AC impedance studies on proton-conducting PAN : NH4SCN polymer electrolytes

Solid polymer electrolytes based on polyacrylonitrile (PAN) doped with ammonium thiocyanate (NH₄SCN) in different molar ratios of polymer and salt have been prepared by solution-casting method using DMF as solvent. The increase in amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. A shift in glass transition temperature (T _g) of the PAN?:?NH₄SCN electrolytes has been observed from the DSC thermograms which indicates the interaction between the polymer and the salt. From the AC impedance spectroscopic analysis, the ionic conductivity has been found to increase with increasing salt concentration up to 30 mol% of NH₄SCN beyond which the conductivity decreases and the highest ambient temperature conductivity has been found to be 5.79?×?10^?3 S cm^?1. The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship which shows hopping of ions in the polymer matrix. The dielectric loss curves for the sample 70 mol% PAN?:?30 mol% NH₄SCN reveal the low-frequency β-relaxation peak pronounced at high temperature, and it may be caused by side group dipoles. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conductivity species are predominantly ions.     

Electrical properties of plasticized chitosan-lithium imide with oleic acid-based polymer electrolytes for lithium rechargeable batteries

Solid polymer electrolytes (SPEs) were prepared and their electrochemical characteristics were characterized. The composition of SPEs containing chitosan, lithium trifluoromethane sulfonimide (LiN(CF₃SO₂)₂) and oleic acid (OA) was optimized employing ac impedance measurements at various temperatures. The electrical conductivity of the SPEs with OA shows the highest value and the presence of OA does not change the structure of the polymer. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Synthesis of PAN/SnCl2 composite as Li-ion battery anode material

A novel process was proposed to synthesize the pyrolytic polyacrylonitrile (PAN)/SnCl₂ composite anode material for Li-ion batteries. The preparation started with the dissolution of PAN and SnCl₂ in dimethylformamide (DMF), followed by drying of the solution and pyrolysis of the dried mixture of PAN and SnCl₂ at 300 °C, leading to homogenous dispersal of SnCl₂ in pyrolytic PAN, which becomes conducting polymer matrix. The composite presented stable cycling capacity of about 490 mAh/g. It is demonstrated that SnCl₂, which has been considered to be an inactive electrode material, can become active by the proposed composite technique. This paves the promising way to prepare electrode materials for Li-ion batteries.     

New polymer electrolyte based on (PVA–PAN) blend for Li-ion battery applications

A polymer blend electrolyte based on polyvinyl alcohol (PVA) and polyacrylonitrile (PAN) was prepared by a simple solvent casting technique in different compositions. The ionic conductivity of polymer blend electrolytes was investigated by varying the PAN content in the PVA matrix. The ionic conductivity of polymer blend electrolyte increased with the increase of PAN content. The effect of lithium salt concentrations was also studied for the polymer blend electrolyte of high ionic conductivity system. A maximum ionic conductivity of 3.76×10⁻³ S/cm was obtained in 3 M LiClO₄ electrolyte solution. The effect of ionic conductivity of polymer blend electrolyte was measured by varying the temperature ranging from 298 to 353 K. Linear sweep voltammetry and DC polarization studies were carried out to find out the stability and lithium transference number of the polymer blend electrolyte. Finally, a prototype cell was assembled with graphite as anode, LiMn₂O₄ as cathode, and polymer blend electrolyte as the electrolyte as well as separator, which showed good compatibility and electrochemical stability up to 4.7 V.     

Proton-conducting polymer electrolyte based on PVA-PAN blend doped with ammonium thiocyanate

Blending of polymers is one of the most useful methods for modulating the conductivity of solid polymer electrolytes. Blend polymer electrolytes have been prepared with polyvinyl alcohol (PVA)-polyacrylonitrile (PAN) blend doped with ammonium thiocyanate with different concentrations by solution casting technique, using dimethyl formamide (DMF) as the solvent. The prepared electrolytes are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), ultraviolet (UV), and ac impedance measurement techniques. The increase in amorphous nature of the blend polymer electrolyte by the addition of salt is confirmed by XRD analysis. The complex formation between the polymers and the salt has been confirmed by FTIR analysis. The thermal behavior has been examined using DSC and TGA. The maximum conductivity has been found to be 2.4?×?10^?3 S cm^?1 for 92.5PVA/7.5PAN/25 % NH₄SCN sample at room temperature. The temperature dependence of conductivity has been studied with the help of Arrhenius plot, and the activation energies are calculated. The proton conductivity is confirmed by dc polarization measurement technique. ¹H NMR studies reveal the presence of protons in the sample. A proton battery is constructed with the highest conducting sample, and its open circuit voltage is measured to be 1.2 V     

Novel electrospun PAN�CPVC composite fibrous membranes as polymer electrolytes for polymer lithium-ion batteries

Composite fibrous membranes based on poly(acrylonitrile)(PAN)-poly(vinyl chloride)(PVC) have been prepared by electrospinning. The fibrous membranes are made up of fibers of 850- to 1,300-nm diameters. These fibers are stacked in layers to produce a fully interconnected pore structure. Polymer electrolytes were prepared by immersing the fibrous membranes in 1 M LiClO₄-PC solution for 60 min. The condition of pure PAN polymer electrolytes is jelly, which has poor mechanical performance and cannot be used. But when PVC with a good mechanical stiffener was added to PAN, the condition of composite PAN?CPVC polymer electrolytes becomes free-standing. In addition, the optimum electrochemical properties have been observed for the polymer electrolyte based on PAN?CPVC (8:2, w/w) to show ionic conductivity of 1.05?×?10^?3 S cm^?1 at 25 °C, anodic stability up to 4.9 V versus Li/Li⁺, and a good compatibility with lithium metal resulting in low interfacial resistance. The promising results showed that fibrous PEs based on PAN?CPVC (8:2, w/w) have good mechanical stability and electrochemical properties. This shows a great potential application in polymer lithium-ion batteries.     

Electrical and optical properties of pure and Pb2+ ion doped PVA???PEG polymer composite electrolyte films

Pb²⁺ ion conducting polymer composite electrolyte films, based on polyvinyl alcohol and polyethylene glycol doped with Pb(NO₃)₂ salt, were prepared using the solution cast technique. X-ray diffraction patterns of polymer composite with salt reveal the decrease in the degree of crystallinity with increasing concentration of the salt. The dielectric plots show an increase in dielectric permittivity at low frequency side with increasing salt concentration as well as temperature. The frequency dependence of ac conductivity obeys the Jonscher power law, and the maximum dc conductivity value is found to be 2.264×10^?7 S/m at 303?K for the polymer composite with 30?mol% Pb(NO₃)₂. The activation energy for the ion in polymer electrolyte has been calculated from the modulus plots, and is in good agreement with the activation energy calculated from the temperature-dependent dc conductivity plot. The modulus plots indicate the non-Debye nature of the sample. For pure and doped films at room temperature, the impedance plots exhibit only one semicircle, indicating the presence of one type of conduction mechanism, whereas for 30?mol% salt doped with electrolyte film at different temperatures, it demonstrated the existence of bulk and electrode?Celectrolyte interface properties. Optical absorption spectra show a broad peak for all complexes, while compared with pure polymer composite, due to the complex formation of polymer electrolyte with Pb(NO₃)₂ and their absorption edge, direct band gap and indirect band gap were calculated. It was found that the absorption edge and energy gap values decreased on doping with Pb(NO₃)₂ dopant.     

Vibrational,electrical, and structural properties of PVDF–LiBOB solid polymer electrolyte with high electrochemical potential window

Polyvinylidene difluoride (PVDF)–lithium bis(oxalato)borate (LiBOB) solid polymer electrolytes (SPEs) have been prepared by solution casting. The highest ionic conductivity achieved is 3.4610^?3 S cm^?1. Electrochemical potential window of the SPEs is found around 4.7 V. Interaction between PVDF and LiBOB is studied systematically. The changes of C–C, CF₂, and CH₂ vibration modes with an emerging shoulder are analyzed. At higher salt content, this shoulder becomes more prominent peak at the expense of CF₂ vibration mode. This suggests the possible Li⁺?F coordination. Deconvolution of IR spectra region from 1750 to 1850 cm^?1 has been carried out to estimate the relative percentage of free ions and contact ions. The finding is in good agreement with conductivity and XRD results. When more salt is present, the number of free ions percentage increases and the Full width at half-maximum (FWHM) of (110) plane is broadening. The Li⁺?F interaction breaks the folding patterns of polymer chain and enhances amorphousness domain.     

Synthesis and characterization of proton-conducting polymer electrolyte based on polyacrylonitrile (PAN)

Solid polymer electrolytes based on polyacrylonitrile (PAN) doped with ammonium iodide (NH₄I) have been prepared by solution casting method with different molar ratios of polymer and salt using DMF as solvent. The XRD pattern confirms the dissociation of salt. The FTIR analysis confirms the complex formation between the polymer and the salt. A shift in glass transition temperature (T _g ) of the PAN/NH₄I electrolytes has been observed from the DSC thermograms, which indicates the interaction between the polymer and the salt. The conductivity analysis shows that the polymer electrolyte with 20 mol% NH₄I has the highest conductivity equal to 1.106 × 10⁻³ S cm⁻¹ at room temperature. The activation energy (E _a ) has been found to be low for the highest conductivity sample. The dielectric permittivity (ε*) and modulus (M*) have been calculated from the alternating current (AC) impedance spectroscopy in the frequency range 42 Hz–1 MHz. The DC polarization measurement shows that the conductivity is mainly due to ions.

     

Solid polymer electrolytes in a poly(butadiene-acrylonitrile)–LiBr system

Poly(nitriles) are among the polymer matrices providing high salt solubility and, in some cases, superionic lithium conductivity at ambient temperatures observed in highly concentrated solvent-free polymer electrolytes. However, the properties of these electrolytes in which ionic aggregation prevails remain difficult to reproduce and predict, as current theories do not adequately model their attributes. The development of new concepts for ion transport in highly concentrated solid polymer electrolytes (SPEs) requires a better understanding of the fundamentals of structure formation in a polymer–salt system over a wide concentration range including salt precipitation. In an attempt to approach this goal, a series of fundamental studies was carried out on the systems based on a rubbery random copolymer of butadiene and acrylonitrile (abbreviated as PBAN). In the present work, LiBr with monatomic halide anion was used as a lithium salt. The effect of LiBr concentration (0.05 to 3.35 mol kg^?1) on phase composition, ion–molecular interactions, glass transition temperature, and ionic conductivity was studied by optical microscopy, FTIR, X-ray diffraction, DSC, and impedance measurements. The results were compared with those of PBAN–LiClO₄ and PBAN–LiAsF₆ studied previously. Low salt solubility and separation of a metastable cubic CsCl-type polymorph of LiBr were established. The highest conductivity of ～10^?4 S cm^?1 at >50 °C was observed for heterogeneous samples comprising this phase. While the conductivity of PBAN–LiBr was lower than that of PBAN–LiClO₄ and PBAN–LiAsF₆, this study provides a new insight into the nature of polymer electrolyte systems.     

An investigation on PAN-PVC-LiTFSI based polymer electrolytes system

Polymer-salt complex with poly(vinyl chloride) (PVC) and poly(acrylonitrile) (PAN) as host polymers blended with lithium bis-(trifluoro methanesulfonyl)imide, LiTFSI [LiN(CF₃SO₂)₂] as dopant salt were prepared in the form of thin film. Fourier transform infrared (FTIR) studies show the evidence of the complexation between PVC, PAN and LiTFSI. Ionic conductivity studies reveal that polymer electrolyte with 30 wt.% LiTFSI has the highest ionic conductivity of 4.39 × 10^− 4 S/cm at room temperature. The polymer electrolytes are also found to be stable up to 315 °C before they decompose. Thermal stability of the polymer electrolytes was also found to increase with increase in salt content. This was proven through thermogravimetric studies.     

Elevated performances of SnS anodes with MWNTs as conductive agent for rechargeable lithium-ion batteries

SnS nanoparticles were mechanochemically synthesized and fabricated into electrodes with two kinds of conductive agents, acetylene black and multi-wall carbon nanotubes (MWNTs), respectively. The morphology and structure of as-synthesized SnS powder were characterized by scanning electron microscopy and X-ray diffraction. The electrochemical properties of as-prepared electrodes were investigated by discharge–charge test, cyclic voltammogram, and electrochemical impedance spectrum. By comparing the variation of the charge-transfer impedance R _ct at different discharge states, it was found that the value of R _ct of the electrode with MWNTs as conductive agent was less than that of the electrode with acetylene black as conductive agent. The electrode with MWNTs as conductive agent had preferable cycling performances, which was believed to be attributed to the tenacity and good conductivity of MWNTs.     

Structural,electrical conductivity,and transport analysis of PAN–NH<Subscript>4</Subscript>Cl polymer electrolyte system

Poly (acrylonitrile) (PAN) and ammonium chloride (NH₄Cl)-based proton conducting polymer electrolytes with different compositions have been prepared by solution casting technique. The amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The FTIR analysis confirms the complex formation of the host polymer (PAN) with the salt (NH₄Cl). DSC measurements show a decrease in T_g with the increase in salt concentration. The conductivity analysis shows that the 25 mol% ammonium chloride doped polymer electrolyte has a maximum ionic conductivity, and it has been found to be 6.4 × 10^?3 Scm^?1, at room temperature. The temperature dependence of conductivity of the polymer electrolyte complexes appears to obey the Arrhenius nature. The activation energy (E_a = 0.23 eV) has been found to be low for 25 mol% salt doped polymer electrolyte. The dielectric behavior has been analyzed using dielectric permittivity (ε*), and the relaxation frequency (τ) has been calculated from the loss tangent spectra (tan δ). Using this maximum ionic conducting polymer electrolyte, the primary proton conducting battery with configuration Zn + ZnSO₄·7H₂O/75 PAN:25 NH₄Cl/PbO₂ + V₂O₅ has been fabricated and their discharge characteristics have been studied.     

Synthesis and impedance analysis of proton-conducting polymer electrolyte PVA:NH4F

An attempt has been made to prepare a new proton-conducting polymer electrolyte based on poly(vinyl alcohol) doped with ammonium fluoride (NH₄F) by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction and Fourier transform infrared spectroscopy studies. The highest ionic conductivity has been found to be 6.9?×?10^?6?Scm^?1 at ambient temperature (303 K) for 85PVA:15NH₄F polymer electrolyte. The conductance spectra contain a low frequency plateau region and high frequency dispersion region. The dielectric spectra exhibit the low frequency dispersion, which is due to space charge accumulation at the electrode–electrolyte interface. The modulus spectra indicate non-Debye nature of the material. The highest ionic conductivity polymer electrolyte 85PVA:15NH₄F has low activation energy 0.2 eV among the prepared polymer electrolytes.     

A novel application for oil palm empty fruit bunch: extraction and modification of cellulose for solid polymer electrolyte

Biopolymer-based materials from renewable sources are the core target of the researchers in modern time. Following this motivation, we have developed solid polymer electrolytes (SPEs) from empty fruit branch (EFB) of oil palm. The cellulose was extracted from EFB and modified to carboxymethyl cellulose (CMC) by its reaction with monochloroacetic acid in a strongly alkaline medium. The samples were characterized by FTIR, ¹³C NMR, and XRD to confirm the presence of different functional groups, new connectivity, and crystalline/amorphous nature of the materials, respectively. The CMC-based SPEs were fabricated by blending it with different quantities of lithium iodide (LiI) as dopant. The existence of polymer-salt interactions was revealed by FTIR analysis. The maximum ionic conductivity of 5.58?×?10^?3 S cm^?1 was observed on sample containing 65 wt% LiI with the lowest activation energy of 0.249 eV.     

A novel PEO-based blends solid polymer electrolytes doping liquid crystalline ionomers

A novel PEO-based blends solid polymer electrolytes doping liquid crystalline ionomers (LCI), PEO/PMMA/LiClO₄/LCI, and PEO/LiClO₄/LCI were prepared by solution casting technology. Scanning electron microscope (SEM) and energy-dispersive spectroscopy (EDS) analysis proved that LCI uniformly dispersed into the solid electrolytes and restrained phase separation of PEO and PMMA. Differential scanning calorimetry (DSC) results showed that LCI decreases the crystallinity of blends solid polymer electrolytes. Thermogravimetric analysis (TGA) proved LCI not only improved thermal stability of PEO/PMMA/LiClO₄ blends but also prevent PEO/PMMA from phase separation. Infrared spectra results illustrated that there exists interaction among Li⁺ and O, and LCI that promotes the synergistic effects between PEO and PMMA. The EIS result revealed that the conductivity of the electrolytes increases with LiClO₄ concentration in PEO/PMMA blends, but it increases at first and reaches maximum value of 2.53?×?10^?4 S/cm at 1.0 % of LCI. The addition of 1.0 % LCI increases the conductivity of the electrolytes due to that LCl promoting compatibility and interaction of PEO and PMMA. Under the combined action of rigidity induced crystal unit, soft segment and the terminal ionic groups in LCI, PEO/PMMA interfacial interaction are improved, the reduction of crystallinity degree of PEO leads Li⁺ migration more freely.     

Effect of liquid crystal ionomer intercalated montmorillonite nanocomposites on PEO/PLA solid polymer electrolytes

A series of solid polymer electrolytes (SPEs) based on poly (ethylene oxide)/polylactic acid (PEO/PLA) with liquid crystal ionomer (LCI) intercalated montmorillonite (MMT) nanocomposites (LCI-MMT) has been prepared by solution blending method. The effects of LCI-MMT on the structural, crystallization, thermal, and ionic conductivity properties of solid polymer electrolytes have been analyzed. It is demonstrated that the incorporation of LCI-MMT into the blend suppressed the crystallinity of PEO and increased the crystallinity of PLA. The maximum ionic conductivity is found to be in the range of 1.05?×?10^?5 S/cm for 0.5 wt% LCI-MMT, which is higher than that of the LCI-MMT-free polymer electrolyte (5.36?×?10^?6 S/cm) at room temperature.     

Nanocrystalline CoSn2-carbon composite electrode prepared by using sonochemistry

A sonochemical method has been used to prepare negative electrode materials containing intermetallic nanoparticles and polyacrylonitrile (PAN). The ultrasound irradiation is applied to achieve small particle size. After annealing at 490 °C under Ar-flow, the polymer PAN is partially carbonized and the metallic nanoparticles are surrounded by a carbonaceous matrix. The main metallic phase is CoSn₂. The carbonaceous coating and the surface oxides have been explored by using XPS. The resulting CoSn₂-carbonaceous phase electrode (CoSn₂@C) shows improved electrochemical behavior (ca. 450 mAh/g after 50 cycles) in comparison with previous reports on pure crystalline CoSn₂. The reaction between CoSn₂@C and Li has been studied by using XRD and ¹¹⁹Sn Mössbauer spectroscopy. The formation of large grains of crystalline Li_xSn phases after the first discharge is discarded. The small particle size which is achieved by using ultrasonication and the carbonaceous matrix contribute to maintain the Co-Sn interactions during the electrochemical cycling. The aggregation of the nanosized metallic particles upon electrochemical cycling can be suppressed by the carbonaceous matrix (pyrolytic PAN).     

Study on the effect of PEG in ionic transport for CMC-NH<Subscript>4</Subscript>Br-based solid polymer electrolyte

The present study investigates the ion transport properties and structural analysis of plasticized solid polymer electrolytes (SPEs) based on carboxymethyl cellulose (CMC)-NH₄Br-PEG. The SPE system was successfully prepared via solution casting and has been characterized by using electrical impedance spectroscopy (EIS), Fourier transform infrared (FTIR) spectroscopy, and x-ray diffraction (XRD) technique. The highest conductivity of the SPE system at ambient temperature (303 K) was found to be 1.12?×?10^?4 S/cm for un-plasticized sample and 2.48?×?10^?3 S cm^?1 when the sample is plasticized with 8 wt% PEG. Based on FTIR analysis, it shows that interaction had occurred at O–H, C=O, and C–O moiety from CMC when PEG content was added. The ionic conductivity tabulation of SPE system was found to be influenced by transport properties and amorphous characteristics as revealed by IR deconvolution method and XRD analysis.     

Infrared and conductivity studies on blends of PMMA/PEO based polymer electrolytes

Poly(methylmetacrylate)/poly(ethylene oxide) (PMMA/PEO) based polymer electrolytes were synthesized using the solution cast technique. Four systems of PMMA/PEO blends based polymer electrolytes films were investigated:

1. PMMA/PEO system,
2. PMMA/PEO + ethylene carbonate (EC) system,
3. PMMA/PEO + lithium hexafluorophosphate (LiPF₆) system and
4. PMMA/PEO + EC + LiPF₆ system.

The polymer electrolytes films were characterized by Impedance Spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). The FTIR spectra show the complexation occurring between the polymers, plasticizer and lithium salt. The FTIR results give further insight in the conductivity enhancement of PMMA/PEO blends based polymer electrolytes.