Extraction of thorium(IV) by a mixture of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone and tri-n-octyl phosphine oxide

The extraction behavior of Th(IV) from dilute nitric as well as perchloric acid medium using 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) and its mixture with tri-n-octyl phosphine oxide (TOPO) was investigated. The species of the type Th(X)(PMBP)₃·(HPMBP) and Th(X)(PMBP)₃·(TOPO) were extracted for the binary and ternary extraction systems, respectively, where X=NO₃− or ClO₄−. The presence of 1.25·10⁻⁵M Th carrier in the aqueous phase resulted in the extracted species of the type of Th(PMBP)₄ and Th(PMBP)₄·(TOPO), respectively. The extraction constant (logk _ex ) for the binary species Th(PMBP)₄ was found to be 6.89±0.01 while the overall extraction constant (logK) for the ternary species Th(PMBP)₄·(TOPO) was calculated to be 13.17±0.06.     

Extraction of Np(IV) and HNO3 by Triphenylphosphine Oxide

The extraction of Np(IV) and HNO₃ from aqueous solutions containing only this acid (1–10 M) has been studied with solutions of triphenylphosphine oxide (TPPO) in carbon tetrachloride, benzene and chloroform. The species TPPO · HNO₃ and Np(NO₃)₄ · 2TPPO are the most predominently extracted species; there is also experimental evidence for Np(NO₃)₄ · TPPO. An equilibrium “constant” of 0.7 is calculated for the extraction of HNO₃ with solutions of the reagent in CCl₄. This value is found to fit also the measurements on TPPO in C₆H₆. The position of the solvent CHCl₃ is reversed, compared with the extraction of the acid and Np(IV) by the solvents CCl₄ and C₆H₆, respectively.     

Synergistic extraction of U(VI) and Th(IV) from nitric acid with 4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione (HBMPPT) and tri-n-octylphosphine oxide (TOPO) in toluene

The extractant HBMPPT (4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione) was synthesized from HBMPP. Its m.p. was 106–108°C. The synergistic extraction of U(VI) and Th(IV) from nitric acid solution by HBMPPT and TOPO in toluene was studied. The extraction ability of HBMPPT was not so high as that of its parent (HBMPP), but when a little tri-n-octylphosphine oxide (TOPO) was added the ability to extract U(VI) and Th(IV) was seriously improved. The synergistic extracted complexes may be presented as UO₂NO₃·BMPPT·TOPO and UO₂(BMPPT)₂·TOPO for U(VI), and Th(NO₃)₃·BMPPT·TOPO and Th(NO₃)₂(BMPPT)₂·TOPO for Th(IV) respectively.     

Nonaqueous Liquid-Liquid Extraction. Extraction of Zinc from Methanol-Water Solution of Chloride by Trioctylphosph1Ne Oxide in Decaline

Abstract

The distribution of zinc was studied between the decaline phase having tri-n-octylphosphine oxide (TOPO) and the methanol-water phase (4:1 in molar ratio) having chloride ion, and the stability constants of zinc with chloride in the methanolic solution were calculated from the extraction experiments (K₁ = 2.4 × 10³, K₂ = 1.9 × 10²at 298°K).     

金(Ⅲ)与某些中性氧配体(RnXO)形成的配合物及其表征

合成了金(Ⅲ)与七种中性氧配体RnXO(R=辛基或苯基;X=N,P,As和S;n=2,3)形成的十种配合物,可概括为两种类型:H(RnXO)x·AuCl_4·Sy(RnXO=TONO、TOPO、TPPO、DOSO、DPSO、TPAsO和bipyO_2;S=乙醇或水;x=1,2,3,y=0,1,2或3)和[Au(L)X_2](L=bipyO_2;X=Cl或Br)。用元素分析、摩尔电导、紫外和红外光谱、核磁共振和热重分析等方法测定了它们的组成和性质,并对其可能的结构也进行了讨论。     

Rate constants for the reactions of O3 and OH radicals with a series of alkynes

Rate constants for the reactions of O₃ and OH radicals with acetylene, propyne, and 1-butyne have been determined at room temperature. The rate constants obtained at 294 ± 2 K for the reactions of O₃ with acetylene, propyne, and 1-butyne were (7.8 ± 1.2) × 10^?21 cm³/molecule · s, (1.43 ± 0.15) × 10^?20 cm³/molecule · s, and (1.97 ± 0.26) × 10^?20 cm³/molecule · s, respectively. The rate constants at 298 ± 2 K and atmospheric pressure for the reactions with the OH radical, relative to a rate constant for the reaction of OH radicals with cyclohexane of 7.57 × 10^?12 cm³/molecule · s, were determined to be (8.8 ± 1.4) × 10^?13 cm³/molecule · s, (6.21 ± 0.31) × 10^?12 cm³/molecule · s, and (8.25 ± 0.23) × 10^?12 cm³/molecule · s for acetylene, propyne, and 1-butyne, respectively. These data are discussed and compared with the available literature rate constants.     

喜树碱的电还原特性及应用研究

The voltammetric behavior of camptothecin （CPT） in Britton-Robinson （B-R） buffer solutions （pH 2.09-9.07） was studied by the means of linear sweep voltammetry （LSV）, cyclic voltarnmetry （CV） and normal pulse voltammetry （NPV） at a hanging mercury drop electrode. In different pH range of B-R buffer solutions, CPT could cause three reduction waves. In B-R buffer solutions （pH 2.09-5.46）, wave P1 yielded by CPT was a two-electron wave. Between pH 6.01 and 9.07, CPT could yield two reduction waves P2 and P3. In addition, the pure CPT obtained from camptotheca acumina grown only in China was determined by NPV, and a linear response was observed in the range of 2.0 × 10^-3-4.0 × 10^-2 mmol·L^-1 with a 0.9991 correlation coefficient and a 8.0 × 1^-4 mmol·L^-1 detection limit for CPT.     

Kinetics of the reactions of O3 and OH radicals with furan and thiophene at 298 ± 2 K

Rate constants for the reactions of O₃ and OH radicals with furan and thiophene have been determined at 298 ± 2 K. The rate constants obtained for the O₃ reactions were (2.42 ± 0.28) × 10^?18 cm³/molec·s for furan and <6 ×10^?20 cm³/molec·s for thiophene. The rate constants for the OH radical reactions, relative to a rate constant for the reaction of OH radicals with n-hexane of (5.70 ± 0.09) × 10^?12 cm³/molec·s, were determined to be (4.01 ± 0.30) × 10^?11 cm³/molec·s for furan and (9.58 ± 0.38) × 10^?12 cm³/molec·s for thiophene. There are to date no reported rate constant data for the reactions of OH radicals with furan and thiophene or for the reaction of O₃ with furan. The data are compared and discussed with respect to those for other alkenes, dialkenes, and heteroatom containing organics.     

Electrochemical Responses and Sensitivities of Films Based on Multi-Walled Carbon Nanotubes in Aqueous Solutions

Novel films consisting of multi-walled carbon nanotubes (MWCNTs) were fabricated by means of chemical vapor deposition with decomposition of either acetonitrile (ACN) or benzene (BZ) using ferrocene as catalyst. The electrochemical responses of MWCNT-based films towards the ferrocyanide/ferricyanide, [Fe(CN)₆]^3?/4? redox couple were probed by means of cyclic voltammetry and electrochemical impedance spectroscopy at 25.0?±?0.5?°C. Both MWCNT-based films exhibit Nernstian response towards [Fe(CN)₆]^3?/4? with some slight kinetic differences. Namely, heterogeneous electron transfer rate constants lying in ranges of 2.69?×?10^?2?C1.7?×?10^?3 and 9.0?×?10^?3?C2.6?×?10^?3?cm·s^?1 were obtained at v?=?0.05?V·s^?1 for MWCNT_ACN and MWCNT_BZ, respectively. The detection limit of MWCNT_ACN, estimated to be about 4.70?×?10^?7?mol·L^?1 at v?=?0.05?V·s^?1, tends to become slightly poorer with the increase of the scan rate, namely at v?=?0.10?V·s^?1 the detection limit of 1.70?×?10^?6?mol·L^?1 was determined. Slightly poorer response ability was exhibited by MWCNT_BZ; specifically the detection limits of 1.57?×?10^?6 and 4.35?×?10^?6?mol·L^?1 were determined at v?=?0.05 and v?=?0.10?V·s^?1, respectively. The sensitivities of MWCNT_ACN and MWCNT_BZ towards [Fe(CN)₆]^3?/4? were determined as 1.60?×?10^?7 and 1.51?×?10^?7?A·L·mol^?1·cm^?2, respectively. The excellent electrochemical performance of MWCNT_ACN is attributed to the presence of incorporated nitrogen in the nanotube??s structure.     

31P-NMR study of the organophosphorous complexes of uranium(VI)

The intermolecular ligand exchange in uranyl nitrate complexes with TBP and TOPO is studied by³¹P-NMR. The constant rates at 25°C in CCl₄ are: (8.47±1.86)·10³ s^?1 for U-TBP and (1.3±0.04)·10⁴M^?1·s^?1 for U-TOPO system. The very similar activation parameters values of the ligand exchange suggest the same mechanism for both systems, namely an one-step interchange mechanism. The differences between the systems regarding the rate equations and the extraction properties are discussed.     

Luminescence and magnetic properties of mixed-ligand europium trifluoroacetates

The luminescence and magnetic properties of mixed-ligand europium trifluoroacetates with nitrogen- and phosphorus-containing neutral ligands [Eu(TFA)₃ · 3H₂O]₂ and Eu(TFA)₃ · 2D · nH₂O were studied (here TFA is the trifluoroacetic acid anion, and D is Phen (1,10-phenanthroline), n = 1; DMF (dimethylformamide), n = 1; or TPPO (triphenylphosphine oxide), n = 3). The molar magnetic susceptibility increased in the series of complex compounds Eu(TFA)₃ · 2Phen · H₂O < [Eu(TFA)₃ · 3H₂O]₂ < Eu(TFA)₃ · 2DMF · H₂O < Eu(TFA)₃ · 2TPPO · 3H₂O. Correlations were found between the luminescent and magnetic characteristics of the complex compounds.     

Luminescent and triboluminescent properties of europium(III) hexafluoroacetylacetonate and trifluoroacetate complexes with triphenylphosphine oxide

Crystalline and strongly luminescent complexes of europium hexafluoroacetylacetonate and trifluoroacetate with triphenylphosphine oxide of Eu(HFAA)₃ · 2TPPO and [Eu(TFA)₃ · 2TPPO(H₂O)]₂ composition are synthesized that demonstrating triboluminescent properties. It is established that the measured photoluminescence and triboluminescence spectra of these noncentrosymmetric complex compounds are identical, due to the characteristic f-f-luminescence of the europium(III) ion.     

The electron swarm method as a tool to investigate multi-body electron attachment processes

The electron swarm method has been used for the investigation of multi-body thermal electron attachment process. Ethylene, carbon dioxide and their mixtures were used as carrier gases. The rate constant for the reaction of thermal electrons with SF₆ has been measured and found to be (2.5±0.2) × 10^-7 cm³·mol^-1·s^-1. The mechanism and kinetics of thermal electron capture by N₂O was investigated in the mixtures with C₂H₄ and CO₂. A mechanism involving neutral van der Waals molecules (N₂O·CO₂) has been proposed and the rate constants calculated to be 1.9 × 10^-10 cm³·mol^-1·s^-1 for the formation of (N₂O·CO₂) and 1.8 × 10^-30 cm⁶·mol^-2·s^-1 for the three-body reaction with CO₂ as a stabilizing agent.     

Electrosynthesis of Poly(azure B) from Sulfuric Acid Solution

Electrochemical polymerization of azure B from sulfuric acid solution was carried out by using cyclic voltammetry. The electrolytic solution consisted of 5.0 mmol · dm^?3 azure B and 0.3 mol · dm^?3 H₂SO₄. The temperature for polymerization was controlled at 20°C. A blue film, i.e., poly(azure B) was formed on a platinum foil and had a electrochemical reversibility, stability and a fast charge transfer ability in the 0.5 mol · dm^?3 Na₂SO₄ with pH ≤4.0 solution. The currents of both anodic and cathodic peaks are proportional to υ^1/2 at the scan rate (υ) region of 25 and 600 mV · s^?1 on the cyclic voltammograms. The conductivity of poly(azure B) is 2.8×10^?6 S · cm^?1 at 20°C. The UV‐visible spectrum and Raman spectrum of the polymer are different from those of the monomer. A possible polymerization mechanism of azure B was also proposed.     

Oxyalkylene polymers with alkylsulfonylmethyl side chains: Gas barrier properties

Gas barrier properties of alkylsulfonylmethyl-substituted poly(oxyalkylene)s are discussed. Oxygen permeability coefficients of three methylsulfonylmethyl-substituted poly(oxyalkylene)s, poly[oxy(methylsulfonylmethyl)ethylene] (MSE), poly[oxy(methylsulfonylmethyl)ethylene-co-oxyethylene] (MSEE), and poly[oxy-2,2-bis (methylsulfonylmethyl)trimethylene oxide] (MST) were measured. MSEE, which has the most flexible backbone of the three polymers, had an oxygen permeability coefficient at 30°C of 0.0036 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa higher than that of MSE, 0.0014 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa, because the former polymer's T_g was near room temperature. MST with two polar groups per repeat unit and the highest T_g showed the highest oxygen permeability, 0.013 × 10⁻¹³ cm³(STP) · cm/cm²·s·Pa, among the three polymers, probably because steric hindrance between the side chains made the chain packing inefficient. As the side chain length of poly[oxy(alkylsulfonylmethyl)ethylene] increased, T_g and density decreased and the oxygen permeability coefficients increased. The oxygen permeability coefficient of MSE at high humidity (84% relative humidity) was seven times higher than when it was dry because absorbed water lowered its T_g. At 100% relative humidity MSE equilibrated to a T_g of 15°C after 2 weeks. A 50/50 blend of MSE/MST had oxygen barrier properties better than the individual polymers (O₂ permeability coefficient is 0.0007 × 10⁻¹³ cm³(STP)·cm/cm² ·s·Pa), lower than most commercial high barrier polymers. At 100% relative humidity, it equilibrated to a T_g of 42°C, well above room temperature. These are polymer systems with high gas barrier properties under both dry and wet conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 75–83, 1998     

Synthesis,Characterisation of Novel Polyaniline Nanomaterials and Application in Amperometric Biosensors

Summary: Anthracene sulfonic acid doped polyaniline nanomaterials were prepared through the chemical oxidative polymerisation process. Ammonium peroxydisulfate (APS) was employed as oxidant. Scanning electron microscopy (SEM) results show the resultant polyaniline (PANi) materials exhibited nanofibrillar morphology with diameter sizes less than 300 nm. Using the nanofibrillar PANI, amperometric biosensors for H₂O₂ and erythromycin were constructed through the drop-coating technique. Anthracene sulfonic acid (ASA) doped PANi and the test enzymes horseradish peroxidase, (HRP), or cytochrome P₄₅₀ 3A4, (CYP₄₅₀3A4) were mixed in phosphate buffer solution before drop coating onto the electrode. The resultant biosensors displayed typical Michaelis-Menten behaviour. The apparent Michaelis-Menten constant obtained was 0.18 ± 0.01 mM and 0.80 ± 0.02 µM L⁻¹ for the peroxide and erythromycin biosensor respectively. The sensitivity for the peroxide sensor was 3.3 × 10⁻³ A · cm⁻² · mM⁻¹, and the detection limit was found to be 1.2 × 10⁻² mM respectively. Similarly, the sensitivity for the erythromycin sensor was in the same order at 1.57 × 10⁻³ A · cm⁻² · mM⁻¹ and detection limit was found to be 7.58 × 10⁻² µM.     

Mechanism and kinetics of the production of hydroxymethyl hydroperoxide in ethene/ozone/water gas-phase system

The mechanism and kinetics of the production of hydroxymethyl hydroperoxide (HMHP) in ethene/ ozone/water gas-phase system were investigated at room temperature (298±2 K) and atmospheric pressure (1×105 Pa). The reactants were monitored in situ by long path FTIR spectroscopy. Peroxides were measured by an HPLC post-column fluorescence technique after sampling with a cold trap. The rate constants (k3) of reaction CH2O2 H2O→HMHP (R3) determined by fitting model calculations to ex-perimental data range from (1.6―6.0)×10?17 cm3·molecule?1·s?1. Moreover, a theoretical study of reac-tion (R3) was performed using density functional theory at QCISD(T)/6-311 (2d,2p)//B3LYP/6-311 G(2d, 2p) level of theory. Based on the calculation of the reaction potential energy surface and intrinsic reac-tion coordinates, the classic transitional state theory (TST) derived k3 (kTST), canonical variational tran-sition state theory (CVT) derived k3 (kCVT), and the corrected kCVT with small-curvature tunneling (kCVT/SCT) were calculated using Polyrate Version 8.02 program to be 2.47×10-17, 2.47×10-17 and 5.22×10-17 cm3·molecule-1·s-1, respectively, generally in agreement with those fitted by the model.     

2,2′-Dihydroxybenzophenone thiosemicarbazone as a spectrophotometric reagent for the determination of copper,cobalt, nickel,and iron trace amounts in mixtures without previous separations

2,2′-Dihydroxybenzophenone thiosemicarbazone forms complexes with Cu(II) (λ_max = 385 nm, ? = 8.60 × 10³ liter · mol^?1 · cm^?1); Ni(II) (λ_max = 380 nm, ? = 15.4 × 10³ liter · mol^?1 · cm^?1); Co(II) (λ_max = 380 nm, ? = 12.3 × 10³ liter · mol^? · cm^?1); and Fe(III) (λ_max = 365 nm, ? = 7.9 × 10³ liter · mol^?1 · cm^?1) and have been applied to the analysis of these metal ions in binary, ternary, and quaternary mixtures. The determination procedures are based exclusively on the different pH values of the formation complexes, hence the extraction step is not necessary.     

Oxidative DNA cleavage by Cu(II) complexes of 1,10-phenanthroline-5,6-dione

A dimeric dichloro-bridged copper(II) complex [Cu₂(pdon)₂Cl₄] · 2DMF (1) and two mononuclear copper(II) complexes [Cu(pdon)(DMSO)Cl₂] · DMSO · H₂O (2) and [Cu(pdon)₃] · (ClO₄)₂ · 2.25CH₃CN · 6H₂O (3) (pdon = 1,10-phenanthroline-5,6-dione) have been synthesized and characterized. Variable-temperature magnetic susceptibility studies indicate the existence of weak anti-ferromagnetic coupling in the binuclear complex. The interaction of these complexes with CT-DNA (calf thymus DNA) has been studied using absorption and emission spectral methods. The apparent binding constants (K _app) for 1, 2 and 3 are 5.20 × 10⁵, 2.68 × 10⁵ and 7.05 × 10⁵ M^?1, respectively, showing moderate intercalative binding modes. All of these complexes cleave plasmid DNA to nicked DNA in a sequential manner as the concentration or reaction time is increased. The cleavage mechanism between the complex and plasmid DNA is likely to involve singlet oxygen ¹O₂ and ?OH as reactive oxygen species.     

The kinetics of ClO formation in the flash photolysis of chlorine–oxygen mixtures

The production of ClOO and ClO radicals following the flash photolysis of chlorine + oxygen mixtures has been studied. For the mechanism the following kinetic parameters were measured: k₃K = 1.3 × 10¹⁰ l²/mol²·sec; k₂/k₃ = 17; and k₃/?(ClOO; 250 nm) = 9.7 × 10⁵ cm/sec. Then k₃ = 5.9 × 10⁹ l/mol·sec, k₂ = 1.0 × 10¹¹ l/mol·sec, and ?(ClOO; 250 nm) = 6.1 × 10³ l/mol·cm. From limits established for the equilibrium constant K, ΔH°_f (ClOO) = 94 ± 2 kJ/mol.