Preparation of poly(vinyl pivalate) microspheres by dispersion polymerization in an ionic liquid and saponification for the preparation of poly(vinyl alcohol) with high syndiotacticity

We report here a successful free-radical dispersion polymerization of vinyl pivalate (VPi) in an ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][TFSI]) using poly(vinyl pyrrolidone) (PVP) as a stabilizer. Morphological analysis by FE-SEM revealed that poly(vinyl pivalate) (PVPi) obtained from dispersion polymerizations were in the form of spherical particles. Micron-sized, PVPi particles with a number-average molecular weight (M_n) of 166,400 g/mol could be obtained using 5% stabilizer (w/w to monomer) at 65 °C for 20 h. The effects of varying concentration of stabilizer, initiator and monomer upon polymer yield, molecular weight, and morphology of PVPi were also investigated. Analogous polymerizations in dimethyl sulfoxide (DMSO) and bulk served as references. In addition, the preparation of poly(vinyl alcohol) (PVA) by saponification of the resultant PVPi was described.     

The miscibility of poly(vinyl alcohol)/poly(N-vinylpyrrolidone) blends investigated in dilute solutions and solids

Poly(vinyl alcohol) (PVA) (polymer A) and poly(N-vinylpyrrolidone) (PVP) (polymer B) are known to form a thermodynamically miscible pair. In the present study the conclusion on miscibility of PVA/PVP solid blends, confirmed qualitatively (DMTA, FTIR) and quantitatively (DSC, χ_AB = − 0.69 at 503 K) is compared with the miscibility investigations of PVA/PVP solution blends by the technique of dilute solution viscometry. The miscibility of the ternary (polymer A/ polymer B/ solvent) system is estimated on the basis of experimental and ideal values of the viscosity parameters k, b and [η]. It is found that the conclusions on miscibility or nonmiscibility drawn from viscosity measurements in dilute solution blends depend: (i) on the applied extrapolation method used for the determination of the viscosity interaction parameters, (ii) on the assumed definition of the ideal values and (iii) on the thermodynamic quality of the solvent, which in the case of PVA depends on its degree of hydrolysis. Hence, viscometric investigations of dilute PVA/PVP solution blends have revealed that viscometry, widely used in the literature for estimation of polymer-polymer miscibility can not be recommended as a sole method to presume the miscibility of a polymer pair.     

Bicomponent aligned nanofibers of N-carboxyethylchitosan and poly(vinyl alcohol)

Bicomponent nanofibers of N-carboxyethylchitosan (CECh) and poly(vinyl alcohol) (PVA) were obtained by electrospinning of mixed aqueous solutions. The electrospinning of CECh-containing nanofibers was enabled by the ability of PVA to form an elastically deformable entanglement network based on hydrogen bonds. The average diameters of the bicomponent fibers were in the range 100-420 nm. Water-resistant nanofibrous mats were obtained by thermal crosslinking at 100 °C for 10 h. Nanofibrous materials with 1D-, 1D-transversery or 3D fiber alignment were obtained depending on the type of the collector used.     

Synthesis of biocompatible and biodegradable block copolymers of polyvinyl alcohol‐block‐poly(ε‐caprolactone) using metal‐free living cationic polymerization

Applications of metal‐free living cationic polymerization of vinyl ethers using HCl · Et₂O are reported. Product of poly(vinyl ether)s possessing functional end groups such as hydroxyethyl groups with predicted molecular weights was used as a macroinitiator in activated monomer cationic polymerization of ε‐caprolactone (CL) with HCl · Et₂O as a ring‐opening polymerization. This combination method is a metal‐free polymerization using HCl · Et₂O. The formation of poly(isobutyl vinyl ether)‐b‐poly(ε‐caprolactone) (PIBVE‐b‐PCL) and poly(tert‐butyl vinyl ether)‐b‐poly(ε‐caprolactone) (PTBVE‐b‐PCL) from two vinyl ethers and CL was successful. Therefore, we synthesized novel amphiphilic, biocompatible, and biodegradable block copolymers comprised polyvinyl alcohol and PCL, namely PVA‐b‐PCL by transformation of acid hydrolysis of tert‐butoxy moiety of PTBVE in PTBVE‐b‐PCL. The synthesized copolymers showed well‐defined structure and narrow molecular weight distribution. The structure of resulting block copolymers was confirmed by ¹H NMR, size exclusion chromatography, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5169–5179, 2009     

Diffusivity enhancement of water vapor in poly(vinyl alcohol)–fumed silica nano-composite membranes: Correlation with polymer crystallinity and free-volume properties

The diffusion coefficients of water vapor in poly(vinyl alcohol)–fumed silica (PVA–FS) nano-composite membranes were determined using the gravimetric method. Water vapor was observed to diffuse more rapidly in membranes with increased FS content. The vapor diffusion coefficient was determined as 1.2 × 10⁻¹³ m²/s in pure PVA and was observed to increase to 3.0 × 10⁻¹³ m²/s in PVA composites containing 30% FS nano-particles. The free-volumes of PVA–FS membranes were characterized using positron annihilation lifetime (PAL) spectroscopy. PAL results showed that both the ortho-positronium (o-Ps) lifetime and intensity increased with the addition of FS. The intensity (I₃) was found to be higher than the estimated value determined from the linear combination of the data from pristine PVA and FS, and correlated excellently with the polymer amorphous content. The PAL results indicate that a higher FS content in PVA increases the free-volume hole size (a volume increase from 40 to 55 Å³) and free-volume hole density (an I₃ increase from 23 to 28%), resulting in a higher fractional free-volume in the nano-composites. The increase in the relative polymer free-volume with higher FS content was associated with a decrease in the PVA crystallinity, as determined from differential scanning calorimetry measurements. It is postulated that the incorporated FS nano-particles interrupt polymeric chain packing and retard crystallization during membrane formation. More crystalline segments were transformed into amorphous regimes in the nano-composites containing more FS. A correlation between water diffusivity and the fractional free-volume was obtained, and the water diffusivity was successfully expressed by the free-volume theory.     

Dechlorination of poly(vinyl chloride) using NaOH in ethylene glycol under atmospheric pressure

A solution of NaOH dissolved in ethylene glycol (EG) was effective in the dechlorination of poly(vinyl chloride) (PVC) at atmospheric pressure. The degree of dechlorination increased with increasing temperature, reaching a maximum of 97.8% at 190 °C. The dechlorination proceeded under chemical control and exhibited first-order kinetics with an apparent activation energy of 170 kJ mol⁻¹. The apparent rate constant for dechlorination in 1.0 M NaOH/EG was approximately 150 times greater than that in 1.0 M NaOH/H₂O. In addition, dechlorination was faster at atmospheric pressure in NaOH/EG than under high pressure in NaOH/H₂O. The dechlorination reaction occurs via a combination of E2 and S_N2 mechanisms.     

Preparation and properties of poly(alkyl vinyl ether-2-ethyl-2-oxazoline) diblock copolymers

A method for the synthesis of well-defined poly(alkyl vinyl ether–2-ethyl-2-oxazoline) diblock copolymers with hydrolytically stable block linkages has been developed. Monofunctional poly(alkyl vinyl ether) oligomers with nearly Poisson molecular weight distributions were prepared via a living cationic polymerization method using chloroethyl vinyl ether together with HI/ZnI₂ as the initiating system and lithium borohydride as the termination reagent. Using the resultant chloroethyl ether functional oligomers in combination with sodium iodide as macroinitiators, 2-ethyl-2-oxazoline was polymerized in chlorobenzene/NMP to afford diblock copolymers. A series of poly(methyl vinyl ether–2-ethyl-2-oxazoline) diblock materials were found to have polydispersities of ≈ 1.3–1.4 and are microphase separated as indicated by two T_g's in their DSC thermograms. These copolymers are presently being used as model materials to study fundamental parameters important for steric stabilization of dispersions in polar media. © 1993 John Wiley & Sons, Inc.     

Immobilization of Acidithiobacillus ferrooxidans with complex of PVA and sodium alginate

A new Acidithiobacillus ferrooxidans cell immobilization technique utilizing the complex of PVA solution and sodium alginate solution crosslinked by Ca(NO₃)₂ as entrapment medium is reported. The mixture of A. ferrooxidans suspension and the entrapment complex were extruded into a solution of Ca(NO₃)₂ (1-5%) to form beads, then the beads were frozen at −20 °C for 1-2 days and thawed at room temperature. The forming mechanism, characteristic of this immobilized beads and the factors affecting activity of immobilized cells were also discussed. A maximum oxidation rate of 4.6 g Fe²⁺/(L h) was achieved in batch cultures by these immobilized cells. Precipitation formed during culture process was analyzed. The forming mechanism of this precipitation and how this precipitation affects the whole system were also discussed. In addition, the immobilization technique is operated simply, and the gel beads have high stability even under non-sterile conditions. So its application on an industrial scale would be more practicable.     

Enzyme inhibition-based biosensor for the electrochemical detection of microcystins in natural blooms of cyanobacteria

An electrochemical biosensor for the detection of microcystin has been developed based on the inhibition of the protein phosphatase 2A (PP2A) by this cyanobacterial toxin. The enzyme has been immobilised by entrapment using a poly(vinyl alcohol) azide-unit pendant water-soluble photopolymer (PVA-AWP). Electrode supports and immobilisation conditions have been optimised by colorimetric assays, the highest immobilisation yields being obtained with screen-printed graphite electrodes and the 1:2 PP2A:PVA ratio. Catechyl monophosphate (CMP), α-naphthyl phosphate (α-NP) and 4-methylumbelliferyl phosphate (4-MUP) have been used as phosphorylated substrates to monitor the protein phosphatase activity by electrochemical methods, the former providing the highest chronoamperometric currents at appropriate working potentials (+450 mV versus Ag/AgCl). Incubation with standard microcystin solutions has demonstrated the inhibition of the immobilised enzyme, proportional to the toxin concentration. The standard inhibition curve has provided a 50% inhibition coefficient (IC₅₀) of 83 μg L⁻¹, a limit of detection (LOD; 35% inhibition) of 37 μg L⁻¹, and 100% inhibition at about 1000 μg L⁻¹. Real samples of cyanobacterial blooms from the Tarn River (Midi-Pyrénées, France) have been analysed using the developed amperometric biosensor and the toxin contents have been compared to those obtained by a conventional colorimetric protein phosphatase inhibition (PPI) assay and high-performance liquid chromatography (HPLC). The results clearly justify the use of the developed amperometric biosensor as screening method for microcystin detection.     

Kinetic study of the thermal decomposition of poly(vinyl alcohol)/kraft lignin derivative blends

A kraft lignin derivative (KLD) obtained by reaction with p-aminobenzoic acid/phthalic anhydride, was blended with poly(vinyl alcohol) (PVA) by solution casting from DMSO. PVA and PVA/KLD films were exposed to ultraviolet radiation (Hg lamp, 96 h) and analyzed by thermogravimetry (TG) in inert and oxidative atmosphere. Typical multi-step decomposition profiles were obtained. The apparent activation energy (E_a) of the thermal degradation of the samples was computed by the Vyazovkin method. The KLD degradation presented only small intervals of decomposition degree with constant E_a values. PVA and blends showed intervals of up to 50% in decomposition degree with nearly constant E_a, and smaller intervals in which E_a varies drastically. The influences of samples irradiation and of surrounding gas in TG analysis on E_a are also shown.     

Synthesis and structural characterization of a dichloro zinc complex of N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane: Application to ring opening polymerization of rac-lactide

A novel dichloro zinc complex (L¹)ZnCl₂, where L¹ is N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane, has been synthesized and characterized. The dimethyl derivatives, generated in situ from the well characterized dichloro zinc complexes (L¹)ZnCl₂ and (L²)ZnCl₂, where L² is N,N′-bis-(benzyl)-(R,R)-1,2-diaminocyclohexane, were employed as initiators for the ring opening polymerization (ROP) of rac-lactide (rac-LA). The complexes were found to be highly efficient initiators yielding the polylactide (PLA) with a narrow molecular weight distribution. The catalytic activity and heterotactic selectivity of the Zn(II) complexes were affected by the substituents on the phenyl groups of benzyl moieties in (R,R)-1,2-diaminocyclohexane. The dimethyl derivative of (L²)ZnCl₂ produced highly stereocontrolled PLA with P_r = 0.75 at −25 °C.     

The structure of N-meso-(6,8,8,14,16,16-hexamethyl-1,5,9,13-tetraazacyclohexadeca-5,13-diene)nickel(II) chloro(isothiocyanato)zincate(II)

A yellow compound which was crystallised from a solution of (6,8,8,14,16,16-hexamethyl-1,5,9,13-tetraazacyclohexadeca-5,13-diene)bis(isothiocyanato)nickel(II) in aqueous zinc(II) chloride has cations with singlet ground state nickel(II) in square-planar coordination by the nitrogen atoms of the macrocycle. The asymmetric unit has two similar cations. The N₄ group of one cation is near coplanar (r.m.s. displacements ±0.009(1) Å, with Ni displaced by 0.048(1) Å from this plane) while the other cation has significant tetrahedral twisting of the N₄ group (r.m.s. displacements of N atoms ±0.126(2) Å, with Ni displaced by 0.027(2) Å from this plane). The mean Ni–N distances are Ni–N_amine = 1.950(6) and Ni–N_imine = 1.897(6) Å. Both cations have N-meso configurations with saddle conformations, with the substituted chelate rings in boat conformations tilted to one side of the NiN₄ ‘plane’ and the unsubstituted chelate rings tilted to the other side, one in a boat conformation and the other with the central methylene group disordered, the components forming boat {s.o.f. 0.70(1) and 0.74(1) for the two cations} and chair conformation chelate rings. The counter-ions have tetrahedrally coordinated zinc(II) ions, one as [ZnCl₂(NCS)₂]²⁻ ions and the other with one ligand site with disordered Cl⁻ {s.o.f. 0.78(1)} and NCS⁻ ligands, i.e. with disordered [ZnCl₂(NCS)₂]²⁻ and [ZnCl(NCS)₃]²⁻ ions, with an overall composition of [Ni(trans-Me₆[16]diene)][ZnCl_1.9(NCS)_2.1].     

Thermal diffusivity measurement of low-k dielectric thin film by temperature wave analysis

Thermal diffusivity of thin film with low dielectric constant (k), what is called low-k dielectric thin film, 0.31-1.14 μm, including hydrogen-silsesquioxane (HSQ), methyl-silsesquioxane (MSQ), and poly(arylen ether) was examined by temperature wave analysis. The phase shift of temperature wave was observable up to 100 kHz. Thermal diffusivity of HSQ was 4.7 × 10⁻⁷ m² s⁻¹, on the other hand it was not higher than 1.1 × 10⁻⁷ m² s⁻¹ for MSQ or poly(arylen ether) at room temperature. Temperature dependence of thermal diffusivity/thermal conductivity of MSQ was obtained, thermal diffusivity decreased but thermal conductivity increased in a heating scan at 30-150 °C. It was shown that the thermal diffusivity of low-k thin film was correlated with the chemical and the physical structures, the latter was formed in the spin-coating and the curing process.     

Novel thermally stable and chiral poly(amide-imide)s bearing from N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid: Synthesis and characterization

Novel optically active aromatic poly(amide-imide)s (PAIs) were prepared from newly synthesized N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid (3) via polycondensation with various diamines. The diacid was synthesized by the condensation reaction of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (1) with l-isoleucine (2) in a mixture of acetic acid and pyridine (3:2 v/v). All the polymers were obtained in quantitative yields with inherent viscosities of 0.20-0.43 dL g⁻¹. All the polymers were highly organosoluble in solvents like N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), tetrahydrofuran, γ-butyrolactone, cyclohexanone and chloroform at room temperature or upon heating. These poly(amide-imide)s had glass transition temperatures between 198 and 231 °C, and their 10% weight-loss temperatures were ranging from 368 to 398 °C and 353 to 375 °C under nitrogen and air, respectively. The polyimide films had tensile strengths in the range of 63-88 MPa and tensile moduli in the range of 0.8-1.4 GPa. These poly(amide-imide)s possessed chiral properties and the specific rotations were in the range of −3.10° to −72.92°.     

Anti-trade-off in dehydration of ethanol by novel PVA/APTEOS hybrid membranes

Novel organic–inorganic hybrid membranes were prepared through sol–gel reaction of poly(vinyl alcohol) (PVA) with γ-aminopropyl-triethoxysilane (APTEOS) for pervaporation (PV) separation of ethanol/water mixtures. The membranes were characterized by FTIR, EDX, WXRD and PALS. The amorphous region of the hybrid membranes increased with increasing APTEOS content, and both the free volume and the hydrophilicity of the hybrid membranes increased when APTEOS content was less than 5 wt%. The swelling degree of the hybrid membranes has been restrained in an aqueous solution owing to the formation of hydrogen and covalent bonds in the membrane matrix. Permeation flux increased remarkably with APTEOS content increasing, and water permselectivity increased at the same time, the trade-off between the permeation flux and water permselectivity of the hybrid membranes was broken. The sorption selectivity increased with increasing temperature, and decreased with increasing water content. In addition, the diffusion selectivity and diffusion coefficient of the permeants through the hybrid membranes were investigated. The hybrid membrane containing 5 wt% APTEOS has highest separation factor of 536.7 at 50 °C and permeation flux of 0.0355 kg m⁻² h⁻¹ in PV separation of 5 wt% water in the feed.     

Aluminum(III) selective potentiometric sensor based on morin in poly(vinyl chloride) matrix

Al³⁺ selective sensor has been fabricated from poly(vinyl chloride) (PVC) matrix membranes containing neutral carrier morin as ionophore. Best performance was exhibited by the membrane having composition as morin:PVC:sodium tetraphenyl borate:tri-n-butylphosphate in the ratio 5:150:5:150 (w/w, mg). This membrane worked well over a wide activity range of 5.0 × 10⁻⁷ to 1.0 × 10⁻¹ M of Al³⁺ with a Nernstian slope of 19.7 ± 0.1 mV/decade of Al³⁺ activity and a limit of detection 3.2 × 10⁻⁷ M. The response time of the sensor is ∼5 s and membrane could be used over a period of 2 months with good reproducibility. The proposed sensor works well over a pH range (3.5-5.0) and demonstrates good discriminating power over a number of mono-, di- and trivalent cations. The sensor can also be used in partially non-aqueous media having up to 20% (v/v) methanol, ethanol or acetone content with no significant change in the value of slope or working activity range. The sensor has also been used in the potentiometric titration of Al³⁺ with EDTA and for its determination in zinc plating mud and red mud.     

New fluorinated polymers bearing pendant phosphonic groups for fuel cell membranes: Part 1 synthesis and characterizations of the fluorinated polymeric backbone

Radical copolymerizations of chlorotrifluoroethylene (CTFE) with vinyl ethers such as 2-chloroethyl vinyl ether (CEVE) and ethyl vinyl ether (EVE) were performed at 75 °C in the presence of peroxide initiator. Three copolymers were obtained and characterized by means of both NMR and elemental analysis. Then, the chlorine atoms in the side chains were converted into iodine atoms by nucleophilic substitution, which was monitored by ¹H NMR spectroscopy. A series of five copolymers with different amounts of iodine atoms in the side chains were thus obtained. These copolymers exhibited molecular weight values of about 25,000 g mol⁻¹, and the thermal analysis of the copolymers showed a starting degradation from about 220 °C. The T_g values were in the range of 34-41 °C and showed a linear dependence versus the content of iodine atoms.     

Improvement of an enzyme electrode by poly(vinyl alcohol) coating for amperometric measurement of phenol

A poly(vinyl alcohol) film cross-linked with glutaraldehyde (PVA-GA) was introduced to the surface of a tyrosinase-based carbon paste electrode. The coated PVA-GA film was beneficial in terms of increasing the stability and reproducibility of the enzyme electrode. The electrode showed a sensitive current response to the reduction of the o-quinone, which was the oxidation product of phenol, by the tyrosinase, in the presence of oxygen. The effects of the PVA and PVA-GA coating, the pH, and the GA:PVA ratio on the current response were investigated. The sensitivity of the PVA-GA-Tyr electrode was 130.56 μA/mM (1.8 μA/μM cm²) and the linear range of phenol was 0.5-100 μM. At a higher concentration of phenol (>100 μM), the current response showed the Michaelis-Menten behavior. Using the PVA-GA-Tyr electrode, a two-electrode system was tested as a prototype sensor for portable applications.     

Comparative study of Ag(I) selective poly(vinyl chloride) membrane sensors based on newly developed Schiff-base lariat ethers derived from 4,13-diaza-18-crown-6

The six Schiff-base lariat ether chelates based on 4,13-diaza-18-crown ether, have been synthesized and explored as a neutral ionophores for preparing poly(vinyl chloride) based membrane sensors selective to silver(I). The addition of potassium tetrakis(4-chlorophenyl) borate and various plasticizers, viz., o-NPOE, DBP, DBBP, DOP and CN has been found to substantially improve the performance of the sensors. The best performance was obtained with the sensor no. 5 having membrane of chelate (A₆) with composition (w/w) chelate (2.8%):PVC (45.7%):o-NPOE (48.6%):KTpClPB (2.8%). This sensor exhibits Nernstian response with slope 59.3 mV/decade of activity in the concentration range 5.6 × 10⁻⁸-1.0 × 10⁻¹ M Ag(I), performs satisfactorily over wide pH range of (3.0-8.0) with a fast response time (12 s). The sensor was also found to work satisfactorily in partially non-aqueous media up to 25% (v/v) content of acetonitrile, methanol or ethanol and can tolerate the concentration 1.0 × 10⁻² M of ionic (SDS, TBC) and nonionic (Triton X-100) surfactants. The proposed sensor can be used over a period of 4 months without significant drift in potentials. The response of the sensor was highly selective to Ag⁺ over a large number of cations and it could therefore be used for Ag⁺ estimation in blood of occupationally exposed persons.     

Composite membranes prepared from glutaraldehyde cross-linked sulfonated cardo polyetherketone and its blends for the dehydration of acetic acid by pervaporation

Cardo polyetherketone (PEK-C) composite membranes were prepared by casting glutaraldehyde (GA) cross-linked sulfonated cardo polyetherketone (SPEK-C) or silicotungstic acid (STA) filled SPEK-C and poly(vinyl alcohol) (PVA) blending onto a PEK-C substrate. The compatibility between the active layer and PEK-C substrate is improved by immersing the PEK-C substrate in a GA cross-linked sodium alginate (NaAlg) solution and using water–dimethyl sulfoxide (DMSO) as a co-solvent for preparing the STA-PVA-SPEK-C/GA active layer. The pervaporation (PV) dehydration of acetic acid shows that permeation flux decreased and separation factor increased with increasing GA content in the homogeneous membranes. The permeation flux achieved a minimum and the separation factor a maximum when the GA content increased to a certain amount. Thereafter the permeation flux increased and the separation factor decreased with further increasing the GA content. The PV performance of the composite membranes is superior to that of the homogeneous membranes when the feed water content is below 25 wt%. The permeation activation energy of the composite membranes is lower than that of the homogeneous membranes in the PV dehydration of 10 wt% water in acetic acid. The STA-PVA-SPEK-C-GA/PEK-C composite membrane using water–DMSO as co-solvent has an excellent separation performance with a flux of 592 g m⁻² h⁻¹ and a separation factor of 91.2 at a feed water content of 10 wt% at 50 °C.