Highly stereoselective reduction of methyl ketone complexes of the chiral Lewis acid [(η-C5H5)Re(NO)(PPh3)] by K(s-C4H9)3BH; synthesis of optically active secondary alcohols and derivatives

Reaction of optically active ketone complexes (+)-(R)-[(η⁵-C₅H₅)Re(NO)-(PPh₃)(η¹-O=C(R)(CH₃)]⁺ BF₄⁻ (R = CH₂CH₃, CH(CH₃)₂m C(CH₃)₃, C₆H₅) with K(s-C₄H₉)₃BH gives alkoxide complexes (+)-(RS)-(η⁵-C₅H₅)Re(NO)(PPh₃)-(OCH(R)CH₃) (73–90%) in 80–98% de. The alkoxide ligand is then converted to Mosher esters (93–99%) of 79–98% de.     

Synthese et etude des complexes [C5H4(CH2)3C5H4]Ti(C5H5)2 presentant un pont entre deux ligands cyclopentadienyles

The complex (di-η⁵-C₅H₄CH₂CH₂CH₂C₅H₄)Ti(η¹-C₅H₅)₂ (I) can be obtained unambiguously starting from the corresponding bridged titanocene dichloride. Attempts to synthesize the isomeric compounds (η⁵-C₅H₅)₂ Ti(di-η¹-C₅H₄-CH₂CH₂CH₂C₅H₄) (I′) by the action of a convenient bridged dianion on (C₅H₅)₂ TiCl₂ afford several compounds, one of them is the complex I. The possibility of interconversion of these complexes by a fluctional process is discussed.     

Photochemical reactions of alkynyl iron (II) complexes with carbon disulfide. Insertion of CS2 into an iron-C(sp) bond

The novel alkynyldithiocarboxylate complexes [Fe(η⁵-C₅H₅)(S₂CCCR) (dppm-P)] (3a,b) and [Fe(η₅-C₅H₅)(S₂CCCR)(PPh₃)] (4a,b) were obtained through the insertion of CS₂ into the iron-akynyl bond in the complexes [Fe(η₅-C₅H₅)(CCR)(L)(L′] L, L′ = dppm R = Ph (1a), ^tBu(1b); L = (CO), L′ = (PPh₃) R = Ph (2a), ^tBu (2b). Variable-temperature ³¹P{¹H} NMR studies indicate the presence of two different isomers, [Fe(η⁵-C₅H₅)(η³-S,C,S′---S₂CCCR)(L)(L′)] and [Fe(η⁵-C₅H₅(η²-S,S′-S₂CCCR)(L)(L′)], which rapidly interconvert at room temperature. The synthesis of the precursor complex [Fe(η⁵-C₅H₅)(CC^tBu)(CO)(PPh₃)] is also described.     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

Mechanism of formation of (η-C5H5)2NbH3 from the reaction of (η-C5H5)2NbCl2 with hydridoaluminate reducing agents

The mechanism of the transformation of (η⁵-C₅H₅)₂NbCl₂ to (η⁵-C₅H₅)₂NbH₃ by hydridoaluminate reducing agents has been investigated. Results suggest disproportionation of a niobium(IV) hydrite, leading to the trihydride product and a niobium(III) hydridoaluminate, (η⁵-C₅H₅)₂NbH₂AlR₂, which in turn is converted to the trihydride on hydrolysis. (η⁵-C₅H₅)₂NbH₂AlH₂ has been isolated; deuterium labelling shows that hydrogens exchange between ring and metal-bridging positions in this molecule.     

Substituted cyclopentadienyl ligands—10. Intramolecular steric interactions in [(η-C5H3(SiMe3)2)Mo(CO)2(L)I]

Reaction of C₅H₄(SiMe₃)₂ with Mo(CO)₆ yielded [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₃]₂, which on addition of iodine gave [(η⁵-C₅H₃(SiMe₃)₂Mo(CO)₃I]. Carbonyl displacement by a range of ligands: [L = P(OMe)₃, P(OPrⁱ)₃,P(O-o-tol)₃, PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(m-tol)₃] gave the new complexes [(η⁵-C₅H₃(SiMe₃)₂ MO(CO)₂(L)I]. For all the trans isomer was the dominant, if not exclusive, isomer formed in the reaction. An NOE spectral analysis of [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₂(L)I] L = PMe₂Ph, P(OMe)₃] revealed that the L group resided on the sterically uncongested side of the cyclopentadienyl ligand and that the ligand did not access the congested side of the molecule. Quantification of this phenomenon [L = P(OMe)₃] was achieved by means of the vertex angle of overlap methodology. This methodology revealed a steric preference with the trans isomer (less congestion of CO than I with an SiMe₃ group) being the more stable isomer for L = P(OMe)₃.     

Synthesis and X-ray crystal structures of [Ph2PMe2][(η-C5H4Bu)2Li] and [(η-C5H4Bu)2Yb(Cl)CH2P(Me)Ph2]

The interaction of [(η⁵-C₅H₄Bu^t)₂YbCl · LiCl] with one equivalent of Li[(CH₂) (CH₂)PPh₂] in tetrahydrofuran gave [Ph₂PMe₂][(η⁵-C₅H₄Bu^t)₂Li] (1) and [(η⁵-C₅H₄Bu^t)₂Yb(Cl)CH₂P(Me)Ph₂] (2) in 10% and 30% yields, respectively. 1 could also be prepared in 70% yield from the reaction of [Ph₂PMe₂][CF₃SO₃] with two equivalents of (C₅H₄Bu^t)Li. Both compounds have been fully characterized by analytical, spectroscopic and X-ray diffraction methods. The solid state structure of 1 reveals a sandwich structure for the [(η⁵-C₅H₄Bu^t)₂Li]⁻ anion.     

Indenyl complexes of ruthenium(II) containing optically active diphosphines. X-ray structures of (S,S)-(η-C9H7)-Ru{Ph2PCH(CH3)CH(CH3)PPh2}Cl and of its η-C5H5 analogue

The optically active indenyl complexes ((η⁵-C₉H₇)Ru(L---L)Cl (where L---L is either (S,S)-1,2-dimethyl-1,2-ethanediylbis(diphenylphosphine) (chiraphos) or (R,R)-1,2-cyclopentanediylbis(diphenylphosphine) (cypenphos)) have been synthesized and spectroscopically characterized and compared with the corresponding cyclopentadienyl complexes. Reaction of the new complexes with 2-e-donors give cationic adducts in which the pentahaptocoordination of the indenyl ligand is maintained. The crystal structures of (S,S)-(η⁵-C₉H₇)Ru{Ph₂PCH(CH₃)CH(CH₃)PPh₂}Cl (1) and (S,S)-η⁵-C₅H₅Ru{Ph₂PCH(CH₃)CH(CH₃)PPh₂}Cl (3) have been determined.     

Structures of propionaldehyde, butyraldehyde, and pivalaldehyde complexes of the chiral rhenium fragment [(η-C5H5)Re(NO)(PPh3)]

The crystal structures of propionaldehyde complex (RS,SR)-(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₃)]⁺ PF₆⁻ (1b⁺ PF₆^s−; monoclinic, P2₁/c (No. 14), a = 10.166 (1) Å, b = 18.316(1) Å, c = 14.872(2) Å, β = 100.51(1)°, Z = 4) and butyraldehyde complex (RS,SR)-[(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₂CH₃)]⁺ PF₆⁻ (1c⁺PF₆⁻; monoclinic, P2₁/a (No. 14), a = 14.851(1) Å, b = 18.623(3) Å, c = 10.026(2) Å, β = 102.95(1)°, Z = 4) have been determined at 22°C and −125°C, respectively. These exhibit C O bond lengths (1.35(1), 1.338(5) Å) that are intermediate between those of propionaldehyde (1.209(4) Å) and 1-propanol (1.41 Å). Other geometric features are analyzed. Reaction of [(η⁵-C₅H₅)Re(NO)(PPh₃)(ClCH₂Cl)]⁺ BF₄⁻ and pivalaldehyde gives [(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHC(CH₃)₃)]⁺BF₄⁻ (81%), the spectroscopic properties of which establish a π C O binding mode.     

The stereochemistry at silicon of an iron to cyclopentadienyl ligand silyl group migration in (η-C5H5)Fe(CO)2SiR3

The silyl group migration observed upon treating (R)(+)-(η⁵-C₅H₅)Fe(CO)₂-SiMePh(1-Np) with n-BuLi occurs with retention of configuration at silicon. The anion resulting from the migration, (η⁵-C₅H₄SiMePh(1-Np))Fe(CO)₂Li, is alkylated with MeI to give (R)-(−)-(η⁵-C₅H₄SiMePh(1-Np))Fe(CO)₂Me (II). Compound II is independently prepared from (η⁵-C₅H₅)Fe(CO)₂Me. A concerted mechanism for the migration involving frontside nucleophilic attack at silicon is suggested.     

First examples of η- and η --- η-coordination in triphosphorus analogues of ferrocene. Crystal structure of the iron sandwich complex [Fe(η-C5H5) (η-C2R2P3)W (CO)5] (R = Bu)

Syntheses of the novel sandwich compounds [Fe(η⁵-C₅H₅)(η⁵-C₂R₂P₃)] and [Fe(η⁵-C₅H₅)(η⁵-C₂R₂P₃)W(CO)₅], (R = Bu^t), are described. The mode of attachment of the [W(CO)₅] fragment in the latter compound has been determined by NMR and single crystal X-ray diffraction studies.     

Synthesis and crystal structure of the novel trimanganese tetrathiolate incomplete cubane: [Mo(η-C5H5)2(H)CO][Mn3(CO)9(μ-SC6H5)4]

An unexpected trimanganese(I) tetrathiolate-bridged complex, [Mn₃(CO)₉(μ-SC₆H₅)₄]⁻, with an incomplete cubane structure, was obtained by thermal reaction of [Mn₂(CO)₁₀] with [Mo(η⁵-C₅H₅)₂(SC₆H₅)₂]. The structure, established by single-crystal X-ray diffraction studies, shows the cation, [Mo(η⁵-C₅H₅)₂(H)CO]⁺, directed towards the vacant site of the cubane structure. Possible routes by which the anion and the cation could be formed are discussed.     

Stabile Bis(η-alkin)MCl2-komplexe; Darstellung und reaktivität

The synthesis and reactivity of {(η⁵-C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂} MCl₂ (M = Fe: 3a; M = Co: 3b; M = Ni: 3c) is described. The complexes 3 are accessible by the reaction of (η⁵-C₅H₄SiMe₃) ₂Ti(CSiMe₃)₂ (1) with equimolar amounts of MCl₂ (2) (M = Fe, Co, Ni). 3a reacts with the organic chelat ligands 2,2′-dipyridyl (dipy) (4a) or 1,10-phenanthroline (phen) (4b) in THF at 25°C to afford in quantitative yields (η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂ (1) and [Fe(dipy)₂]Cl₂ (5a) or [Fe(phen)₂]Cl₂ (5b). 1/n[Cu^IHal]_n (6) or 1/n[Ag^IHal]_n (7) (Hal = Cl, Br) react with {(η⁵ -C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂}FeCl₂ (3a), by replacement of the FeCl₂ building block in 3a, to yield the compounds {(η⁵-C₅H₄SiMe₃)₂Ti(C CSiMe₃)₂}Cu^IHal (8) or {(η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂}Ag^IHal (9) (Hal = Cl, Br), respectively. In 8 and 9 each of the two Me₃SiCC-units is η²-coordinated to monomeric Cu^I Hal or Ag^IHal moieties. Compounds 8 and 9 can also be synthesized by the reaction of (η⁵-C₅H₄SiMe₃)₂ Ti(CSiMe₃)₂ (1) with 1/n[Cu^IHal]_n (6) or 1/n [Ag^IHal]_n (7) in excellent yields. All new compounds have been characterized by analytical and spectroscopic data (IR, ¹H-NMR, MS). The magnetic moments of compounds 3 were measured.     

Darstellung von metallkomplexen des thio- und selenoacetaldehyds sowie die kristallstruktur von C5H5Rh(η-CH3CHSe)P(i-Pr)3

The compounds C₅H₅Co(η²-CH₃CHS)PMe₃ (I) and C₅H₅Co(η²-CH₃CHSe)PMe₃ (II) are prepared from C₅H₅Co(CO)PMe₃, CH₃CHBr₂ and NaSH or NaSeH, respectively. The synthesis of the corresponding rhodium complexes C₅H₅Rh(η²-CH₃CHS)P(i-Pr)₃ (VI) and C₅H₅Rh(η²-CH₃CHSe)P(i-Pr)₃ (VII) has been achieved through hydrogenation of C₅H₅Rh(η²-EC=CH₂)P(i-Pr)₃ (E = S, Se), using RhCl(PPh₃)₃ as a catalyst. The crystal structure of VII has been determined.     

Synthesis and structure of ansa-cyclopentadienyl pyrrolyl titanium complexes: [(η-C5H4)CH2(2-C4H3N)]Ti(NMe2)2 and [1,3-{CH2(2-C4H3N)}2(η-C5H3)]Ti(NMe2)

Reaction of ansa-cyclopentadienyl pyrrolyl ligand (C₅H₅)CH₂(2-C₄H₃NH) (2) with Ti(NMe₂)₄ affords bis(dimethylamido)titanium complex [(η⁵-C₅H₄)CH₂(2-C₄H₃N)]Ti(NMe₂)₂ (3) via amine elimination. A cyclopentadiene ligand with two pendant pyrrolyl arms, a mixture of 1,3- and 1,4-{CH₂(2-C₄H₃NH)}₂C₅H₄ (4), undergoes an analogous reaction with Ti(NMe₂)₄ to give [1,3-{CH₂(2-C₄H₃N)}₂(η⁵-C₅H₃)]Ti(NMe₂) (5). Molecular structures of 3 and 5 have been determined by single crystal X-ray diffraction studies.     

A novel arene bonding mode in the mixed-metal cluster Os4Ru(μ-H) 3(CO) 12(μ3-η-C6H5) P(OMe)3

The ionic coupling of [Os₄H₂(CO)₁₂]²⁻ with [Ru(η⁶-C₆H₆)(MeCN)₃]²⁺ affords the neutral mixed metal cluster Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆) 1. The reaction of 1 with trimethylphosphite leads to the initial formation of the addition product Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆)P(OMe)₃ 2, but this complex rearranges in solution to give Os₄Ru(μ-H)₃(CO)₁₂(μ₃-η⁶-C₆H₅)P(OMe)₃ 3. An X-ray structure of 3 shows that the metal core of the cluster is a ruthenium-spiked Os₄ tetrahedron, with one hydrogen atom from the arene having transferred to the Os₄ core, and one arene carbon bridging an Os-Os edge, while the ring as a whole remains η⁶-bound to the Ru atom.     

A convenient synthesis of Fe(CO)2(η-S2CNMe2)2 and Fe(η-S2CNMe2)2 from the monodentate dithiocarbamato derivative, [(η-C5H5)(CO)3W(η-SCSNMe2)] and Fe2(CO)9

A high yield synthesis of the carbonyl dithiocarbamato derivative Fe(CO)₂(η²-S₂CNMe₂)₂ and Fe(η²-S₂CNMe₂)₂ by photolysis with visible light of solutions containing Fe₂(CO)₉ or Fe₃(CO)₁₂ and [(η⁵-C₅H₅)(CO)₃W(η¹-SCSNMe₂)] is reported.     

Some additional aspects of versatile starting compounds for cationic organoiron complexes: molecular structure of the aqua complex [(η-C5Me4Et)Fe(CO)2(OH2)]BF4 and solution behavior of the THF complex [(η---C5R5)Fe(CO)2(THF)]BF4

The structures of the versatile starting compounds for organoiron complexes, the cationic aqua complex [(η⁵-C₅Me₄Et)Fe(CO)₂(OH₂)]BF₄ (1b) and the halide complexes (η⁵-C₅Me₅)Fe(CO)₂-I (2a), (η⁵-C₅Me₄Et)Fe(CO)₂-I (2b) and (η⁵-C₅Me₄Et)Fe(CO)₂-Cl (3b), are characterized by X-ray crystallography. Complex 1b [Fe---O: 2.022(8) Å and 2.043(9) Å, two independent molecules] is the first structurally characterized example of organoiron aqua complexes. Details of the synthetic procedures for the above complexes and the labile cationic THF complexes [η⁵-C₅R₅)Fe(CO)₂(THF)]BF₄ (4) are disclosed, and the dissociation equilibrium of 4 is confirmed by means of variable temperature ¹H-NMR as well as saturation transfer experiment.     

Synthesis and characterization of hydroxo, pyrazolato and carboxylato derivatives of the PdR(PPh3)moiety (R = C6F5 or C6Cl5)

The hydroxo-complexes [{PdR(PPh₃)(μ-OH)}₂] (R = C₆F₅ or C₆Cl₅) have been obtained by reaction of the corresponding [{PdR(PPh₃)(μ-Cl)}2] complexes with NBu₄OH in acetone. In this solvent, the reaction of the hydroxo-bridged complexes with pyrazole (Hpz) and 3,5-dimethylpyrazole (Hdmpz) in 1:2 molar ratio leads to the formation of the new complexes [{Pd(C₅F₅)(PPh₃)(μ-azolate)}2] and [{Pd(C₆Cl₅)(PPh₃)}₂(μ-OH)(μ-azolate)] (azolate = pz or dmpz). The reaction of the bis(μ-hydroxo) complexes with Hpz and Hdmpz in acetone in 1:1 molar ratio has also been studied, and the resulting product depends on the organic radical (C₆F₅ or C₆Cl₅) as well as the azolate (pz or dmpz). The identity of the isomer obtained has been established in every case by NMR (¹H, ¹⁹F and ³¹P) spectroscopy. The reaction of the bis(μ-hydroxo) complexes with oxalic (H₂Ox) and acetic (HOAc) acids yields the binucle ar complexes [{PdR(PPh₃)}2(μ-Ox)] (R = C₆F₅ or C₆Cl₅) and [{Pd(C₆F₅)(PPh₃)(μ-OAc)}2], respectively. [{Pd(C₆F₅)(PPh₃)(μ-OH)}₂] reacts with PPh₃ in acetone in 1:2 ratio giving the mononuclear complex trans-[Pd(C₆F₅) (OH)(PPh₃)₂], whereas the pentachlorophenylhydroxo complex does not react with PPh₃, even under forcing conditions.     

Synthesis and X-ray structure of (η-C5H5)2W2Ir2(CO)7(CHCO2Et)2, a tetrahedral heterometal cluster with two different environments for ethylcarboxylatocarbene ligands

The tetrahedral heteronuclear cluster complex (η⁵-C₅H₅)₂W₂Ir₂(CO)₁₀ reacts with N₂CHCO₂R (R = Et, Me) at room temperature to form the dicarbene species (η⁵-C₅H₅)₂W₂Ir₂(CO)₇(CHCO₂R)₂. An X-ray diffraction study (R = Et) shows an intact tetrahedral metal framework with two distinct sites for the CHCO₂Et ligands. The first uses its carbon atom to bridge the Ir---Ir bond; the second uses its carbon atom to bridge an Ir---W bond and, additionally, forms a donor bond from a carbonyl oxygen atom to the second tungsten atom.