7α-alkylation, 7,7-bisalkylation,and reduction of the 20-oxo group of poststerone in reactions with alkyl halides in lithium–ammonia solution

Reactions of poststerone with methyl iodide, allyl bromide, and propargyl bromide in lithium–ammonia solution resulted in its completely stereoselective 7α-alkylation accompanied by reduction of the 20-oxo group with formation of equimolar amounts of 20R- and 20S-hydroxy derivatives. The reaction of poststerone with excess allyl bromide afforded 7,7-bis-allyl 20R- and 20S-alcohols at a ratio of 3: 1. The reduction of the 20-oxo group in the alkylation of poststerone with excess propargyl bromide led to the formation of an equimolar mixture of Δ⁸⁽¹⁴⁾- and Δ⁸⁽⁹⁾-isomers with exclusive S configuration of C²⁰.     

A facile one-pot synthesis of α-fluoro-α,β-unsaturated esters from alkoxycarbonylmethyltriphenylphosphonium bromides

A convenient one-pot synthesis of α-fluoro-α,β-unsaturated esters from ethoxy- and tert-butoxycarbonylmethyltriphenylphosphonium bromide was developed. The fluorinated phosphoranes, generated in situ from alkoxycarbonylmethyltriphenylphosphonium bromides and 1-chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor^®), undergo a Wittig reaction with aldehydes to yield α-fluoro-α,β-unsaturated esters with (Z)-selectivity.     

立体选择性合成2-(a-噻吩甲酰基)-3-取代苯基-4-乙氧羰基-5-甲基-反式-2,3-二氢呋喃

溴化(a-噻吩甲酰基)甲基三苯鉮1与3-取代苯甲叉基-2,4-戊二酮 2以碳酸钾为碱,在苯中55℃条件下反应,可以较好的收率、高立体选择性地生成反-2-(a-噻吩甲酰基)-3-取代苯基-4-乙氧羰基-5-甲基-2,3-二氢呋喃3。产物结构均经波谱予以确定。本文还提出了生成产物的可能机理。     

A Facile One‐pot Synthesis of α‐Halo,α‐allylic Aldehydes from α,α‐Dihalo Ketones Utilizing Allylic Zinc Bromide

An efficient synthesis of various α‐halo,α‐allylic aldehydes from α,α‐dihalo ketones using both cyclic (3‐bromocyclohex‐1‐ene zinc bromide and (Z)‐3‐bromocyclobut‐1‐ene zinc bromide) and acyclic (allylzinc bromide and cinnamylzinc bromide) type of allylic organozinc bromide with DMF as base is described. A possible reaction mechanism is also proposed.     

Synthesis of 1′,3′-Dioxolan-2′-one by the Reaction of Steroidal Oxiranes with Carbon Dioxide: Synthesis of Five-Membered Cis Cyclic Carbonates

The reaction of 3β-acetoxy-5,6α-epoxy-5α-cholestane 1, its 3β-chloro analogue 2, and 5,6α-epoxy-5α-cholestane 3 with carbon dioxide gas in the presence of sodium bromide as catalyst with continuous stirring at 100 °C for 30 min affords selectively the corresponding 1′,3′,-dioxolan-2′-ones (steroidal cyclic cis-carbonates) 4–6 in excellent yields. The structures of these products have been established on the basis of their elemental analysis and spectral data (infrared, ¹H NMR, and mass).     

Total Synthesis of β-Bulnesene and 1-Epi-β-bulnesene by Intramolecular Photoaddition

dl-β-Bulnesene (1) and dl-1-epi-α-bulnesene (15) have been synthesized starting from the bromide 4 (Schemes 2 and 3). In the key step 9→10 the bonds of the final product were formed by an intramolecular photoaddition. The synthesis was completed by the fragmentation 12→14 and the Wittig reaction 14→15+1 .     

Synthesis of O-(2-Acetamido-2-Deoxy-β-D-Glucopyranosyl)-(l→2)-O-α-D-Mannopyranosyl-(l→6)-O-β-D-Glucopyranosyl-(1→4)-2-Acetamido-2-Deoxy-D-Glucopyranose. A Potential Acceptor-Substrate for N-Acetylglucosaminyltransferase-V (GnT-V)

Abstract

The reaction of phenyl 3,4,6-tri-O-acetyl-2-deoxy-2-phthaIimido-l-thio-β-D-glucopyranoside with methyl 3,4,6-tri-O-benzyl-α-D-mannopyranoside catalysed by iodonium ion (TfOH-NIS) followed by deacylation-acetylarion afforded disaccharide 11. which was readily converted (in four steps) to bromide 12. A similar glycosylarion with phenyl 2,3,4,6-tetra-O-acetyl-l-thio-D-glucopyranoside of benzyl 2-acetamido-3,6-di-O-benzyl-2-deoxy-α-D-glucopyranoside 16 followed by O-deacetylation of the resulting intermediate gave disaccharide 18. The 4,6-O-benzylidene derivative of 18 was acetylated then deacetaled to give diol 21. This diol acceptor was condensed with bromide 12 (promoted by mercuric cyanide) to give the partially protected tetrasaccharide derivative 22 which was O-deacetylated and then subjected to catalytic hydrogenation to furnish the title tetrasaccharide 6. The structure assigned to 6 was supported by ¹H and ¹³C NMR spectral data and FAB mass spectroscopy.     

The synthetic potential of α,α-diallylcyrene

The reaction of cyrene with allyl bromide in THF in the presence of Bu^tOK gave the α,α-diallyl derivative of cyrene in 50% yield. This derivative smoothly undergoes iodo- cyclization on the keto group that is converted into a ketal center to give annulated bis-tetrahydrofuran; intramolecular cationic cyclization in the presence of SnCl₄ or TiCl₄ results in 2-oxabicyclo[3.3.1]nonan-9-ones. The prospects of using these reactions towards the synthesis of trichothecene sesquiterpenoids modified in the central moiety were assessed.     

Photochemical reactions. 137th communication. Preparation and photolysis of (E/Z)-7-methyl-β-ionone

The title compounds (E/Z)- 7 were prepared in 66% overall yield by reaction of β-ionone ((E)-( 1 ) with lithium dimethylcuprate, trapping of the intermediate enolate with benzeneselenenyl bromide and oxidation with H₂O₂. Analogously, (E/Z)-7-methyl-α-inone ((E/Z)- 12 ) was obtained in 65% yield from α-ionone ((E)- 11 ). ¹n, π^*- Excitation (λ > 347 nm, pentane) of (E)-7 causes rapid (E/Z)-isomerization and subsequent reaction of (Z)- 7 to 15 (66%). The formation of 15 is explained by twisting of the dienone chromophore due to repulsive interaction of the 7-CH₃-group with the CH₃-groups of the cyclohexene ring. On the other hand, irradiation λ > 347 nm, Et₂O) of (E)- 7 in the presence of acid leads to (Z)- 7 (5%) and to the novel compound 16 (88%).     

Synthetic Antigens: Synthesis of 4-Aminophenyl O-α-D-Mannopyranosyl-(1→2)-O-α-D-mannopyranosyl-(1→6)-O-α-D-Mannopyranoside and A Related Di- and A Trisaccharide

Abstract

4-Nitrophenyl 2,3-O-isopropylidine-α-D-mannopyranoside 2 was condensed with O-(2,3,4,6-tetra-O-acetyl-α-D-mannopyranosyl)-(1→2)-3,4,6-tri-O-acetyl-α-D-mannopyranosyl bromide 1 and 2,3,4,6-tetra-O-acetyl-α-D-mannopyranosyl bromide 11 in the presence of mercuric cyanide. Products were deprotected to yield, respectively, 4-nitrophenyl O-α-D-mannopyranosyl-(1→2)-O-α-D-mannopyranosyl-(1→6)-α-D-mannopyranoside 6 and 4-nitrophenyl O-α-D-mannopyranosyl-(1→6)-α-D-mannopyranoside 14. The 4-nitrophenyl group of 6 was reduced to give title trisaccharide. Bromide 1 was also condensed with methyl 2,3,4-tri-O-benzyl-α-D-manopyranoside 3 in the presence of silver trifluoromethanesulfonate and tetramethylurea to give protected trisaccharide derivative which was deprotected to furnish, methyl O-α-D-mannopyranosyl-(1→2)-O-α-D-mannopyranosyl-(1→6)-α-D-mannopyranoside 10. The identities of all protected and deprotected compounds were supported by ¹H and ¹³C NMR spectral data.     

Coupling of benzyl halides mediated through alkali metal supramolecular complexes. A novel route to poly(p-xylylene)

Coupling of benzyl bromide giving 1,2-diphenylethane was demonstrated to proceed at room temperature in THF solution mediated by the potassium/18-crown-6 supramolecular complex. Based on this model reaction a novel method for the low temperature synthesis of poly(p-xylylene) from α,α′-dibromo-p-xylene is proposed. Experimental evidence of the polymer structure was provided by solid-state ¹³C NMR and IR spectroscopy.     

Practical synthesis of 16α-bromo-17α-hydroxysteroids via a Raney Ni-catalyzed bromide exchange reaction

D-ring modified glucocorticoids are attractive synthetic targets owing to their broad application in medicinal chemistry. Herein, we reported a practical synthesis of 16α-bromo-17α-hydroxysteroids from easily available 16β-bromo isomers via a Raney Ni-catalyzed bromide exchange reaction. The catalytic Finkelstein-type reaction features high yield, mild reaction condition, short reaction time and simple operation. The method provided an efficient approach to prepare 17α-hydroxy-15-pregnen-20-ones.     

The isomeric compounds nimbolide and isonimbolide

Nimbolide [systematic name: (4α,5α,6α,7α,15β,17α)‐7,15:21,23‐diepoxy‐6‐hydroxy‐4,8‐dimethyl‐1‐oxo‐18,24‐dinor‐11,12‐secochola‐2,13,20,22‐tetraene‐4,11‐dicarboxylic acid γ‐lactone methyl ester], C₂₇H₃₀O₇, was isolated from the leaves of Azadirachta indica, and its isomer, isonimbolide [systematic name: (4α,5α,6α,7α,15α)‐7,15:21,23‐diepoxy‐6‐hydroxy‐4,8‐dimethyl‐1‐oxo‐18,24‐dinor‐11,12‐secochola‐2,16,20,22‐tetra­ene‐4,11‐dicarboxylic acid γ‐lactone methyl ester], was prepared from a novel rearrangement reaction of nimbolide, using boron trifluoride etherate and tetra­butyl­ammonium bromide. The reaction conditions are probably responsible for the ether cleavage, double‐bond rearrangement and reformation of the ether linkage. As a result, there are conformational changes in two cyclo­pentane rings and the side‐chain –CH₂COOMe group. In isonimbolide, an (24) hydrogen‐bond motif is observed.     

Enzymatic immunoassay of α-fetoprotein,insulin and 17-α-hydroxyprogesterone base on chemiluminescence in a flow-injection system

Highly-sensitive enzymatic immunoassay procedures based on a chemiluminescent reaction are described. Glucose oxidase was used as the labelling enzyme conjugated with anti-α-fetoprotein IgG, insulin or 17-α-hydroxyprogesterone. Free and bound fractions present after the immune reaction were separated by an immobilized antibody or a second antibody. The enzyme activity was measured by the chemiluminescence produced by luminol and hydrogen peroxide, catalyzed by potassium hexacyanoferrate(III) after incubation with glucose. The chemiluminescence was measured in a flow-injection system, with a home-made luminescence detector equipped with a spiral flow cell. The detection limits for each substance were 10^?15–10^?17 mol. Recoveries of added α-fetoprotein from diluted serum were quantitative.     

Ion-isotopic exchange reaction kinetics using organic base anion exchange resins Indion-102 and Indion GS-400

The present study deals with the kinetic study of iodide and bromide ion-isotopic exchange reactions in organic based anion exchange resins Indion-102 (nuclear grade) and Indion GS-400 (non-nuclear grade) using radiotracer isotopes. The resins in iodide and bromide form were equilibrated respectively with iodide and bromide ion solutions which were previously spiked with ¹³¹I and ⁸²Br radiotracer isotopes. For both bromide and iodide ion-isotopic exchange reactions, it was observed that the values of specific reaction rate increase with increase in ion concentration from 0.001 to 0.004 M at a constant temperature of 40.0°C. However, at constant ion concentration of 0.003 M, the specific reaction rate was observed to decrease with rise in temperature from 30.0 to 45.0°C. Also it was observed that for iodide ion-isotopic exchange reaction by using Indion-102 resin, the values of specific reaction rate, amount of iodide ion exchanged, initial rate of iodide ion exchange and logK _d were 0.258 min^?1, 0.492 mmol, 0.127 mmol/min and 19.2, respectively, which were higher than 0.208 min^?1, 0.416 mmol, 0.087 mmol/min and 17.6, respectively, obtained by using Indion GS-400 resin under identical experimental conditions of 40.0°C, 1.000 g of ion exchange resin and 0.003M labeled iodide ion solution. The same trend was observed for the two resins during bromide ion-isotopic exchange reaction. The overall results indicate that, under identical experimental conditions, Indion-102 resin shows higher performance than Indion GS-400 resin.     

Kinetic Analysis of Nonisothermal Decomposition of Acetyl Ferrocene

The work deals with thermal decomposition of acetyl ferrocene in nitrogen atmosphere based on nonisothermal thermogravimetry. It presents a mathematical analysis of nonisothermal thermogravimetric data using multiheating rates to estimate reaction kinetic parameters. Model free (integral isoconversional) methods are employed to analyze the thermogravimetric data. The decomposition is a multistep process. The activation energy E_α of decomposition is conversion (α) dependent. The average values of activation energy are E_α = 49.87, 106.28, and 183.35 kJ mol⁻¹ for three major steps of decomposition. The most probable reaction mechanism function, g(α), for thermal reactions has been identified by the master plot method, and the stepwise reaction mechanisms are found to be different for different steps. The estimated values of the activation energy E_α and g(α) have been utilized in the determination of the reaction rate A_α of thermal decomposition. The α‐dependent reaction rate values are determined and are found to lie in the range of 5.2 × 10⁵ to 3.2 × 10⁴ min⁻¹, 1.7 × 10¹⁵ to 7.8 × 10⁶ min⁻¹, and 3.8 × 10⁸ to 1.4 × 10⁷ min⁻¹ for three different steps. Based on the values of E_α, g(α), and A_α, the thermodynamic triplets (ΔS, ΔH, ΔG) associated with the decomposition reactions have been estimated. Estimated kinetic parameters have been used to construct the conversion curves, and those have been successfully compared with the experimentally observed ones.     

Synthesis of 2-S-dioxo isosteres of purine and pyrimidine nucleosides. I. Alkyl and glycosyl derivatives of 3,5-diamino-4H-1,2,6-thiadiazine 1,1-dioxide

Preparation of alkyl and glycosyl derivatives of 3,5-diamino-4H-1,2,6-thiadiazine 1,1-dioxide (1) is described. Reaction of 1 with dimethyl sulfate gave the 4-methyl and 2,4-dimethyl derivatives. With benzyl chloride and allyl bromide C-4 substituted compounds were obtained. Reaction of the disilyl derivative of 1 with either 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosyl bromide or 1,2,3,4,6-penta-O-acetyl-β-D-glucopyranose in the presence of Friedel-Crafts catalysts afforded the α and β anomers of the N-2 nucleoside and the β-O-glucoside. When the reaction was performed with 1-O-acetyl-2,3,5-tri-O-benzoyl-β-D-ribofuranose, a β-C-glycoside and the α and β anomers of the N-2 nucleoside were obtained. The structure of the corresponding nucleosides were elucidated by ¹H nmr and uv by comparing the latter with those of the alkyl derivatives.     

Autooxidation of Δ17(20)-20-hydroxy derivatives of steroids. Synthesis of 3β-acetoxy-17α-hydroperoxy-16α-methylpregn-5-en-20-one and its reduction to 17α-hydroxy derivative

An efficient procedure was proposed for the synthesis of 3β-acetoxy-17α-hydroperoxy-16α-methylpregn-5-en-20-one. Optimal conditions were found for the combined process including 1,4-addition of methylmagnesium bromide at the Δ¹⁶-20-oxo fragment of dehydropregnenolone acetate and autooxidation of resulting bromomagnesium 3β-acetoxy-16α-methylpregna-5,17(20)-dien-20-olate. The subsequent reduction of the 17α-hydroperoxy group and hydrolysis of the 3β-acetoxy group afforded 17α-hydroxy-16α-methyl-substituted dehydropregnenolone acetate and its 3-hydroxy analog in high yield.     

5,10:8,9-Disecosteroids (= Steroklastanes): A new type of modified steroids

Thermolysis of steroidal 5α, 8α- peroxides of type 3a-d generates as major products the corresponding diseco compounds containing a 14-membered ring instead of the standard A-B-C-ring skeleton. Depending on the reaction conditions, either the primary products of type 9 or the α, β-unsaturated ketones of type 4 , formed by subsequent elimination of AcOH, are isolated. The latter, configurationally uniform compounds undergo epoxidation of the C(9)=C(10) bond followed by a Baeyer-Villiger oxidation to give, as final products, the 15-membered cyclic epoxyenol lactones of type 20 and 21 . The structures of the various products were determined by ¹H- and ¹³C-NMR spectroscopy. The conformations of the 14- and 15-membered rings were established by X-ray structure analyses of 7 and 21a . A reaction mechanism for the above transformations is discussed.     

Kinetic study of the iodate—iodide and chlorate—iodide reactions in acidic solutions,and a method for the microdetermination of bromide

The iodate—iodide and chlorate—iodide reactions were studied spectrophotometrically in acidic solutions by stopped-flow techniques. Intermediate products(I⁺)were followed; reaction rate constants and activation energies of the reactions were determined. A method of determining bromide was developed on the basis of its accelerating effect on the iodate—iodide reaction ; microamounts of bromide in the range 16–320 μg (10^-4–2 × 10^-3M) were determined with relative errors and relative standard deviation of about 2%.bl]