A Q-band pulse EPR/ENDOR spectrometer and the implementation of advanced one- and two-dimensional pulse EPR methodology

A versatile high-power pulse Q-band EPR spectrometer operating at 34.5--35.5 GHz and in a temperature range of 4--300 K is described. The spectrometer allows one to perform one- and two-dimensional multifrequency pulse EPR and pulse ENDOR experiments, as well as continuous wave experiments. It is equipped with two microwave sources and four microwave channels to generate pulse sequences with different amplitudes, phases, and carrier frequencies. A microwave pulse power of up to 100 W is available. Two channels form radiofrequency pulses with adjustable phases for ENDOR experiments. The spectrometer performance is demonstrated by single crystal pulse ENDOR experiments on a copper complex. A HYSCORE experiment demonstrates that the advantages of high-field EPR and correlation spectroscopy can be combined and exploited at Q-band. Furthermore, we illustrate how this combination can be used in cases where the HYSCORE experiment is no longer effective at 35 GHz because of the shallow modulation depth. Even in cases where the echo modulation is virtually absent in the HYSCORE experiment at Q-band, matched microwave pulses allow one to get HYSCORE spectra with a signal-to-noise ratio as good as at X-band. Finally, it is shown that the high microwave power, the short pulses, and the broad resonator bandwidth make the spectrometer well suited to Fourier transform EPR experiments.     

A tunable general purpose Q-band resonator for CW and pulse EPR/ENDOR experiments with large sample access and optical excitation

We describe a frequency tunable Q-band cavity (34 GHz) designed for CW and pulse Electron Paramagnetic Resonance (EPR) as well as Electron Nuclear Double Resonance (ENDOR) and Electron Electron Double Resonance (ELDOR) experiments. The TE(011) cylindrical resonator is machined either from brass or from graphite (which is subsequently gold plated), to improve the penetration of the 100 kHz field modulation signal. The (self-supporting) ENDOR coil consists of four 0.8mm silver posts at 2.67 mm distance from the cavity center axis, penetrating through the plunger heads. It is very robust and immune to mechanical vibrations. The coil is electrically shielded to enable CW ENDOR experiments with high RF power (500 W). The top plunger of the cavity is movable and allows a frequency tuning of ±2 GHz. In our setup the standard operation frequency is 34.0 GHz. The microwaves are coupled into the resonator through an iris in the cylinder wall and matching is accomplished by a sliding short in the coupling waveguide. Optical excitation of the sample is enabled through slits in the cavity wall (transmission ～60%). The resonator accepts 3mm o.d. sample tubes. This leads to a favorable sensitivity especially for pulse EPR experiments of low concentration biological samples. The probehead dimensions are compatible with that of Bruker flexline Q-band resonators and it fits perfectly into an Oxford CF935 Helium flow cryostat (4-300 K). It is demonstrated that, due to the relatively large active sample volume (20-30 μl), the described resonator has superior concentration sensitivity as compared to commercial pulse Q-band resonators. The quality factor (Q(L)) of the resonator can be varied between 2600 (critical coupling) and 1300 (over-coupling). The shortest achieved π/2-pulse durations are 20 ns using a 3 W microwave amplifier. ENDOR (RF) π-pulses of 20 μs ((1)H @ 51 MHz) were obtained for a 300 W amplifier and 7 μs using a 2500 W amplifier. Selected applications of the resonator are presented.     

Pulsed Electron-Nuclear Double Resonance (ENDOR) at 140 GHz

We describe a spectrometer for pulsed ENDOR at 140 GHz, which is based on microwave IMPATT diode amplifiers and a probe consisting of a TE011 cavity with a high-quality resonance circuit for variable radiofrequency irradiation. For pulsed EPR we obtain an absolute sensitivity of 3x10(9) spins/Gauss at 20 K. The performance of the spectrometer is demonstrated with pulsed ENDOR spectra of a standard bis-diphenylene-phenyl-allyl (BDPA) doped into polystyrene and of the tyrosyl radical from E. coli ribonucleotide reductase (RNR). The EPR spectrum of the RNR tyrosyl radical displays substantial g-anisotropy at 5 T and is used to demonstrate orientation-selective Davies-ENDOR.     

A Homebuilt ESE Spectrometer on the Basis of a High-Power Q-Band Microwave Bridge

We present a Q-band spectrometer which was built recently at the Institute of Physical Chemistry of the University of Stuttgart. It allows us to perform the field-sweep electron spin echo (ESE), pulsed electron–nuclear double resonance (ENDOR), relaxation and electron spin echo envelope modulation experiments both at room and low (down to 1.5 K) temperatures. The spectrometer consists of an electromagnet, digital field controller, pulsed microwave bridge, probehead, cryostat, radio frequency unit, pulse programmer and data acquisition electronics. The Q-band microwave bridge with 10.8 W output power is based on a two-stage IMPATT-diode pulse amplifier. The commercial Varian electromagnet system is controlled by a 24-bit home-built digital controller. The external devices are interfaced to the two PCs via GPIB and LAN. The spectrometer control software was developed in Visual C++. It consists of two programs running synchronously on the control PCs. The spectrometer is equipped with a cylindrical TE₀₁₁ cavity constructed both for ESE and for pulsed ENDOR. The cavity fits into a liquid He cryostat thus allowing low-temperature experiments. An 8-bit data acquisition digitizer is used to collect the echo signals, and the PBESR-PRO-400 digital word generator orchestrates the pulse experiments and sets pulse sequences of the microwave bridge. The spectrometer performance is demonstrated on nitrogen impurities in a polycrystalline synthetic diamond, on silver clusters supported on NaA zeolite and electron-irradiated tooth enamel. Authors' address: Igor Tkach, Institute of Physical Chemistry, University of Stuttgart, Pfaffenwaldring 55, 70569 Stuttgart, Germany     

A continuous-wave and pulsed electron spin resonance spectrometer operating at 275 GHz

An electron paramagnetic resonance (EPR) spectrometer is described which allows for continuous-wave and pulsed EPR experiments at 275 GHz (wavelength 1.1 mm). The related magnetic field of 9.9 T for g approximately 2 is supplied by a superconducting solenoid. The microwave bridge employs quasi-optical as well as conventional waveguide components. A cylindrical, single-mode cavity provides a high filling factor and a high sensitivity for EPR detection. Even with the available microwave power of 1 mW incident at the cavity a high microwave magnetic field B1 is obtained of about 0.1 mT which permits pi/2-pulses as short as 100 ns. The performance of the spectrometer is illustrated with the help of spectra taken with several samples.     

High-field/high-frequency EPR spectrometer operating in pulsed and continuous-wave mode at 180 GHz

A novel electron paramagnetic resonance (EPR) spectrometer is reported, which has been developed to allow pulsed EPR experiments with high sensitivity and time resolution at a microwave (MW) frequency of 180 GHz (G-band) and wavelengths of approximately 1.6 mm. This corresponds to a magnetic field of about 6.4 T forg ≈ 2 signals. The “hybrid” system architecture combines components of quasioptical as well as conventional MW techniques, making it possible to achieve excellent spectrometer performance with respect to sensitivity and time resolution. Quasioptical MW components have been used to design an MW circulator allowing high sensitivity and low bias operation in the reflection mode. A miniaturized, closed-type cylindrical cavity provides a high sample filling factor and an adequate MW field strength (B₁) enhancement and thus permits reasonably short MW pulses (60 ns for a π/2 pulse) even with a moderate MW input power (15 mW at the cavity). Commercial quartz capillaries (up to 0.5 mm internal diameter) can be used as sample holders for a broad range of applications.     

A Dynamic Nuclear Polarization spectrometer at 95 GHz/144 MHz with EPR and NMR excitation and detection capabilities

A spectrometer specifically designed for systematic studies of the spin dynamics underlying Dynamic Nuclear Polarization (DNP) in solids at low temperatures is described. The spectrometer functions as a fully operational NMR spectrometer (144 MHz) and pulse EPR spectrometer (95 GHz) with a microwave (MW) power of up to 300 mW at the sample position, generating a MW B(1) field as high as 800 KHz. The combined NMR/EPR probe comprises of an open-structure horn-reflector configuration that functions as a low Q EPR cavity and an RF coil that can accommodate a 30-50 μl sample tube. The performance of the spectrometer is demonstrated through some basic pulsed EPR experiments, such as echo-detected EPR, saturation recovery and nutation measurements, that enable quantification of the actual intensity of MW irradiation at the position of the sample. In addition, DNP enhanced NMR signals of samples containing TEMPO and trityl are followed as a function of the MW frequency. Buildup curves of the nuclear polarization are recorded as a function of the microwave irradiation time period at different temperatures and for different MW powers.     

ENDOR spectroscopy at 275 GHz

A pulsed ENDOR spectrometer operating at a microwave frequency of 275 GHz is described. The results demonstrate that this type of spectroscopy can now be performed routinely at this high microwave frequency. The advantages compared to conventional EPR frequencies are the high spectral resolution, time resolution, and sensitivity.     

Fourier-transform EPR at high-field/high-frequency (3.4 T/95 GHz) using broadband stochastic microwave excitation

Stochastic excitation with a full-width-half-maximum bandwidth of 250 MHz was used to perform Fourier-transform (FT) high-field/high-frequency electron paramagnetic resonance (EPR) at 3.4T/95 GHz (W-band). Thereby, the required microwave peak power is reduced by a factor of tau(p)/T1 as compared to equivalent pulsed FT EPR in which the spin system with spin-lattice relaxation time T1 is excited by a single microwave pulse of length tau(p). Stochastic EPR is particularly interesting under high-field/high-frequency conditions, because the limited output power of mm microwave sources, amplifiers, and mixers makes pulse FT EPR in that frequency domain impossible, at least for the near future. On the other hand, FT spectroscopy offers several advantages compared to field-swept magnetic resonance methods, as is demonstrated by its success in NMR and X-band EPR. In this paper we describe a novel stochastic W-band microwave bridge including a bimodal induction mode transmission resonator that serves for decoupling the microwave excitation and signal detection. We report first EPR measurements and discuss experimental difficulties as well as achieved sensitivity. Moreover, we discuss future improvements and the possibility for an application of stochastic W-band FT EPR to transient signals such as those of photoexcited radical pairs in photosynthetic reaction centers.     

Longitudinally detected EPR: improved instrumentation and new pulse schemes.

A new setup for longitudinal detection (LOD) of EPR signals based on a commercial pulse EPR spectrometer equipped with an ENDOR probehead is presented. The design is suited for pulse LOD EPR and amplitude-modulated cw LOD EPR experiments. The sensitivity is substantially increased compared with earlier designs. Two new pulse schemes that take full advantage of the special properties of the setup are invented. In transient-nutation longitudinally detected EPR (TN-LOD EPR), the nutation of magnetization during a microwave pulse is used to measure the EPR signal. In pulse-train excited longitudinally detected EPR (PT-LOD EPR), a train of microwave pulses that periodically inverts the magnetization is applied. First experimental results on radicals and metal complexes at room temperature are presented.     

A novel loop-gap resonator probehead for EPR and ENDOR at X-band

An EPR and ENDOR probehead with a loop-gap resonator for X-band is described. The novel feature of the construction is that an iris-type coupling of the resonator is used instead of the conventional antenna coupling. The ENDOR coil combines the role of creating the radio frequency field and that of a shield for the microwave loop-gap structure. Hence, in order to accommodate the iris and waveguide, a pair of RF coils is used in conjunction with a reduced waveguide with dielectric filling. This arrangement simplifies matching the resonator to the microwave bridge, and standard EPR cryostats can be used making sample manipulation more convenient.     

Stochastic excitation and Hadamard correlation spectroscopy with bandwidth extension in RF FT-EPR

The application of correlation spectroscopy employing stochastic excitation and the Hadamard transform to time-domain Fourier transform electron paramagnetic resonance (FT-EPR) spectroscopy in the radiofrequency (RF) band is described. An existing, time-domain FT-EPR spectrometer system with a Larmor frequency (L(f)) of 300 MHz was used to develop this technique by incorporating a pseudo-random pulse sequence generator to output the maximum length binary sequence (MLBS, 10- and 11-bit). Software developed to control the EPR system setup, acquire the signals, and post process the data, is outlined. The software incorporates the Hadamard transform algorithm to perform the required cross-correlation of the acquired signal and the MLBS after stochastic excitation. To accommodate the EPR signals, bandwidth extension was accomplished by sampling at a rate many times faster than the RF pulse repetition rate, and subsequent digital signal processing of the data. The results of these experiments showed that there was a decrease in the total acquisition time, and an improved free induction decay (FID) signal-to-noise (S/N) ratio compared to the conventional coherent averaging approach. These techniques have the potential to reduce the RF pulse power to the levels used in continuous wave (CW) EPR while retaining the advantage of time-domain EPR methods. These methods have the potential to facilitate the progression to in vivo FT-EPR imaging of larger volumes.     

Electron paramagnetic resonance W-band spectrometer with a low-noise amplifier

The Mark II W-band (94 GHz) EPR spectrometer with a low-noise millimeter-wave amplifier is described. The microwave bridge is of a high-sensitivity homodyne design. Signal-to-noise ratios were measured for a number of detectors with and without the low-noise amplifier. The signal-to-noise ratio was determined not only by the type of detector but also how well it was matched. Without a microwave preamplifier, a hot-electron bolometer provides the best signal-to-noise ratio. Addition of a low-noise microwave preamplifier to the CW homodyne bridge gives a 10 dB improvement in the noise figure of the receiver at a modulation frequency of 100 kHz. A greater improvement in the signal-to-noise ratio is seen at low modulation frequencies (1–10 kHz), making the low-noise amplifier useful for systems with large linewidths. This allows larger modulation amplitudes to be used without causing significant cavity heating or microphonics. The W-band spectrometer is capable of rapid sweeps from 0 to 7 T, as well as narrower (0.1 T) high-resolution sweeps. It is suitable for a wide variety of samples including liquids and samples cooled to sub-liquid-helium temperatures.     

Anomalous Phases in Cavity-Free 240 GHz Pulsed ENDOR Spectra of 1.44 GeV Xe-Irradiated LiF

Paramagnetic centers generated by swift heavy ion irradiation of LiF crystals could be identified as electrons trapped at regular anion vacancy sites (F centers). Well-resolved electron-nuclear double resonance (ENDOR) spectra resulting from the hyperfine interaction with ⁷Li and ¹⁹F nuclei located in six different shells could be recorded. In order to preserve the millimeter-sized crystals, a cavity-free setup was used for the ENDOR experiments at an electronic Larmor frequency of 240 GHz. Apparently even under conditions of extremely high local energy loss in the ion track, the local density of persistent F centers is still sufficiently low to prevent distortions of the ionic crystal. The spread of hyperfine coupling constants was less than 5 %. Neither in electron paramagnetic resonance (EPR) nor in ENDOR spectra there was evidence for different types of paramagnetic centers. When performing ENDOR by applying the radiofrequency pulse directly after the 3-pulse Mims-type microwave sequence, an anomalous ENDOR effect was observed. The observed “positive” and “negative” ENDOR response can be attributed to efficient hole and anti-hole formation in the inhomogeneously broadened EPR spectrum and can be used to determine the sign of hyperfine coupling constants.     

HYSCORE and DEER with an upgraded 95GHz pulse EPR spectrometer

The set-up of a new microwave bridge for a 95 GHz pulse EPR spectrometer is described. The virtues of the bridge are its simple and flexible design and its relatively high output power (0.7 W) that generates pi pulses of 25 ns and a microwave field, B(1)=0.71 mT. Such a high B(1) enhances considerably the sensitivity of high field double electron-electron resonance (DEER) measurements for distance determination, as we demonstrate on a nitroxide biradical with an interspin distance of 3.6 nm. Moreover, it allowed us to carry out HYSCORE (hyperfine sublevel-correlation) experiments at 95 GHz, observing nuclear modulation frequencies of 14N and 17O as high as 40 MHz. This opens a new window for the observation of relatively large hyperfine couplings, yet not resolved in the EPR spectrum, that are difficult to observe with HYSCORE carried out at conventional X-band frequencies. The correlations provided by the HYSCORE spectra are most important for signal assignment, and the improved resolution due to the two dimensional character of the experiment provides 14N quadrupolar splittings.     

High-field DNP and ENDOR with a novel multiple-frequency resonance structure.

We describe a new triply tuned (e(-), (1)H, and (13)C) resonance structure operating at an electron Larmor frequency of 139.5 GHz for dynamic nuclear polarization (DNP) and electron nuclear double-resonance (ENDOR) experiments. In contrast to conventional double-resonance structures, the body of the microwave cavity simultaneously acts as a NMR coil, allowing for increased efficiency of radiofrequency irradiation while maintaining a high quality factor for microwave irradiation. The resonator design is ideal for low-gamma-nuclei ENDOR, where sensitivity is limited by the fact that electron spin relaxation times are on the order of the RF pulse lengths. The performance is demonstrated with (2)H ENDOR on a standard perdeuterated bis-diphenylene-phenyl-allyl stable radical. In DNP experiments, we show that the use of this resonator, combined with a low microwave power setup (17 mW), leads to significantly higher (1)H signal enhancement (epsilon approximately 400 +/- 50) than previously achieved at 5-T fields. The results emphasize the importance of optimizing the microwave B(1) field by improving either the quality factor of the microwave resonator or the microwave power level.     

A Q-band pulsed ENDOR spectrometer for the study of transition metal ion complexes in solids

We describe the design of a pulsed electron nuclear double resonance (ENDOR) spectrometer operating at Q-band frequencies (35 GHz) for studies of transition metal ion complexes in the temperature range between 4.2 and 297 K. Specific features of the spectrometer are a microwave IMPATT generator, a homebuilt cavity, and a commercial Bruker magnet. Standard Davies and Mims ENDOR sequences have been implemented. The performance of the spectrometer is demonstrated for a broad radio frequency range by¹H,¹⁴N,³¹P,¹³³Cs, and²⁰⁷Pb pulsed ENDOR experiments of Cu²⁺, Cr⁵⁺, and V⁴⁺ transition metal ion complexes in both single crystals and disordered materials.     

Probeheads and instrumentation for pulse EPR and ENDOR spectroscopy with chirped radio frequency pulses and magnetic field steps

Probeheads and instrumentation for modern X-band pulse EPR and ENDOR experiments with chirped radio-frequency pulses and rapidB ₀-field pulses are described. The resonant frequency, the quality factor and, for the first time, the response of a pulse ENDOR resonator structure to a microwave pulse in the subnanosecond time scale have been calculated. The performance of the probeheads for time-domain chirp ENDOR and electron Zeeman-resolved EPR is demonstrated.     

A CW and pulse EPR spectrometer operating at 122 and 244 GHz using a quasi-optical bridge and a cryogen-free 12 T superconducting magnet

A high-field continuous-wave (CW) and pulse electron paramagnetic resonance spectrometer operating at 122 and 244 GHz is described. The instrument is based on a millimeter-wave bridge built from quasi-optical components. To improve the sensitivity, a cryo-cooled detector/mixer is used. The magnetic field is generated using a cryogen-free superconducting 12 T magnet (warm bore, 88 mm) equipped with a helium-flow cryostat for sample cooling. The advantages of this spectrometer are described and first results (obtained in CW mode) on different types of samples at 122 and 244 GHz are presented. The extensions to pulse operation as well as double resonance techniques (electron-electron and electron-nuclear) are briefly discussed.     

Advantages of digital phase-sensitive detection for upgrading an obsolete CW EPR spectrometer

The replacement of the commonly used analog phase-sensitive detection (PSD) by digital PSD for demodulation of electron paramagnetic resonance (EPR) signals is suggested for upgrading of an out-of-date EPR spectrometer. Connection of the microwave bridge output to a fast analog-digital converter (ADC) eliminates some of the spectrometer’s components: the electronics responsible for analog PSD, ADC for sampling of demodulated signals, and a computer, as well as the usage of some of the spectrometer’s settings. The spectrometer is reduced to a magnet, microwave bridge, and personal computer containing an ADC board. EPR signals digitized for a set of magnetic field positions form a two-dimensional array which is stored in a personal computer. Demodulation and filtering are done numerically to produce a conventional EPR spectrum. In comparison with analog PSD, this numerical approach does not eliminate the out-of-phase component of the signal and the signals at the higher harmonics of the modulation frequency. The details of modernizing the Bruker ER200E SRC EPR spectrometer are discussed to demonstrate these and other advantages of digital demodulation.