Molecular fluorescent probe for Zn based on 2-(2-nitrostyryl)-8-methoxyquinoline

A fluorescent Zn²⁺ sensor based on the 2-(2-nitrostyryl)-8-methoxyquinoline (2-nitroSQ) has been designed, synthesized, and characterized by various spectral techniques. The designed fluorophore displays high selectivity, sensitive fluorescence enhancement (13-fold), and strong binding affinity toward Zn²⁺ among the various biologically significant metal ions examined in ACN-H₂O (9:1, v/v).     

A new Tb-selective fluorescent sensor based on 2-(5-(dimethylamino)naphthalen-1-ylsulfonyl)-N-henylhydrazinecarbothioamide

A novel fluorescent chemosensor 2-(5-(dimethylamino)naphthalen-1-ylsulfonyl)-N-phenylhydrazinecarbothioamide (L) has been synthesized, which revealed an emission of 530 nm and when excited at 360 nm. The fluorescent probe undergoes a fluorescent emission intensity quenching upon binding to terbium ions in MeCN solution. The fluorescence quenching of L is attributed to the 1:1 complex formation between L and Tb(III) which has been utilized as the basis for the selective detection of Tb(III). The linear response range covers a concentration range of Tb(III) from 4.0 × 10⁻⁷ to 1.0 × 10⁻⁵ M and the detection limit is 1.4 × 10⁻⁷ M. The association constant of the 1:1 complex formation for L–Tb⁺³ was calculated to be 6.01 × 10⁶ M⁻¹, and the fluorescent probe exhibits high selectivity over other common metal ions mono-, di-, and trivalent cations indicate good selectivity for Tb(III) ions over a large number of interfering cations.     

A new colorimetric and fluorimetric sensor for metal cations based on poly(propilene amine) dendrimer modified with 1,8-naphthalimide

A new fluorescent first generation poly(propylene amine) dendrimer (PPI), peripherally modified with 4(butylamino-substituted-1,8-naphthalimide), has been synthesized and characterized. Its photophysical characteristics in organic solvents of different polarities were studied, and the influence of sodium hydroxide on its spectral characteristics in N,N-dimethylformamide is discussed. The complexes formed between the dendrimer and metal cations in solution have been studied with regard to the potential applications of the new dendrimer as a colorimetric and fluorescent sensor for metal ions. The fluorescence intensity of the dendrimer in the presence of metal cations (Zn²⁺, Co²⁺, Pb²⁺, Mn²⁺, Cu²⁺ and Fe³⁺) increases substantially revealing its sensor potential.     

Fluorescence chemical sensor based on water‐soluble poly(p‐phenylene ethynylene)–graphene oxide composite for Cu2+

A chemical sensor for metal ions was fabricated based on a water‐soluble conjugated polymer–graphene oxide (GO) composite. Water‐soluble poly(p‐phenylene ethynylene) (PPE) with sulfonic acid side chain groups was used to prepare a very stable water‐soluble PPE–GO composite with strong π–π interactions in water. The relationship between the optical properties and metal ion sensing capability of the PPE–GO composite in aqueous solution was investigated. Addition of metal ions enhanced the fluorescence intensity of the composite, and, in particular, the composite enabled the fluorescence detection of Cu²⁺ in aqueous solutions with high selectivity and sensitivity. Therefore, this conjugated polymer–GO composite sensor system was found to be an effective turn‐on type chemical sensor for metal ions. Copyright © 2015 John Wiley & Sons, Ltd.     

6-(N,N-Dimethylamino)-2-naphthoylacryl Acid: a Highly Selective and Sensitive Fluorescent Sensor of Copper(II)

A novel fluorescent probe, 6-(N,N-dimethylamino)-2-naphthoylacryl acid(ACADAN) was designed and synthesized as a fluorescent sensor for Cu²⁺ in aqueous media. Significant amplification of fluorescence signals without causing any discernible change of maximum fluorescence emission wavelength(λ_max) was observed upon the addition of Cu²⁺. Importantly, ACADAN is capable of recognizing Cu²⁺ selectively in aqueous media in the presence of various biologically relevant metal ions and the prevalent toxic metal ions in the environment with high sensitivity(detection limit was 0.1 μmol/L).     

Sensor Array Based Determination of Edman Degradated Amino Acids Using Poly(p-phenyleneethynylene)s

A cross-reactive optical sensor array based on poly(p-phenyleneethynylene)s (PPEs) determines Edman degraded amino acids. We report a sensor array composed of three anionic PPEs P1–P3 , and their electrostatic complexes with metal ions (Fe²⁺, Cu²⁺, Co²⁺). We recorded distinct fluorescence intensity response patterns as “fingerprints” of this chemical tongue toward standard phenylthiohydantoin (PTH) amino acids—degradation products of the Edman process. These “fingerprints” were converted into canonical scores by linear discrimination analysis (LDA), which differentiates all of the PTH-amino acids. This array discriminates PTH-amino acid residues degraded from an oligopeptide through Edman sequencing. This approach is complementary to chromatography approaches which rely on mass spectrometry; our array offers the advantage of simplicity.     

Transition Metal Ions or Acid-induced Suppression of Photoinduced Proton Transfer and Electron Transfer Reaction in 5-(4-Fluorophenyl)-2-hydroxypyridine: A Molecule of Dual Mode Fluorosensitivity

The photophysical properties of 5-(4-fluorophenyl)-2-hydroxypyridine (FP2HP) at different pH and its fluorescence response toward different transition metal ions have been studied by steady-state absorption and emission spectroscopy in combination with quantum chemical calculations. Although keto-enol tautomerization is observed in the excited state, the molecule is weakly fluorescent due to the presence of electron-rich nitrogen atom and relatively electron-deficient fluorine atom, which may lead to photoinduced electron transfer process. In the presence of the transition metal ions, such as Zn²⁺, Cd²⁺, Hg²⁺, etc., the studied molecule exhibits changes in its absorption and emission properties. The present system shows fluorescence enhancement instead of usual quenching in presence of the transition metal ions, such as Fe²⁺ and Cu²⁺. Spectral observation leads to the interpretation that this structurally simple molecule can be effectively utilized as a chelation-enhanced fluorescence-based chemosensor for the detection of transition metal ions. The experimental findings corroborate well with theoretical calculations at Hartree–Fock level using 6-31G** and lanl2dz basis sets.     

Tb3+ PVC-Membrane Electrode Based on 2-{2-(2-Anilinocarbothioyl)hydrazino)-2-oxoacetyl}-N-phenyl-1-hydrazine Carbothioamide

Abstract

The polyvinyl chloride (PVC) membrane containing 2-{2-(2-anilinocarbothioyl)hydrazino)-2-oxoacetyl}-N-phenyl-1-hydrazinecarbothioamide (AHC) as a suitable iophore exhibits a Nernstian response for Tb³⁺ ions over a wide concentration range (1.0 × 10^?6 to 1.0 × 10^?2 M) with a slope of 19.6 ± 0.3 mV per decade and a limit of detection of 6.8 × 10^?7 M in the pH range 3.5–8.5. The proposed sensor revealed very good selectivities (expect for the Pr³⁺ and Ho³⁺ ions) for a wide variety of other metal ions. The practical utility of the electrodes has been demonstrated by its use for the determination of Tb³⁺ in different solutions.     

CdS/ZnS core-shell quantum dots capped with mercaptoacetic acid as fluorescent probes for Hg(II) ions

We have synthesised water soluble CdS/ZnS core-shell quantum dots (QDs) capped with mercaptoacetic acid (MAA). They were characterised by UV–vis absorption spectroscopy, fluorescence spectroscopy, FT-IR and transmission electron microscopy. Such QDs can be used as fluorescent probes for the determination of metal ions because they quench the fluorescence of the QDs. The QDs exhibit absorption and emission bands at 345?nm and 475?nm respectively, which is more longer wavelength compared to MAA-capped CdS QDs and obviously is the result of the larger particle size. The fluorescence intensity of CdS-based QDs is strongly enhanced by coating them with a shell of ZnS. In addition, such functionalised QDs are more sensitive to Hg(II) ions. Parameters such as pH, temperature and concentration of the QDs have been optimised. A high selectivity and sensitivity toward Hg(II) ions is obtained at pH 7.4 and a concentration of 12.0?mg of QDs per L. Under optimum conditions, the fluorescence intensity of CdS/ZnS QDs is linearly proportional to the concentration of Hg(II) in the range from 2.5 to 280?nM, with a detection limit of 2.2?nM. The effect of potentially interfering cations was examined and confirmed the high selectivity of this material.

Highly selective detection of mercury (II) using a G-rich oligonucleotide-based fluorescence quenching method

We provide a highly sensitive and selective assay to detect Hg²⁺ in aqueous solutions using single fluorescence-labeled G-quadruplex at room temperature. The mechanism is that AS1411 converted to G-quadruplex in the presence of potassium ion, and then, by this technique utilizing the high binding capacity of T–Hg²⁺–T makes the fluorescence dye come closer to GGG of AS1411 to causing fluorescence signal quenching by photoinduced electron transfer energy transfer. At physiological pH, the detection limit can be as low as 10 nM, with high selectivity toward Hg²⁺ ions over a lot of metal ions. The linear correlation existed between the fluorescence intensity and the concentration of Hg²⁺ over the range of 0–250 nM (R = 0.9920) in real sample. Accordingly, we expect this G-quadruplex-based sensor will be a potential application for detection of environmentally toxic mercury.     

A selective fluorescent sensor for Pb(II) in water

A new fluorescent sensor (1) containing bis(2-pyridylmethyl)amine group as a binding moiety for Pb²⁺ was developed. Compound 1 shows selective response to Pb²⁺ over other metal ions in pH 7.0 HEPES buffer solution. The fluorescence intensity enhancement was ascribed to the complex formation between Pb²⁺ and 1 which blocked the photo-induced electron transfer process.     

Iron(III) selective fluorescence probe based on perylene tetracarboxylic diimide

Responses of organic fluorophore, perylenediimide derivative N,N′-di[3-[2-(3-thienyl)ethyl]phenyl]perylene-3,4,9,10-bis-(dicarboxyimide) (PDI1) was investigated in polymer matrix of polyvinyl chloride (PVC) by emission spectrometry. Its response to Fe(III) ions was evaluated in terms of the effect of pH. The properties of time dependent response, reversibility, limit of detection, linear concentration range for the metal ion and repeatability characteristics of the sensing element also have been studied. The offered sensor exhibited remarkable fluorescence intensity quenching at pH 6.0 in the concentration range of 1 × 10^?6 to 2.5 × 10^?3 M Fe(III) ions. The reproducibility of the sensor membrane was investigated by alternately changing the solution between 1 × 10^?4 M Fe(III) in Na₂HPO₄ (4 × 10^?2 M) and NaH₂PO₄ buffer (2 × 10^?3 M).     

Determination of thallium(III) with novel arsenoxylphenylazo rhodanine after pre-concentration and separation

A new catalytic kinetic fluorescent method for determination of trace thallium(III) was investigated. The method was based on the catalytic effect of thallium on oxidation of 3-p-chlorophenyl-5-(2′-arsenoxylphenylazo) rhodanine (4ClRAAP) by hydrogen peroxide in potassium hydrogen phthalate-hydrochloric acid (pH?=?5.2). Under the optimum conditions the great increase of fluorescence intensity had a linear relationship against the concentration of thallium in the range of 0.43 to 10.0?µg?L^?1 with a detection limit of 2.6?×?10^?10?g?L^?1. The coexistent metal ions can be separated, and thallium can be enriched by polyamide, which greatly improved the selectivity and sensitivity of the system. The method was applied to determine trace amount of thallium in wine, water and mineral samples, with satisfactory results.     

Novel 1,8-naphthalimide dye for multichannel sensing of H<Superscript>+</Superscript> and Cu<Superscript>2+</Superscript>

A novel 1,8-naphthalimide dye with simple structure has been produced by a facile synthetic method for colorimetric and fluorescent sensing of H⁺ and Cu²⁺. In CH₃CN/H₂O (1/1, v/v), the dye could monitor H⁺ using dual channels (ratiometric absorbance and fluorescence intensity change) from pH 6.2 to 12.0. Meanwhile, in the pH range of 1.9–5.2, the dye could also be used to detect Cu²⁺ using triple channels [ultraviolet–visible (UV–Vis) absorption, fluorescence intensity reduction, as well as fluorescence blueshift]. The detection limits for Cu²⁺ evaluated by colorimetric and fluorescent titration were 6.10 × 10^?7 and 2.62 × 10^?7 M, respectively. The dye exhibited specific selectivity and sensitivity for H⁺ and Cu²⁺ over various coexisting metal ions. Moreover, the sensing mechanism of the dye for H⁺ and Cu²⁺ was carefully examined.     

A Novel Colorimetric and Fluorescent pH Sensor Derived from Iminocoumarin and Thiophene‐Carboxaldehyde

A novel colorimetric and fluorescent pH sensor derived from iminocoumarin and thiophene‐carboxaldehyde was designed and synthesized. The structures of the dye and related compounds were characterized by IR, ¹H NMR, ¹³C NMR, and mass spectra. Color change from green to yellow of the new sensor solution in ethanol–water with the decrease in the pH value from 7 to 2 was observed by the naked eye. Under acidic conditions, the intensity of the maximum fluorescence emission peak of the sensor increased gradually with the decrease in the acidity of the solution (the increase in the pH value from 2 to 7) and attained to the maximum value at about pH 6. Under basic conditions, the fluorescence intensity of the emission peak of the sensor did not exhibit a distinct change at pH ≤ 11.85, and the fluorescence was quenched at pH 13.36, concomitant with the green color of the solution turning pale. The sensor can be used as a fluorescent pH probe in the presence of common metal cations and anions without interference.     

Photophysical properties of rhodamine isomers: A two-photon excited fluorescent sensor for trivalent chromium cation (Cr)

We introduce a new rhodamine-based fluorescent chemosensor, FD8 which exhibits a distinct two-photon excited fluorescence (TPEF) on/off characteristic upon binding Cr³⁺ ions. By coordination with metal cation, conformation of FD8 changes from spirocyclic to open-ring, resulting in remarkable enhancement of absorption and fluorescence both in one- and two-photon excitations. As a result, a 29-fold enhancement of two-photon excited fluorescent intensity was observed when 10 eq. Cr³⁺ was added to the FD8 solution. The detection limit of Cr³⁺ cation concentration down to 1 μM (0.01 eq. of FD8) was achieved under our experimental condition. Besides the excitation within ultraviolet regime by fluorescence resonance energy transfer (FRET) mechanism, the TPEF on/off behavior further extends the excitation to near infrared regime (the biological optimal window of 700-1200 nm), and shows more effective sensitivity. The broad excitation wavelength, on/off fluorescence and high selectivity to Cr³⁺ enable FD8 to be a powerful Cr³⁺ cation sensor with potential application, especially in biological detection. To the best of our knowledge, this is the first report about two-photon fluorescent sensor for Cr³⁺ ions.     

An efficient and selective flourescent chemical sensor based on 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a new fluoroionophore for determination of iron(III) ions. A novel probe for iron speciation

A novel fluorescent chemical sensor for the highly sensitive and selective determination of Fe³⁺ ions in aqueous solutions is prepared. The iron sensing system was prepared by incorporating 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L) as a neutral Fe³⁺-selective fluoroionophore in the plasticized PVC membrane containing sodium tetraphenylborate as a liphophilic anionic additive. The response of the sensor is based on the strong fluorescence quenching of L by Fe³⁺ ions. At pH 5.5, the proposed sensor displays a calibration curve over a wide concentration range from 6.0 × 10⁻⁴ to 1.0 × 10⁻⁷ M, with a relatively fast response time of less than 2 min. In addition to a high stability and reproducibility, the sensor shows a unique selectivity toward Fe³⁺ ion with respect to common coexisting cations. The proposed fluorescence optode was applied to the determination of iron(III) content of straw of rice, spinach and different water samples. The fluorescent sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

All Solid State Nickel(II)‐Selective Potentiometric Sensor Based on an Upper Rim Substituted Calixarene

A new ionophore, i.e. p‐(2‐thiazolazo)calix[4]arene ( I ) has been explored for its selective behavior towards Ni(II) ions. A poly(vinyl chloride) based membrane containing ( I ) as an electroactive material along with sodiumtetraphenylborate (NaTPB), and nitrophenyloctyl ether in the ratio 10 : 100 : 3 : 150 (I:PVC:NaTPB:NPOE) (w/w) was used to fabricate an all solid state nickel(II)‐selective sensor. The developed sensor exhibited a working concentration range of 1.0×10^?6–1.0×10^?1 M, with a Nernstian slope of 28.9±1.0 mV/decade of activity and a response time of 10–15 s. This sensor shows a detection limit of 9.0×10^?7 M. Its potential response remains unaffected of pH in the range 3.0–7.6, and the cell assembly could be used successfully in partially nonaqueous medium (up to 10 % v/v) without any significant change in the slope value or the working concentration range. The sensor worked satisfactorily for about ten weeks and exhibited excellent selectivity over a number of mono‐, bi‐, and tri‐valent cations including alkali, alkaline earth metal, and transition metal ions. It could be used as an indicator electrode for the end point determination in the potentiometric titration of nickel ions against ethylenediaminetetraacetic acid (EDTA) as well as for the determination of nickel ion concentration in real samples.     

2-(2′-Hydroxyphenyl)-4(3H)-quinazolinone derivatives based fluorescent probes for mercury(II) via an intramolecular proton transfer mechanism

2-(2′,5′-Dihydroxy-phenyl)-4(3H)-quinazolinone (DHPQ), a new fluorescent dye that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesised and used as fluorescent probe for detection of Hg²⁺. Mercuric ions can be detected and quantitated by measuring the fluorescent intensity decrease of the probe. The decrease of fluorescence intensity of DHPQ upon the addition of Hg²⁺ was attributed to the blocking of ESIPT reactions of DHPQ and quenching its fluorescence. The analytical performance characteristics of the proposed Hg²⁺ probe were investigated. The probe can be applied to the quantification of Hg²⁺ with a concentration range covering from 8.0?×?10^?7 to 2.0?×?10^?4?mol?L^?1, with a working pH range of 5.5–6.5. It shows excellent selectivity for Hg²⁺ over other transition metal cations. The proposed method was testified for the Hg²⁺ assay in river water samples with satisfying recoveries.     

Original Potentiometric Ytterbium(III) PVC-Membrane Sensor Based on N1,N2-Bis-[1-(2-hydroxy-1,2-diphenyl)ethylidene]ethanedihydrazide

Abstract

In this work, we describe the construction, performance, and applications of an original ytterbium(III) sensor based on N¹,N²-bis-[1-(2-hydroxy-1,2-diphenyl)ethylidene]ethanedihydrazide (BHDEH), which acts as a suitable carrier. Because it has a low detection limit of 4.2 × 10^?7 M, the sensor response for the Yb(III) ion is Nernstian over a wide concentration range: four decades of concentration (1.0 × 10^?6 to 1.0 × 10^?2 M). The response time of the electrode is less than 10 s, it can be used in the pH range of 3.2–8.3, and its duration is at least 2 months without any considerable potential divergence. The sensor revealed very good selectivity for Yb(III) in the presence of several metal ions. To investigate the sensor analytical applicability, it was tested as an indicator electrode in the potentiometric titration of Yb(III) solution with standard EDTA solution. The proposed electrode was also used to determine fluoride ions in mouthwash.