Silicene,a promising new 2D material

Silicene is emerging as a two-dimensional material with very attractive electronic properties for a wide range of applications; it is a particularly promising material for nano-electronics in silicon-based technology. Over the last decade, the existence and stability of silicene has been the subject of much debate. Theoretical studies were the first to predict a puckered honeycomb structure with electronic properties resembling those of graphene. Though these studies were for free-standing silicene, experimental fabrication of silicene has been achieved so far only through epitaxial growth on crystalline surfaces. Indeed, it was only in 2010 that researchers presented the first experimental evidence of the formation of silicene on Ag(1 1 0) and Ag(1 1 1), which has launched silicene in a similar way to graphene. This very active field has naturally led to the recent growth of silicene on Ir(1 1 1), ZrB₂(0 0 0 1) and Au(1 1 0) substrates. However, the electronic properties of epitaxially grown silicene on metal surfaces are influenced by the strong silicene–metal interactions. This has prompted experimental studies of the growth of multi-layer silicene, though the nature of its “silicene” structure remains questionable. Of course, like graphene, synthesizing free-standing silicene represents the ultimate challenge. A first step towards this has been reported recently through chemical exfoliation from calcium disilicide (CaSi₂). In this review, we discuss the experimental and theoretical studies of silicene performed to date. Special attention is given to different experimental studies of the electronic properties of silicene on metal substrates. New avenues for the growth of silicene on other substrates with different chemical characteristics are presented along with foreseeable applications such as nano-devices and novel batteries.     

Nanoarchitectured Graphene‐Based Supercapacitors for Next‐Generation Energy‐Storage Applications

Tremendous development in the field of portable electronics and hybrid electric vehicles has led to urgent and increasing demand in the field of high‐energy storage devices. In recent years, many research efforts have been made for the development of more efficient energy‐storage devices such as supercapacitors, batteries, and fuel cells. In particular, supercapacitors have great potential to meet the demands of both high energy density and power density in many advanced technologies. For the last half decade, graphene has attracted intense research interest for electrical double‐layer capacitor (EDLC) applications. The unique electronic, thermal, mechanical, and chemical characteristics of graphene, along with the intrinsic benefits of a carbon material, make it a promising candidate for supercapacitor applications. This Review focuses on recent research developments in graphene‐based supercapacitors, including doped graphene, activated graphene, graphene/metal oxide composites, graphene/polymer composites, and graphene‐based asymmetric supercapacitors. The challenges and prospects of graphene‐based supercapacitors are also discussed.     

Recent progress in applications of graphene oxide for gas sensing: A review

This paper is a review of the recent progress on gas sensors using graphene oxide (GO). GO is not a new material but its unique features have recently been of interest for gas sensing applications, and not just as an intermediate for reduced graphene oxide (RGO). Graphene and RGO have been well known gas-sensing materials, but GO is also an attractive sensing material that has been well studied these last few years. The functional groups on GO nanosheets play important roles in adsorbing gas molecules, and the electric or optical properties of GO materials change with exposure to certain gases. Addition of metal nanoparticles and metal oxide nanocomposites is an effective way to make GO materials selective and sensitive to analyte gases. In this paper, several applications of GO based sensors are summarized for detection of water vapor, NO₂, H₂, NH₃, H₂S, and organic vapors. Also binding energies of gas molecules onto graphene and the oxygenous functional groups are summarized, and problems and possible solutions are discussed for the GO-based gas sensors.     

Influence of ambient conditions on the electronic structure of graphene/copper interface

Graphene films grown on the copper foils using chemical vapor deposition have been emphasized in the previous scientific studies and technical applications because of the high quality/cost ratio. However, no enough attention has been paid to the fundamentally important issue on the stability of graphene/copper interface compared with quality of the grown graphene films, though the properties of graphene/metal interface largely affect the Ohmic contacts in graphene‐based electronics (e.g. high‐frequency graphene transistors). Here, we investigated the electronic structure of graphene/copper interface which has been stored in the ambient conditions for different periods. Raman and photoelectron spectroscopic data indicated that the oxygen species do not prefer to adsorb on the graphene surface but insert into the graphene/copper interface. This results in the p‐doping of graphene, formation of the surface positive dipole, and energy upshift of the graphene's Dirac point. Copyright © 2015 John Wiley & Sons, Ltd.     

From nanographene and graphene nanoribbons to graphene sheets: chemical synthesis

Graphene, an individual two-dimensional, atomically thick sheet of graphite composed of a hexagonal network of sp(2) carbon atoms, has been intensively investigated since its first isolation in 2004, which was based on repeated peeling of highly oriented pyrolyzed graphite (HOPG). The extraordinary electronic, thermal, and mechanical properties of graphene make it a promising candidate for practical applications in electronics, sensing, catalysis, energy storage, conversion, etc. Both the theoretical and experimental studies proved that the properties of graphene are mainly dependent on their geometric structures. Precise control over graphene synthesis is therefore crucial for probing their fundamental physical properties and introduction in promising applications. In this Minireview, we highlight the recent progress that has led to the successful chemical synthesis of graphene with a range of different sizes and chemical compositions based on both top-down and bottom-up strategies.     

A First‐Principles Study of Lithium Adsorption on a Graphene–Fullerene Nanohybrid System

The mechanism of Li adsorption on a graphene–fullerene (graphene–C₆₀) hybrid system has been investigated using density functional theory (DFT). The adsorption energy for Li atoms on the graphene–C₆₀ hybrid system (?2.285 eV) is found to be higher than that on bare graphene (?1.375 eV), indicating that the Li adsorption on the former system is more stable than on the latter. This is attributed to the high affinity of Li atoms to C₆₀ and the charge redistribution that occurs after graphene is mixed with C₆₀. The electronic properties of the graphene–C₆₀ system such as band structure, density of states, and charge distribution have been characterized as a function of the number of Li atoms adsorbed in comparison to those of the pure graphene and C₆₀. Li adsorption is found to preferentially occur on the C₆₀ side due to the high adsorption energy of Li on C₆₀, which imparts a metallic character to the C₆₀ in the graphene–C₆₀ hybrid system.     

The Toxicity of Graphene Oxides: Dependence on the Oxidative Methods Used

Graphene, a class of two‐dimensional carbon nanomaterial, has attracted extensive interest in recent years, with a significant amount of research focusing on graphene oxides (GOs). They have been primed as potential candidates for biomedical applications such as cell labeling and drug delivery, thus the toxicity and behavior of graphene oxides in biological systems are fundamental issues that need urgent attention. The production of GO is generally achieved through a top‐down route, which includes the usage of concentrated H₂SO₄ along with: 1) concentrated nitric acid and KClO₃ oxidant (Hoffmann); 2) fuming nitric acid and KClO₃ oxidant (Staudenmaier); 3) concentrated phosphoric acid with KMnO₄ (Tour); or 4) sodium nitrate for in‐situ production of nitric acid in the presence of KMnO₄ (Hummers). It has been widely assumed that the properties of these four GOs produced by using the above different methods are roughly similar, so the methods have been used interchangeably. However, several studies have reported that the toxicity of graphene‐related nanomaterials in biological systems may be influenced by their physiochemical properties, such as surface functional groups and structural defects. In addition, considering how GOs are increasingly used in the field of biomedicine, we are interested to see how the oxygen content/functional groups of GOs can impact their toxicological profiles. Since in‐vitro testing is a common first step in assessing the health risks related with engineered nanomaterials, the cytotoxicity of the GOs prepared by the four different oxidative treatments was investigated by measuring the mitochondrial activity in adherent lung epithelial cells (A549) by using commercially available viability assays. The dose–response data was generated by using two assays, the methylthiazolyldiphenyl‐tetrazolium bromide (MTT) assay and the water‐soluble tetrazolium salt (WST‐8). From the viability data, it is evident that there is a strong dose‐dependent cytotoxic response resulting from the four GO nanomaterials tested after a 24 h exposure, and it is suggested that there is a correlation between the amounts of oxygen content/functional groups of GOs with their toxicological behavior towards the A549 cells.     

Core–Shell Pd@M (M=Ni,Cu, Co) Nanoparticles/Graphene Ensembles with High Mass Electrocatalytic Activity Toward the Oxygen Reduction Reaction

Herein, it is demonstrated that pyrene butyric acid (PBA)-stabilized metal nanoparticles with core–shell morphology, Pd@M_NPs (M=Ni, Cu, Co), non-covalently supported on graphene (G) sheets, are more active towards oxygen electroreduction in alkaline environments than the benchmark Pd/C catalyst, albeit with a 70 % lower precious metal loading. The PBA-stabilized Pd@M_NPs (M=Ni, Cu, Co)/G ensembles were prepared by employing a simple modified polyol method and galvanic replacement and thoroughly characterized with advanced microscopy imaging and complementary spectroscopic techniques. Electrochemical studies revealed that Pd@Ni_NPs/G presents the optimum performance, exhibiting a 30 mV more positive onset potential and 3.2 times greater mass activity over Pd/C. Moreover, chronoamperometric assays showed the minimum activity loss for Pd@Ni_NPs/G, not only among its core–shell counterparts but importantly when compared with the benchmark catalyst. The excellent performance of Pd@Ni_NPs/G was attributed to the (a) presence of PBA as stabilizer, (b) uniform Pd@Ni_NPs dispersion onto the graphene sheets, (c) efficient intra-ensemble interactions between the two species, (d) existence of the core–shell structure for Pd@Ni_NPs, and (e) stability of the Ni core metal under the reaction conditions. Last, the oxygen reduction on Pd@Ni_NPs/graphene occurs by the direct four-electron reduction pathway, showing great potential for use in energy related applications.     

n‐Type Reduced Graphene Oxide Field‐Effect Transistors (FETs) from Photoactive Metal Oxides

Graphene is of considerable interest as a next‐generation semiconductor material to serve as a possible substitute for silicon. For real device applications with complete circuits, effective n‐type graphene field effect transistors (FETs) capable of operating even under atmospheric conditions are necessary. In this study, we investigated n‐type reduced graphene oxide (rGO) FETs of photoactive metal oxides, such as TiO₂ and ZnO. These metal oxide doped FETs showed slight n‐type electric properties without irradiation. Under UV light these photoactive materials readily generated electrons and holes, and the generated electrons easily transferred to graphene channels. As a result, the graphene FET showed strong n‐type electric behavior and its drain current was increased. These n‐doping effects showed saturation curves and slowly returned back to their original state in darkness. Finally, the n‐type rGO FET was also highly stable in air due to the use of highly resistant metal oxides and robust graphene as a channel.     

Thin metal nanostructures: synthesis,properties and applications

Two-dimensional nanomaterials, especially graphene and single- or few-layer transition metal dichalcogenide nanosheets, have attracted great research interest in recent years due to their distinctive physical, chemical and electronic properties as well as their great potentials for a broad range of applications. Recently, great efforts have also been devoted to the controlled synthesis of thin nanostructures of metals, one of the most studied traditional materials, for various applications. In this minireview, we review the recent progress in the synthesis and applications of thin metal nanostructures with a focus on metal nanoplates and nanosheets. First of all, various methods for the synthesis of metal nanoplates and nanosheets are summarized. After a brief introduction of their properties, some applications of metal nanoplates and nanosheets, such as catalysis, surface enhanced Raman scattering (SERS), sensing and near-infrared photothermal therapy are described.     

Hybrid Fibers Made of Molybdenum Disulfide,Reduced Graphene Oxide,and Multi‐Walled Carbon Nanotubes for Solid‐State,Flexible, Asymmetric Supercapacitors

One of challenges existing in fiber‐based supercapacitors is how to achieve high energy density without compromising their rate stability. Owing to their unique physical, electronic, and electrochemical properties, two‐dimensional (2D) nanomaterials, e.g., molybdenum disulfide (MoS₂) and graphene, have attracted increasing research interest and been utilized as electrode materials in energy‐related applications. Herein, by incorporating MoS₂ and reduced graphene oxide (rGO) nanosheets into a well‐aligned multi‐walled carbon nanotube (MWCNT) sheet followed by twisting, MoS₂‐rGO/MWCNT and rGO/MWCNT fibers are fabricated, which can be used as the anode and cathode, respectively, for solid‐state, flexible, asymmetric supercapacitors. This fiber‐based asymmetric supercapacitor can operate in a wide potential window of 1.4 V with high Coulombic efficiency, good rate and cycling stability, and improved energy density.     

Computational Studies on Non‐covalent Interactions of Carbon and Boron Fullerenes with Graphene

First‐principles DFT calculations are carried out to study the changes in structures and electronic properties of two‐dimensional single‐layer graphene in the presence of non‐covalent interactions induced by carbon and boron fullerenes (C₆₀, C₇₀, C₈₀ and B₈₀). Our study shows that larger carbon fullerene interacts more strongly than the smaller fullerene, and boron fullerene interacts more strongly than that of its carbon analogue with the same nuclearity. We find that van der Waals interactions play a major role in governing non‐covalent interactions between the adsorbed fullerenes and graphene. Moreover, a greater extent of van der Waals interactions found for the larger fullerenes, C₈₀ and B₈₀, relative to smaller C₆₀, and consequently, results in higher stabilisation. We find a small amount of electron transfer from graphene to fullerene, which gives rise to a hole‐doped material. We also find changes in the graphene electronic band structures in the presence of these surface‐decorated fullerenes. The Dirac cone picture, such as that found in pristine graphene, is significantly modified due to the re‐hybridisation of graphene carbon orbitals with fullerenes orbitals near the Fermi energy. However, all of the composites exhibit perfect conducting behaviour. The simulated absorption spectra for all of the graphene–fullerene hybrids do not exhibit a significant change in the absorption peak positions with respect to the pristine graphene absorption spectrum. Additionally, we find that the hole‐transfer integral between graphene and C₆₀ is larger than the electron‐transfer integrals and the extent of these transfer integrals can be significantly tuned by graphene edge functionalisation with carboxylic acid groups. Our understanding of the non‐covalent functionalisation of graphene with various fullerenes would promote experimentalists to explore these systems, for their possible applications in electronic and opto‐electronic devices.     

Rapid and Direct Conversion of Graphite Crystals into High‐Yielding,Good‐Quality Graphene by Supercritical Fluid Exfoliation

Graphene has attracted a great deal of attention in recent years due to its unusual electronic, mechanical, and thermal properties. Exploiting graphene properties in a variety of applications requires a chemical approach for the large‐scale production of high‐quality, processable graphene sheets (GS), which has remained an unanswered challenge. Herein, we report a rapid one‐pot supercritical fluid (SCF) exfoliation process for the production of high‐quality, large‐scale, and processable graphene for technological applications. Direct high‐yield conversion of graphite crystals to GS is possible under SCF conditions because of the high diffusivity and solvating power of SCFs, such as ethanol, N‐methyl‐pyrrolidone (NMP), and DMF. For the first time, we report a one‐pot direct conversion of graphite crystals to a high yield of graphene sheets in which about 90–95 % of the exfoliated sheets are <8 layers with approximately 6–10 % monolayers and the remaining 5–10 % are ≥10 layers.     

Ultrafast Delamination of Graphite into High-Quality Graphene Using Alternating Currents

To bridge the gap between laboratory-scale studies and commercial applications, mass production of high quality graphene is essential. A scalable exfoliation strategy towards the production of graphene sheets is presented that has excellent yield (ca. 75 %, 1–3 layers), low defect density (a C/O ratio of 21.2), great solution-processability, and outstanding electronic properties (a hole mobility of 430 cm² V⁻¹ s⁻¹). By applying alternating currents, dual exfoliation at both graphite electrodes enables a high production rate exceeding 20 g h⁻¹ in laboratory tests. As a cathode material for lithium storage, graphene-wrapped LiFePO₄ particles deliver a high capacity of 167 mAh g⁻¹ at 1 C rate after 500 cycles.     

Interaction of Inorganic Nanoparticles with Graphene

The changes in the electronic and magnetic properties of graphene induced by interaction with semiconducting oxide nanoparticles such as ZnO and TiO₂ and with magnetic nanoparticles such as Fe₃O₄, CoFe₂O₄, and Ni are investigated by using Raman spectroscopy, magnetic measurements, and first‐principles calculations. Significant electronic and magnetic interactions between the nanoparticles and graphene are found. The findings suggest that changes in magnetization as well as the Raman shifts are directly linked to charge transfer between the deposited nanoparticles and graphene. The study thus demonstrates significant effects in tailoring the electronic structure of graphene for applications in futuristic electronic devices.     

Improving Catalyst Activity in Hydrocarbon Functionalization by Remote Pyrene–Graphene Stacking

A copper complex bearing an N-heterocyclic carbene ligand with a pyrene “tail” attached to the backbone has been prepared and supported on reduced graphene oxide (rGO). The free and supported copper materials have been employed as homogeneous and heterogeneous catalysts in the functionalization of hydrocarbons such as n-hexane, cyclohexane, and benzene through incorporation of the CHCO₂Et unit from ethyl diazoacetate. The graphene-anchored complex displays higher reaction rates and induces higher yields than its soluble counterpart, features that can be rationalized in terms of a decrease in electron density at the metal center due to a remote net electronic flux from the supported copper complex to the graphene surface.     

Transition Metal (Mn,Fe, Co,Ni)‐Doped Graphene Hybrids for Electrocatalysis

The development of electrocatalysts is crucial for renewable energy applications. Metal‐doped graphene hybrid materials have been explored for this purpose, however, with much focus on noble metals, which are limited by their low availability and high costs. Transition metals may serve as promising alternatives. Here, transition metal‐doped graphene hybrids were synthesized by a simple and scalable method. Metal‐doped graphite oxide precursors were thermally exfoliated in either hydrogen or nitrogen atmosphere; by changing exfoliation atmospheres from inert to reductive, we produced materials with different degrees of oxidation. Effects of the presence of metal nanoparticles and exfoliation atmosphere on the morphology and electrocatalytic activity of the hybrid materials were investigated using electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy, and cyclic voltammetry. Doping of graphene with transition metal nanoparticles of the 4th period significantly influenced the electrocatalysis of compounds important in energy production and storage applications, with hybrid materials exfoliated in nitrogen atmosphere displaying superior performance over those exfoliated in hydrogen atmosphere. Moreover, nickel‐doped graphene hybrids displayed outstanding electrocatalytic activities towards reduction of O₂ when compared to bare graphenes. These findings may be exploited in the research field of renewable energy.     

Pd‐Nanoparticle‐Supported,PDDA‐Functionalized Graphene as a Promising Catalyst for Alcohol Oxidation

Poly(diallyldimethylammonium chloride) (PDDA) has been employed as a modifying material for the development of new functional materials; then, the functionalized graphene was employed as a support for Pd nanoparticles through a facile method. The structures and morphologies of the as‐synthesized Pd/PDDA–graphene composites were extensively characterized by Raman spectroscopy, XRD, XPS, and TEM. Morphological observation showed that Pd NPs with average diameters of 4.4 nm were evenly deposited over the functionalized graphene sheets. Moreover, the electrochemical experiments indicated that the Pd/PDDA–graphene catalyst showed improved electrocatalytic activity toward alcohol‐oxidation reactions compared to the Pd/graphene and commercial Pd/C systems, as well as previously reported Pd‐based catalysts. This study demonstrates the great potential of PDDA‐functionalized graphene as a support for the development of metal–graphene nanocomposites for important applications in fuel cells.     

The Application of Graphene and Its Derivatives to Energy Conversion,Storage, and Environmental and Biosensing Devices

Graphene (GR) and its derivatives are promising materials on the horizon of nanotechnology and material science and have attracted a tremendous amount of research interest in recent years. The unique atom‐thick 2D structure with sp² hybridization and large specific surface area, high thermal conductivity, superior electron mobility, and chemical stability have made GR and its derivatives extremely attractive components for composite materials for solar energy conversion, energy storage, environmental purification, and biosensor applications. This review gives a brief introduction of GR's unique structure, band structure engineering, physical and chemical properties, and recent energy‐related progress of GR‐based materials in the fields of energy conversion (e.g., photocatalysis, photoelectrochemical water splitting, CO₂ reduction, dye‐sensitized and organic solar cells, and photosensitizers in photovoltaic devices) and energy storage (batteries, fuel cells, and supercapacitors). The vast coverage of advancements in environmental applications of GR‐based materials for photocatalytic degradation of organic pollutants, gas sensing, and removal of heavy‐metal ions is presented. Additionally, the use of graphene composites in the biosensing field is discussed. We conclude the review with remarks on the challenges, prospects, and further development of GR‐based materials in the exciting fields of energy, environment, and bioscience.