A photoionization study of the van der Waals molecule C2H4 · HCl

The dissociation energy of the C₂H₄ · HCl van der Waals complex was determined to be 3.18±0.73 kcal mol^?1 by a dissociative photoionization technique. C₂H₄ · HCl was produced by free expansion of a 1:4 mixture of C₂H₄ in HCl and the clusters were ionized with tunable synchrotron radiation. The photoionization efficiency function of (C₂H₄ · HCl)⁺ from C₂H₄ · HCl was determined between 600 and 1,300 Å and the onset for (C₂H₄ · HCl)⁺ was established as 1,163±2 Å = 10.66±0.02 eV; these values give ΔH _f ⁰ (C₂H₄ · HCl) = ?10.7±0.7 kcal mol^?1 and ΔH _f ⁰ (C₂H₄·HCl⁺)=235.1±0.9 kcal mol^?1. A complex ion dissociation energyD ₀(C₂H₄ · HCl⁺) = ?0.3±0.9 kcal mol^?1 was calculated from the results. The major features on the PIE curve for C₂H₄ · HCl⁺ can be analyzed in terms of the known energetic features of C₂H ₄ ⁺ and HCl. An extended energy diagram for the C₂H₄ + HCl system is presented.     

The role of octanol in the extraction of hydrochloric acid by trilaurylamine dissolved in benzene

The extraction of hydrochloric acid by trilaurylamine (TLA) dissolved in benzene was studied in the presence and in absence of n-octanol. The extraction of HCl was found to be enhanced by the addition of octanoi to the organic phase. In order to explain this effect by means of the law of mass action, the systems TLA-HCL-benzene and n-octanol-HCl-benzene as well as TLA-octanol-benzene were also studied. It was found that TLA reacts with octanol to form a complex, TLAROH, while the octanol itself associates in benzene to form dimers and tetramers, although it does not extract HCl alone from the dilute solutions used in the present study. The enhancement of the extraction of HCl by TLA upon the addition of n-octanol could be described by the formation of the species TLA·ROH·HCl and its stability constant was determined.     

Penning ionization electron spectrometry of hydrogen chloride

An electron spectrometric study has been performed on HCl using metastable helium and neon atoms as well as neon resonance photons. High resolution electron spectra were obtained with two different beam apparatuses for a mixed He(2¹ S, 2³ S) beam, a pure He(2³ S) beam, and, for the first time, state-selected pure Ne(3s ³ P ₂) and pure Ne(3s ³ P ₀) beams, and for NeI resonance photons. For the system He(2³ S)+HCl the vibrational populationsP(υ′) of the formed HCl⁺ (X ²∏ _i , υ′) and HCl⁺ (A ²Ω⁺, υ′) ions are found to differ from the Franck-Condon factors for unperturbed potentials, indicating slight bond stretching in HCl upon He(2³ S) approach. For He(2¹ S)+HCl the vibrational peak shapes and vibrational populations are substantially different from the He(2³ S) case, pointing to an additional, charge exchanged interaction (He⁺+HCl^?) in the entrance channel of the former system. For the first time, we have detected the electrons in both the He(2¹ S)+HCl and He(2³ S)+HCl spectra associated with the major mechanism for the formation of Cl⁺ ions: energy transfer to repulsive HCl** Rydberg states, dissociating toH(1s) and autoionizing Cl**(¹ D ₂ nl) atoms. For both Ne(³ P ₂)+HCl and Ne(³ P ₀)+HCl, the populationsP(υ′) of both final molecular states HCl⁺ (X, A) agree closely with the Franck-Condon factors at the average relative collision energyē _coll=55 meV and, for HCl⁺ (A ²Ω⁺), also atē _coll=130 meV.     

Separation of tin from some metals by extraction chromatography

Much attention has been devoted to Sn (IV) strongly retained on the TBP-Daiflon column from 2M HCl in extraction chromatography. The separations of Sn?Cu, Zn, As, Cd, Sb, Pb,¹¹³Sn-¹²⁵Sb,¹¹³Sn-^113mIn (^113mIn milking) and Sn?Hg?Fe were successfully achieved without any contamination. In the separations, except for the last, only tin was retained separately on the column upon passing the mixed solution. The daughter indium was eluted with 0.5M HCl. In the last separation, iron was eluted with 0.5 M HCl, tin with 0.1M HCl and mercury with 2M HNO₃, for these metals retained on the column. Radioactive tracers for tin, iron, mercury and antimony were used.     

Effect of Cl substituent in the aromatic tetracycline ring on its reactivity with solvated electrons

Decomposition yields of tetracycline hydrochloride /TC.HCl/ and chlorotetracycline hydrochloride /ClTC?HCl/ in methanol solution saturated with Ar or N₂O were determined. Rate constants of the reaction e_s with some antibiotics were obtained: $$\begin{gathered} k/e_s^ - + ClTC \cdot HCl/ = 2 \cdot 49 \times 10^8 dm^3 \cdot mole^{ - 1} \cdot s^{ - 1} ; \hfill \\ k/e_s^ - + TC \cdot HCl/ = 2 \cdot 86 \times 10^8 dm^3 \cdot mole^{ - 1} \cdot s^{ - 1} \cdot \hfill \\ \end{gathered} $$ On the basis of the diffence between decomposition yields: ΔG=G_?TC.HCl^?G?ClTC.HCl′ 7-C?Cl group decomposition yield and the rate constant $$k/e_s^ - + Cl - C - 7/ = 7 \cdot 94 \times 10^8 dm^3 \cdot mole^{ - 1} \cdot s^{ - 1} $$ were determined. It was demonstrated by¹H NMR that the radical formed by degradation of 7-C?Cl group is recombined with the H atoms leading to ClTC.HCl being converted into tetracycline hydrochloride /TC.HCl/.     

On the determination of HCl+ (A,v′) vibrational populations from HCl+ (A→X) fluorescence spectra: direct comparison between photoionization and penning ionization

Using a beam apparatus, we have measured the HCl⁺ (A,v′→X,v″) fluorescence spectra of HCl⁺ (A,v′) ions formed in HeI (58.4 nm), and NeI (73.6 nm) photoionization and, for the first time, in He (2³ S) Penning ionization under single collision conditions with a wavelength bandwidth around 1 nm. In addition, we have studied Ne (3s ³ P _{2, 0}) Penning ionization of HCl at three different collision energies. The procedure and the problems in extracting HCl⁺ (A,v′) vibrational populations from the data are discussed in some detail. Thedirect comparison of photoionization and Penning ionization data allows definitive conclusions to be drawn on the question whether final state interactions in the Penning reaction change the “nascent” vibrational population (determined by electron spectrometry); for He (2³ S)+HCl, such changes are shown to be absent within the experimental uncertainty (<±10%). For Ne (3s ³ P _{2, 0})+HCl, the HCl⁺ (A,v′=0, 1) populations are also found to be close to those measured by electron spectrometry and essentially independent of collision energy in the range 34–96 meV. From measurements of the fluorescence intensity as a function of HCl density, we have evidence for a fast loss of HCl⁺ (A,v′) ions in collisions with HCl (rate constant around 5·10^?9 cm³s^?1).     

Kinetics and possible mechanism of hydrogen chloride oxidation over supported copper-containing salt catalysts: II. Kinetics of HCl oxidation in the deacon and methane oxychlorination reactions over the CuCl2-KCl-LaCl3 catalyst

The kinetics of HCl oxidation at 350–425°C over the supported CuCl₂-KCl-LaCl₃ catalyst has been investigated using a gradientless technique. The HCl oxidation kinetics in the Deacon and methane oxychlorination reactions has been studied in order to substantially extend the \(Cl_2 \left( {P_{Cl_2 } } \right)\) partial pressure variation range. When the reaction rate is independent of P _HCl, HCl oxidation on the copper-potassium catalysts is described by the same rate equation, irrespective of whether the catalyst contains lanthanum or not. The introduction of lanthanum chloride increases the HCl oxidation rate by one order of magnitude. The rate equation obtained has significant advantages over the equation corresponding to the Kenney-Slama equation. The kinetic features of HCl oxidation over the lanthanum-containing catalyst, whether the process depends on P _HCl or not, can be explained in terms of the superposition of the Kenney-Slama dissociative mechanism and the catalytic mechanism suggested here. The role of lanthanum chloride in both HCl oxidation pathways is considered.     

Preparation and evaluation of PANI/PTT electromagnetic shielding fabric by in-situ chemical polymerization

To prepare the flexible and stretchable electromagnetic shielding (EMS) fabric with environmental stability, this paper uses polytrimethylene terephthalate (PTT) fabric as substrate, the aniline monomer as raw material, hydrochloric acid (HCl) as the doping agent, ammonium persulfate (APS) as the oxidant to produce polyaniline (PANI)/PTT electromagnetic shielding fabric by in-situ chemical polymerization. It studies the influence of APS and HCl concentration on the surface electrical resistance and the absorption loss of electromagnetic shielding fabric. It can be observed that an increasing APS and HCl facilitate the absorption and spread of PANI into PTT fabric to form a conductive network, and improve the absorption loss efficiency, while the excess APS and HCl will hinder the PANI polymerization. The high electrical conductivity and absorption loss of the PANI/PTT fabric are obtained at the concentration of An 0.4 M, APS 0.4 M, HCl 1.25 M, and polymerization reaction time 120 min. Meanwhile, in-situ polymerization of PANI does not introduce new impurities and destroy the molecular structure of PTT.     

Separation of metal halide pairs using Amberlite LA-2 and tri-N-butyl phosphate

A systematic study was performed on the extraction and separation of cadmium from iron halides in pure halo-acid solutions and their mixtures with H₂SO₄ and H₃PO₄. As solvents Amberlite LA-2, TBP, nitrobenzene and HDEHP were used. Recommended separation media for the amine are 2M HCl, 1M HBr, 1.12M HCl?2M H₂SO₄, 0.64M HBr?2M H₂SO₄, 1.12M HCl?4M H₃PO₄ 0.64M HBr?7M H₃PO₄ and for TBP the medium 0.64M HBr?4M H₃PO₄ is the only suitable condition.     

Electron attachment to HCl clusters

Negatively charged cluster ions of hydrogen chloride are formed by electron attachment to HCl clusters, which are produced in a seeded supersonic beam traversing a sustained gas discharge. Cluster ions of (HCl) _n ^? , withn=2, and tentatively withn=3 and 4 are observed. Cluster ions like Cl _n ^? , Cl _n ^? (HCl) _m , and withAr attached to them are also seen. The relevance to radiation chemistry of HCl if briefly discussed. Atoms evaporating from the hot, thoriated tungsten filament of the glow discharge lead to clusters such as Th _n ^? and its oxides.     

Influence of HCl on the stability of liquid lamellae between two colliding bubbles in aqueous solutions ofn-fatty acids

The effect of HCl on life time of liquid lamellae created between two colliding bubbles in aqueous solutions ofn-fatty acids were studied. The results show, that the addition of HCl has a pronounced influence on life time of the lamellae. At low fatty acid concentration the lifetime of the lamellae in the acidified solution is higher than in the nonacidified solution, but at higher fatty acid concentration the effect reverses. The analysis of these experimental results show that the characteristic influence of HCl on lamellae lifetime can be explained by the formation of distinct association states of the fatty acids in the liquid phase at different concentration ranges. The results are discussed with respect to bubble coalescence in gas-liquid contactors.     

Kinetics and possible mechanism of hydrogen chloride oxidation over supported copper-containing salt catalysts: I. Kinetics of HCl oxidation in the deacon and methane oxychlorination reactions over a copper-potassium salt catalyst

The kinetics of HCl oxidation at 350–425°C over a (CuCl₂-KCl)/support catalyst in two complementary processes—Deacon and methane oxychlorination reactions—has been investigated using a gradientless technique. This has allowed the range of \(P_{Cl_2 }\) in the reaction mixture to be markedly extended. New kinetic features of HCl oxidation under conditions such that this process does and does not depend on P _HCl have been discovered. The kinetic equations obtained in this study fit experimental data in a wider range of conditions than the equations proposed earlier. The results of this study suggest the existence of two HCl oxidation pathways in the Deacon reaction.     

Solvent extraction of hafnium(IV) by TBP and topo from acidic organic-aqueous solutions

Tracer concentrations of Hf(IV) were extracted by 60% TBP solution in benzene from 5M HClO₄, 5M HCl, 6M HNO₃ and 8M H₂SO₄ solutions, and by 1·10^?4 M TOPO solution in benzene from 2M HClO₄ and 2M HCl solutions in the presence of a variety of organic solvents miscible with the aqueous phase. Whereas for TBP these solvents caused an increase of HF(IV) extraction, an opposite effect was observed for TOPO. The results were discussed from the point of view of various solute-solvent and solvent-solvent interactions.     

Aminophylline: thermal characterization and its inhibitory properties for the carbon steel corrosion in acidic environment

Aminophylline (AMF) was studied as corrosion inhibitor for carbon steel in 1.0 mol L^?1 HCl solution using electrochemical measurements associated with UV–Vis spectrophotometry and optical microscopy. Simultaneous thermogravimetry/derivative thermogravimetry and differential scanning calorimetry analysis was performed in order to determine the temperature range in which AMF is an effective inhibitor, without the decomposition risk that could change the inhibition mechanism. Thermal behaviour restricts AMF application as corrosion inhibitor for carbon steel in 1.0 mol L^?1 HCl solution at temperatures ≤45 °C where there are no significant modifications of the adsorption mechanism. According to the results of electrochemical measurements, in association with UV–Vis spectrophotometry and optical microscopy techniques, AMF is a mixed-type inhibitor for carbon steel corrosion in 1.0 mol L^?1 HCl solution, simultaneously suppressing the anodic and cathodic processes and acting via spontaneous physisorption on the metal surfaces.     

Tracer scale solvent extraction separation of tantalum from niobium using di-(2-ethylhexyl)-phosphoric acid as extractant

A simple solvent extraction procedure for the efficient separation of the radioactive tracers⁹⁵Nb and¹⁸²Ta from each other in a mixture using di-(2-ethylhexyl)phosphoric acid (HDEHP) as extractant is described. Tantalum was found to be quantitatively extracted from an aqueous madium, which is 1.6N in HCl and 10^?2 M in oxalic acid, with a HDEHP solution of 0.1 M concentration. Extractabilities of both niobium and tantalum in mineral acids like HCl, H₂SO₄ and HNO₃ and in some organic acids like oxalic, citric, etc., in HDEHP under the experimental conditions were also studied. The reliability of the separation procedure was verified further by γ-ray spectrometry.     

Method of radioisotope isolation from cyclotron targets

The extraction of titanium and rhenium by oxygen-containing solvents (alcohols, ketones) has been investigated. The investigations on the titanium extraction have been carried out from hydrochloric acid solutions, on the rhenium extraction from alkaline solutions. The adsorption of cobalt and zinc on a strongly basic anion exchanger has been determined from the MCl₂?HCl?LiCl (M=Ni, Cu) and GaCl₃?HCl solutions. On the basis of the results obtained methods for the isolation of radioactive isotopes⁴⁴Ti,^56,58Co,^65,69mZn, and^183,184Re from irradiated mixtures have been elaborated. Technical characteristics of the isolated cyclotron-produced isotopes are presented.     

Chemical separation of molybdenum from uranium and fission product nuclides

A very rapid method for the separation of molybdenum(VI) from neutron irradiated uranium and its fission products is described. The procedure is based on the selective extraction of molybdenum(VI) by a 0.1M solution of 2-hexylpyridine in benzene from 4M HCl+0.04M KSCN. Decontamination factors were estimated to be >10⁴ for the radionuclides of niobium, zirconium, ruthenium, lanthanum, cerium, promethium, yttrium, strontium and barium.     

Impact of PS/SiO2 morphologies on the SERS activity of PS/SiO2/Ag nanocomposite particles

To understand the relationship between the morphology of carboxyl-functionalized polystyrene/silica (PS/SiO₂) nanocomposite microspheres and the surface-enhanced Raman scattering (SERS) performance of PS/SiO₂/Ag nanocomposite particles, core-shell and raspberry-like PS/SiO₂ composite microspheres were used as templates to prepare PS/SiO₂/Ag nanocomposite particles. The core-shell and raspberry-like structured PS/SiO₂ templates were prepared via in situ sol-gel reaction by hydrolysis tetraethyl orthosilicate (TEOS) in alkali solution. Silver nanoparticles (10–50 nm) were loaded on the PS/SiO₂ templates’ surface by chemical reduction. The morphology and structure of the PS/SiO₂/Ag particles were characterized by TEM, SEM, X-ray diffraction (XRD), and ultraviolet-visible (UV-vis) spectroscopy. Rhodamine 6G (R6G) was selected as a model chemical to study the enhancement performance of substrate constructed by PS/SiO₂/Ag nanocomposite. Results indicated that the PS/SiO₂/Ag nanocomposite prepared based on the core-shell templates showed higher SERS activity. The beneficial effect was associated with a lower specific area of core-shell structure and the larger average diameter of nanosilvers than that of the raspberry-like templates.     

Activity coefficient of hydrochloric acid in aqueous solutions of sodium chloride

Electromotive-force measurements of the cell $$Pt;H_2 \left( {g,1{\text{ }}atm} \right)|HCl\left( {{\text{m}}_A } \right),NaCl\left( {{\text{m}}_B } \right)|AgCl;Ag$$ have been made at temperatures between 5 and 45°C at values ofm _A+m _B of 0.1, 0.3809, 0.6729, and 0.8720 mole-kg^?1. The activity coefficients of HCl in HCl/NaCl mixtures and the Harned coefficients α₁₂ have been obtained. The change of α₁₂ with total molality is consistent with the existence of binary interactions between H⁺ and Na⁺ ions. The linear variation of the relative partial molal heat content with the fraction of NaCl in the mixture suggests that an analog of the Harned rule exists for this thermodynamic quantity.     

Facile formation of stimuli-responsive,fluorescent and magnetic nanoparticles based on cellulose stearoyl ester via nanoprecipitation

In comparison to stimuli-responsive, multi-functional nanoparticles (NPs) from synthetic polymers, such NPs based on sustainable, naturally occurring polysaccharides are still scarce. In the present study, stable stimuli-responsive, fluorescent and magnetic NPs were fabricated using cellulose stearoyl esters (CSEs) consisting of cellulose and stearoyl groups. The multifunctional NPs with the average diameters between 80 and 250 nm were obtained after facile nanoprecipitation using CSE solutions containing Fe₃O₄-NPs. Using the aqueous solution of fluorescent rhodamine B as precipitant, NPs with rhodamine B on NP surface were obtained. Rhodamine B could be released depending on the temperature. In comparison, stearoylaminoethyl rhodamine B can be encapsulated in CSE-NPs, which renders obtained NPs reversible fluorescence in response to UV illumination and heat treatment.