Electrochemical sensitive determination of acetaminophen in pharmaceutical formulations at iron oxide/graphene composite modified electrode

Acetaminophen (AC) is one of the most commonly prescribed analgesic and antipyretic drug, which is considered to be safe as well as effective. Rational use of AC does not pose any toxicity or adverse effects, however, an overdose or prolonged use could lead to nephrotoxicity and severe hepatoxicity. Thus, monitoring of AC is essential for drug safety. In this work, a facile Fe₂O₃/reduced graphene oxide (Fe₂O₃/RGO) nanocomposite was synthesized for improved electrochemical detection of AC. The material was synthesized through a simple one-step process. For characterization of synthesized Fe₂O₃/RGO composite, energy-dispersive X-ray spectroscopy (EDX), field emission-scanning electron microscopy (FE-SEM) and electrochemical impedance spectroscopy (EIS) were employed. To verify the electrochemical performance of Fe₂O₃/RGO nanocomposite, GCE was modified with this nanocomposite and utilized for quantification of AC. The detection limit of AC was 21 nM in a linear range from 1.0 × 10⁻⁷ to 74 × 10⁻⁶ M. Furthermore, the sensor also unveiled good stability, promising sensitivity and selectivity. Hence, Fe₂O₃/RGO could be applied as a sensing material for electrochemical detection of AC. Finally, the analytical utility of the method was also verified in human urine and drug samples with some preliminary treatments.     

Crystallinity engineering of Au nanoparticles on graphene for in situ SERS monitoring of Fenton-like reaction

Fabrication of multifunctional nanoplatform to in situ monitor Fenton reaction is of vital importance to probe the underlying reaction process and design high-performance catalyst.Herein,a hybrid catalyst comprising of single-crystalline Au nanoparticles（SC Au NPs） on reduced graphene oxide（RGO） sheet was prepared,which not only exhibited an excellent ¹ O₂ mediated Fenton-like catalytic activity in promoting rhodamine 6 G（R6 G） degradation by activating H₂ O_...     

基于Co3O4纳米粒子的“串联酶”活性检测葡萄糖的表面增强拉曼光谱策略

采用一种简单的湿化学法合成Co₃O₄纳米粒子(NPs),并将其作为一种"串联酶"(同时具有类过氧化物酶和类葡萄糖氧化酶活性)用于过氧化氢(H₂O₂)和葡萄糖的表面增强拉曼散射(SERS)光谱检测。作为一种灵敏的SERS底物,在pH=4.0的NaAc缓冲液条件下,Co₃O₄NPs可以催化葡萄糖和O₂生成葡萄糖酸和H₂O₂。然后H₂O₂可以氧化3,3′,5,5′-四甲基联苯胺(TMB),形成蓝色氧化产物氧化TMB(oxTMB),其在1188、1330、1610 cm^-1处表现出强烈的SERS信号。因此,我们开发了一种新的SERS策略来分析葡萄糖,检测限为1×10^-10mol·L^-1,表明Co₃O₄NPs具有生物传感器、免疫分析和医学研究的潜力。     

A 2D cadmium metal–organic framework: Synthesis,structure and luminescence sensing for chromate,permanganate, cupric,silver and ferric

A multi-responsive Cd metal–organic framework {[Cd (ttpe)(H₂O)(ip)]•4H₂O•DMAC}_n ( 1•4H ₂ O•DMAC ) was synthesized using hydrothermal method (ttpe = 1,1,2,2-tetra(4-(1H-1,2,4-triazol-1-yl)phenyl)ethylene, ip = isophthalate, DMAC = N,N-dimethylacetamide), and characterized. 1 exhibits a 2D (4,4) network. The luminescent sensing experimrnts showed that 1•4H ₂ O•DMAC as a new MOF luminescent sensor can detect Cr₂O₇²⁻, CrO₄²⁻, MnO₄⁻, Cu²⁺, Ag⁺ and Fe³⁺ in aqueous solution with simultaneously high efficiency and high sensitivity. The quenching constants K_sv for Cr₂O₇²⁻, CrO₄²⁻, MnO₄⁻, Cu²⁺, Ag⁺ and Fe³⁺ are 4.231 × 10⁴ M⁻¹, 2.471 × 10⁴ M⁻¹, 6.459 × 10³ M⁻¹, 7.617 × 10³ M⁻¹, 1.563 × 10⁴ M⁻¹ and 3.574 × 10⁴ M⁻¹, respectively. The detection limits are 0.094 μM for Cr₂O₇²⁻, 0.108 μM for CrO₄^{2 −} , 0.346 μM for MnO₄⁻, 0.302 μM for Cu²⁺, 0.221 μM for Ag ⁺ , and 0.100 μM for Fe³⁺. 1•4H ₂ O•DMAC exhibits high photocatalytic efficiency for degradation of methylene blue under visible light irradiation.     

Non-enzymatic hydrogen peroxide sensor based on a nanoporous gold electrode modified with platinum nanoparticles

A novel non-enzymatic electrochemical sensor based on a nanoporous gold electrode modified with platinum nanoparticles was constructed for the determination of hydrogen peroxide (H₂O₂). Platinum nanoparticles exhibit good electrocatalytic activity towards hydrogen peroxide. The nanoporous gold (NPG) increases the effective surface area and has the capacity to promote electron-transfer reactions. With electrodeposition of Pt nanoparticles (NPs) on the surface of the nanoporous gold, the modified Au electrode afforded a fast, sensitive and selective electrochemical method for the determination of H₂O₂. The linear range for the detection of H₂O₂ was from 1.0 × 10^?7 M to 2.0 × 10^?5 M while the calculated limit of detection was 7.2 × 10^?8 M on the basis of the 3σ/slope (σ represents the standard deviation of the blank samples). These findings could lead to the widespread use of electrochemical sensors to detect H₂O₂.     

A Reliable Electrochemical Sensor Based on Functionalized Magnetite Nanoparticles for Over-the-counter Allergy Medication Abuse Sensing in Biological Fluids

Diphenhydramine (DIPH) has become one of the world‘s most widely abused over-the-counter medications. In addition to relieving allergy symptoms, it is also recognized for causing elevated energy and mild euphoric effects. The U.S. Food and Drug Administration (FDA) has recently warned about serious problems at high doses including heart problems, seizures, coma or even death among addicted teenagers. Herein, a simple, cost-effective, and reliable nanocomposite based electrochemical sensor was designed for DIPH quantification in biological fluids. Introducing the functionalized Fe₃O₄ nanoparticles (NPs) into the inner-filling solution and the PVC-based ion sensing membrane has been employed and compared to the classical potentiometric approach. The nanoparticles were incorporated to endorse in situ cooperative ion-pairing interaction between the ionophore and DIPH, and to improve the selectivity and detection limit (9.5×10⁻⁸ M). Nernstian potentiometric response was achieved for DIPH over the concentration range of 1.0×10⁻⁷ to 1.0×10⁻² M with a slope of 59.0±0.2 mV/decade. Inherent merits of the proposed sensor include fast response time (6 s), superior stability (60 days) with higher sensitivity and selectivity towards DIPH without interference from co-formulated drugs and several ions commonly found in biological matrices. The proposed sensor was successfully applied to the potentiometric determination of DIPH in different biological fluids (plasma and human milk) with an average recovery of 99.06±1.95 % and 100.34±1.92 %, respectively. As a consequence, the developed ISE might be the ideal choice for in-line DIPH measurements in plasma samples to identify overdose ingestion and its related symptoms, as well as for quality-control laboratories without prior treatments.     

Enhanced Electrochemiluminescence of TiO2 Nanoparticles Modified Electrode by Nafion Film and Its Application in Selective Detection of Dopamine

In this work, a simple and effective approach to obtain stable, nontoxic and strong electrochemiluminescence (ECL) interfaces is provided by coating TiO₂ nanoparticles (NPs) modified glassy carbon electrode (GCE) surfaces with Nafion. Unlike a decrease of the current resulting from the blocked diffusion usually displayed in electrochemical processes by Nafion coating, a Nafion/TiO₂ NPs modified electrode not only shows a highly stable ECL, but also shows an 8‐fold increase of ECL intensity and a reduction of the overpotential of ca. 300 mV in the presence of K₂S₂O₈ as co‐reactant, compared with those of bare TiO₂ NPs modified electrodes. The roles of Nafion coating on TiO₂ NPs in the ECL process are proposed to be twofold: to provide refuge for the free radicals and to enhance the electron‐hole recombination. Benefiting from its excellent ECL performance, the cationic exchange function of Nafion and the susceptible to being oxidized performance of dopamine (DA) by holes, the Nafion/TiO₂ composite electrode could be used to sensitively and selectively detect DA with a detection limit of 1.0×10^?11 M and a linear range of 1.0×10^?11–6.0×10^?7 M. The coexisting anionic species such as excess ascorbic acid show little interference on DA detection.     

Detection of Dexamethasone Sodium Phosphate in Blood Plasma: Application of Hematite in Electrochemical Sensors

We studied sensor application of a graphene oxide and hematite (α‐Fe₂O₃/GO) composite electrode well‐characterized by the SEM and XRD. Through differential pulse voltammetry (DPV), oxidation of dexamethasone sodium phosphate (DSP) was studied at the surface of a glassy carbon electrode (GCE) modified with graphene oxide nanosheets (GO) and the α‐Fe₂O₃/GO composite. The values of the transfer coefficient (α) and the diffusion coefficient (D) of DSP were 0.5961 and 4.71×10^?5 cm² s^?1 respectively. In the linear range of 0.1–50 μM, the detection limit (DL) was 0.076 μM. In the second step, a GCE was modified with α‐Fe₂O₃/GO composite and the DSP measurement step was repeated to analyzed and compare the effects of hematite nanoparticles present on graphene oxide surfaces. According to the results, α and D were 0.52 and 2.406×10^?4 cm² s^?1 respectively and the DL was 0.046 μM in the linear range of 0.1–10.0 μM. The sensor is simple, inexpensive and uses blood serum.     

On‐line Liquid‐liquid Extraction Coupled to a Reversed Micellar‐mediated Chemiluminescence Detection System: Application to the Determination of Amino/Nitroaromatic Compounds

A simple and fast flow method for the trace level determination of p‐toluidine, 2‐methyl‐5‐nitroaniline, and 2,4‐dinitroaniline in aqueous samples is reported. These amino/nitroaromatics are related to trinitrotoluene (TNT) and appear during the degradation process of the explosive. The chemical principles of ion‐pair formation and liquid‐liquid extraction are applied: In aqueous acidic medium, the protonated analyte [HA]⁺ makes an ion‐pair with the tetrachloroaurate(III) ion, followed by on‐line ion‐pair extraction into the dichloromethane carrier used. After membrane separation, the CH₂Cl₂ containing the ion‐pair, [HA]⁺[AuCl₄]⁻, is mixed with the reversed micellar luminescent reagent of luminol (in 0.3 M Na₂CO₃) prepared from cetyl‐trimethylammonium chloride in CH₂Cl₂‐cyclohexane and the [AuCl₄⁻‐luminol chemiluminescence (CL) output is recorded. The detection limits (S/N> 3) are: p‐toluidine, 1.0 × 10⁻⁴M; 2‐methyl‐5‐nitroaniline, 1.0 × 10⁻⁷ M; 2,4‐dinitroaniline, 1.0 × 10⁻⁷ M, while the calibration curves are linear between 1.0 × 10⁻⁴ — 1.0 × 10⁻² M for all the compounds. Although spectral studies indicated the formation and extraction of a very small amount of the ion‐pair species, the reversed micellar‐mediated CL detection system provides an alternative procedure for the determination of degradation products of the explosive TNT in environmental aqueous samples.     

Novel Designing of Chemically Modified Electrode (CME) of the Bio-MOF-1 for the Detection of Dopamine Based on Inhibition of [Ru(bpy)3]2+/DBAE System

Metal organic frameworks (MOFs) have attracted extensive attention in electrochemical research fields due to their high surface area and controlled porosity. Current study is design to investigate the ECL performance of the chemically modified electrode (CME) based on the bio-MOF-1, a porous zinc-adenine framework, which loaded ruthenium complex and employed for the detection of dopamine (DA). The composite material [Ru(bpy)₃]²⁺@bio-MOF-1 (Ru-bMOF) modified carbon glassy electrode (Ru-bMOF/GCE) exhibited an excellent ECL performance having a linear co-efficient response (R²=0.9968) for 2-(dibutyl amino) ethanol (DBAE), a classical ECL co-reactant was obtained over a concentration range of 1.0×10⁻⁹ M to 1.0×10⁻⁴ M in 0.10 M pH=6.0 phosphate buffer solution (PBS). Furthermore, DA was detected based on its inhibition effect on [Ru(bpy)₃]²⁺/DBAE system. Compared to traditional analytical methods, this method has various advantages such as simple electrode preparation, quick response, high reproducibility (RSD<2.0 %), low limit of detection (LOD=1.0×10⁻¹⁰ mol/L). This chemical investigated modified electrode had exploited potential for detection of DA.     

Ultra-small CuS Nanoparticles as Peroxidase Mimetics for Sensitive and Colorimetric Detection of Uric Acid in Human Serum

As the main final products of the purine metabolism in human body, uric acid (UA) usually presents in serum and urine. Thus, the level of UA in biology is closely related to human health. In this work, the ultra-small CuS nanoparticles (NPs) were demonstrated to possess intrinsic peroxidase-like activity towards 3,3',5,5'-tetramethylbenzidine (TMB) substrate in the presence of H₂O₂, which yielded the blue oxidized TMB (oxTMB) with strong absorption at 653 nm. Furthermore, H₂O₂ could be produced by the enzymatic reaction between UA and uricase to yield the blue oxTMB with the peroxidase mimetics activity of CuS NPs, which provided a sensitive and colorimetric method for UA detection with a linear range from 1.0 × 10^?6 M to 1.0 × 10^?4 M and a detection limit of 1.0 × 10^?7 M. Moreover, the proposed method was successfully applied to the determination of UA in human serum samples, which supplied a similar result to the clinical method.     

Direct Electrochemistry of Hemoglobin Based on Fe3O4@SiO2 Nanoparticles Modified Electrode

A biosensor based on hemoglobin‐Fe₃O₄@SiO₂ nanoparticle bioconjunctions modified indium‐tin‐oxide (Hb/Fe₃O₄@SiO₂/ITO) electrode was fabricated to determine the concentration of H₂O₂. UV‐vis absorption spectra, fourier transform infrared (FT‐IR) spectroscopy, cyclic voltammetry (CV) and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the bioconjunction of Fe₃O₄@SiO₂ with Hb. Experimental results demonstrate that the immobilized Hb on the Fe₃O₄@SiO₂ matrix retained its native structure well. In addition, Fe₃O₄@SiO₂ nanoparticles (NPs) are very effective in facilitating electron transfer of the immobilized enzyme, which can be attributed to the unique nanostructure and larger surface area of the Fe₃O₄@SiO₂ NPs. The biosensor displayed good performance for the detection of H₂O₂ with a wide linear range from 2.03×10^?6 to 4.05×10^?3 mol/L and a detection limit of 0.32 µmol/L. The resulting biosensor exhibited fast amperometric response, good stability, reproducibility, and selectivity to H₂O₂.     

Electrochemical DNA Biosensor Based on Magnetite/Multiwalled Carbon Nanotubes/Chitosan Nanocomposite for Bacillus Cereus Detection of Potential Marker for Gold Prospecting

A label‐free DNA biosensor based on magnetite/multiwalled carbon nanotubes/chitosan (Fe₃O₄/MWCNTs‐COOH/CS) nanomaterial for detection of Bacillus cereus DNA sequences was fabricated. Negatively charged DNA was electrostatically adsorbed onto materials by protonation of positively charged chitosan under acidic conditions. The electrode surface and hybridization process were carried out by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Under optimal conditions, the biosensor showed a good linear relationship between peak currents difference (ΔI) and logarithm of the target DNA concentration (Log C) ranging from 2.0×10⁻¹³ to 2.0×10⁻⁶ M with a detection limit of 2.0×10⁻¹⁵ M (signal/noise ratio of 3). The biosensor also revealed an excellent selectivity to three‐base, completely mismatched and completely matched DNA. This is a simple, fast and friendly method with a low detection limit for the detection of Bacillus cereus specific DNA compared with previously reported electrochemical DNA biosensor. Furthermore, the DNA biosensor may lead to the development of a technology for gold prospecting in the wild.     

Hydrogen Peroxide Biosensor Based on Immobilization of Hemoglobin on Au@Ag Nanoparticles Modified Carbon Ionic Liquid Electrode

A hydrogen peroxide (H₂O₂) biosensor based on the combination of Au@Ag core‐shell nanoparticles with a hemoglobin‐chitosan‐1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate (Hb‐CHIT‐BMIM×BF₄) composite film was prepared. UV‐vis spectroscopy and transmission electron microscopy confirmed a core‐shell nanostructure of Au@Ag nanoparticle was successfully obtained. Cyclic voltammetric results showed a pair of well‐defined redox peaks appeared with the formal potential (E^O′) of ‐0.301 V (versus Ag/AgCl reference electrode) and the peak‐to‐peak separation (ΔE_p) was 84 mV in 0.1 M phosphate buffer solutions. Due to the synergetic effect of Au@Ag core‐shell nanoparticles and Hb‐CHIT‐BMIM×BF₄, the biosensor exhibited good electrocatalytic activity to the reduction of H₂O₂ in a linear range from 1.0 × 10^?6 to 1.0 × 10^?3 M with a detection limit of 4 × 10^?7 M (S/N = 3). The apparent Michaelis‐Menten constant (K_M) was estimated to be 4.4 × 10^?4 M, showing its high affinity. Thus, the study proved that the combination of Au@Ag core‐shell nanoparticles and Hb‐CHIT‐BMIM×BF₄ is able to open up new opportunities for the design of enzymatic biosensors.     

A Hafnium Oxide Based Voltammetric Platform for the Sensitive Determination of Octopamine

An electrochemical sensor was constructed by modification of a glassy carbon electrode (GCE) with nanoparticles of hafnium oxide (HfO₂) and multi-walled carbon nanotubes (MWCNTs) for the sensitive determination of octopamine. The platform (HfO₂NPs/MWCNTs/GCE) presented an improved anodic peak for octopamine at 0.65 V. The combination of HfO₂ and MWCNTs resulted in outstanding catalytic activity and enhanced the magnitude of the peak response. Results suggest that a three-electron oxidation occurs for the process of octopamine. Voltammetry of octopamine exhibited a dynamic linear response in the concentration range of 1.6×10⁻⁶∼4.8×10⁻⁵ M with a detection limit of 5.4×10⁻⁷ M for octopamine.     

Preparation of novel magnetic noble metals supramolecular composite for the reduction of organic dyes and nitro aromatics

By considering the exceptional properties of supramolecular, noble metals (NM) and magnetic nanoparticles (NPs), we successfully synthesized a novel magnetic, metals and supramolecular composite. Briefly, the Fe₃O₄@SiO₂ core-shell spheres were first modified with gold (Au) and palladium (Pd) NPs and then with mono-6-thio-β-cyclodextrin (SH-β-CD). The synthesized Fe₃O₄@SiO₂-Au-Pd@SH-β-CD nanocomposite shows a good magnetic response (42.3 emu/g). The nanocomposite showed good performance for the reductive degradation of rhodamine B (RhB) and 4-nitrophenol (4-NP). The calculated rate constant (k) values for the reduction of 4-NP and RhB were 0.062± 0.02 s⁻¹ and 0.027± 0.01 s^−1, respectively. The high catalytical performance was supposed to be due to the host-guest interaction of β-CD and also due to the NM synergic effect. The nanocomposite structural and chemical morphology was investigated by various spectroscopic techniques. Furthermore, the catalyst was recycled six times and it maintains morphology, chemical nature, and high magnetic behavior, as demonstrated by FTIR and TEM analysis of the recycled catalyst. These results demonstrate a very efficient, cost-effective, and recyclable catalyst in the field of catalysis technology development.     

Palladium Nanoparticles Embedded into Graphene Nanosheets: Preparation,Characterization, and Nonenzymatic Electrochemical Detection of H2O2

A novel nonenzymatic H₂O₂ sensor based on a palladium nanoparticles/graphene (Pd‐NPs/GN) hybrid nanostructures composite film modified glassy carbon electrode (GCE) was reported. The composites of graphene (GN) decorated with Pd nanoparticles have been prepared by simultaneously reducing graphite oxide (GO) and K₂PdCl₄ in one pot. The Pd‐NPs were intended to enlarge the interplanar spacing of graphene nanosheets and were well dispersed on the surface or completely embedded into few‐layer GN, which maintain their high surface area and prevent GN from aggregating. XPS analysis indicated that the surface Pd atoms are negatively charged, favoring the reduction process of H₂O₂. Moreover, the Pd‐NPs/GN/GCE could remarkably decrease the overpotential and enhance the electron‐transfer rate due to the good contact between Pd‐NPs and GN sheets, and Pd‐NPs have high catalytical effect for H₂O₂ reduction. Amperometric measurements allow observation of the electrochemical reduction of H₂O₂ at 0.5 V (vs. Ag/AgCl). The H₂O₂ reduction current is linear to its concentration in the range from 1×10^?9 to 2×10^?3 M, and the detection limit was found to be 2×10^?10 M (S/N=3). The as‐prepared nonenzymatic H₂O₂ sensor exhibits excellent repeatability, selectivity and long‐term stability.     

The Electropolymerization of 2,6‐Diaminopyridine and Its Application as Mercury Ion Selective Electrode

A composite graphite (CG) electrode modified with poly(2,6‐diaminopyridine) (PDAP) was used as solid state‐ion selective electrode for determination of mercury. The electrooxidation of monomer 2, 6 diaminopyridine (DAP) onto CG was accomplished from the 30 mM DAP in 5% H₂SO₄ and 0.5 M ZnSO₄. The electrode displayed Nernstian response with slope of 28.4±1 mV decade⁻¹ in concentration range of 1×10⁻⁶ to 1×10⁻¹ M and in solution of pH 3–5. The limit of detection for electrode was 3×10⁻⁸ M with response time of 25 s. The electrode was also suitable as an indicator electrode in the potentiometric titration of Hg²⁺ with iodide.     

Rolling‐Circle Amplification Detection of Thrombin Using Surface‐Enhanced Raman Spectroscopy with Core‐Shell Nanoparticle Probe

An ultrasensitive surface‐enhanced Raman spectroscopy (SERS) sensor based on rolling‐circle amplification (RCA)‐increased “hot‐spot” was developed for the detection of thrombin. The sensor contains a SERS gold nanoparticle@Raman label@SiO₂ core‐shell nanoparticle probe in which the Raman reporter molecules are sandwiched between a gold nanoparticle core and a thin silica shell by a layer‐by‐layer method. Thrombin aptamer sequences were immobilized onto the magnetic beads (MBs) through hybridization with their complementary strand. In the presence of thrombin, the aptamer sequence was released; this allowed the remaining single‐stranded DNA (ssDNA) to act as primer and initiate in situ RCA reaction to produce long ssDNAs. Then, a large number of SERS probes were attached on the long ssDNA templates, causing thousands of SERS probes to be involved in each biomolecular recognition event. This SERS method achieved the detection of thrombin in the range from 1.0×10^?12 to 1.0×10^?8 M and a detection limit of 4.2×10^?13 M , and showed good performance in real serum samples.     

An Ethanol Biosensor Based on Simple Immobilization of Alcohol Dehydrogenase on Fe3O4@Au Nanoparticles

An ethanol biosensor based on alcohol dehydrogenase (ADH) attached to Au seeds decorated on magnetic nanoparticles (Fe₃O₄@Au NPs) is presented. ADH was immobilized on Fe₃O₄@Au NPs, which were subsequently fixed by a magnet on a carbon paste electrode modified with 5 % (m : m) MnO₂. Optimum conditions for the amperometric determination of ethanol with the biosensor were as follows: working potential +0.1 V (vs. Ag/AgCl); supporting electrolyte: 0.1 M phosphate buffer solution at pH 6.8 containing 0.25 mM of the coenzyme (NAD⁺); working electrode: carbon paste with magnetically attached Fe₃O₄@Au NPs (0.012 mg ? cm^?2 electrode area) with immobilized alcohol dehydrogenase (120 units per cm² of electrode area). Linearity between signal and concentration was found for the range from 0.1 to 2.0 M ethanol (r²=0.995) with a detection limit of 0.07 M, a sensitivity of 0.02 µA ? mM^?1 ? cm^?2, a reproducibility of 4.0 % RSD, and a repeatability of 2.7 % RSD. The results for the determination of ethanol in alcoholic beverages showed good agreement with gas chromatography (GC) with recovery of 96.0 – 108.8 %.