Discovery by kinetic studies of the latent physicochemical processes and their mechanisms during the growth of porous anodic alumina films in sulfate electrolytes

The kinetics of growth of porous anodic alumina films in pure H₂SO₄, in mixtures of H₂SO₄ and Al₂(SO₄)₃ and in Al(HSO₄)₃, NaHSO₄ and KHSO₄ electrolytes were studied. The latent physicochemical processes at the pore base surface/electrolyte interface, across the barrier layer, inside the metal/oxide interface and at the pore wall surface/electrolyte interface and their mechanisms were revealed. High field strength equations were formulated describing the ionic migrations from the pore base surface. These showed that, at constant current density and temperature, the inverse of the pore base square diameter depends linearly on the inverse of the H⁺ activity in the anodizing solution and that this diameter increases with H⁺ activity, in agreement with the experimental results. The mechanism of electrolyte anion incorporation inside the barrier layer and the real distribution of the anion concentration across both the barrier layer and pore walls were deduced. The effects of the different kinds and concentrations of the electrolyte anions and cations on both the above processes and their mechanisms were also examined. Electronic Publication     

Formulation of a holistic model for the kinetics of steady state growth of porous anodic alumina films

A holistic model for the kinetics of steady state growth of porous anodic alumina films in oxalic acid, H₂C₂O₄, solution was developed not necessarily requiring the adoption of any ‘a priori’ mechanism of porous film growth. By this model the effect of anodising conditions on the transport numbers of Al³⁺ cations and O²⁻ anions across the barrier layer was revealed. The cation (anion) transport number decreased (increased) with current density, increased (decreased) with temperature and was unaffected by the concentration of electrolyte or pH. A complementary atomistic-ionic kinetic model was developed that fully justified these results and showed that the activation distances of Al³⁺ and O²⁻ transport are comparable, but the activation energy of Al³⁺ transport is lower mainly due to the much smaller size of Al³⁺. The validity of the model was tested on the basis of SEM observations, while structural features and the rate of pore wall dissolution were determined.     

Investigation of the incorporation of electrolyte anions in porous anodic Al2O3 films by employing a suitable probe catalytic reaction

A new method has been developed capable of describing the incorporation of electrolyte anions along the pore wall surface and across both the barrier layer and the pore wall oxide after the establishment of the steady state of growth of porous anodic Al₂O₃ where other methods cannot be applied to obtain reliable results. The knowledge of the nature/composition of anodic oxides as regards the incorporation of species like electrolyte anions is of specific importance for both the understanding of the electrochemical mechanism of oxide production and growth and the scientific and technological applications of porous anodic Al₂O₃ films. The method consists of the selection and use of a suitable catalytic probe reaction on porous anodic oxides at thicknesses varying from a value near zero up to the maximum limiting thickness and the treatment of the experimental reaction rate results by a properly developed mathematical formalism. This method was employed in anodic Al₂O₃ films prepared in H₂SO₄ anodizing electrolyte at a constant bath temperature and different current densities using as a probe reaction the decomposition of HCOOH on these oxides, which is almost exclusively a dehydration reaction, at relatively high reaction temperatures, 350 °C and 390 °C, where the effect of other species except SO₄ ²⁻ incorporated in the oxide on the reaction rate is eliminated. It has been shown that the fraction of the intercrystallite surfaces occupied by SO₄ ²⁻ follows a parabola-like distribution. It has a significant value at the pore base surface, depending on the current density, then it passes through a maximum along the pore wall surface and across both the barrier layer and the pore walls near the pore bases at positions depending on the current density and then becomes almost zero at the mouths of the pores of the oxide with the maximum limiting thickness and at both the Al₂O₃/Al interface and cell boundaries. The maximum value of the surface coverage is almost independent of the current density and is always near 1, showing an almost complete saturation of intercrystalline surfaces at these positions. The above distribution of surface coverage predicts a qualitatively similar distribution of the SO₄ ²⁻ bulk concentration across both the barrier layer and pore wall oxide around the pore bases. The method may be improved and developed further either for a more detailed investigation of the above films or to investigate films prepared in other pore-forming electrolytes. Received: 30 July 1998 / Accepted: 30 September 1998     

Study of anion adsorption on polycrystalline Pt by electrochemical quartz crystal microbalance

The changes observed on Pt surfaces during a potential incursion into the underpotentially deposited (UPD) hydrogen and double layer ranges (0.05 to 0.8 V versus HESS) were analyzed in perchloric, sulfuric, phosphoric and hydrochloric acid media. Surface occupation after hydrogen desorption was verified in terms of both mass variations and voltammetric charges measured by EQCM and cyclic voltammetry. Firstly, mass incorporation due to the adsorption of water molecules (approximately 39 ng cm⁻², corresponding to a full monolayer of adsorbed water) replacing the UPD H atoms was observed in every case. The potential range associated with water adsorption varied from 0.05 V to a final value that depended on the strength of anion adsorption on Pt (0.4 V for ClO₄⁻ and 0.3 V for Cl⁻). Secondly, the mass incorporations in the potential region between 0.4 and 0.8 V were associated to adsorption of the corresponding hydrated anions, i.e., ClO₄⁻·2H₂O, HSO₄⁻·2H₂O, HPO₄²⁻ and Cl⁻·6H₂O. Calculated anion coverage values varied from 7 (perchlorate) to 19% (phosphate) on the Pt surface.     

Spectrophotometric determination of thiosulfate and tetraphenylborate ions through ligand exchange reaction at solid surface

Summary A Spectrophotometric method is presented for the microanalysis of analytically important thiosulfate and tetraphenylborate anions in an aqueous solution. The method is based on ligand exchange in a dynamic approach incorporating a solid reagent mercuric chloranilate. The common cations Na⁺, K⁺, Al³⁺, Ca²⁺, and Mg²⁺ do not interfere and the anions CH₃COO^–, C₂O₄ ^2–, SO₄ ^–, C₃H₄OH-(COO)₃ ^3– and NO₃ ^– do not cause any adverse effects. The heavy metals Pb²⁺, Cd²⁺, Fe²⁺, Cu²⁺, and Zn²⁺ cause a negative interference while the halogens and SCN^– type of anions give a positive interference. The method is sensitive up to 5 ppm of tetraphenyl-borate anion and 10 ppm of the thiosulfate anion.

---

Zusammenfassung Ein spektrophotometrisches Mikroverfahren zur Bestimmung von Thiosulfat und Tetraphenylborat in wäßriger Lösung wurde angegeben. Es beruht auf dem Ligandenaustausch mit Hilfe von Quecksilberchloranilat. Die üblichen Kationen Na, K, Al, Ca und Mg stören nicht; auch die Anionen Acetat, Oxalat, Sulfat, Zitrat und Nitrat haben keinen störenden Einfluß. Die Schwermetalle Pb(II), Cd, Fe(II), Cu(II) und Zn verursachen negative Fehler, die Halogene, Thiocyanat und dgl. haben positive Fehler zur Folge. Die Methode ist empfindlich bis zu 5 ppm Tetraphenylborat und 10 ppm Thiosulfat.

     

Epoxy-based oligomeric probe bearing naphthalene units for selective turn-OFF fluorescent sensing of fluoride anion

A simple epoxy-based oligomer 1 bearing naphthalene unit at the chain-ends is reported to be highly selective ON–OFF type fluorescent probe for fluoride anion. The titled oligomer displayed fluorescence quenching upon addition of F^?, resulting in selective detection of fluoride anion over other anions, such as AcO^?, Cl^?, Br^?, I^?, HSO₄^?, NO₃^? and H₂PO₄^? in CH₃CN. Fluorescence experiments suggest the significant influence of the oligomer chain on the sensitivity and selectivity of 1 towards fluoride anion.     

Anion Recognition Using Novel and Colorimetric Tweezer Receptors:1,3-Phenylenedi(carbonylhydrazone) in Aqueous-organic Binary Solvents

本文设计合成了2种新型的间苯二甲酰腙类钳形受体。在DMSO和DMSO-H2O混合溶液中,通过紫外可见光谱分别考察了受体分子3a对F-, Cl-, Br-, I-, AcO-, HSO4-, H2PO4-和ClO4-的相互作用。结果表明,在DMSO溶液中,受体3a对F-,CH3COO-和H2PO4-有显著识别效果,溶液颜色由无色变为黄色,实现裸眼检测。在15%H2O-85%DMSO含水体系中,3a可高选择性识别CH3COO-。1H NMR滴定表明过量F-的加入使受体分子3a发生脱质子作用,探讨了主客体之间的作用机理。并直接用于水相中无机醋酸盐的直接显色检测。     

Effect of anions on the dissolution of Al in acid solutions

The effect of Cl^?, Br^?, I^?, ClO₄^?, NO₃^?, HSO₄^?, HCrO₄^? and H₂PO₄^? on the of Al in 2 M HCl is studied by the thermometric method. Three sets of experiments are carried out, which allow the variation of the concentration of the various species in a programmed manner. Dissolution promotion is noted in solutions to which HCl, HBr and H₂CrO₄ are added. The way of action of each of these anions is discussed. Additions of HI, HClO₄, H₂SO₄ and H₃PO₄, on the other hand, first retard and later enhance the dissolution of Al in 2 M HCl, as their concentration in solution is increased. This is related to anion adsorption, which is counterbalanced by increase in acidity. HNO₃ differs from the other tested acids in causing only dissolution retardation. Experiments in which LaCl₃ is added to the test solution indicate that the NO₃^? is adsorbed as such on Al₂O₃. The ability of the various anions to retard the dissolution of Al in 2 M HCl decreases in the succession: NO₃^? (strong)>I^?>HSO₄^?>H₂PO₄^?>Br^?, ClO₄^? (weak)     

Hydro­gen‐bonding patterns in 2‐amino‐4,6‐di­methyl­pyrimidinium hydrogen sulfate

In the title compound, C₆H₁₀N₃⁺·HSO₄⁻, the asymmetric unit consists of a hydrogen sulfate anion and a 2‐amino‐4,6‐di­methyl­pyrimidinium cation. The hydrogen sulfate anions self‐assemble through O—H⋯O hydrogen bonds, forming supramolecular chains along the b axis, while the organic cations form base pairs via N—H⋯N hydrogen bonds. The amino­pyrimidinium cations join to the sulfate anions via a pair of hydrogen bonds donated from the pyrimidinium protonation site and from the exo amine group cis to the protonated site.     

1,15-Diferrocenyl-2,5,8,11,14-pentaazapentadecane,an Open-Chain Redox-Active Ferrocene-Functionalized Polyazaalkane Ligand for Anions

The interaction of the ferrocene-functionalized open-chain polyazaalkane 1,15-diferrocenyl-2,5,8,11,14-pentaazapentadecane (L¹) with the sulfate, phosphate, and ATP anions has been studied by potentiometric methods in THF/H₂O 70 : 30 (v/v) (containing 0.1M (Bu₄N)ClO₄ at 25°). Additionally, the electrochemical response of L¹ in the presence of H⁺, HSO^-₄, H₂PO^-₄, Br⁻, and Cl⁻ in a non-aqueous solvent such as MeCN has been studied. A remarkable cathodic shift of the ferrocene oxidation potential was induced for phosphate (198 mV) and sulfate (145 mV) showing an EC mechanistic response. Competitive electrochemical studies showed that L¹ is able to electrochemically and selectively recognize HSO^-₄ vs. H₂PO^-₄ in a mixture of both anions in MeCN.     

Effect of desolvation of the reactants during change in the acidity of the medium on the electrophilic hydroxylation and nitration of alkanes

The effect of the acidity of the medium on the hydroxylation and nitration of alkanes (RH) in 90–98% H₂SO₄ at 25°C is described quantitatively by a model taking account of the thermodynamic activity of the RH, H₂O, and HSO₄^- particles. It was concluded that in the transition states the reagents H₃O₂⁺HSO₄^- and NO₂⁺ HSO₄^- are present as HO⁺ and NO₂⁺ ions without the bases H–O and HSO₄^-, the alkanes are present without hydrophobic shells, and the initial reaction products are ROH₂⁺ and RNO₂H⁺.     

A new sulfate acid polymorph of 1,3‐dihydrobenzotriazole

A new sulfate acid polymorph of 1,3‐dihydrobenzotriazole, viz. 1,3‐dihydrobenzotriazolium hydrogensulfate, C₆H₆N₃⁺·HSO₄⁻, differs from an existing polymorph in that the polymeric interaction between the HSO₄⁻ anions, together with different classical (D—H...A) and nonclassical (C—H...A) interactions, changes the space group.     

Selective “naked-eye” sensing of acetate ion based on conformational flexible amide-pyridinium receptor

A simple pincer-shape anion receptor L1 containing amide-pyridinium as binding unit was synthesized and its anion binding properties were investigated by UV–Vis, NMR titration spectra and molecular simulation. L1 displayed better affinity toward AcO^? ion with visible color change compared with other investigated anions, including F^?, H₂PO₄ ^?, Cl^?, Br^?, I^?, NO₃ ^? and HSO₄ ^? ions. The selectivity was ascribed to the synergistic effects arising from hydrogen bonding, electrostatic interaction and induced-fit process.     

Influence of anion substitution on hydrogen‐bonding patterns of salt compounds: cytosinium hydrogen sulfate and cytosinium perchlorate

In the two title compounds, cytosinium hydrogen sulfate, C₄H₆N₃O⁺·HSO₄⁻, (I), and cytosinium perchlorate, C₄H₆N₃O⁺·ClO₄⁻, (II), the asymmetric units comprise a cytosinium cation with hydrogen sulfate and perchlorate anions, respectively. The crystal structures of (I) and (II) are similar; that of (I) is characterized by a three‐dimensional N—H...O, O—H...O and C—H...O hydrogen‐bonded network. In (I) and (II), two‐dimensional layers are formed by N—H...O and C—H...O hydrogen bonds and, in the case of (I), they are linked by O—H...O hydrogen bonds where the anion acts as a donor and the cation as an acceptor. The hydrogen‐bonded sheets in (II) form an angle of 87.1°.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Kinetics and Mechanism of the Cerium(IV) Oxidation of Arnold's Base and the Protonation and Hydroxylation of Michler's Hydrol Blue

In aqueous H₂SO₄, Ce(IV) ion oxidizes rapidly Arnold's base((p-Me₂NC₆H₄)₂CH₂, Ar₂CH₂) to the protonated species of Michler's hydrol((p-Me₂NC₆H₄)₂CHOH, Ar₂CHOH) and Michler's hydrol blue((p-Me₂NC₆H₄)₂CH⁺, Ar₂CH⁺). With Ar₂CH₂ in excess, the rate law of the Ce(IV)-Ar₂CH₂ reaction in 0.100 M H₂SO₄ is expressed -d[Ce(IV)]/dt = k_app[Ar₂CH₂]₀[Ce(IV)] with k_app = 199 ± 8M^?1s^?1 at25°C. When the consumption of Ce(IV) ion is nearly complete, the characteristic blue color of Ar₂CH⁺ ion starts to appear; later it fades relatively slowly. The electron transfer of this reaction takes place on the nitrogen atom rather than on the methylene carbon atom. The dissociation of the binuclear complex [Ce(III)ArCHAr-Ce(III)] is responsible for the appearance of the Ar₂CH⁺ dye whereas the protonation reaction causes the dye to fade. In highly acidic solution, the rate law of the protonation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_obs[Ar₂CH⁺] where K_obs = ((ac + 1)[H*] + bc[H⁺]²)/(a + b[H⁺]) (in HClO₄) and k_obs= ((ac + 1 + e[HSO₄^?])[H⁺] + bc[H⁺]² + d[HSO₄^?] + q[HSO₄^?]²/[H⁺])/(a + b[H⁺] + f[HSO₄^?] + g[HSO₄^?]/[H⁺]) (in H₂SO₄), and at 25°C and μ = 0.1 M, a = 0.0870 M s, b = 0.655 s, c = 0.202 M^?1s^?1, d = 0.110, e = 0.0070 M^?1, f = 0.156 s, g = 0.156 s, and q = 0.124. In highly basic solution, the rate law of the hydroxylation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_OH[OH^?]₀[Ar₂CH⁺] with k_OH = 174 ± 1 M^?1s^?1 at 25°C and μ = 0.1 M. The protonation reaction of Michler's hydrol blue takes place predominantly via hydrolysis whereas its hydroxylation occurs predominantly via the path of direct OH attack.     

Anions as Triggers in Controlled Release Protocols from Mesoporous Silica Nanoparticles Functionalized with Macrocyclic Copper(II) Complexes

Three different mesoporous silica nano‐sized materials ( SC1 , SC2 , and SC3 ), loaded with [Ru(bipy)₃]²⁺ dye (bipy=bipyridine) and functionalized on the external surface with three macrocyclic copper(II) complexes ( C1 , C2 , and C3 ), were synthesized and characterized. When SC1 , SC2 , and SC3 were suspended in water, the entrapped [Ru(bipy)₃]²⁺ dye was free to diffuse from the inner pores to the solution. However, addition of anions induced certain degrees of pore blockage, with subsequent dye release inhibition. Small monovalent and divalent anions were unable to induce complete pore blockage, whereas bulky and highly charged anions induced marked reductions in [Ru(bipy)₃]²⁺ delivery. The best [Ru(bipy)₃]²⁺ delivery inhibitors were ATP and hexametaphosphate anions. Inhibition was ascribed to the interaction of the anions with the grafted Cu^II complexes on the surface of the SC1 , SC2 , and SC3 supports. The hexametaphosphate anion was selected to prepare two capped materials ( SC1‐mPh and SC3‐mPh ). Studies of the [Ru(bipy)₃]²⁺ dye release from solids SC1‐mPh and SC3‐mPh alone and in the presence of a collection of selected anions (HS^?, F^?, Br^?, Cl^?, I^?, CN^?, HPO₄^2?, AcO^?, citrate, NO₃^2?, HCO₃^?, SO₄^2?, and S₂O₈^2?), amino acids (alanine and histidine), thiol‐containing biomolecules (cysteine, methylcysteine, homocysteine, and glutathione (GSH)), and oxidants (H₂O₂) were performed. None of the chemicals tested, except hydrogen sulphide, was able to induce remarkable cargo delivery in both solids. The observed dye release was ascribed to a demetalation reaction of the C1 and C3 complexes induced by the hydrogen sulphide anion.     

Evidence for ion–ion interactions between peptides and anions (HSO4− or ClO4−) derived from high‐acidity acids

The existence of gas‐phase electrostatic ion–ion interactions between protonated sites on peptides ([Glu] Fibrinopeptide B, Angiotensin I and [Asn¹, Val⁵]‐Angiotensin II) and attaching anions (ClO₄^? and HSO₄^?) derived from strong inorganic acids has been confirmed by CID MS/MS. Evidence for ion–ion interactions comes especially from the product ions formed during the first dissociation step, where, in addition to the expected loss of the anion or neutral acid, other product ions are also observed that require covalent bond cleavage (i.e. H₂O loss when several carboxylate groups are present, or NH₃ loss when only one carboxylate group is present). For [[Glu] Fibrinopeptide B + HSO₄]^?, under CID, H₂O water loss was found to require less energy than H₂SO₄ departure. This indicates that the interaction between HSO₄^? and the peptide is stronger than the covalent bond holding the hydroxyl group, and must be an ion–ion interaction. The strength and stability of this type of ion‐pairing interaction are highly dependent on the accessibility of additional mobile charges to the site. Positive mobile charges such as protons from the peptide can be transferred to the attaching anion to possibly form a neutral that may depart from the complex. Alternatively, an ion–ion interaction can be disrupted by a competing proximal additional negatively charged site of the peptide that can potentially form a salt bridge with the positively charged site and thereby facilitate the attaching anion's departure. Copyright © 2014 John Wiley & Sons, Ltd.     

Mono Halogen Substituted Calix[4]pyrroles: Fine-tuning the Anion Binding Properties of Calix[4]pyrrole

Abstract

Single halogen atom (i. e. I, Br, Cl and F) substituted calix[4]pyrroles, compounds 2, 3, 4 and 5, were synthesized. Studies of these systems reveal that replacement of a single β-pyrrolic hydrogen atom can increase the anion binding ability of calix[4]pyrroles for a variety of anions (e. g. Cl^?, Br^?, H₂PO₄ ^? and HSO^? ₄) relative to normal non-halogen substituted calix[4]pyrrole 1. In the case of chloride anion, the expected relative affinity sequence of 5 > 4 > 3 > 2 was observed. This was not found to be true for Br^?, H²PO^? ₄, and HSO^? ₄. Here, the chlorine substituted calix[4]pyrrole 4 was found to display a slightly higher affinity in the case of each anion than the fluorine-bearing derivative 5. This was rationalized in terms of intermolecular NH … F hydrogen bonding interactions being present in CD₂Cl₂ solutions of 5. Support for this latter conclusion came from concentration and temperature-dependent NMR spectroscopic studies.

A matched set of mono halogen substituted calix[4]pyrroles was used to study in detail, the extent to which halogen substituents may be used to fine-tune the anion binding properties of calix[4]pyrroles.     

Synthese und Struktur von Hydrogensulfaten des Typs M(HSO4)(H2SO4) (M = Rb,Cs und NH4)

Synthesis and Structure of Hydrogen Sulfates of the Type M(HSO₄)(H₂SO₄) (M = Rb, Cs and NH₄) From the binary systems M₂SO₄/H₂SO₄ (M = Rb, Cs, NH₄), three new hydrogen sulfates of the type M(HSO₄)(H₂SO₄) could be synthesized and structural characterized. The rubidium and caesium compounds are isotypic whereas NH₄(HSO₄)(H₂SO₄) is topologically very similar to both. All three compounds crystallize with nearly identical cell parameters [Rb: a = 7.382(1), b = 12.440(2), c = 7.861(2), β = 93.03(3); Cs: a = 7.604(1), b = 12.689(2), c = 8.092(2), β = 92.44(3); NH₄: a = 7.521(3), b = 12.541(5), c = 7.749(3), β = 92.74(3)], in the monoclinic space group P2₁/c, There exist two kinds of SO₄-tetrahedra: HSO₄^? anions (S1) and H₂SO₄-molecules (S2). The HSO₄^? anions form hydrogen bridged zigzag chains. In the case of the Rb and Cs compounds, the H₂SO₄ molecules connect these chains forming double layers. The metal atoms are coordinated by 9 O-atoms with M? O-distances of 2.97 – 3.39 Å (Rb) and 3.13 – 3.51 Å (Cs). In the ammonium compound additional hydrogen bonds are formed originating from the NH₄⁺ cation. This finally leads to the formation of S2? NH₄⁺ chains (parallel to the S1 chains) as well as to a three-dimensional connection of both kinds of chains.