Penta­aqua­oxovanadium(IV) bis(trifluoro­methane­sulfonate)

The structure of the penta­aqua­oxo­vanadium(IV) ion in a salt with singly charged counter‐ions is presented. In [VO(H₂O)₅](CF₃SO₃)₂, the six‐coordinate V atom is coordinated to the oxo group with a short bond [1.577 (2) Å]. The equatorial V—O bond lengths are 2.0262 (18) and 2.0277 (17) Å. The aqua ligand trans to the oxo group is subject to its trans influence, which leads to a somewhat longer V—O bond [2.175 (2) Å]. In the structure, the cation and both anions are situated on crystallographic mirror planes. The cation and anions engage in a number of relatively long hydrogen bonds [2.725 (2)–2.834 (2) Å].     

Bis(ammonium) tris­(hexa­aqua­magnesium) tetra­kis(hydrogen phosphite)

The structure of the title compound, (NH₄)₂[Mg(H₂O)₆]₃(HPO₃)₄, consists of [Mg(H₂O)₆]²⁺ and (NH₄)⁺ cations and (HPO₃)²⁻ anions held together by an intricate network of hydrogen bonds involving all H atoms except for one linked directly to a P atom. The Mg²⁺ cations are octa­hedrally coordinated by six water mol­ecules. One of the Mg atoms is located on a site with 2/m symmetry, whereas the other Mg atom and the P and N atoms occupy sites with m symmetry.     

Darstellung,Charakterisierung und Reaktionsverhalten von Natrium‐ und Kaliumhydridosilylamiden R2(H)Si—N(M)R′ (M = Na,K) — Kristallstruktur von [(Me3C)2(H)Si—N(K)SiMe3]2·THF

Preparation, Characterization and Reaction Behaviour of Sodium and Potassium Hydridosilylamides R₂(H)Si—N(M)R′ (M = Na, K) — Crystal Structure of [(Me₃C)₂(H)Si—N(K)SiMe₃]₂ · THF The alkali metal hydridosilylamides R₂(H)Si—N(M)R′ 1a‐Na — 1d—Na and 1a‐K — 1d‐K ( a : R = Me, R′ = CMe₃; b : R = Me, R′ = SiMe₃; c : R = Me, R′ = Si(H)Me₂; d : R = CMe₃, R′= SiMe₃) have been prepared by reaction of the corresponding hydridosilylamines 1a — 1d with alkali metal M (M = Na, K) in presence of styrene or with alkali metal hydrides MH (M = Na, K). With NaNH₂ in toluene Me₂(H)Si—NHCMe₃ ( 1a ) reacted not under metalation but under nucleophilic substitution of the H(Si) atom to give Me₂(NaNH)Si—NHCMe₃ ( 5 ). In the reaction of Me₂(H)Si—NHSiMe₃ ( 1b ) with NaNH₂ intoluene a mixture of Me₂(NaNH)Si—NHSiMe₃ and Me₂(H)Si—N(Na)SiMe₃ ( 1b‐Na ) was obtained. The hydridosilylamides have been characterized spectroscopically. The spectroscopic data of these amides and of the corresponding lithium derivatives are discussed. The ²⁹Si‐NMR‐chemical shifts and the ²⁹Si—¹H coupling constants of homologous alkali metal hydridosilylamides R₂(H)Si—N(M)R′ (M = Li, Na, K) are depending on the alkali metal. With increasing of the ionic character of the M—N bond M = K > Na > Li the ²⁹Si‐NMR‐signals are shifted upfield and the ²⁹Si—¹H coupling constants except for compounds (Me₃C)(H)Si—N(M)SiMe₃ are decreased. The reaction behaviour of the amides 1a‐Na — 1c‐Na and 1a‐K — 1c‐K was investigated toward chlorotrimethylsilane in tetrahydrofuran (THF) and in n‐pentane. In THF the amides produced just like the analogous lithium amides the corresponding N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2a — 2c ) in high yields. The reaction of the sodium amides with chlorotrimethylsilane in nonpolar solvent n‐pentane produced from 1a‐Na the cyclodisilazane [Me₂Si—NCMe₃]₂ ( 8a ), from 1b‐Na and 1‐Na mixtures of cyclodisilazane [Me₂Si—NR′]₂ ( 8b , 8c ) and N‐silylation product 2b , 2c . In contrast to 1b‐Na and 1c‐Na and to the analogous lithium amides the reaction of 1b‐K and 1c‐K with chlorotrimethylsilane afforded the N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2b , 2c ) in high yields. The amide [(Me₃C)₂(H)Si—N(K)SiMe₃]₂·THF ( 9 ) crystallizes in the space group C2/c with Z = 4. The central part of the molecule is a planar four‐membered K₂N₂ ring. One potassium atom is coordinated by two nitrogen atoms and the other one by two nitrogen atoms and one oxygen atom. Furthermore K···H(Si) and K···CH₃ contacts exist in 9 . The K—N distances in the K₂N₂ ring differ marginally.     

Synthesis of well‐defined second‐generation dendritic polymers of isoprene (I) and styrene (S): (S2I)3, (SI′I)3, (I″I′I)3, and (I′2I)4

The synthesis of second‐generation (G‐2) dendritic polymers of isoprene (I) and styrene (S) was achieved with anionic polymerization high‐vacuum techniques and by performing the following steps: (1) selective reaction of a living chain with the chlorosilane group of 4‐(chlorodimethylsilyl)styrene (a dual‐functionality compound) to produce a macromonomer, (2) addition of a second living chain (same or different) to the double bond of the macromonomer, (3) polymerization of I with the anionic sites, and (4) reaction of the produced off‐center living species with trichloromethyl silane or tetrachlorosilane (CH₃SiCl₃ or SiCl₄). The combined characterization results showed that the G‐2 dendritic macromolecules synthesized—(S₂I)₃, (SI′I)₃, (I″I′I)₃, (I′₂I)₄—have a high molecular and compositional homogeneity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1519–1526, 2002     

Synthese,NMR‐Spektren und Molekülstruktur von [(CH3)2Ga{μ‐P(H)Si(CH3)3}2Ga(CH3)2{μ‐P(Si(CH3)3)2}Ga(CH3)2]

Synthesis, NMR Spectra and Structure of [(CH₃)₂Ga{μ‐P(H)Si(CH₃)₃}₂Ga(CH₃)₂{μ‐P(Si(CH₃)₃)₂}Ga(CH₃)₂] The title compound has been prepared in good yield by the reaction of [Me₂GaOMe]₃ (Me = CH₃) with HP(SiMe₃)₂ in toluene (ratio 1 : 1,1) and purified by crystallization from pentane or toluene, respectively. This organogallium compound forms (Ga–P)₃ ring skeletons with one Ga–P(SiMe₃)₂–Ga and two Ga–P(H)SiMe₃–Ga bridges and crystallizes in the monoclinic space group C2/c. The known homologous Al‐compound is isotypic, both (M^III–P)₃ heterocycles have twist‐conformations, the ligands of the monophosphane bridges have trans arrangements.     

Diamminebis(2,4,6‐tribromophenolato‐O)copper(II)

The title compound, [Cu(C₆H₂Br₃O)₂(NH₃)₂], a monomeric centrosymmetric Cu^II complex, crystallizes in the monoclinic system. The CuO₂N₂ coordination sphere is trans planar, [Cu—O 1.943 (5) Å and Cu—N 1.977 (6) Å], with the fifth and sixth coordination sites occupied by Br atoms from the phenoxide ions [Cu—Br 3.129 (1) Å], resulting in an elongated distorted octahedral structure for the CuO₂N₂Br₂ coordination. Each of the NH₃ groups forms two hydrogen bonds with the Br and O atoms of the CuO₂N₂Br₂ moiety of a neighbouring mol­ecule. This arrangement constitutes a one‐dimensional chain along the x axis of the unit cell.     

Hexa­aqua­bis­(di­methyl sulfoxide)­yttrium(III) trichloride

The title compound, [Y(C₂H₆OS)₂(H₂O)₆]Cl₃, contains the cation [Y(H₂O)₆{(CH₃)₂SO}₂]³⁺ with a distorted square antiprismatic geometry of the eight coordinated O atoms. The six water mol­ecules are coordinated with an average Y—O distance of 2.38 (2) Å, ranging from 2.360 (3) to 2.404 (3) Å. Each water mol­ecule forms two hydrogen bonds to the chloride anions with O—Cl distances ranging from 3.068 (4) to 3.422 (4) Å. The two di­methyl­ sulfoxide ligands, situated in the cis position with the O—Y—O angle equal to 83.22 (11)°, have Y—O distances of 2.269 (3) and 2.278 (3) Å.     

Triphenylphosphan-Nickel(0)-Komplexe mit Isocyanid-Liganden — [(RNC)nNi(PPh3)4–n] (n = 1–3)

Triphenylphosphane Nickel(0) Complexes with Isocyanide Ligands — [(RNC)_nNi(PPh₃)_4–n] (n = 1–3) Synthesis and properties of the isocyanide triphenylphosphane nickel(0) complexes [(RNC)Ni(PPh₃)₃], [(RNC)₂Ni(PPh₃)₂] and [(RNC)₃Ni(PPh₃)] (R = ^tBu, Cy, PhCH₂, p-TosCH₂) are described. I.r. and ³¹P n.m.r. spectra were recorded and the X-ray crystal structure of [(PhCH₂NC)₂Ni(PPh₃)₂] was determined.     

Zweikernige Palladium(II)‐, Platin(II)‐ und Iridium(III)‐Komplexe von Bis[imidazol‐4‐yl]alkanen

Dinuclear Palladium(II), Platinum(II), and Iridium(III) Complexes of Bis[imidazol‐4‐yl]alkanes The reaction of bis(1,1′‐triphenylmethyl‐imidazol‐4‐yl) alkanes ((CH₂)_n bridged imidazoles L(CH₂)_nL, n = 3–6) with chloro bridged complexes [R₃P(Cl)M(μ‐Cl)M(Cl)PR₃] (M = Pd, Pt; R = Et, Pr, Bu) affords the dinuclear compounds [Cl₂(R₃P)M–L(CH₂)_nL–M(PR₃)Cl₂] 1 – 17 . The structures of [Cl₂(Et₃P)Pd–L(CH₂)₃L–Pd(PEt₃)Cl₂] ( 1 ), [Cl₂(Bu₃P)Pd–L(CH₂)₄L–Pd(PBu₃)Cl₂] ( 10 ), [Cl₂(Et₃P)Pd–L(CH₂)₅L–Pd(PEt₃)Cl₂] ( 3 ), [Cl₂(Et₃P)Pt–L(CH₂)₃L–Pt(PEt₃)Cl₂] ( 13 ) with trans Cl–M–Cl groups were determined by X‐ray diffraction. Similarly the complexes [Cl₂(Cp*)Ir–L(CH₂)_nL–Ir(Cp*)Cl₂] (n = 4–6) are obtained from [Cp*(Cl)Ir(μ‐Cl)₂Ir(Cl)Cp*] and the methylene bridged bis(imidazoles).     

Halogenverbrückte Heterometallatomcluster der drei Typen Re2(CO)4L2(μ-X)2(μ-Y) (L = (C6H5)3P; X = Br,I; Y = GaRe(CO)4ax-L), Re2(CO)6L2(μ-X)(μ-GaX2) (X = I) und Re3(CO)9L3(μ-X)3(μ-Y) (X = Cl)

Halogeno-Bridged Heteronuclear Metal Atom Clusters of the Three Types Re₂(CO)₄L₂(μ-X)₂(μ-Y) (L = (C₆H₅)₃P; X = Br, I; Y = GaRe(CO)₄ax-L), Re₂(CO)₆L₂(μ-X) (μ-GaX₂) (X = I), and Re₃(CO)₉L₃ (μ-X)₃(μ₃-Y) (X = Cl) The title compounds of the both types Re₂(CO)₄L(μ-X)₂(μ-Y) [L = (C₆H₅)₃P; X = Br, I; Y = GaRe(CO)₄ax-L] and Re₃(CO)₉L₃(μ-X)₃ (μ₃-Y) (X = Cl) were prepared by the reaction of GaX₃ (X = Cl, Br, I) and Re₂(CO)₈(ax-L)₂ in boiling mesitylene solution. The obtained substance Re₂(CO)₄L₂(μ-I)₂(μ-Y) and carbon monoxide gave the compound of the third type Re₂(CO)₆L₂(μ-I)(μ- GaI₂). The last-named single iodo-bridged dirhenium cluster could be therefore a precursor complex of the double iodo-bridged compound. The four diamagnetic substances were characterized by ³¹P n.m.r. spectroscopy and their molecular structures were acertained by X-ray measurements. The result of the single crystal X-ray analysis of Re₂(CO)₄L₂(μ-Br)₂ [μ-GaRe(CO)₄ax-L], a bridged coordination octahedron pair with a common face, and that of the edge-bridged pair Re₂(CO)₆L₂(μ-I)(μ-GaI₂) each possessing a Re? Re bond are especially treated in the present work.     

Regioselective ortho‐Metallation of 2‐Diphenylphosphanylpyridine and (2‐(2‐Diphenylphosphanyl)phenyl)‐1‐3‐dioxalane with Methyltetrakis(trimethylphosphane)cobalt(I)

Co(CH₃)(PMe₃)₄ forms 100 % regioselectively with (2‐(2‐diphenylphosphanyl)phenyl)‐1,3‐dioxalane and 2‐diphenylphosphanyl‐pyridine, by elimination of methane, the four‐membered metallacycles Co{(C₃O₂HC₆H₃)P(C₆H₅)₂}(PMe₃)₃ ( 1 ) and Co{(CNC₄H₃)P(C₆H₅)₂}(PMe₃)₃ ( 4 ). The regioselectivity is independent of the steric requirement of the ortho substituent in the 2‐diphenylphosphanylaryl‐ligands. Oxidative addition with iodomethane transforms 1 and 4 into octahedral, diamagnetic low‐spin d⁶ complexes Co(CH₃)I‐{(C₃O₂HC₆H₃)P(C₆H₅)₂}(PMe₃)₂ ( 2 ) and Co(CH₃)I‐{(CNC₄H₃)P(C₆H₅)₂}(PMe₃)₂ ( 5 ). Under an atmosphere of carbon monoxide, insertion into the Co‐C bond results in ring expansion by forming the new assembled phosphanylbenzoyl complexes Co{(C₄O₃HC₆H₃)‐P(C₆H₅)₂}CO(PMe₃)₂ ( 3 ) and Co{(OCNC₄H₃)P(C₆H₅)₂}CO(PMe₃)₂ ( 6 ). The three different types of cobaltacycles are supported by X‐ray diffraction of 1 , 3 , 5 and 6 .     

Bis(N‐acetyltriethylphosphaniminium)‐tetraacetato‐dichloro‐dicuprat(II), [MeC(O)N(H)PEt3]2[Cu2(O2C–Me)4Cl2]

Bis(N‐acetyltriethylphosphaneiminium)‐tetraacetato‐dichloro‐dicuprate(II), [MeC(O)N(H)PEt₃]₂[Cu₂(O₂C–Me)₄Cl₂] The title compound has been prepared by the reaction of Me₃SiNPEt₃ with [Cu₂(O₂C–Me)₄] and MeC(O)Cl in dichloromethane solution to give colourless crystals which include four molecules CH₂Cl₂ per formula unit. The complex is characterized by IR spectroscopy and by a crystal structure determination. [MeC(O)N(H)PEt₃]₂[Cu₂(O₂C–Me)₄Cl₂] · 4 CH₂Cl₂: Space group P2₁/n, Z = 2, lattice dimensions at –70 °C: a = 794.1(1), b = 2356.9(6), c = 1327.3(2) pm; β = 91.00(1)°; R₁ = 0.0597. The structure consists of N‐acetyltriethylphosphaneiminium cations and dianions [Cu₂(O₂C–Me)₄Cl₂]^2– which form an iontriple with N–H…Cl hydrogen bridges.     

Synthesen und Strukturen neuer amido- und imidoverbrückter Cobaltcluster: [Li(THF)2]3[Co3(μ2-NHMes)3Cl6] (1), [Li(DME)3]2[Co18(μ4-NPh)3(μ3-NPh)12Cl3] (2), [Li(DME)3]2[Co6(μ4-NPh)(μ2-NPh)6(PPh2Et)2] (3) und [Li(THF)4][Co8(μ3-NPh)6(μ2-NPh)3(PPh3)2] (4)

Syntheses and Crystal Structures of new Amido- und Imidobridged Cobalt Clusters: [Li(THF)₂]₃[Co₃(μ₂-NHMes)₃Cl₆] (1), [Li(DME)₃]₂[Co₁₈(μ₄-NPh)₃(μ₃-NPh)₁₂Cl₃] (2), [Li(DME)₃]₂[Co₆(μ₄-NPh)(μ₂-NPh)₆(PPh₂Et)₂] (3), and [Li(THF)₄][Co₈(μ₃-NPh)₆(μ₂-NPh)₃(PPh₃)₂] (4) The reactions of cobalt(II)-chloride with the lithium-amides LiNHMes and Li₂NPh leads to an amido-bridged multinuclear complex [Li(THF)₂]₃[Co₃(μ₂-NHMes)₃Cl₆] ( 1 ) as well as to the imido-bridged cobalt cluster [Li(DME)₃]₂[Co₁₈(μ₄-NPh)₃(μ₃-NPh)₁₂Cl₃] ( 2 ). In the presence of tertiary phosphines two imido-bridged cobalt clusters [Li(DME)₃]₂[Co₆(μ₄-NPh)(μ₂-NPh)₆(PPh₂Et)₂] ( 3 ) and [Li(THF)₄][Co₈(μ₃-NPh)₆(μ₂-NPh)₃(PPh₃)₂] ( 4 ) result. The structures of 1 – 4 were characterized by X-ray single crystal structure analysis.     

Synthesen und Charakterisierungen der ersten Tris‐ und Tetrakis(trifluormethyl)palladate(II) und ‐platinate(II), [M(CF3)3(PPh3)]— und [M(CF3)4]2— (M = Pd,Pt)

Syntheses and Characterizations of the First Tris and Tetrakis(trifluoromethyl) Palladates(II) and Platinates(II), [M(CF₃)₃(PPh₃)]^— and [M(CF₃)₄]^2— (M = Pd, Pt) Tris(trifluoromethyl)(triphenylphosphino)palladate(II) and platinate(II), [M(CF₃)₃PPh₃]^—, and the tetrakis(trifluoromethyl)metallates, [M(CF₃)₄]^2— (M = Pd, Pt), are prepared from the reactions of [MCl₂(PPh₃)₂] and Me₃SiCF₃ / [Me₄N]F or [I(CF₃)₂]^— salts in good yields. [Me₄N][M(CF₃)₃(PPh₃)] crystallize isotypically in the orthorhombic space group Pnma (no. 62) with Z = 4. The NMR spectra of the new compounds are described.     

Assembly of Three 2D Metal‐Organic Frameworks (MOFs) Derived from Flexible Ligands, 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene (3‐bpd) and/or 1,2‐bis(4‐pyridyl)ethane (dpe)

Three coordination polymers, {[Cd(3‐bpd)₂(NCS)₂]×C₂H₅OH}_n ( 1 ), {[Cd(3‐bpd)(dpe)(NO₃)₂]×(3‐bpd)}₂ ( 2 ), {[Cd(dpe)₂(NCS)₂]×3‐bpd×2H₂O}_n ( 3 ) (3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene; dpe = 1,2‐bis(4‐pyridyl)ethane), were prepared and structurally characterized by a single‐crystal X‐ray diffraction method. In compound 1 , each Cd(II) ion is six‐coordinate bonded to six nitrogen atoms from four 3‐bpd and two NCS^? ligands. The 3‐bpd acts as a bridging ligand connecting the Cd(II) ion to generate a 2D layered metal‐organic framework (MOF) by using a rhomboidal‐grid as the basic building units with the 4⁴ topology. In compound 2 , the Cd(II) ion is also six‐coordinate bonded to four nitrogen atoms of two 3‐bpd, two dpe and two oxygen atoms of two NO₃^? ligands. The 3‐bpd and dpe ligands both adopt bis‐monodentate coordination mode connecting the Cd(II) ions to generate a 2D layered MOF by using a rectangle‐grid as the basic building units with the 4⁴ topology. In compound 3 , two crystallographically independent Cd(II) ions are both coordinated by four nitrogen atoms of dpe ligands in the basal plane and two nitrogen atom of NCS^? in the axial sites. The dpe acts as a bridging ligand to connect the Cd(II) ions forming a 2D interpenetrating MOFs by using a square‐grid as the basic unit with the 4⁴ topology. All of their 2D layered MOFs in compounds 1 ‐ 3 are then arranged in a parallel non‐interpenetrating ABAB—packing manner in 1 and 2 , and mutually interpenetrating manner in 3 , respectively, to extend their 3D supramolecular architectures with their 1D pores intercalated with solvent (ethanol in 1 or H₂O in 3 ) or free 3‐bpd molecules in 2 and 3 , respectively. The photoluminescence measurements of 1 ‐ 3 reveal that the emission is tentatively assigned to originate from π‐π* transition for 1 and 2 and probably due to ligand‐center luminescence for compounds 3 , respectively.     

Neue Phosphor-verbrückte Übergangsmetallcarbonyl-Komplexe Die Kristallstrukturen von [Re2(CO)7(PtBu)3], [Co4(CO)10(PtBu)2], [Ir4(CO)6(PtBu)6] und [Ni4(CO)10(PiPr)6]

New Phosphorus-bridged Transition Metal Carbonyl Complexes. The Crystal Structures of [Re₂(CO)₇(P^tBu)₃], [Co₄(CO)₁₀(P^tBu)₂], [Ir₄(CO)₆(P^tBu)₆], and [Ni₄(CO)₁₀(PⁱPr)₆], (P^tBu)₃ reacts with [Mn₂(CO)₁₀], [Re₂(CO)₁₀], [Co₂(CO)₈] and [Ir₄(CO)₁₂] to form the multinuclear complexes [M₂(CO)₇(P^tBu)₃] (M = Re ( 1 ), Mn ( 5 )), [Co₄(CO)₁₀(P^tBu)₂] ( 2 ) and [Ir₄(CO)₆(P^tBu)₆] ( 3 ). The reaction of (PⁱPr)₃ with [Ni(CO)₄] leads to the tetranuclear cluster [Ni₄(CO)₁₀(PⁱPr)₆] ( 4 ). The complex structures were obtained by X-ray single crystal structure analysis: ( 1 : space group P1 (Nr. 2), Z = 2, a = 917.8(3) pm, b = 926.4(3) pm, c = 1 705.6(7) pm, α = 79.75(3)°, β = 85.21(3)°, γ = 66.33(2)°; 2 : space group C2/c (Nr. 15), Z = 4, a = 1 347.7(6) pm, b = 1 032.0(3) pm, c = 1 935.6(8) pm, β = 105.67(2)°; 3 : space group P1 (Nr. 2), Z = 4, a = 1 096.7(4)pm, b = 1 889.8(10)pm, c = 2 485.1(12) pm, α = 75.79(3)°, β = 84.29(3)°, γ = 74.96(3)°; 4 : space group P2₁/c (Nr. 14), Z = 4, a = 2 002.8(5) pm, b = 1 137.2(8) pm, c = 1 872.5(5) pm, β = 95.52(2)°).     

trans‐Bis(hinokitiolato)copper(II) trans‐bis(hinokitiolato)palladium(II) cocrystals with (5/1) and (3/2) formulations

trans‐Bis(3‐isopropyl‐7‐oxocyclohepta‐1,3,5‐trien‐1‐olato)copper(II) trans‐bis(3‐isopropyl‐7‐oxocyclohepta‐1,3,5‐trien‐1‐olato)palladium(II) as the (5/1) and (3/2) composites [Cu(C₁₀H₁₁O₂)₂]·0.2[Pd(C₁₀H₁₁O₂)₂] and [Cu(C₁₀H₁₁O₂)₂]·0.67[Pd(C₁₀H₁₁O₂)₂], respectively, where 3‐isopropyl‐7‐oxocyclohepta‐1,3,5‐trien‐1‐olate is the systematic name for the hinokitiolate anion (hino), are the first mixed‐metal cocrystalline products isolated from the M_x(hino)_y family of complexes. These cocrystals contain square‐planar trans‐Cu(hino)₂ and trans‐Pd(hino)₂ molecules possessing crystallographic inversion symmetry. The bulk formulation for these cocrystalline compounds is Cu_1−xPd_x(hino)₂, where x is 0.166 (4) for the (5/1) product and 0.399 (4) for the (3/2) product. This bulk formulation is simply a convenient average expression of the whole‐molecule substitutional disorder present in these compounds. The M—O bonds are in the range 1.9210 (11)–1.9453 (10) Å, the O—M—O bite angles are in the range 82.94 (4)–83.36 (4)°, and all of the hinokitiolate O atoms are involved in C—H...O hydrogen‐bonding interactions.     

Preparation,Spectroscopic Properties,and Crystal Structures of Fe2(CO)6(μ‐CO)(μ‐CF2)2, Fe2(CO)6(μ‐CO)2(μ‐CF2), and Fe2(CO)6(μ‐CF2)(PPh3)2 – Theoretical Studies of Methylenic vs. Carbonyl Bridges in Diiron Complexes

The reaction of Na₂[Fe(CO)₄] with Br₂CF₂ in n‐pentane generates a mixture of the compounds (CO)₃Fe(μ‐CO)_3–n(μ‐CF₂)_nFe(CO)₃ ( 2 , n = 2; 3 , n = 1) in low yields with 3 as the main product. 3 is obtained free from 2 by reacting Br₂CF₂ with Na₂[Fe₂(CO)₈]. The non‐isolable monomeric complex (CO)₄Fe=CF₂ ( 1 ) can probably considered as the precursor for 2 . 3 reacts with PPh₃ with replacement of two CO ligands to form Fe₂(CO)₆(μ‐CF₂)(PPh₃)₂ ( 4 ). The complexes 2 – 4 were characterized by single crystal X‐ray diffraction. While the structure of 2 is strictly similar to that of Fe₂(CO)₉, the structure of 3 can better be described as a resulting from superposition of the two enantiomers 3 a and 3 b with two semibridging CO groups. Quantum chemical DFT calculations for the series (CO)₃Fe(μCO)_3–n(μ‐CF₂)_nFe(CO)₃ (n = 0, 1, 2, 3) as well as for the corresponding (μ‐CH₂) derivatives indicate that the progressively larger σ donor and π acceptor properties for the bridging ligands, in the order CO < CF₂ < CH₂, favor a stronger Fe–Fe bond.     

The Synthesis of tert‐Butyl(dichloromethyl)bis(trimethylsilyl)silane and (Dibromomethyl)ditert‐butyl(trimethylsilyl)silane and their Reactions with Organolithium Derivatives

tert‐Butyl(dichloromethyl)bis(trimethylsilyl)silane ( 4 ), prepared by the reaction of tert‐butylbis(trimethylsilyl)silane with trichloromethane and potassium tert‐butoxide, reacted with 2,4,6‐triisopropylphenyllithium (TipLi) (molar ratio 1 : 2) at room temperature to give (after hydrolytic workup) the silanol tBu(2,4,6‐iPr₃C₆H₂)Si(OH)–CH(SiMe₃)₂ ( 15 ). The formation of 15 is discussed as proceeding through the indefinitely stable silene tBu(2,4,6‐iPr₃C₆H₂)Si=C(SiMe₃)₂ ( 13 ), but attempts to isolate the compound failed. Treatment of (dibromomethyl)ditert‐butyl(trimethylsilyl)silane ( 7 ), made from tBu₂(Me₃Si)SiH, HCBr₃ and KOtBu, with methyllithium (1 : 3) at –78 °C afforded tBu₂MeSi–CHMeSiMe₃ ( 19 ); 7 and phenyllithium (1 : 3) under similar conditions gave tBu₂PhSi–CH₂SiMe₃ ( 20 ). The reaction paths leading to 15 , 19 and 20 are discussed. Reduction of 7 with lithium in THF produced the substituted ethylene tBu₂(Me₃Si)SiCH=CHSitBu₂SiMe₃ ( 21 ). For 21 the results of an X‐ray structural analysis are given.     

Bis(4‐aminopyridine)silver(I) nitrate and tris(2,6‐diaminopyridine)silver(I) nitrate

The bis(4‐aminopyridine)silver(I) cation in [Ag(C₅H₆N₂)₂]NO₃ has the Ag atom on a twofold axis and displays an N—Ag—N angle of 174.43 (15)° and an Ag—N distance of 2.122 (3) Å. The two ligands are planar and the angle between the two ligand planes is 79.45 (9)°. The pyridine rings are stacked in piles with an interplanar distance of 3.614 (5) Å, a distance that strongly suggests that pyridine π–π interactions have an appreciable importance with respect to the non‐bonded crystal organization. The tris(2,6‐diaminopyridine)­silver(I) cation in [Ag(C₅H₇N₃)₃]NO₃ has Ag—N distances of 2.243 (2), 2.2613 (17) and 2.4278 (18) Å, and N—Ag—N angles of 114.33 (7), 134.91 (7) and 114.33 (7)°. The Ag⁺ ion is situated 0.1531 (2) Å from the plane defined by the three pyridine N atoms.