4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole as chemilumigenic reagent for high performance liquid chromatographic peroxyoxalate chemiluminescence detection

4-(N,N-Dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F), presented as a fluorogenic labelling reagent for amines and amino acids, is preferred for peroxyoxalate chemiluminescence (PO-CL) detection in high performance liquid chromatography. Amino acids and epinephrine derivatized with DBD-F were separated on a reversed phase column and detected at the femtomole level by the PO-CL detection system.     

Use of 4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole as a labelling reagent for peroxyoxalate chemiluminescence detection and its application to the determination of the beta-blocker metoprolol in serum by high-performance liquid chromatography.

Fluorogenic reagents having a benzofurazan moiety, viz., 4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F), 7-fluoro-4-nitro-2,1,3-benzoxadiazole and 4-(aminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole, were compared for the sensitive analysis of their derivatives by high-performance liquid chromatography with peroxyoxalate chemiluminescence detection. Of the proline derivatives, DBD-proline was the most sensitive with a detection limit of 2 fmol. The optimum concentrations of bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate and H2O2 for the post-column reaction were 0.5 and 75 mmol dm-3 respectively and amino acids and beta-blockers derivatized with DBD-F were detected in the range 0.2-40 fmol (signal-to-noise ratio = 3) using the proposed method. The lower detection limit of metoprolol (a beta-blocker having an isopropylamino group) spiked in serum was 0.8 ng ml-1 using 20 microl of serum (signal-to-noise ratio = 5).     

Evaluation of pyrimido[5,4-d]pyrimidine derivatives as peroxyoxalate chemiluminescence reagents using a flow injection system

Eighteen kinds of pyrimido[5,4-d]pyrimidines together with several commercially available fluorescent compounds such as perylene, Rhodamine B, etc., were evaluated as the reagents for a peroxyoxalate chemiluminescence (CL) detection system by using a flow injection method. The peroxyoxalate CL reaction employed consists of bis(2,4,6-trichlorophenyl)oxalate, hydrogen peroxide, triethylamine, and a fluorophore. Under the conditions used, 2,6-bis[di-(2-hydroxyethyl)amino]-4,8- dipiperidinopyrimido[5,4-d]pyrimidine (Dipyridamole) and 2,4,6,8-tetrathiomorpholinopyrimido[5,4-d]pyrimidine (1i) gave very intense chemiluminescence intensities which were larger than those of any other commercially available fluorescent compounds tested (e.g., 10 times larger than that of perylene).     

Mechanistic Studies on the Salicylate-Catalyzed Peroxyoxalate Chemiluminescence in Aqueous Medium

The peroxyoxalate reaction is one of the most efficient chemiluminescence transformations known and the only system occurring by an intermolecular chemically initiated electron exchange luminescence (CIEEL) mechanism with confirmed high quantum yields. The peroxyoxalate chemiluminescence (PO-CL) is mainly studied in anhydrous organic medium; however, for bioanalytical application, it should be performed in aqueous media. In the present work, we study the peroxyoxalate system in a binary 1,2-dimethoxyethane/water mixture with bis(2,4,6-trichlorophenyl) oxalate (TCPO), bis(4-methylphenyl) oxalate (BMePO) and bis[2-(methoxycarbonyl)phenyl] oxalate (DMO), catalyzed by sodium salicylate, in the presence of rhodamine 6G as activator. Reproducible kinetic results are obtained for all systems; emission decay rate constants depend on the salicylate as well as hydrogen peroxide concentration, and the occurrence of a specific base catalysis is verified. Although singlet quantum yields determined are lower than in anhydrous media in comparable conditions, they are still considerably high and adequate for analytical applications. The highest singlet quantum yields are obtained for the “ecologically friendly” derivative DMO indicating that this derivative might be the most adequate substrate for the use of the peroxyoxalate system in bioanalytical applications.     

Sensitive detection of oxo-steroids and oxo-bile acids by liquid chromatography with peroxyoxalate chemiluminescence detection

Oxo-steroids and oxo-bile acid ethyl esters were derivatized with 5-N,N-dimethylamino-naphthalene-1-sulphonohydrazide (DNS-hydrazine) to DNS-hydrazone in the presence of hydrochloric acid in ethanol or trifluoroacetic acid in benzene, purified by high-performance gel-permeation chromatography, separated on an ODS column with an eluent containing tetrahydrofuran and detected via a peroxyoxalate chemiluminescence reaction using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate (TDPO). Sensitive detection (femtomole level) of each oxo-steroid which appeared as a single peak was achieved. The procedure for the isolation of oxo-bile acids developed for GC-MS allowed the detection by this system of an unusual oxo-bile acid, 7α-hydroxy-3-oxo-5β-cholanic acid, at the nanomole l^?1 level in urine from a patient with cholestatic liver disease.     

High performance liquid chromatography post-column chemiluminescence determination of sulfonamide residues in milk at low concentration levels using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate as chemiluminescent reagent

The determination of seven sulfonamides by means of HPLC with chemiluminescence detection is proposed for the first time. The analytes are derivatized with fluorescamine, separated and subsequently they participate in the post-column chemiluminescence (CL) peroxyoxalate system using imidazole as a catalyst. Among the different peroxyoxalates tested, bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate provides higher sensitivities and stabilities, avoiding precipitation problems. A rigorous optimization of the significant variables by means of experimental designs has been developed in order to reconcile the chromatographic conditions with the CL reaction. The method provides detection limits in the low microgl(-1) range and has been satisfactorily applied to the analysis of spiked raw milk samples.     

Analysis of a biopolymer by capillary electrophoresis with a chemiluminescence detector using a polymer solution as the separation medium.

We developed capillary electrophoresis with a chemiluminescence detector using a polymer solution as the separation medium for the analysis of biopolymers, such as DNA and protein. A peroxyoxalate chemiluminescence reagent of bis(2,4,6-trichlorophenyl)oxalate was used together with fluorescein-labeling reagent. When a migration buffer solution containing carboxylmethylcellulose was used, the flow-type chemiluminescence detection cell was found to give a better resolution than the batch-type one. Fluorescein-labeled adenosine triphosphate of 1.0 x 10(-4) M was examined by means of capillary electrophoresis with absorption (260 nm), fluorescence (ex. 496 nm and em. 517 nm), and chemiluminescence detectors. The chemiluminescence detection showed the highest sensitivity among them; the S/N ratios obtained by absorption, fluorescence, and chemiluminescence detections were 4, 38, and 130, respectively. Fluorescein-labeled DNA was prepared through a polymerase chain reaction using fluorescein-labeled deoxyadenosine triphosphate. A mixture of the labeled DNA fragments (500, 600, 700, 800, 900, and 993 bp) was successfully separated and detected by the present system. A mixture of proteins (lysozyme, cytochrome C, and ribonuclease A) which were labeled with fluorescein isothiocyanate was also separated and detected.     

Evaluation of fluorescent compounds for peroxyoxalate chemiluminescence detection

The behaviour of 19 fluorescent compounds of various types in peroxyoxalate chemiluminescence reactions was studied in terms of the relation of their excitation efficiency to their singlet excitation energy and oxidation potential. Compounds having low singlet excitation energy and low oxidation potential were excited effectively. As a result of the study, 3-aminoperylene was selected as a fluorophore for derivatization of simple car?ylic acids. The derivatives were separated by reversed-phase microbore h.p.l.c. and were detected by a peroxyoxalate chemiluminescence reaction detector. The detection limit was 0.1 fmol.     

A new sensitive determination method of estradiol in plasma using peroxyoxalate ester chemiluminescence combined with an HPLC system

A new sensitive determination method of estradiol in a plasma sample using peroxyoxalate ester chemiluminescence was developed. Estradiol, which was extracted by liquid-liquid extraction using ethyl acetate from plasma, was derivatized with dansyl-chloride (DNS-Cl) and separated by reverse-phase HPLC. The performance of four oxalates, bis(trichlorophenyl)oxalate (TCPO), bis(2,4-dinitrophenyl)oxalate (DNPO), bis(pentafluorophenyl)oxalate (PFPO), and bis[4-nitro-2-(3,6, 9-trioxadecyloxycarbonyl)phenyl] oxalate (TDPO), were evaluated using the static system, and DNPO was found to have the most sensitive and stable chemiluminescence at a H(2)O(2) concentration of 30 mM. HPLC-chemiluminescence system using DNPO for the determination of estradiol was established. The detection limit of dansylated-estradiol (DNS-E2) was 15 fmol (4 pg) in the standard solution and 44 fmol (12 pg) in the rat plasma sample at S/N = 3.     

High-performance liquid chromatography/chemiluminescence determination of biological thiols with N-[4-(6-dimethylamino-2-benzofuranyl)phenyl]maleimide

The peroxyoxalate chemiluminescence detection of biological thiols combined with high-performance liquid chromatography (HPLC) is described. SH groups of the thiol compounds including glutathione (GSH), cysteine, N-acetylcysteine, cysteamine, and D-penicillamine were labelled with N-[4-(6-dimethylamino-2-benzofuranyl)phenyl]maleimide (DBPM), a specific fluorogenic reagent for SH group. The labelling reaction was carried out at 60 degrees C for 30 min and at pH 8.5 and a sample of the resulting reaction mixture was subjected to HPLC. Five kinds of labelled thiols were separated within 12 min on ODS-80 column (150 x 4.6 mm ID; 5 microns) and detected in the ranges from 500 fmol to 2 pmol/100 microL (cysteamine and N-acetylcysteine), to 3 pmol/100 microL (cysteine) and to 5 pmol/100 microL (GSH and D-penicillamine). The lower detection limits were from 7 fmol (cysteamine) to 113 fmol (GSH) per 100 microL (S/N = 2). The method was applied to the determination of thiols in a rat liver. The amounts of glutathione and cysteine were 1.23 +/- 0.15 mumol/g (n = 5) and 0.15 +/- 0.04 mumol/g (n = 5), respectively.     

Sensitive and selective determination of glucose in human serum and urine based on the peroxyoxalate chemiluminescence reaction of a new fluorophore

A novel method for simple and sensitive determination of glucose based on the peroxyoxalate chemiluminescence (PO-CL) detection of enzymatically generated H(2)O(2) was investigated. Influence of various experimental parameters on glucose sensing, including the action time of the enzyme, solution pH, interferents and the concentration of CL reagents was investigated. Under the optimum condition, the linear response range of glucose was found to be 2.50×10(-6) to 1.75×10(-4) mol/L, and the detection limit (defined as the concentration that could be detected at the signal-to-noise ratio of 3) was 1.10×10(-6) mol/L. The present method has been used to determine the glucose concentrations in real serum and urine samples with satisfactory results.     

Inhibition of peroxyoxalate chemiluminescence by intercalation of fluorescent acceptors between DNA bases

We have examined the ability of different fluorescent DNA dyes to become chemically excited by the peroxyoxalate chemiluminescent reaction. The intercalating dyes ethidium bromide and propidium iodide, and the bis-intercalating dyes ethidium homodimer-1, benzoxazolium-4-pyridinium dimer-1 and benzoxazolium-4-quinolinium dimer-1, exhibit an intense chemiluminescence when they are excited by the bis(2,4,6-trichlorophenyl)oxalate (TCPO)-H2O2 reaction in the absence of DNA. However, the chemiluminescence of these dyes is very low when they are bound to double-stranded DNA (dsDNA). In contrast, the minor groove-binding dye Hoechst 33258 excited by the TCPO-H2O2 reaction shows approximately the same chemiluminescence intensity when it is free in solution or complexed with dsDNA. Structural alterations or partial dissociation of dsDNA-bis-intercalating dye complexes produced by the addition of acetone, NaCl, MgCl2 or the cationic surfactant cetyltrimethylammonium bromide increases the chemiluminescence intensity. A moderate chemiluminescence intensity is observed when bis-intercalating dyes are complexed with single-stranded DNA. Our results indicate that the energy from the intermediates produced in the peroxyoxalate chemiluminescent reaction cannot be efficiently transferred to fluorescent dyes complexed with DNA; chemiexcitation is almost completely inhibited when dyes are buried in the dsDNA structure by intercalation between the base pairs.     

Studies on the effects of imidazole on the peroxyoxalate chemiluminescence detection system for high performance liquid chromatography

The catalytic effect of bases (imidazole, pyridine, Tris and triethylamine) on the peroxyoxalate chemiluminescence (PO-CL) reaction for high performance liquid chromatography (HPLC) was investigated. Imidazole increased PO-CL intensity extraordinarily, whereas the other bases (pyridine, Tris and triethylamine) did not. The peak heights of dipyridamole (coronary vasodilator) obtained using the eluents containing buffers were largest at pH 7.0, a few times less at pH 6.0 and pH 5.0, 100 times less at pH 4.0 and a few hundred times less at pH 3.0. The eluents containing buffers at pH 3, 4, 5, 6 or 7 each with imidazole increased the peak heights by a few to ten times as compared with those without imidazole, and those peak heights were within one order of magnitude. On the other hand, the eluent containing buffer at pH 2 did not affect the peak heights with or without imidazole. Bis(4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl) oxalate (TDPO) alone and bis(2,4-dinitrophenyl)oxalate (DNPO) plus TDPO were recommended to be used against eluents containing buffers of pH 5-7 and pH 3-4, respectively. Dipyridamole and benzydamine hydrochloride (anti-inflammatory drug) were separated on the ODS column and detected by the present system. The detection limits of dipyridamole and benzydamine hydrochloride were 40 amol and 270 fmol, respectively.     

Procedures for the enhancement of selectivity in liquid phase chemiluminescence detection

An overview of liquid phase chemiluminescence (CL) processes is presented and the potential for CL detection in liquid chromatography (LC) is discussed, with particular reference to the luminol and peroxyoxalate reactions. Post column ion displacement from a solid phase reagent [a cation exchange resin in the copper(II) form] followed by catalysis of the luminol reaction is used for the quantification of mixtures of weak acids after separation by ion-exclusion chromatography. Polyaromatic hydrocarbons (PAHs) released during the combustion of biomass fuels are separated by reversed-phase chromatography and quantified by their sensitizing effect on the peroxyoxalate reaction. This procedure is also used for the determination of carboxylic acids in non-aqueous media after selective pre-column derivatization with a fluorescent label (9-anthracenemethanol).     

Peroxyoxalate chemiluminescence of N,N'-bistosyl-1H,4H-quinoxaline-2,3-dione and related compounds. Dependence on electronic nature of fluorophores

The title compound N,N'-bistosyl-1H,4H-quinoxaline-2,3-dione (TsQD) provides peroxyoxalate chemiluminescence (PO-CL) when reacted with hydrogen peroxide in the presence of fluorophores. The chemiluminescence (CL) efficiency of TsQD was superior to that of other related compounds such as bis(2,4,6-trichlorophenyl) oxalate (TCPO), a typical oxalate for the peroxyoxalate PO-CL, under an aqueous condition. Factors affecting the PO-CL efficiency are discussed from the viewpoint of the structures of the substrates and the electronic nature of the fluorophores. A linear correlation of the logarithmic values evaluated from the CL quantum yields with the oxidation potentials of the aromatic fluorophores supports the involvement of the chemically initiated electron exchange luminescence (CIEEL) mechanism in both TsQD- and TCPO-CL systems. Also, an excellent Hammett relationship was derived from the correlation between the sigma(+) values and the relative singlet excitation yields in TsQD-CL enhanced by a series of fluorescent para,para'-disubstituted distyrylbenzenes.     

A microfluidic chip based sequential injection system with trapped droplet liquid-liquid extraction and chemiluminescence detection

A microfluidic chip-based sequential injection system with trapped droplet liquid-liquid extraction preconcentration and chemiluminescence detection was developed for achieving high sensitivity with low reagent and sample consumption. The microfabricated glass lab-chip had a 35 mm long extraction channel, with 134 shrunken opening rectangular recesses (L 100 microm x W 50 microm x D 25 microm) arrayed within a 1 mm length on both sides of the middle section of the channel. Ketonic peroxyoxalate ester solution was filled in the recesses forming organic droplets, and keeping the aqueous sample solution flowing continuously in the extraction channel; analytes were transferred from the aqueous phase into the droplets through molecular diffusion. After liquid-liquid extraction preconcentration, catalyst and hydrogen peroxide solutions were introduced into the channel, and mixed with analytes and peroxyoxalate ester to emit chemiluminescence light. The performance of the system was tested using butyl rhodamine B, yielding a precision of 4% RSD (n = 5) and a detection limit of 10(-9) M. Within a 17 min analytical cycle, the consumptions of sample and peroxyoxalate solutions were 2.7 microL and 160 nL, respectively.     

High performance liquid chromatography with chemiluminescence detection of methamphetamine and its related compounds using 4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole.

A high performance liquid chromatographic assay of methamphetamine (MP) and its related compounds, i.e. ephedrine (EP), norephedrine (NE), p-hydroxymethamphetamine (p-HMP), p-hydroxyamphetamine (p-HAP) and amphetamine (AP), with peroxyoxalate chemiluminescence detection has been developed. 4-(N,N-Dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F) was used as a fluorescent labeling reagent. A mixture of hydrogen peroxide and bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate in acetonitrile was used as a postcolumn chemiluminogenic reagent. DBD derivatives of MP and its related compounds were separated by a gradient elution with acetonitrile and 0.01 M imidazole buffer (pH 7.0) within 65 min. The detection limits (S/N = 3) for the proposed method for MP, AP, EP, NE, p-HMP and p-HAP were 27, 100, 40, 133, 25 and 133 fmol on column, respectively. The recoveries of these compounds with normal urine samples were 87.4-106.4%. The method was successfully applied to the assay of MP and its metabolites in urine samples from MP addicts. A good linear correlation for the resulted amounts of MP or AP between the proposed method and gas chromatography was obtained (r = 0.993 for MP or 0.991 for AP).     

Effect of a dual-head short-stroke pump on post-column peroxyoxalate chemiluminescence detection

A dual-head short-stroke pump has two advantages in the post-column peroxyoxalate chemiluminescence (PO-CL) detection system. The first is to increase the mixing efficiency of solutions. The second is to increase the stability of the PO-CL reaction by keeping the aryl oxalate and hydrogen peroxide solutions separate. The detection sensitivities for six polycyclic aromatic hydrocarbons (PAHs) increased in the present system by using bis(2,4-dinitrophenyl) oxalate (DNPO) or bis(2,3,4,5,6-pentafluorophenyl) oxalate (PFPO) instead of such popular aryl oxalates as bis(2,4,6-trichlorophenyl) oxalate (TCPO) and bis[2-(3,6,9-trioxadecyloxycarbonyl)-4-nitrophenyl] oxalate (TDPO). Both DNPO and PFPO increased the sensitivities by factors of 4.1-10.2 and 3.5-8.1, respectively. In addition, DNPO was more stable than PFPO in acetonitrile. These results suggest that DNPO is the most useful aryl oxalate for the sensitive PO-CL detection of PAHs.     

Development of FIA equipped with a chemiluminescence detector using a mixed reagent of luminol and 1,10-phenanthroline.

We developed an FIA system equipped with a chemiluminescence detector using a mixed chemiluminescence reagent of luminol and 1,10-phenanthroline for the detection of metal ions and metal complexes. The carrier, mixed chemiluminescence reagent comprising luminol, 1,10-phenanthroline, and cethyltrimethylammonium bromide, and H2O2 solutions were fed by corresponding pumps at a definite flow rate. Sample solutions dissolving hematin, [Co(NH3)4(H2O)2]2(SO4)3, CuSO4, NiCl2, K3[Fe(CN)6], and K4[Fe(CN)6] were analyzed as models by the means of the present FIA system. Solutions of hematin, [Co(NH3)4(H2O)2]2(SO4)3, CuSO4, and NiCl2 were detected as positive peaks, as usual. The order of the catalytic activity of these samples for the present chemiluminescence reaction using the mixed chemiluminescence reagent was [Co(NH3)4(H2O)2]2(SO4)3 > hematin > CuSO4 > NiCl2. On the other hand, sample solutions of K3[Fe(CN)6] and K4[Fe(CN)6] were detected as negative peaks and were determined over the ranges of 1 x 10(-8) - 1 x 10(-6) M with a detection limit of 1 x 10(-8) M and 2 x 10(-8) - 4 x 10(-6) M with a detection limit of 2 x 10(-8) M, respectively. Their negative peaks were observed reproducibly with a relative standard deviation of 2 - 5%.     

Development of an immune microanalysis system by use of peroxyoxalate chemiluminescence detection.

We developed an immune microanalysis system incorporating chemiluminescence detection, where the peroxyoxalate chemiluminescence (CL) detection using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl]oxalate (TDPO)-hydrogen peroxide (H2O2)-fluorescein isothiocianate (FITC) reaction was newly adopted. The analysis system performed the following three processes on a microchip: immune reaction for high selectivity, electrophoresis for formation and transportation of the sample plug, and CL detection. The immune reaction was carried out using an antibody-immobilized glass bead. The glass bead was placed in one of the reservoirs in the microchip along with antigen (analyte) and a known amount of FITC-labeled antigen to set up a competitive immune reaction. The reactant after the immune reaction was fed electrophoretically into the intersection, resulting in a sample plug. The sample plug was then moved into another reservoir containing TDPO-H2O2 acetonitrile solution. At this point, CL detection was performed. The system described here was capable of determining human serum albumin or immunosuppressive acidic protein as a cancer marker in human serum.