AlN, GaN, AlxGa1 − xN nanotubes and GaN/AlxGa1 − xN nanotube heterojunctions

Semiconductor optoelectronic devices based on GaN and on InGaN or AlGaN alloys and superlattices can operate in a wide range of wavelengths, from far infrared to near ultraviolet region. The efficiency of these devices could be enhanced by shrinking the size and increasing the density of the semiconductor components. Nanostructured materials are natural candidates to fulfill these requirements. Here we use the density functional theory to study the electronic and structural properties of (10,0) GaN, AlN, Al_xGa_1 − xN nanotubes and GaN/Al_xGa_1 − xN heterojunctions, 0<x<1. The Al_xGa_1 − xN nanotubes exhibit direct band gaps for the whole range of Al compositions, with band gaps varying from 3.45 to 4.85 eV, and a negative band gap bowing coefficient of −0.14 eV. The GaN/Al_xGa_1 − xN nanotube heterojunctions show a type-I band alignment, with the valence band offsets showing a non-linear dependence with the Al content in the nanotube alloy. The results show the possibility of engineering the band gaps and band offsets of these III-nitrides nanotubes by alloying on the cation sites.     

Optical and magnetic properties of (Ga1−xMnx)N/GaN digital ferromagnetic heterostructures

(Ga_1−xMn_x)N/GaN digital ferromagnetic heterostructures (DFHs) and (Ga_1−xMn_x)N/GaN grown on GaN buffer layers by using molecular beam epitaxy have been investigated. The photoluminescence (PL) spectra showed band-edge exciton transitions. They also showed peaks corresponding to the neutral donor-bound exciton and the exciton transitions between the conduction band and the Mn acceptor, indicative of the Mn atoms acting as substitution. The magnetization curves as functions of the magnetic field at 5 K indicated that the saturation magnetic moment in the (Ga_1−xMn_x)N/GaN DFHs decreased with increasing Mn mole fraction and that the saturation magnetic moment and the coercive field in the (Ga_1−xMn_x)N/GaN DFHs were much larger than those in (Ga_1−xMn_x)N thin films. These results indicate that the (Ga_1−xMn_x)N/GaN DFHs hold promise for potential applications in spintronic devices.     

Electronic structures of zigzag AlN, GaN nanoribbons and AlxGa1−xN nanoribbon heterojunctions: First-principles study

The electronic and structural properties of zigzag aluminum nitride (AlN), gallium nitride (GaN) nanoribbons and Al_xGa_1−xN nanoribbon heterojunctions are investigated using the first-principles calculations. Both AlN and GaN ribbons are found to be semiconductor with an indirect band gap, which decreases monotonically with the increased ribbon width, and approaching to the gaps of their infinite two dimensional graphitic-like monolayer structures, respectively. Furthermore, the band gap of Al_xGa_1−xN nanoribbon heterojunctions is closely related to Al (and/or Ga) concentrations. The Al_xGa_1−xN nanoribbon of width n=8 shows a continuously band gap varying from about 2.2 eV-3.1 eV as x increases from 0 to 1. The large ranged tunable band gaps in such a quasi one dimension structure may open up new opportunities for these AlN/GaN based materials in future optoelectronic devices.     

Experimental investigation of long-wavelength optical lattice vibrations in quaternary AlxInyGa1−x−yN alloys and comparison with results from the pseudo-unit cell model

Raman and Fourier transform infrared (FTIR) spectroscopies have been utilized to measure long-wavelength optical lattice vibrations of high-quality quaternary Al_xIn_yGa_1−x−yN thin films at room temperature. The Al_xIn_yGa_1−x−yN films were grown on c-plane (0 0 0 1) sapphire substrates with AlN as buffer layers using plasma assisted molecular beam epitaxy (PA-MBE) technique with aluminum (Al) mole fraction x ranging from 0.0 to 0.2 and constant indium (In) mole fraction y=0.1. Pseudo unit cell (PUC) model was applied to investigate the phonons frequency, mode number, static dielectric constant, and high frequency dielectric constant of the Al_xIn_yGa_1−x−yN mixed crystals. The theoretical results were compared with the experimental results obtained from the quaternary samples by using Raman and FTIR spectroscopies. The experimental results indicated that the Al_xIn_yGa_1−x−yN alloy had two-mode behavior, which includes A₁(LO), E₁(TO), and E₂(H). Thus, these results are in agreement with the theoretical results of PUC model, which also revealed a two-mode behavior for the quaternary nitride. We also obtained new values of E₁(TO) and E₂(H) for the quaternary nitride samples that have not yet been reported in the literature.     

Structural and optical properties of an InxGa1−xN/GaN nanostructure

The structural and optical properties of an In_xGa_1−xN/GaN multi-quantum well (MQW) were investigated by using X-ray diffraction (XRD), atomic force microscopy (AFM), spectroscopic ellipsometry (SE) and photoluminescence (PL). The MQW structure was grown on c-plane (0 0 0 1)-faced sapphire substrates in a low pressure metalorganic chemical vapor deposition (MOCVD) reactor. The room temperature photoluminescence spectrum exhibited a blue emission at 2.84 eV and a much weaker and broader yellow emission band with a maximum at about 2.30 eV. In addition, the optical gaps and the In concentration of the structure were estimated by direct interpretation of the pseudo-dielectric function spectrum. It was found that the crystal quality of the InGaN epilayer is strongly related with the Si doped GaN layer grown at a high temperature of 1090 °C. The experimental results show that the growth MQW on the high-temperature (HT) GaN buffer layer on the GaN nucleation layer (NL) can be designated as a method that provides a high performance InGaN blue light-emitting diode (LED) structure.     

First principles investigation of optical properties of zinc-blende AlxGa1−xAs1−yNy materials

We have performed a first-principle Full Potential Linearized Augmented Plane Waves calculation within the local density approximation (LDA) to the zinc-blende Al_xGa_1−xAs_1−yN_y to predict its optical properties as a function of N and Al mole fractions. The accurate calculations of electronic properties such as band structures and optical properties like refractive index, reflectivity and absorption coefficient of Al_xGa_1−xAs and Al_xGa_1−xAs_1−yN_y with x≤0.375 and y up to 4% are presented. Al_xGa_1−xAs on GaAs have a lattice mismatch less than 0.16% and the lattice constant of Al_xGa_1−xAs has a derivation parameter of 0.0113±0.0024. The band gap energies are calculated by LDA and the band anticrossing model using a matrix element of C_MN=2.32 and a N level of E_N=(1.625+0.069x) eV. The results show that Al_xGa_1−xAs can be very useful as a barrier layer in separate confinement heterostructure lasers and indicate that the best choice of x and y Al_xGa_1−xAs_1−yN_y could be an alternative to Al_xGa_1−xAs when utilized as active layers in quantum well lasers and high-efficiency solar cell structures.     

Effects of the passivation of SiNx with various growth stoichiometry on the high temperature transport properties of the two-dimensional electron gas in AlxGa1−xN/GaN heterostructures

Effects of the passivation of SiN_x on the high temperature transport characteristics of the two-dimensional electron gas (2DEG) in unintentionally doped Al_xGa_1−xN/GaN heterostructures have been investigated by means of high temperature Hall measurements. The 2DEG density increases much after SiN_x passivation, and the increment is proportional to the Si content in SiN_x layer, indicating that the increment is mainly caused by ionized Si atoms at the SiN/Al_xGa_1−xN interface with dangling bonds or by Si atoms incorporated into the Al_xGa_1−xN layer during the SiN_x growth, which is approved by strain analysis and X-ray photoemission spectroscopy (XPS). There is lower 2DEG mobility at room temperature in a passivated sample than in an unpassivated one. However, the 2DEG mobility becomes to be higher in a passivated sample than in an unpassivated one when the temperature is above 250 °C, which is suggested to be caused by different subband occupation ratios in the triangular quantum well at the heterointerface before and after passivation.     

The influence of chemical treatment and thermal annealing on AlxGa1−xN surfaces: An XPS study

The influences of chemical treatment and thermal annealing of Al_xGa_1−xN (x = 0.20) have been investigated by X-ray photoelectron spectroscopy (XPS). XPS analysis showed that successive chemical treatments and annealing produced changes in the stoichiometry of the Al_xGa_1−xN surface, with the surface concentration of N increasing and Al and Ga decreasing with increasing temperature. Band bending occurred at the Al_xGa_1−xN surface, in parallel with the observed changes in stoichiometry. These results are discussed in the context of the creation of surface states via the activation of vacancies and induced by defects. These findings point towards the possibility of selecting and/or engineering the band structure at Al_xGa_1−xN surfaces through a combination of surface preparation and annealing.     

The role of strain in controlling the surface morphology of AlxGa1−xN following in situ treatment with SiH4 and NH3

Treatment of GaN with SiH₄ and NH₃ increases the size of surface pits associated with threading dislocations, allowing them to be easily imaged by atomic force microscopy. Here, we assess the effect of a similar treatment on Al_xGa_1−xN surfaces for x ≤ 0.4. For relaxed Al_xGa_1−xN epilayers, an increase in the observed size and density of threading dislocation pits is observed. However, if the Al_xGa_1−xN is under tensile strain, the treatment results in the appearance of nanometre-scale surface hillocks. These hillocks may prevent observation of the dislocation pits. The hillocks are found to consist of crystalline Al_xGa_1−xN, and hence are suggested to be formed by strain driven etching or transformation of the surface by SiH₄ and NH₃.     

Magnetotransport, optical, and electronic subband properties in AlxGa1−xN/AlN/GaN heterostructures

The Shubnikov-de Haas (S-dH) results at 1.5 K for Al_xGa_1−xN/AlN/GaN heterostructures and the fast Fourier transformation data for the S-dH data indicated the occupation by a two-dimensional electron gas (2DEG) of one subband in the GaN active layer. Photoluminescence (PL) spectra showed a broad PL emission about 30 meV below the GaN exciton emission peak at 3.474 eV that could be attributed to recombination between the 2DEG occupying in the AlN/GaN heterointerface and photoexcited holes. A possible subband structure was calculated by a self-consistent method taking into account the spontaneous and piezoelectric polarizations, and one subband was occupied by 2DEG below the Fermi level, which was in reasonable agreement with the S-dH results. These results can help improve understanding of magnetotransport, optical, and electronic subband properties in Al_xGa_1−xAs/AlN/GaN heterostructures.     

Numerical optimization of carrier confinement characteristics in (AlxGa1−xN/AlN)SLs/GaN heterostructures

We present numerical optimization of carrier confinement characteristics in (Al_xGa_1−xN/AlN)SLs/GaN heterostructures in the presence of spontaneous and piezoelectrically induced polarization effects. The calculations were made using a self-consistent solution of the Schrödinger, Poisson, potential and charge balance equations. It is found that the sheet carrier density in GaN channel increases nearly linearly with the thickness of AlN although the whole thickness and equivalent Al composition of Al_xGa_1−xN/AlN superlattices (SLs) barrier are kept constant. This result leads to the carrier confinement capability approaches saturation with thicknesses of AlN greater than 0.6 nm. Furthermore, the influence of carrier concentration distribution on carrier mobility was discussed. Theoretical calculations indicate that the achievement of high sheet carrier density is a trade-off with mobility.     

Fabrication and hard X-ray photoemission analysis of photocathodes with sharp solar-blind sensitivity using AlGaN films grown on Si substrates

Photocathode devices operating in reflection-mode, where the photoemission is detected on the same side as the light irradiation, were developed for the detection of deep ultraviolet light by using p-Al_xGa_1−xN films grown on Si(1 1 1) substrates. The external quantum efficiencies were as high as 20-15% at 200 nm and 280 nm, while the value was as low as 10⁻²% at 310 nm. The on-off ratio was more than four orders of magnitude, which represents high solar-blind sensitivity. The escape probability of Al_xGa_1−xN photocathode was decreased with increase of AlN mole fraction. The effective barrier potential against the photoelectron emission near the surface was reduced due to the upward shift of conduction band of Al_xGa_1−xN. The photoemission from the Al_xGa_1−xN films terminated with Cs-O adatoms will be discussed in terms of band diagrams that were evaluated by hard X-ray photoelectron spectroscopy.     

The effect of InxGa1−xN back-barriers on the dislocation densities in Al0.31Ga0.69N/AlN/GaN/InxGa1−xN/GaN heterostructures (0.05 ≤ x ≤ 0.14)

Al_0.31Ga_0.69N/AlN/GaN/In_xGa_1?xN/GaN heterostructures grown with the metal-organic chemical vapor deposition (MOCVD) technique with different In_xGa_1?xN back-barriers with In mole fractions of 0.05 ≤ x ≤ 0.14 were investigated by using XRD measurements. Screw, edge, and total dislocations, In mole fraction of back-barriers, Al mole fraction, and the thicknesses of front-barriers and lattice parameters were calculated. Mixed state dislocations with both edge and screw type dislocations were observed. The effects of the In mole fraction difference in the back-barrier and the effect of the thickness of front-barrier on crystal quality are discussed. With the increasing In mole fraction, an increasing dislocation trend is observed that may be due to the growth temperature difference between ultrathin In_xGa_1?xN back-barrier and the surrounding layers.     

Numerical optimization of In-mole fractions and layer thicknesses in AlxGa1−xN/AlN/GaN high electron mobility transistors with InGaN back barriers

The effects of the In-mole fraction (x) of an In_xGa_1−xN back barrier layer and the thicknesses of different layers in pseudomorphic Al_yGa_1−yN/AlN/GaN/In_xGa_1−xN/GaN heterostructures on band structures and carrier densities were investigated with the help of one-dimensional self-consistent solutions of non-linear Schrödinger-Poisson equations. Strain relaxation limits were also calculated for the investigated Al_yGa_1−yN barrier layer and In_xGa_1−xN back barriers. From an experimental point of view, two different optimized structures are suggested, and the possible effects on carrier density and mobility are discussed.     

Theoretical research on optical properties and quantum efficiency of Ga1−xAlxN photocathodes

In order to design the optimal component structure of transmission-mode (t-mode) Ga_1−xAl_xN photocathode, the optical properties and quantum efficiency of Ga_1−xAl_xN photocathodes are simulated. Based on thin film principle, optical model of t-mode Ga_1−xAl_xN photocathodes is built. And the quantum efficiency formula is put forward. Results show that Ga_1−xAl_xN photocathodes can satisfy the need of detectors with “solar blind” property when the Al component is bigger than 0.375. There is an optimal thickness of Ga_1−xAl_xN layer to get highest quantum efficiency, and the optimal thickness is 0.3 μm. There is close relation between absorptivity and quantum efficiency, which is in good agreement with the “three-step” model. This work gives a reference for the experimental research on the Ga_1−xAl_xN photocathodes.     

Dependence of the interband transitions on the in mole fraction and the applied electric field in InxGa1−xAs/In0.52Al0.48As multiple quantum wells

Transmission electron microscopy (TEM) and photocurrent (PC) measurements were carried out to investigate the microstructural properties and excitonic transitions in In_xGa_1−xAs/In_0.52Al_0.48As multiple quantum wells (MQWs) for x = 0.54, 0.57 and 0.60. TEM images showed that high-quality 11-period In_xGa_1−xAs/In_0.52Al_0.48As MQWs had high-quality heterointerfaces. The results for the PC spectra at 300 K showed that the peaks corresponding to the excitonic transitions from the ground state electronic sub-band to the ground state heavy-hole band (E₁-HH₁) and the ground state electronic sub-band to the ground state light-hole band (E₁-LH₁) became closer to each other with decreasing In mole fraction and that E₁-HH₁ and E₁-LH₁ excitonic peaks shifted to longer wavelength with increasing applied electric field. The calculated values of the E₁-HH₁ interband transition energies were in qualitative agreement with those obtained form the PC measurements with and without applied electric field. These results can be helpful in understanding potential applications of In_xGa_1−xAs/In_yAl_1−yAs MQWs dependent on In mole fraction and applied electric field in long-wavelength optoelectronic devices.     

Optical properties of high-Al-content crack free AlxGa1−xN (x<0.67) films grown on Si(111) by molecular-beam epitaxy

We report on the optical properties of high-Al-content crack free Al_xGa_1−xN (x<0.67) films grown by molecular-beam epitaxy on Si(111) substrates using ammonia as nitrogen source. The energetic position of the A free exciton as a function of the Al content is determined from photoluminescence and reflectivity measurements at low temperature. A bowing parameter of b=1 eV is deduced from these measurements. The excitonic linewidth increases as a function of Al concentration. The observed variation agrees very well with the one calculated using a model in which the broadening effect is assumed to be due to alloy compositional disordering.     

The dependence of the structural and optical properties on the Te mole fraction in ZnS1−xTex/GaAs heterostructures

Lattice-mismatched ZnS_1−xTe_x epilayers with various Te mole fractions on GaAs (100) substrates were grown by double well temperature gradient vapor deposition. X-ray diffraction patterns showed that the grown ZnS_1−xTe_x layers were epitaxial films. The photoluminescence spectra showed that the peak position of the acceptor-bound exciton (A⁰, X) varied dramatically with changing the Te mole fraction and that the behavior of the (A⁰, X) peak position of the ZnS_1−xTe_x epilayers with a small amount of the Te mole fraction was attributed to a bowing effect. The reflectivity and ellipsometry spectra showed that the absorption energy peak was significantly affected due to the Stoke's effect. These results provide important information on the structural and optical properties of ZnS_1−xTe_x/GaAs heterostructures for improving optoelectronic device efficiencies operating in the spectral range between near ultraviolet and visible regions.     

Study on the electronic structure and optical properties of different Al constituent Ga1−xAlxAs

Using quantum mechanics GASTEP software package based on the first principle density function theory, the electronic structure and optical properties of Ga_1−xAl_xAs at different Al constituent are calculated. Result shows that with the increase of Al constituent, the band gap of Ga_1−xAl_xAs increases and varies from direct band gap to indirect band gap; the absorption band edge and the absorption peak move to high-energy side; the static reflectivity decreases. With the increasing of the incident photon energy, Ga_1−xAl_xAs shows metal reflective properties in certain energy range. With the increasing of Al constituent, static dielectric constant decreases and the intersection of dielectric function and the x-axis move towards high-energy side; the peak of energy loss function move to low-energy side and the peak value reduces.     

Band-edge exciton transitions in (Ga1−xMnx)N diluted magnetic semiconductor films with above room temperature ferromagnetic transition

(Ga_1−xMn_x)N thin films grown on GaN buffer layers by using molecular beam epitaxy were investigated with the goal of producing diluted magnetic semiconductors (DMSs) with band-edge exciton transitions for applications in optomagnetic devices. The magnetization curve as a function of the magnetic field at 5 K indicated that ferromagnetism existed in the (Ga_1−xMn_x)N thin films, and the magnetization curve as a function of the temperature showed that the ferromagnetic transition temperature of the (Ga_1−xMn_x)N thin film was above room temperature. Photoluminescence and photoluminescence excitation spectra showed that band-edge exciton transitions in (Ga_1−xMn_x)N thin films appeared. These results indicate that the (Ga_1−xMn_x)N DMSs with a magnetic single phase hold promise for potential applications in spin optoelectronic devices in the blue region of the spectrum.