Hybrid ZnO/polymer thin films prepared by RF magnetron sputtering

Zinc oxide/poly(acrylic acid) (ZnO/PAA) multilayered hybrid films with different layer thicknesses were prepared by radio frequency magnetron sputtering. Zinc peroxide was used as precursor materials for the preparation of ZnO layers, since the zinc peroxide decomposes to ZnO during the film deposition. The films have a high transmittance in the visible region and exhibit visible photoluminescence emission. The band gap energy of the films—determined by the Tauc relationship—decreases with increasing layer thickness (3.40–3.36 eV) due to the increasing crystalline size of the ZnO particles. The morphological investigations showed that a real layered hybrid film structure formed.     

Preparation and properties of highly dispersed copper oxide in a zeolite matrix

Highly dispersed CuO clusters inserted into a zeolite matrix were prepared by oxidative degradation of the (μ₄-O)L₄Cu₄Cl₆ tetranuclear complex (L isN,N-diethylnicotinamide) preadsorbed on a dehydrated NaX zeolite from a solution in anhydrous dichloromethane. The catalytic activity of the CuO/NaX catalyst thus obtained in the oxidation of CO is an order of magnitude higher than that of massive CuO. Presented at the First Moscow Workshop on Highly Organized Catalytic Systems (June 19, 1997). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1761–1764, October, 1997.     

Physical properties of metal-doped ZnO thin films prepared by RF magnetron sputtering at room temperature

Journal of Solid State Electrochemistry - Transparent thin films of pure ZnO, Ca-doped ZnO (CZO), and Ga-doped ZnO (GZO) were deposited on glass by RF magnetron sputtering. The influence of calcium...     

Characterization of iron hydroxide/oxide nanoparticles prepared in microemulsions stabilized with cationic/non-ionic surfactant mixtures

Iron oxide-hydroxide (α-Fe(2)O(3); Fe(OH)(3)) nanoparticles have been prepared by a microemulsion route using ammonia (NH(3)) solution or tetrabutylammonium hydroxide (TBAH) as precipitants. The iron oxide-hydroxide nanoparticles obtained were characterized by TGA, N(2) sorptiometry, XRD, IR, SEM, HR-TEM, and DLS techniques. Properties such as specific surface area (S(BET)), pore sizes and shapes, average particle size and distribution, crystallite structure, and thermal stability were determined. The properties of nanoparticles prepared using NH(3) and TBAH were compared after drying at 100°C and after being calcined in the temperature range 250-1100°C. It was found that the suspensions prepared using TBAH suffered immediate separation while those prepared using NH(3) resulted in very stable suspensions. Also, it was found that TBAH did not offer any advantage over NH(3) either in terms of specific surface area or in particle size of the prepared nanoparticles. Hence, the later part of the study was concentrated on the NH(3)-precipitated nanoparticles with particular emphasis on finding the most favorable, W (water-to-surfactant ratio) and/or surfactant concentration, S, to obtain the best conditions in terms of higher surface areas and narrower particle size distribution. It was found that the prepared suspension consisted of monodisperse nanoparticles (standard deviations <10%) and after separation and drying, high surface area powders were obtained. The highest surface area (315 m(2) g(-1)) was obtained when the smallest W (=20) and highest S (=0.20 mol L(-1)) were employed.     

Effect of the sputtering parameters on the physical properties and photocatalytic reactivity of TiO2 thin films prepared by an RF magnetron sputtering deposition method

Visible light-responsive TiO₂ (Vis-TiO₂) thin films were successfully developed by applying a radio-frequency magnetron sputtering deposition method by controlling various sputtering parameters such as the substrate temperature, Ar gas pressure, and the target-to-substrate distance. UV–Vis, XRD and SEM investigations revealed that optical property, the crystal structure, and photocatalytic activity of Vis-TiO₂ are strongly affected by the sputtering parameters during the deposition step. Vis-TiO₂ was found to act as an efficient photocatalyst for the H₂ and O₂ evolution from water under visible light irradiation (λ ≥ 420 nm). SIMS investigations have revealed that a slight decrease in the O/Ti ratio of the TiO₂ thin films plays an important role in the modification of the electronic properties of Vis-TiO₂ thin films, enabling them to absorb visible light.     

Characterization of self-assembled films of NiGa layered double hydroxide nanosheets and their electrochemical properties

In this study, we have demonstrated the synthesis and delamination of a rarely studied NiGa layered double hydroxide (LDH) system. Hydrothermal treatment under agitation conditions at 200 °C for 4 h resulted in the formation of highly crystalline NiGa LDHs in a shorter time than those synthesized without agitation. The LDH was delaminated into the individual nanosheets in formamide. The most significant finding in this study is the electrochemical behavior of interlayer ferricyanide anions intercalated with the layer-by-layer (LBL) assembly method. The morphology of LBL film with one layer is also monitored with atomic force microscopy. The cyclic voltammogram is similar to potassium metal hexacyanoferrate systems with its unique two-peak wave. Raman spectrum of the film revealed that the metal center of the interlayer cyano complex is in interaction with the Ni²⁺ of the host layer. It was concluded that the two-peak cyclic voltammogram of the film is a result of two different forms of the hexacyanoferrate in the interlayer.     

Thermoelectric properties of PEDOT films prepared by electrochemical polymerization

Thermoelectric (TE) properties of flexible and free‐standing poly(3,4‐ethylenedioxythiophene) (PEDOT) films synthesized via galvanostatic polymerization of 3,4‐ethylenedioxythiophene in propylene carbonate containing sulfated poly(β‐hydroxyethers) (S‐PHE) as polymer electrolyte were elaborately studied. Both electrical conductivities (σ ) and Seebeck coefficients (S ) of the PEDOT:S‐PHE films were increased by decreasing the temperature (T ) or by increasing the current density (J ) during electrosynthesis. Possible reasons for the lack of a trade‐off relation commonly observed between σ and S are discussed on the basis of SEM and oxidation‐level measurements. Preparation of the PEDOT:S‐PHE films was optimized with respect to T and J . In addition, the oxidation level of the PEDOT:S‐PHE films was controlled by potential and the change of their TE performances was discussed in conjunction with the change of chemical species involved. The power factor (PF = σS ²) of the PEDOT:S‐PHE films reached 7.9 μW m^?1 K^?2, leading to a dimensionless TE figure‐of‐merit (ZT ) of 0.013. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 524–531     

Physical and chemical properties of nano-sized aluminum hydroxide and oxide particles obtained by the electrochemical method

The structure and properties of nanoparticles of aluminum hydroxides and oxides obtained by electrochemical, chemical, and combined methods were studied by transmission electron microscopy, X-ray diffraction, thermal analysis, and atomic emission spectroscopy. The influence of synthesis conditions on the structure and morphology of nanoparticles was studied. It was shown that the effect of an electrochemical field allows monophasic systems to be obtained with a narrower range of particle sizes than in the case of chemical deposition.     

Dielectric properties of tetragonal tungsten bronze films deposited by RF magnetron sputtering

Tetragonal tungsten bronze (TTB) films have been synthesised on Pt(111)/TiO₂/SiO₂/Si substrates from Ba₂LnFeNb₄O₁₅ ceramics (Ln = La, Nd, Eu) by RF magnetron sputtering. X-ray diffraction measurements evidenced the multi-oriented nature of films with some degrees of preferential orientation along (111). The dependence of the dielectric properties on temperature and frequency has been investigated. The dielectric properties of the films are similar to those of the bulk, i.e., ε ∼150 and σ ∼10⁻⁶ Ω⁻¹ cm⁻¹ at 1 MHz and room temperature. The films exhibit two dielectric anomalies which are attributed to Maxwell Wagner polarization mechanism and relaxor behaviour. Both anomalies are sensitive to post-annealing under oxygen atmosphere and their activation energies are similar E_a ∼0.30 eV. They are explained in terms of electrically heterogeneous contributions in the films.     

Effects of negative bias on the structural,topological and tribological properties of amorphous carbon films prepared by magnetron sputtering

Amorphous carbon films were prepared in a magnetron sputtering system at different d.c. negative substrate biases (?50, ? 100, ? 150, ? 200 and ? 250 V). The surface roughness, hardness and tribological properties of as‐deposited films were investigated based on the films' structural evolution. Compared with the films deposited at the negative bias of ? 50 and ? 250 V, the microstructure and bond configuration of the films deposited at negative bias of ? 150 V favored a more graphite‐like structure, which had the maximum of graphiticclusters and ordering structures; meanwhile, the films deposited at bias of ? 150 V showed the minimum coefficient of friction (COF) in air, while the wear rate showed a decrease of two orders of magnitude. The tribotesting results were attributed to the increase of graphitic domains of amorphous carbon films which decreased the interfacial shear force and lowered the COF. The uniform and ordering structure induced steady and smooth friction curves. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface characterization of CuSn thin films deposited by RF co‐sputtering method

CuSn thin films were deposited by the radio‐frequency (RF) magnetron co‐sputtering method on Si(100) with Cu and Sn metal targets with various RF powers. The thickness of the films was fixed at 200 ± 10 nm. The synthesized CuSn thin films mainly consisted of Cu₂₀Sn₆ and Cu₃₉Sn₁₁ phases, which was revealed by an X‐ray diffraction (XRD) study. The high‐resolution Cu 2p XPS and Cu LMM Auger electron spectra indicate that metallic Cu oxidized to Cu⁺ and Cu²⁺ as the RF power on Cu target increased. The atomic ratios of Sn⁰ and Sn⁴⁺ decreased, while that of Sn²⁺ increased with increasing RF power on the Cu target. The polar surface free energy (SFE) component has a different tendency in comparison with the total SFE and the dispersive SFE component. The dispersive SFE component was the dominating contributing factor to the total SFE compared with the polar SFE. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface morphology and electrical properties of copper thin films prepared by MOCVD

Thin copper films have been grown in a vertical MOCVD (Metal-Organic Chemical Vapor Deposition) reactor using bis(2,2,6,6-tetramethyl-3,5-heptanedionato) copper(II), Cu(thd)₂, as precursor. Deposition has been carried out in a pure hydrogen atmosphere (pressure: 3, 20 mbar) at different substrate temperatures (350–750 ° C). The films have been investigated by profilometry, four-point resistivity measurements, ESCA, AES, XRD, AFM, and Normarsky microscopy. An unusual dependence of the film thickness with deposition time has been observed. Rapid growth occurred in the first minutes resulting in badly conducting films (thickness below 1000 Å). Good electrical resistivities have been obtained above 2000 Å. AFM has been used to gain information about the surface morphology of the films with different thicknesses. The grain size and surface roughness increased with increasing film thickness. Small grains grew in the beginning and the electrical properties have been governed by the highly Ohmic bridges between the individual grains.     

还原氧化石墨烯/碳纳米管/Co_3O_4三元复合材料的制备与电化学性能

将低温水热反应和低温热处理相结合,制备了含还原氧化石墨烯(RGO)、碳纳米管(CNTs)和Co3O4的三元纳米复合材料RGO-CNTs-Co3O4;利用X射线衍射仪、扫描电子显微镜、透射电子显微镜分析了合成产物的相组成和微观结构,分析了其形成过程;并利用电化学测试装置测定了其作为锂离子电池负极材料的电化学性能.结果表明,在合成反应过程中,氧化石墨烯被还原剂肼还原为石墨烯,同时在石墨烯和CNTs表面生成氢氧化钴;再经低温热处理得到RGO-CNTs-Co3O4三元复合材料.Co3O4纳米颗粒均匀分散在由RGO片层和CNTs组成的三维网络结构中;这种三维网络结构既有利于电子和离子的传输,又能够有效抑制Co3O4在脱嵌锂过程中因体积变化引起的结构破坏.总体而言,合成的新型三元复合材料具有高的比容量以及良好的循环性能与倍率性能.     

A general electrochemical approach to deposition of metal hydroxide/oxide nanostructures onto carbon nanotubes

This communication describes a new and relatively general electrochemical approach to the deposition of transition metal hydroxide/oxide nanostructures onto multi-walled carbon nanotubes (MWNTs) based on the precipitation of metal hydroxide/oxide nanostructures onto MWNTs by increasing the local pH values at the electrode/electrolyte interface induced by the proton-consuming electrochemical reduction of hydrogen peroxide (H₂O₂). The results obtained with cyclic voltammetry, scanning electron microscopy, and X-ray photoelectron spectroscopy of the synthetic nanocomposites substantially suggest the deposition of the metal hydroxides/oxides onto MWNTs induced by the electrochemical reduction of H₂O₂. This study essentially offers a facile but effective and relatively general electrochemical approach to the synthesis of the nanocomposites consisting of metal hydroxides/oxides and MWNTs.     

Organic-mineral composites copper oxide/chitosan/carbon fiber obtained by the electrodeposition method

The methods of the coprecipitation of chitosan and copper-containing particles on a carbon fiber used as a cathode and also of the precipitation of copper(II) on a carbon-fiber electrode preliminarily modified by chitosan were studied for feasibility of obtaining composites containing copper oxide/copper in a chitosan matrix. The composition, morphology, structure of the organic-mineral composites were studied by the methods of X-ray phase analysis, scanning electronic microscopy, X-ray photoelectron spectroscopy, and ESR spectroscopy.     

The structure and tribological properties of aluminum/carbon nanocomposite thin films synthesized by reactive magnetron sputtering

Hydrogenated nanocomposite aluminum/carbon thin films (Al/a‐C:H) were fabricated on stainless steel and silicon wafer substrates via unbalanced reactive magnetron sputtering from an Al target in CH₄/Ar plasma. The composition and structure of Al/a‐C:H films were investigated by high‐resolution transmission electron microscope (HRTEM), XPS and micro‐Raman spectroscopy. Nanoindenter, interferometer and ball‐on‐disc tribometer were carried out to evaluate the hardness, internal stress and tribological properties of Al/a‐C:H films. HRTEM observations confirmed that the metallic Al nanocrystallites were uniformly dispersed in the amorphous carbon matrix. XPS and Raman analyses indicated that the sp² content increased with the increase of Al content in the films. Nanoindenter and interferometer tests exhibited that the uniform incorporation of Al nanocrystallites can diminish drastically the magnitude of internal stress with maintaining the higher hardness of as‐deposited films. Especially, the ball‐on‐disc tribometer measurements revealed that the nanocomposite film with 2.3 at.% Al content exhibited relatively better wear resistance and self‐lubrication performance with a friction coefficient of 0.06 and wear rate of 3.1 × 10^?16 m³/ N·m under ambient air, which can be attributed to the relatively higher hardness, the formation of continuous graphitized transfer film on counterface and the reduced reaction of oxygen with carbon. Copyright © 2010 John Wiley & Sons, Ltd.     

Flexible carbon nanotube/polyaniline paper-like films and their enhanced electrochemical properties

The carbon nanotube/polyaniline (CNT/PANI) composites have important potential applications as the electrodes in energy storage devices for their attractive electrochemical properties. In this work, we report a novel method to prepare the interesting paper-like CNT/PANI composites by using the CNT network as the template. Compared with the conventional brittle CNT/PANI composites, these paper-like composites were much thin and flexible. This work demonstrates a new approach, which may transform a brittle polymer into flexible films. Meanwhile, these film electrodes showed much superior electrochemical performance such as higher specific capacitance, lower internal resistivity, and more stability under different current loads. These paper-like composite electrodes have promising applications in new kinds of energy storage devices.     

Preparation of highly dispersed copper oxide by thermal destruction of binuclear CuII monofluoroacetate in zeolite Y cavities

Thermal destruction of the binuclear monofluoroacetate complex Cu₂(CH₂FCOO)₄ deposited on zeolite Y was studied by the TG-DTA and ESR methods. Large particles of copper oxide are not formed and fine dispersion of CuO in the matrix is observed due to low temperatures of the destruction of the supported complex (240–250°C) and restriction of the process mainly to large cavities of the zeolite. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1371–1374, August, 2000.