c (no. 14), a = 12.5880(4), b = 12.7170(8), c = 7.5827(8) A, beta = 96.100(1) degrees, Z = 4. A single-crystal 31P NMR investigation of Rb2Zn2(HPO4)3 was performed employing a two-axis goniometer probe and reveals the presence of three chemically and six magnetically nonequivalent phosphorus sites, in accordance with the crystal structure. 31P chemical shielding anisotropies and isotropic chemical shifts (-3.3(3), -2.6(3), and 2.0(3) ppm) have been determined for the three phosphorus sites.     

Tuning of inter- versus intrachain magnetic interactions in cyano-bridged Ni(II)/M(III) (M = Cr, Fe, Co) chain complexes

The reaction of [M(CN)6]3- (M = Cr3+, Fe3+, Co3+) with the nickel(II) complex of 2,4-diamino-1,3,5-triazin-6-yl-{3-(1,3,5,8,12-pentaazacyclotetradecane)} ([NiL]2+) in excess of ANO3 or ACl (A = Li+, Na+, K+, Rb+, Cs+, NH4+) leads to the cyano-bridged dinuclear assemblies A{[NiL][M(CN)6]}.xH2O (x = 2-5). X-ray structures of Li{[NiL][Cr(CN)6]}.5H2O, NH4{[NiL][Cr(CN)6]}.3.5H2O, K{[NiL][Cr(CN)6]}.4H2O, K{[NiL][Fe(CN)6]}.4H2O, Rb{[NiL][Fe(CN)6]}.3.5H2O, and Cs{[NiL][Fe(CN)6]}.3.5H2O, as well as the powder diffractometry of the entire Fe(III) series, are reported. The magnetic properties of the assemblies are dependent on the monocation A and discussed in detail. New efficient pathways for ferromagnetic exchange between Ni(II) and Fe(III) or Cr(III) are demonstrated. Field dependencies of the magnetization for the Fe(III) samples at low temperature and low magnetic field indicate a weak interchain antiferromagnetic coupling, which is switched to ferromagnetic coupling at increasing magnetic field (metamagnetic behavior). The interchain magnetic coupling can be tuned by the size of the A cations.